diff --git a/Mk/Uses/go.mk b/Mk/Uses/go.mk
index 1929dbc1dc9f..d7e932daee73 100644
--- a/Mk/Uses/go.mk
+++ b/Mk/Uses/go.mk
@@ -1,322 +1,322 @@
 # This file contains logic to ease porting of Go binaries using the
 # `go` command.
 #
 # Feature:	go
 # Usage:	USES=go
 # Valid ARGS:	(none), N.NN, N.NN-devel, modules, no_targets, run
 #
 # (none)	Setup GOPATH and build in GOPATH mode using default Go version.
 # N.NN[-devel]	Specify Go version
 # modules	If the upstream uses Go modules, this can be set to build
 #		in modules-aware mode.
 # no_targets	Indicates that Go is needed at build time as a part of
 #		make/CMake build.  This will setup build environment like
 #		GO_ENV, GO_BUILDFLAGS but will not create post-extract and
 #		do-{build,install,test} targets.
 # run		Indicates that Go is needed at run time and adds it to
 #		RUN_DEPENDS.
 #
 # You can set the following variables to control the process.
 #
 # GO_MODULE
 #	The name of the module as specified by "module" directive in go.mod.
 #	In most cases, this is the only required variable for ports that
 #	use Go modules.
 #
 # GO_MOD_DIST
 #       The location to download the go.mod file if GO_MODULE is used.
 #       The default is empty, so it is loaded from GO_PROXY.
 #       Set it to "gitlab" and make sure GL_PROJECT is defined to download
 #       the "go.mod" from gitlab.
 #       Set it to "github" and make sure GH_PROJECT is defined to download
 #       the "go.mod" from github.
 #       You can also set it completely manually a URI without go.mod in it,
 #       is attached automatically to the URI.
 #
 # GO_PKGNAME
 #	The name of the package when building in GOPATH mode.  This
 #	is the directory that will be created in ${GOPATH}/src.  If not set
 #	explicitly and GH_SUBDIR or GL_SUBDIR is present, GO_PKGNAME will
 #	be inferred from it.
 #	It is not needed when building in modules-aware mode.
 #
 # GO_TARGET
 #	The packages to build.  The default value is ${GO_PKGNAME}.
 #	GO_TARGET can also be a tuple in the form package:path where path can be
 #	either a simple filename or a full path starting with ${PREFIX}.
 #
 # GO_TESTTARGET
 #	The packages to test. The default value is `./...` (the current package
 #	and all subpackages).
 #
 # CGO_CFLAGS
 #	Additional CFLAGS variables to be passed to the C compiler by the `go`
 #	command
 #
 # CGO_LDFLAGS
 #	Additional LDFLAGS variables to be passed to the C compiler by the `go`
 #	command
 #
 # GO_BUILDFLAGS
 #	Additional build arguments to be passed to the `go build` command
 #
 # GO_TESTFLAGS
 #	Additional build arguments to be passed to the `go test` command
 #
 # MAINTAINER: go@FreeBSD.org
 
 .if !defined(_INCLUDE_USES_GO_MK)
 _INCLUDE_USES_GO_MK=	yes
 
 # When adding a version, please keep the comment in
 # Mk/bsd.default-versions.mk in sync.
-GO_VALID_VERSIONS=	1.20 1.21 1.22 1.23-devel
+GO_VALID_VERSIONS=	1.20 1.21 1.22 1.23 1.24-devel
 
 # Check arguments sanity
 .  if !empty(go_ARGS:N[1-9].[0-9][0-9]:N*-devel:Nmodules:Nno_targets:Nrun)
 IGNORE=	USES=go has invalid arguments: ${go_ARGS:N[1-9].[0-9][0-9]:N*-devel:Nmodules:Nno_targets:Nrun}
 .  endif
 
 # Parse Go version
 GO_VERSION=	${go_ARGS:Nmodules:Nno_targets:Nrun:C/^$/${GO_DEFAULT}/}
 .  if empty(GO_VALID_VERSIONS:M${GO_VERSION})
 IGNORE?= USES=go has invalid version number: ${GO_VERSION}
 .  endif
 GO_SUFFIX=	${GO_VERSION:S/.//:C/.*-devel/-devel/}
 GO_PORT=	lang/go${GO_SUFFIX}
 
 # Settable variables
 
 .  if empty(GO_PKGNAME)
 .    if !empty(GH_SUBDIR)
 GO_PKGNAME=	${GH_SUBDIR:S|^src/||}
 .    elif !empty(GL_SUBDIR)
 GO_PKGNAME=	${GL_SUBDIR:S|^src/||}
 .    else
 GO_PKGNAME=	${PORTNAME}
 .    endif
 .  endif
 
 GO_TARGET?=	${GO_PKGNAME}
 GO_TESTTARGET?=	./...
 
