diff --git a/net/realtek-re-kmod/Makefile b/net/realtek-re-kmod/Makefile
index 5f6a683cafd1..b60f6983973e 100644
--- a/net/realtek-re-kmod/Makefile
+++ b/net/realtek-re-kmod/Makefile
@@ -1,23 +1,23 @@
 PORTNAME=	re
-PORTVERSION=	1101.00
+PORTVERSION=	1102.01
 DISTVERSIONPREFIX=	v
 CATEGORIES=	net
 PKGNAMEPREFIX=	realtek-
 PKGNAMESUFFIX=	-kmod
 
 MAINTAINER=	ale@FreeBSD.org
 COMMENT=	Kernel driver for Realtek PCIe Ethernet Controllers
 WWW=		https://github.com/alexdupre/rtl_bsd_drv
 
 LICENSE=	BSD4CLAUSE
 
 USES=		kmod tar:tgz uidfix
 
 USE_GITHUB=	yes
 GH_ACCOUNT=	alexdupre
 GH_PROJECT=	rtl_bsd_drv
-GH_TAGNAME=	bff7ba4
+GH_TAGNAME=	a17888bb
 
 PLIST_FILES=	${KMODDIR}/if_re.ko
 
 .include <bsd.port.mk>
diff --git a/net/realtek-re-kmod/distinfo b/net/realtek-re-kmod/distinfo
index 87d8b407aaab..5be2a69cacce 100644
--- a/net/realtek-re-kmod/distinfo
+++ b/net/realtek-re-kmod/distinfo
@@ -1,3 +1,3 @@
-TIMESTAMP = 1770115137
-SHA256 (alexdupre-rtl_bsd_drv-v1101.00-bff7ba4_GH0.tar.gz) = 07810d0ea4c162271e33a3d14a836767a7c44a1d960bbfa0123b5ad8d1c19890
-SIZE (alexdupre-rtl_bsd_drv-v1101.00-bff7ba4_GH0.tar.gz) = 214244
+TIMESTAMP = 1781260169
+SHA256 (alexdupre-rtl_bsd_drv-v1102.01-a17888bb_GH0.tar.gz) = e3f52a7b8b7ecfa90272de37f1d82c413b414e5d80f4819a2252c4c706a0ce34
+SIZE (alexdupre-rtl_bsd_drv-v1102.01-a17888bb_GH0.tar.gz) = 227023
diff --git a/net/realtek-re-kmod/pkg-descr b/net/realtek-re-kmod/pkg-descr
index 74a9224069ea..bf8ea0709e63 100644
--- a/net/realtek-re-kmod/pkg-descr
+++ b/net/realtek-re-kmod/pkg-descr
@@ -1,28 +1,30 @@
-Realtek PCIe FE / GBE / 2.5G / 5G Ethernet Family Controller
+Realtek PCIe FE / GBE / 2.5G / 5G / 10G Ethernet Family Controller
 kernel driver.
 
 This is the official driver from Realtek with a few patches to
 improve stability and performance. It can be loaded instead of
 the FreeBSD driver built into the GENERIC kernel if you experience
 issues with it (eg. watchdog timeouts), or your card is not supported.
 
 Supported devices:
 
+* 10G Gigabit Ethernet
+  - RTL8127 / RTL8127AT / RTL8127ATF
+
 * 5G Gigabit Ethernet
   - RTL8126
 
 * 2.5G Gigabit Ethernet
-  - RTL8125 / RTL8125B(G)
+  - RTL8125 / RTL8125B(G) / RTL8125D / RTL8125K
+  - RTL8125BP / RTL8125CP
 
 * 10/100/1000M Gigabit Ethernet
-  - RTL8111B / RTL8111C / RTL8111D / RTL8111E / RTL8111F / RTL8111G
-    RTL8111H / RTL8118(A) / RTL8119i / RTL8111L / RTL8111K
-  - RTL8168B / RTL8168E / RTL8168H
-  - RTL8111DP / RTL8111EP(P) / RTL8111FP
-  - RTL8411 / RTL8411B
+  - RTL8111B / RTL8111C / RTL8111D / RTL8111E / RTL8111F / RTL8111G /
+    RTL8111H(S) / RTL8118A / RTL8119i / RTL8111L / RTL8111K / RTL8116AF
+  - RTL8168B / RTL8168E / RTL8168G / RTL8168H
+  - RTL8111DP / RTL8111EP(P)(V) / RTL8111FP
 
 * 10/100M Fast Ethernet
   - RTL8101E / RTL8102E / RTL8103E / RTL8105E / RTL8106E / RTL8107E
-  - RTL8401 / RTL8402
 
-See also: https://www.realtek.com/en/component/zoo/category/network-interface-controllers-10-100-1000m-gigabit-ethernet-pci-express-software
+See also: https://www.realtek.com/Download/List?cate_id=584
diff --git a/net/realtek-re-kmod/pkg-message b/net/realtek-re-kmod/pkg-message
index 07b478dccc53..e91179d1feb3 100644
--- a/net/realtek-re-kmod/pkg-message
+++ b/net/realtek-re-kmod/pkg-message
@@ -1,35 +1,53 @@
 [
 { type: install
   message: <<EOM
 Add the following lines to your /boot/loader.conf
 to override the built-in FreeBSD re(4) driver.
 
 if_re_load="YES"
 if_re_name="/boot/modules/if_re.ko"
 
 By default, the size of allocated mbufs is enough
 to receive the largest Ethernet frame supported
 by the card.  If your memory is highly fragmented,
 trying to allocate contiguous pages (more than
 4096 bytes) may result in driver hangs.
 For this reason the value is tunable at boot time,
 e.g. if you don't need Jumbo frames you can lower
 the memory requirements and avoid this issue with:
 
 hw.re.max_rx_mbuf_sz="2048"
 
 To enable Wake on LAN (WoL) support you might need
 to set the following tunables:
 
 hw.re.s5wol="1"
 hw.re.s0_magic_packet="1"
 
-If you experience network hangs with IPv6 enabled,
-you might need to disable the checksum offloading
-by adding the following parameters to the related
-ifconfig line in your /etc/rc.conf file:
+By default the driver negotiates 802.3x flow
+control with the link partner.  If a congested
+peer throttles your transmit path with pause
+frames (e.g. a 2.5GbE card behind a 1GbE switch),
+you can disable flow control with:
+
+hw.re.flow_control="0"
+
+The driver programs the PCIe Max Read Request
+Size for better transmit performance.  On Realtek
+SoC platforms this can be disabled with:
+
+hw.re.config_soc_lan="1"
+
+Driver versions before 1102.01 could hang the
+RTL8125 transmitter when sending small UDP
+packets (e.g. IPv6 DNS queries).  This is fixed,
+but if you still experience network hangs with
+IPv6 enabled, you can disable the checksum
+offloading by adding the following parameters to
+the related ifconfig line in your /etc/rc.conf
+file, and please report the issue:
 
 -rxcsum -txcsum -rxcsum6 -txcsum6
 EOM
 }
 ]