diff --git a/net/hostapd-devel/Makefile b/net/hostapd-devel/Makefile
index 1b3f35d15d80..f9fc1100525e 100644
--- a/net/hostapd-devel/Makefile
+++ b/net/hostapd-devel/Makefile
@@ -1,46 +1,53 @@
 PORTNAME=	hostapd
 PORTVERSION=	${COMMIT_DATE}
 CATEGORIES=	net
 PKGNAMESUFFIX=	-devel
 
 MAINTAINER=	cy@FreeBSD.org
 COMMENT=	IEEE 802.11 AP, IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
 WWW=		https://w1.fi/hostapd/
 
 USE_GITHUB=	yes
 GH_ACCOUNT=	cschuber
 GH_PROJECT=	hostap
-GH_TAGNAME=	e17107912c
-COMMIT_DATE=	2026.01.09
+GH_TAGNAME=	46e71c4104
+COMMIT_DATE=	2026.01.26
 
 LICENSE=	BSD3CLAUSE
 
 USES=		cpe gmake ssl
 CPE_VENDOR=	w1.fi
 BUILD_WRKSRC=	${WRKSRC}/hostapd
 CFLAGS+=	-Wno-incompatible-function-pointer-types
+CFLAGS+=	-Wno-int-conversion
 CFLAGS+=	-I${OPENSSLINC}
 LDFLAGS+=	-L${OPENSSLLIB}
+MAKE_JOBS_UNSAFE=	yes
 
 PLIST_FILES=	sbin/hostapd sbin/hostapd_cli share/man/man1/hostapd_cli.1.gz \
 		share/man/man8/hostapd.8.gz
 .if !exists(/etc/rc.d/hostapd)
 USE_RC_SUBR=	hostapd
 .endif
 
 post-patch:
 	@${REINPLACE_CMD} -e 's|@$$(E) "  CC " $$<|@$$(E) "  $$(CC) " $$<|' \
 		${BUILD_WRKSRC}/Makefile
-	@${SED} -e 's|@PREFIX@|${PREFIX}|g' ${FILESDIR}/config \
+	@${SED} -e 's|/usr/local|${PREFIX}|g;s|^CONFIG_DRIVER_NL80211|#CONFIG_DRIVER_NL80211|' ${BUILD_WRKSRC}/defconfig \
 		>> ${WRKSRC}/hostapd/.config
+	@${ECHO_CMD} 'CONFIG_L2_FREEBSD=y' >> ${WRKSRC}/hostapd/.config
+	@${ECHO_CMD} 'CONFIG_DNET_PCAP=y' >> ${WRKSRC}/hostapd/.config
+	@${ECHO_CMD} 'CONFIG_IEEE80211BE=y' >> ${WRKSRC}/hostapd/.config
+	@${ECHO_CMD} 'CONFIG_IEEE80211AC=y' >> ${WRKSRC}/hostapd/.config
+	@${ECHO_CMD} 'NEED_AP_MLME=y' >> ${WRKSRC}/hostapd/.config
 
 do-install:
 	${INSTALL_PROGRAM} ${WRKSRC}/hostapd/hostapd ${STAGEDIR}${PREFIX}/sbin
 	${INSTALL_PROGRAM} ${WRKSRC}/hostapd/hostapd_cli \
 		${STAGEDIR}${PREFIX}/sbin
 	${INSTALL_MAN} ${WRKSRC}/hostapd/hostapd_cli.1 \
 		${STAGEDIR}${PREFIX}/share/man/man1
 	${INSTALL_MAN} ${WRKSRC}/hostapd/hostapd.8 \
 		${STAGEDIR}${PREFIX}/share/man/man8
 