 .  if !defined(PIE_UNSAFE) && defined(WITH_PIE) && ${ARCH} == amd64
 GO_BUILDFLAGS+= -buildmode=pie
 .  else
 GO_BUILDFLAGS+= -buildmode=exe
 .  endif
 GO_BUILDFLAGS+= -v -trimpath
 .  if !defined(WITH_DEBUG) && empty(GO_BUILDFLAGS:M-ldflags*)
 GO_BUILDFLAGS+=	-ldflags=-s
 .  endif
 GO_BUILDFLAGS+=	-buildvcs=false
 GO_TESTFLAGS+=	-v -buildvcs=false
 
 CGO_ENABLED?=	1
 CGO_CFLAGS+=	-I${LOCALBASE}/include
 CGO_LDFLAGS+=	-L${LOCALBASE}/lib
 
 .  if ${ARCH} == armv6 || ${ARCH} == armv7
 GOARM?=		${ARCH:C/armv//}
 .  endif
 
 GO_GOPROXY?=	https://proxy.golang.org
 GO_GOSUMDB?=	sum.golang.org
 
 # Read-only variables
 
 GO_CMD=		${LOCALBASE}/bin/go${GO_SUFFIX}
 GO_WRKDIR_BIN=	${WRKDIR}/bin
 GO_ENV+=	CGO_ENABLED=${CGO_ENABLED} \
 		CGO_CFLAGS="${CGO_CFLAGS}" \
 		CGO_LDFLAGS="${CGO_LDFLAGS}" \
 		GOAMD64=${GOAMD64} \
 		GOARM=${GOARM} \
 		GOTMPDIR="${WRKDIR}"
 
 .  if ${go_ARGS:Mmodules}
 GO_BUILDFLAGS+=	-mod=vendor
 GO_TESTFLAGS+=	-mod=vendor
 GO_GOPATH=	${DISTDIR}/go/${PKGORIGIN:S,/,_,g}
 GO_MODCACHE=	file://${GO_GOPATH}/pkg/mod/cache/download
 GO_WRKSRC=	${WRKSRC}
 GO_ENV+=	GOPATH="${GO_GOPATH}" \
 		GOBIN="${GO_WRKDIR_BIN}" \
 		GO111MODULE=on \
 		GOFLAGS=-modcacherw \
 		GOSUMDB=${GO_GOSUMDB}
 .    if defined(GO_MODULE)
 GO_MODNAME=	${GO_MODULE:C/^([^@]*)(@([^@]*)?)/\1/}
 .      if empty(DISTFILES:Mgo.mod\:*) && empty(DISTFILES:Mgo.mod)
 # Unless already setup for download by other means,
 # arrange to pull go.mod and distribution archive from GOPROXY.
 GO_MODVERSION=	${GO_MODULE:C/^([^@]*)(@([^@]*)?)/\2/:M@*:S/^@//:S/^$/${DISTVERSIONFULL}/}
 GO_MODFILE=	${GO_MODVERSION}.mod
 GO_DISTFILE=	${GO_MODVERSION}.zip
 # If GO_MOD_DIST is gitlab, download the go.mod from gitlab by the defined GL_ACCOUNT and GL_PROJECT/PORTNAME
 .        if defined(GO_MOD_DIST) && "${GO_MOD_DIST}" == "gitlab"
 MASTER_SITES+=	https://gitlab.com/${GL_ACCOUNT}/${GL_PROJECT}/-/raw/${GO_MODVERSION}/${WRKSRC_SUBDIR:?${WRKSRC_SUBDIR}/:}
 DISTFILES+=	go.mod
 # If GO_MOD_DIST is github, download the go.mod from github by the defined GH_ACCOUNT and GH_PROJECT/PORTNAME
 .        elif defined(GO_MOD_DIST) && "${GO_MOD_DIST}" == "github"
 MASTER_SITES+=	https://raw.githubusercontent.com/${GH_ACCOUNT}/${GH_PROJECT}/${GO_MODVERSION}/${WRKSRC_SUBDIR:?${WRKSRC_SUBDIR}/:}
 DISTFILES+=	go.mod
 # Manually defined GO_MOD_DIST
 .        elifdef(GO_MOD_DIST)
 MASTER_SITES+=	${GO_MOD_DIST}
 DISTFILES+=	go.mod
 # Fallback to default GO_PROXY
 .        else
 MASTER_SITES+=	${GO_GOPROXY}/${GO_MODNAME:C/([A-Z])/!\1/g:tl}/@v/
 DISTFILES+=	${GO_MODFILE} ${GO_DISTFILE}
 WRKSRC=		${WRKDIR}/${GO_MODNAME}@${GO_MODVERSION}
 .        endif
 
