Index: sysutils/py-qmk/Makefile
===================================================================
--- sysutils/py-qmk/Makefile
+++ sysutils/py-qmk/Makefile
@@ -1,5 +1,5 @@
 PORTNAME=	qmk
-DISTVERSION=	0.1.1
+DISTVERSION=	1.0.0
 CATEGORIES=	sysutils python
 MASTER_SITES=	CHEESESHOP
 PKGNAMEPREFIX=	${PYTHON_PKGNAMEPREFIX}
@@ -21,10 +21,10 @@
 		${PYTHON_PKGNAMEPREFIX}pyrsistent>=0:devel/py-pyrsistent@${PY_FLAVOR} \
 		${PYTHON_PKGNAMEPREFIX}pyusb>=0:devel/py-pyusb@${PY_FLAVOR} \
 		${PYTHON_PKGNAMEPREFIX}yapf>=0:textproc/py-yapf@${PY_FLAVOR} \
-		arm-none-eabi-gcc>0:devel/arm-none-eabi-gcc \
 		avr-gcc>0:devel/avr-gcc \
 		avr-libc>0:devel/avr-libc \
 		avrdude>0:devel/avrdude \
+		gcc-arm-embedded>0:devel/gcc-arm-embedded \
 		dfu-programmer>0:comms/dfu-programmer \
 		dfu-util>0:comms/dfu-util \
 		git:devel/git
@@ -33,6 +33,9 @@
 USE_PYTHON=	autoplist concurrent distutils
 SHEBANG_GLOB=	*.py
 
+post-patch:
+	@${ECHO_CMD} 'import setuptools; setuptools.setup()' > ${WRKSRC}/setup.py
+
 TEST_ENV=	PYTHONPATH="${STAGEDIR}${PYTHONPREFIX_SITELIBDIR}"
 TEST_TARGET=	config
 DO_MAKE_TEST=	${SETENV} ${TEST_ENV} ${STAGEDIR}${PREFIX}/bin/qmk >/dev/null
Index: sysutils/py-qmk/distinfo
===================================================================
--- sysutils/py-qmk/distinfo
+++ sysutils/py-qmk/distinfo
@@ -1,3 +1,3 @@
-TIMESTAMP = 1625841155
-SHA256 (qmk-0.1.1.tar.gz) = a01a2feac8f22377bf460576ece0ff992f9a3106bc58e7d93975d30c78dde568
-SIZE (qmk-0.1.1.tar.gz) = 8788
+TIMESTAMP = 1640251427
+SHA256 (qmk-1.0.0.tar.gz) = da62eec73c4548cc37b0b9be3937202dc3a301dc2f2663610ecca751a610f9ca
+SIZE (qmk-1.0.0.tar.gz) = 12003
Index: sysutils/py-qmk/files/pkg-message.in
===================================================================
--- sysutils/py-qmk/files/pkg-message.in
+++ sysutils/py-qmk/files/pkg-message.in
@@ -12,6 +12,18 @@
 The reason for this is that the qmk_firmware scripts which are downloaded
 during the setup expect python3 to be installed (instead of %%PYTHON_CMD%%).
 
+Path Setup for GCC
+==================
+
+You need to prepend the full path to avr-gcc to your path for QMK to compile
+things properly, i.e.:
+
+$ PATH=%%LOCALBASE%%/gcc-arm-embedded-10-2020-q4-major/bin:$PATH
+
+  or
+
+$ alias qmk="PATH=/usr/local/gcc-arm-embedded-10-2020-q4-major/bin:$PATH qmk"
+
 Granting Write Permissions to USB Controllers
 =============================================