 .include <bsd.port.mk>
diff --git a/net/hostapd-devel/distinfo b/net/hostapd-devel/distinfo
index 484cd922b0df..6a9ee8916abc 100644
--- a/net/hostapd-devel/distinfo
+++ b/net/hostapd-devel/distinfo
@@ -1,3 +1,3 @@
-TIMESTAMP = 1768319827
-SHA256 (cschuber-hostap-2026.01.09-e17107912c_GH0.tar.gz) = c6126cfc7dfee7923c06fef580fe433d6397712646276b54f4e9c1426f4ae423
-SIZE (cschuber-hostap-2026.01.09-e17107912c_GH0.tar.gz) = 5388143
+TIMESTAMP = 1769618135
+SHA256 (cschuber-hostap-2026.01.26-46e71c4104_GH0.tar.gz) = 7217a5ee9c5e22cab0c1c5356a05b374fbed3b13bece2dea56b7896dad749cf4
+SIZE (cschuber-hostap-2026.01.26-46e71c4104_GH0.tar.gz) = 5394526
diff --git a/net/hostapd-devel/files/config b/net/hostapd-devel/files/config
deleted file mode 100644
index de05f3384a1a..000000000000
--- a/net/hostapd-devel/files/config
+++ /dev/null
@@ -1,316 +0,0 @@
-# FreeBSD hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-#CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-#CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-#CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for drivers using the nl80211 kernel interface
-#CONFIG_DRIVER_NL80211=y
-
-# driver_nl80211.c requires libnl. If you are compiling it yourself
-# you may need to point hostapd to your version of libnl.
-#
-#CFLAGS += -I$<path to libnl include files>
-#LIBS += -L$<path to libnl library files>
-
-# Use libnl v2.0 (or 3.0) libraries.
-#CONFIG_LIBNL20=y
-
-# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
-#CONFIG_LIBNL32=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-CONFIG_DRIVER_BSD=y
-CFLAGS += -I@PREFIX@/include
-LIBS += -L@PREFIX@/lib
-LIBS_p += -L@PREFIX@/lib
-LIBS_c += -L@PREFIX@/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-#CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-#CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-pwd for the integrated EAP server (secure authentication with a password)
-#CONFIG_EAP_PWD=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
-# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
-# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-# Enable WPS support with NFC config method
-#CONFIG_WPS_NFC=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# EAP-EKE for the integrated EAP server
-#CONFIG_EAP_EKE=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-#CONFIG_IEEE80211N=y
-
-# Wireless Network Management (IEEE Std 802.11v-2011)
-# Note: This is experimental and not complete implementation.
-#CONFIG_WNM=y
-
-# IEEE 802.11ac (Very High Throughput) support
-#CONFIG_IEEE80211AC=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Add support for writing debug log to a file: -f /tmp/hostapd.log
-# Disabled by default.
-#CONFIG_DEBUG_FILE=y
-
-# Add support for sending all debug messages (regardless of debug verbosity)
-# to the Linux kernel tracing facility. This helps debug the entire stack by
-# making it easy to record everything happening from the driver up into the
-# same file, e.g., using trace-cmd.
-#CONFIG_DEBUG_LINUX_TRACING=y
-
-# Remove support for RADIUS accounting
-#CONFIG_NO_ACCOUNTING=y
-
-# Remove support for RADIUS
-#CONFIG_NO_RADIUS=y
-
-# Remove support for VLANs
-#CONFIG_NO_VLAN=y
-
-# Enable support for fully dynamic VLANs. This enables hostapd to
-# automatically create bridge and VLAN interfaces if necessary.
-#CONFIG_FULL_DYNAMIC_VLAN=y
-
-# Use netlink-based kernel API for VLAN operations instead of ioctl()
-# Note: This requires libnl 3.1 or newer.
-#CONFIG_VLAN_NETLINK=y
-
-# Remove support for dumping internal state through control interface commands
-# This can be used to reduce binary size at the cost of disabling a debugging
-# option.
-#CONFIG_NO_DUMP_STATE=y
-
-# Enable tracing code for developer debugging
-# This tracks use of memory allocations and other registrations and reports
-# incorrect use with a backtrace of call (or allocation) location.
-#CONFIG_WPA_TRACE=y
-# For BSD, comment out these.
-#LIBS += -lexecinfo
-#LIBS_p += -lexecinfo
-#LIBS_c += -lexecinfo
-
-# Use libbfd to get more details for developer debugging