 .      endif
 EXTRACT_ONLY?=	${DISTFILES:N*.mod\:*:N*.mod:C/:.*//}
 DIST_SUBDIR=	go/${PKGORIGIN:S,/,_,g}/${DISTNAME}
 FETCH_DEPENDS+=	${GO_CMD}:${GO_PORT} \
 		ca_root_nss>0:security/ca_root_nss
 USES+=		zip
 .    else
 GO_ENV+=	GO_NO_VENDOR_CHECKS=1
 .    endif
 .  else
 GO_GOPATH=	${WRKDIR}
 GO_WRKSRC=	${WRKDIR}/src/${GO_PKGNAME}
 GO_ENV+=	GOPATH="${GO_GOPATH}" \
 		GOBIN="" \
 		GO111MODULE=off
 .  endif
 
 BUILD_DEPENDS+=	${GO_CMD}:${GO_PORT}
 BINARY_ALIAS+=	go=go${GO_SUFFIX} gofmt=gofmt${GO_SUFFIX}
 .  if ${go_ARGS:Mrun}
 RUN_DEPENDS+=	${GO_CMD}:${GO_PORT}
 .  endif
 
 _USES_POST+=	go
 .endif # !defined(_INCLUDE_USES_GO_MK)
 
 .if defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_GO_POST_MK)
 _INCLUDE_USES_GO_POST_MK=	yes
 
 .  if ${go_ARGS:Mmodules} && defined(GO_MODULE)
 _USES_fetch+=	200:go-pre-fetch 800:go-post-fetch
 # Check that pkg can be installed or is already available,
 # otherwise it will be impossible to install go and fetch dependencies.
 go-pre-fetch:
 .    if defined(CLEAN_FETCH_ENV) && !exists(${PKG_BIN})
 	@${ECHO_MSG} "===> CLEAN_FETCH_ENV is defined, cannot download Go modules (pkg and go are required)"; \
 	exit 1
 .    endif
 # Download all required build dependencies to GOMODCACHE.
 go-post-fetch:
 	@${ECHO_MSG} "===> Fetching ${GO_MODNAME} dependencies";
 	@(cd ${DISTDIR}/${DIST_SUBDIR}; \
 		[ -e go.mod ] || ${RLN} ${GO_MODFILE} go.mod; \
 		${SETENVI} ${WRK_ENV} \
 		${HTTP_PROXY:DHTTP_PROXY=${HTTP_PROXY:Q}} \
 		${http_proxy:Dhttp_proxy=${http_proxy:Q}} \
 		${HTTPS_PROXY:DHTTPS_PROXY=${HTTPS_PROXY:Q}} \
 		${https_proxy:Dhttps_proxy=${https_proxy:Q}} \
 		${NO_PROXY:DNO_PROXY=${NO_PROXY:Q}} \
 		${no_proxy:Dno_proxy=${no_proxy:Q}} \
 		${GO_ENV} GOPROXY=${GO_GOPROXY} ${GO_CMD} mod download -x all)
 .  endif
 
 _USES_extract+=	800:go-post-extract
 .  if ${go_ARGS:Mmodules} && defined(GO_MODULE)
 # Module-aware build mode. Although not strictly necessary (all build dependencies should be
 # already in MODCACHE), vendor them so we can patch them if needed.
 go-post-extract:
 	@${ECHO_MSG} "===> Tidying ${GO_MODNAME} dependencies";
 	@(cd ${GO_WRKSRC}; ${SETENVI} ${WRK_ENV} ${MAKE_ENV} ${GO_ENV} GOPROXY=${GO_MODCACHE} ${GO_CMD} mod tidy -e)
 	@${ECHO_MSG} "===> Vendoring ${GO_MODNAME} dependencies";
 	@(cd ${GO_WRKSRC}; ${SETENVI} ${WRK_ENV} ${MAKE_ENV} ${GO_ENV} GOPROXY=${GO_MODCACHE} ${GO_CMD} mod vendor -e)
 .  else
 # Legacy (GOPATH) build mode, setup directory structure expected by Go for the main module.
 go-post-extract:
 	@${MKDIR} ${GO_WRKSRC:H}
 	@${LN} -sf ${WRKSRC} ${GO_WRKSRC}
 .  endif
 
