diff --git a/databases/mariadb1011-server/files/pkg-message.in b/databases/mariadb1011-server/files/pkg-message.in
index 19d0db2a69df..8589380d09d6 100644
--- a/databases/mariadb1011-server/files/pkg-message.in
+++ b/databases/mariadb1011-server/files/pkg-message.in
@@ -1,28 +1,28 @@
 [
 { type: install
   message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc/mysql or %%PREFIX%%/etc. Sample
 configuration files are provided in %%PREFIX%%/etc/mysql
 and %%PREFIX%%/etc/mysql/conf.d.
 The rc(8) script no longer uses /var/db/mysql/my.cnf for configuration
 nor /var/db/mysql for logs and PID-file.
 
 This port does NOT include the mytop perl script, this is included in
 the MariaDB tarball but the most recent version can be found in the
 databases/mytop port
 
 %%WSREP%%Using wsrep clustering requires adding a configuration file.
 %%WSREP%%Copy %%PREFIX%%/etc/mysql/conf.d/wsrep.conf.sample to
 %%WSREP%%%%PREFIX%%/etc/mysql/conf.d/wsrep.conf and change what you need there.
 EOM
 }
 { type: upgrade
   message: <<EOM
 Remember to run mariadb-upgrade (with the optional --datadir=<dbdir> flag)
 the first time you start the MySQL server after an upgrade from an
 earlier version.
 EOM
 }
-
+]
diff --git a/databases/mariadb105-server/files/pkg-message.in b/databases/mariadb105-server/files/pkg-message.in
index 189a27624f5d..5117fc0b766a 100644
--- a/databases/mariadb105-server/files/pkg-message.in
+++ b/databases/mariadb105-server/files/pkg-message.in
@@ -1,24 +1,24 @@
 [
 { type: install
   message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc/mysql or %%PREFIX%%/etc. Sample
 configuration files are provided in %%PREFIX%%/etc/mysql
 and %%PREFIX%%/etc/mysql/conf.d.
 The rc(8) script no longer uses /var/db/mysql/my.cnf for configuration
 nor /var/db/mysql for logs and PID-file.
 
 This port does NOT include the mytop perl script, this is included in
 the MariaDB tarball but the most recent version can be found in the
 databases/mytop port
 EOM
 }
 { type: upgrade
   message: <<EOM
 Remember to run mariadb-upgrade (with the optional --datadir=<dbdir> flag)
 the first time you start the MySQL server after an upgrade from an
 earlier version.
 EOM
 }
-
+]
diff --git a/databases/mariadb106-server/files/pkg-message.in b/databases/mariadb106-server/files/pkg-message.in
index 19d0db2a69df..8589380d09d6 100644
--- a/databases/mariadb106-server/files/pkg-message.in
+++ b/databases/mariadb106-server/files/pkg-message.in
@@ -1,28 +1,28 @@
 [
 { type: install
   message: <<EOM
 MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for
 my.cnf. Please move existing my.cnf files from those paths to
 %%PREFIX%%/etc/mysql or %%PREFIX%%/etc. Sample
 configuration files are provided in %%PREFIX%%/etc/mysql
 and %%PREFIX%%/etc/mysql/conf.d.
 The rc(8) script no longer uses /var/db/mysql/my.cnf for configuration
 nor /var/db/mysql for logs and PID-file.
 
 This port does NOT include the mytop perl script, this is included in
 the MariaDB tarball but the most recent version can be found in the
 databases/mytop port
 
 %%WSREP%%Using wsrep clustering requires adding a configuration file.
 %%WSREP%%Copy %%PREFIX%%/etc/mysql/conf.d/wsrep.conf.sample to
 %%WSREP%%%%PREFIX%%/etc/mysql/conf.d/wsrep.conf and change what you need there.
 EOM
 }
 { type: upgrade
   message: <<EOM
 Remember to run mariadb-upgrade (with the optional --datadir=<dbdir> flag)
 the first time you start the MySQL server after an upgrade from an
 earlier version.
 EOM
 }
-
+]
diff --git a/devel/kyua/pkg-message b/devel/kyua/pkg-message
index 77d984faf722..1a265ac9c32d 100644
--- a/devel/kyua/pkg-message
+++ b/devel/kyua/pkg-message
@@ -1,15 +1,15 @@
 [
 {
 	message: <<EOD
 A tests group has been added and the tests user should be a member
 of it by default rather than nobody. You should update your password
 database to match (change the group from 65534 to 977 after updating).
 
 To do it, please run the following command:
 
 pw usermod -n tests -g tests
 EOD,
 	type : upgrade,
 	maximum_version: "0.13_5,3"
 }
-}
+]
diff --git a/editors/vim/pkg-message b/editors/vim/pkg-message
index 1def839e84fb..c89d22977b3b 100644
--- a/editors/vim/pkg-message
+++ b/editors/vim/pkg-message
@@ -1,11 +1,11 @@
 [
   { type: upgrade
     maximum_version: "9.0.0129"
     message: <<EOM
   Vim no longer installs or reads a system-wide vimrc. The only overridden
   defaults are those which provide FreeBSD-specific settings. Read through
   $VIMRUNTIME/defaults.vim to see Vim's defaults, and see ':h initialization'
   for the standard locations Vim looks for configuration files.
-    EOM
+EOM
   }
 ]
diff --git a/misc/openhab/files/pkg-message.in b/misc/openhab/files/pkg-message.in
index 4887eaf7c598..d848721c3b6c 100644
--- a/misc/openhab/files/pkg-message.in
+++ b/misc/openhab/files/pkg-message.in
@@ -1,113 +1,114 @@
 [
 { type: install
   message: <<EOM
 The openhab user interface writes to /var/db/openhab
 (config) and to %%ETCDIR%% (when installing add-onds).
 The config in %%ETCDIR%% is evaluated additionally to
 /var/db/openhab.
 