-# This enables use of libbfd to get more detailed symbols for the backtraces
-# generated by CONFIG_WPA_TRACE=y.
-#CONFIG_WPA_TRACE_BFD=y
-# For BSD, comment out these.
-#LIBS += -lbfd -liberty -lz
-#LIBS_p += -lbfd -liberty -lz
-#LIBS_c += -lbfd -liberty -lz
-
-# hostapd depends on strong random number generation being available from the
-# operating system. os_get_random() function is used to fetch random data when
-# needed, e.g., for key generation. On Linux and BSD systems, this works by
-# reading /dev/urandom. It should be noted that the OS entropy pool needs to be
-# properly initialized before hostapd is started. This is important especially
-# on embedded devices that do not have a hardware random number generator and
-# may by default start up with minimal entropy available for random number
-# generation.
-#
-# As a safety net, hostapd is by default trying to internally collect
-# additional entropy for generating random data to mix in with the data
-# fetched from the OS. This by itself is not considered to be very strong, but
-# it may help in cases where the system pool is not initialized properly.
-# However, it is very strongly recommended that the system pool is initialized
-# with enough entropy either by using hardware assisted random number
-# generator or by storing state over device reboots.
-#
-# hostapd can be configured to maintain its own entropy store over restarts to
-# enhance random number generation. This is not perfect, but it is much more
-# secure than using the same sequence of random numbers after every reboot.
-# This can be enabled with -e<entropy file> command line option. The specified
-# file needs to be readable and writable by hostapd.
-#
-# If the os_get_random() is known to provide strong random data (e.g., on
-# Linux/BSD, the board in question is known to have reliable source of random
-# data from /dev/urandom), the internal hostapd random pool can be disabled.
-# This will save some in binary size and CPU use. However, this should only be
-# considered for builds that are known to be used on devices that meet the
-# requirements described above.
-#CONFIG_NO_RANDOM_POOL=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-#CONFIG_TLS=openssl
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
-# can be enabled to get a stronger construction of messages when block ciphers
-# are used.
-#CONFIG_TLSV11=y
-
-# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
-# can be enabled to enable use of stronger crypto algorithms.
-#CONFIG_TLSV12=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-#CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Interworking (IEEE 802.11u)
-# This can be used to enable functionality to improve interworking with
-# external networks.
-#CONFIG_INTERWORKING=y
-
-# Hotspot 2.0
-#CONFIG_HS20=y
-
-# Enable SQLite database support in hlr_auc_gw, EAP-SIM DB, and eap_user_file
-#CONFIG_SQLITE=y
-
-# Testing options
-# This can be used to enable some testing options (see also the example
-# configuration file) that are really useful only for testing clients that
-# connect to this hostapd. These options allow, for example, to drop a
-# certain percentage of probe requests or auth/(re)assoc frames.
-#
-#CONFIG_TESTING_OPTIONS=y
-
-# Automatic Channel Selection
-# This will allow hostapd to pick the channel automatically when channel is set
-# to "acs_survey" or "0". Eventually, other ACS algorithms can be added in
-# similar way.
-#
-# Automatic selection is currently only done through initialization, later on
-# we hope to do background checks to keep us moving to more ideal channels as
-# time goes by. ACS is currently only supported through the nl80211 driver and
-# your driver must have survey dump capability that is filled by the driver
-# during scanning.
-#
-# You can customize the ACS survey algorithm with the hostapd.conf variable
-# acs_num_scans.
-#
-# Supported ACS drivers:
-# * ath9k
-# * ath5k
-# * ath10k
-#
-# For more details refer to:
-# http://wireless.kernel.org/en/users/Documentation/acs
-#
-#CONFIG_ACS=y