 .  if !target(do-build) && empty(go_ARGS:Mno_targets)
 do-build:
 	(cd ${GO_WRKSRC}; \
 	for t in ${GO_TARGET}; do \
 		out=$$(${BASENAME} $$(${ECHO_CMD} $${t} | \
 			${SED} -Ee 's/^[^:]*:([^:]+).*$$/\1/' -e 's/^\.$$/${PORTNAME}/')); \
 		pkg=$$(${ECHO_CMD} $${t} | \
 			${SED} -Ee 's/^([^:]*).*$$/\1/' -e 's/^${PORTNAME}$$/./'); \
 		${ECHO_MSG} "===>  Building $${out} from $${pkg}"; \
 		${SETENVI} ${WRK_ENV} ${MAKE_ENV} ${GO_ENV} GOMAXPROCS=${MAKE_JOBS_NUMBER} GOPROXY=off ${GO_CMD} build ${GO_BUILDFLAGS} \
 			-o ${GO_WRKDIR_BIN}/$${out} \
 			$${pkg}; \
 	done)
 .  endif
 
 .  if !target(do-install) && empty(go_ARGS:Mno_targets)
 do-install:
 	for t in ${GO_TARGET}; do \
 		dst=$$(${ECHO_CMD} $${t} | \
 			${SED} -Ee 's/^[^:]*:([^:]+).*$$/\1/' -e 's/^\.$$/${PORTNAME}/'); \
 		src=$$(${BASENAME} $${dst}); \
 		case $${dst} in \
 			/*) dst=${STAGEDIR}$${dst}; ${MKDIR} $$(${DIRNAME} $${dst}) ;; \
 			 *) dst=${STAGEDIR}${PREFIX}/bin/$${src} ;; \
 		esac; \
 		${ECHO_MSG} "===>  Installing $${src} as $${dst}"; \
 		${INSTALL_PROGRAM} ${GO_WRKDIR_BIN}/$${src} $${dst}; \
 	done
 .  endif
 
 .  if !target(do-test) && empty(go_ARGS:Mno_targets)
 do-test:
 	(cd ${GO_WRKSRC}; \
 	for t in ${GO_TESTTARGET}; do \
 		${ECHO_MSG} "===>  Testing $${t}"; \
 		${SETENVI} ${WRK_ENV} ${MAKE_ENV} ${GO_ENV} GOPROXY=off ${GO_CMD} test ${GO_TESTFLAGS} $${t}; \
 	done)
 .  endif
 
 .  if ${go_ARGS:Mmodules} && defined(GO_MODULE)
 gomod-clean:
 .    if exists(${GO_CMD})
 	@${ECHO_MSG} "===>  Cleaning Go module cache"
 	@${SETENVI} ${WRK_ENV} ${GO_ENV} ${GO_CMD} clean -modcache
 .    else
 	@${ECHO_MSG} "===>    Skipping since ${GO_CMD} is not installed"
 .    endif
 
 # Hook up to distclean
 .    if !target(post-clean) && !make(clean)
 post-clean: gomod-clean
 	@${RM} -r ${GO_GOPATH}
 .    endif
 .  endif
 
 # Helper targets for port maintainers
 
 .  if ${go_ARGS:Mmodules} && !defined(GO_MODULE)
 _MODULES2TUPLE_CMD=	modules2tuple
 gomod-vendor-deps:
 	@if ! type ${GO_CMD} > /dev/null 2>&1; then \
 		${ECHO_MSG} "===> Please install \"${GO_PORT}\""; exit 1; \
 	fi; \
 	if ! type ${_MODULES2TUPLE_CMD} > /dev/null 2>&1; then \
 		${ECHO_MSG} "===> Please install \"ports-mgmt/modules2tuple\""; exit 1; \
 	fi
 
 gomod-vendor: gomod-vendor-deps patch
 	@cd ${WRKSRC}; ${SETENVI} ${WRK_ENV} ${GO_ENV} ${GO_CMD} mod vendor; \
 	[ -r vendor/modules.txt ] && ${_MODULES2TUPLE_CMD} vendor/modules.txt
 
 gomod-vendor-diff: gomod-vendor-deps patch
 	@cd ${WRKSRC}; ${SETENVI} ${WRK_ENV} ${GO_ENV} ${GO_CMD} mod vendor; \
 	[ -r vendor/modules.txt ] && ${_MODULES2TUPLE_CMD} vendor/modules.txt | ${SED} 's|GH_TUPLE=|	|; s| \\$$||' | ${GREP} -v '		\\' > ${WRKDIR}/GH_TUPLE-new.txt && \
 	echo ${GH_TUPLE} | ${TR} -s " " "\n" | ${SED} "s|^|		|" > ${WRKDIR}/GH_TUPLE-old.txt && \
 	${DIFF} ${WRKDIR}/GH_TUPLE-old.txt ${WRKDIR}/GH_TUPLE-new.txt || exit 0
 .  endif
 