 See %%PREFIX%%/etc/rc.d/openhab for environment variables you need
 to set by hand (all "export"-ones) if you want to execute some of
 the openhab commands from the shell directly.
 
 When the openhab docs talk about "userdata", look into /var/db/openhab.
 
 Serial ports do not work with FreeBSD, see:
 	https://github.com/openhab/openhab1-addons/wiki/FreeBSD
 
 By default openhab tries to use IPv6. As FreeBSD does not support
 mapping IPV4 multicast addresses inside IPv6 addresses you will get
 the following error message:
 	[ERROR] [org.jupnp.transport.Router] - Unable to initialize network router: org.jupnp.transport.spi.InitializationException: Could not initialize MulticastReceiverImpl: java.net.SocketException: Invalid argument
 
 A workaround is to use the following rc.conf setting which will
 prefer IPv4 over IPv6:
 	openhab_java_opts="-Djava.net.preferIPv4Stack=true"
 
 OpenHAB contains some files/directories ending in .core, if you have
 	daily_clean_disks_enable="YES"
 for periodic runs (this is the default setting in /etc/default/periodic.conf), you should
 remove "*.core" from the daily_clean_disks_files setting in periodic.conf. Example:
 	daily_clean_disks_files="[#,]* .#* a.out *.CKP .emacs_[0-9]*"
 
 
 If you upgrade from a pevious version, make a backup of
 	/var/db/openhab
 and read about the breaking changes in the release notes at
 	https://github.com/openhab/openhab-distro/releases/
 
 You need to change some configs:
 	export OPENHAB_USERDATA=/var/db/openhab/userdata
 	sed -i'.bak' -e "s:,javascript::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:javascript,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:javascript::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:,cometvisu-php::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:cometvisu-php,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:cometvisu-php::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:,innogysmarthome::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:innogysmarthome,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:innogysmarthome::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:,imperihome::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:imperihome,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:imperihome::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:,darksky::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:darksky,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 	sed -i'.bak' -e "s:darksky::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 
 You may have to update the files in
 	/var/db/openhab/userdata/etc/
 from
 	%%DATADIR%%/etc/
 by hand.
 
 At the end you need to run
 	export JAVA_VERSION=17
 	export OPENHAB_USERDATA=/var/db/openhab/userdata
 	java -jar "%%LOCALBASE%%/libexec/openhab/runtime/bin/upgradetool.jar"
 
 In case you see issues in the logfile or outdated info in the webinterface,
 you may want to remove the cache and restart:
 	rm -r /var/db/openhab/userdata/cache/org.eclipse.osgi
 EOM
 }
 { type: upgrade
   message: <<EOM
 If you upgrade from a pevious version, make a backup of
 	/var/db/openhab
 and read about the breaking changes in the release notes at
 	https://github.com/openhab/openhab-distro/releases/
 
 You need to change some configs:
 OPENHAB_USERDATA=/var/db/openhab/userdata
 sed -i'.bak' -e "s:,javascript::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:javascript,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:javascript::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:,cometvisu-php::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:cometvisu-php,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:cometvisu-php::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:,innogysmarthome::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:innogysmarthome,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:innogysmarthome::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:,imperihome::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:imperihome,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:imperihome::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:,darksky::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:darksky,::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 sed -i'.bak' -e "s:darksky::g" "$OPENHAB_USERDATA/config/org/openhab/addons.config"
 
 You may have to update the files in
 	/var/db/openhab/userdata/etc/
 from
 	%%DATADIR%%/etc/
 by hand.
 
 At the end you need to run
 	export JAVA_VERSION=17
 	export OPENHAB_USERDATA=/var/db/openhab/userdata
 	java -jar "%%LOCALBASE%%/libexec/openhab/runtime/bin/upgradetool.jar"
 
 In case you see issues in the logfile or outdated info in the webinterface,
 you may want to remove the cache and restart:
         rm -r /var/db/openhab/userdata/cache/org.eclipse.osgi
 EOM
+}
 ]
diff --git a/www/minio/pkg-message b/www/minio/pkg-message
index 4291ae38ded6..93d4f0b931be 100644
--- a/www/minio/pkg-message
+++ b/www/minio/pkg-message
@@ -1,16 +1,17 @@
 [
 { type: upgrade
   maximum_version: 2.0
   message: <<EOM
 Minio console now requires extra configuration via minio_console_address
 EOM
 }
 { type: upgrade
   maximum_version: 2022.10.29.06.21.33
   message: <<EOM
 Migrate from Gateway or Filesystem Mode
 
 See for more details:
 https://min.io/docs/minio/linux/operations/install-deploy-manage/migrate-fs-gateway.html
 EOM
+}
 ]