 .endif # defined(_POSTMKINCLUDED) && !defined(_INCLUDE_USES_GO_POST_MK)
diff --git a/Mk/bsd.default-versions.mk b/Mk/bsd.default-versions.mk
index 0cd48331206b..23f2e5ca6247 100644
--- a/Mk/bsd.default-versions.mk
+++ b/Mk/bsd.default-versions.mk
@@ -1,192 +1,192 @@
 # MAINTAINER:	ports@FreeBSD.org
 #
 # Note: before committing to this file, contact portmgr to arrange for an
 # experimental ports run.  Untested commits may be backed out at portmgr's
 # discretion.
 #
 # Provide default versions for ports with multiple versions selectable
 # by the user.
 #
 # Users who want to override these defaults can easily do so by defining
 # DEFAULT_VERSIONS in their make.conf as follows:
 #
 #   DEFAULT_VERSIONS=	perl5=5.20 ruby=3.1
 
 .if !defined(_INCLUDE_BSD_DEFAULT_VERSIONS_MK)
 _INCLUDE_BSD_DEFAULT_VERSIONS_MK=	yes
 
 LOCALBASE?=	/usr/local
 
 .  for lang in APACHE BDB COROSYNC EBUR128 EMACS FIREBIRD FORTRAN FPC GCC \
 	GHOSTSCRIPT GL GO GUILE IMAGEMAGICK JAVA LAZARUS LIBRSVG2 LINUX LLVM \
 	LUA LUAJIT MONO MYSQL NINJA NODEJS OPENLDAP PERL5 PGSQL PHP \
 	PYCRYPTOGRAPHY PYTHON PYTHON2 RUBY RUST SAMBA SSL TCLTK VARNISH
 .    if defined(${lang}_DEFAULT)
 ERROR+=	"The variable ${lang}_DEFAULT is set and it should only be defined through DEFAULT_VERSIONS+=${lang:tl}=${${lang}_DEFAULT} in /etc/make.conf"
 .    endif
 #.undef ${lang}_DEFAULT
 .  endfor
 
 .  for lang in ${DEFAULT_VERSIONS}
 _l=		${lang:C/=.*//g}
 ${_l:tu}_DEFAULT=	${lang:C/.*=//g}
 .  endfor
 
 # Possible values: 2.4
 APACHE_DEFAULT?=	2.4
 # Possible values: 5, 18
 BDB_DEFAULT?=		5
 # Possible values: 2, 3
 COROSYNC_DEFAULT?=	3
 # Possible values: rust, legacy
 .  if empty(ARCH:Naarch64:Namd64:Narmv7:Ni386:Npowerpc64:Npowerpc64le:Npowerpc:Nriscv64)
 EBUR128_DEFAULT?=	rust
 .  else
 EBUR128_DEFAULT?=	legacy
 .  endif
 # Possible_values: full canna nox devel_full devel_nox
 #EMACS_DEFAULT?=	let the flavor be the default if not explicitly set
 # Possible values: 3.0, 4.0
 FIREBIRD_DEFAULT?=	3.0
 # Possible values: gfortran
 FORTRAN_DEFAULT?=	gfortran
 # Possible values: 3.2.3, 3.3.1
 .  if !defined(WANT_FPC_DEVEL)
 FPC_DEFAULT?=		3.2.3
 .  else
 FPC_DEFAULT?=		3.3.1
 .  endif
 # Possible values: 10, 11, 12, 13, 14, 15
 # (Any other version is completely unsupported and not meant for general use.)
 GCC_DEFAULT?=		13
 # Possible values: 10
 GHOSTSCRIPT_DEFAULT?=	10
 # Possible values: mesa-libs, mesa-devel
 GL_DEFAULT?=		mesa-libs
-# Possible values: 1.20, 1.21, 1.22, 1.23-devel
+# Possible values: 1.20, 1.21, 1.22, 1.23, 1.24-devel
 GO_DEFAULT?=		1.21
 # Possible values: 1.8, 2.2, 3.0
 GUILE_DEFAULT?=		2.2
 # Possible versions: 6, 7
 # Possible flavors:  x11, nox11
 #                    (defaults to x11 when not specified)
 # Format:	     version[-flavor]
 # Examples:	     6-nox11, 7
 IMAGEMAGICK_DEFAULT?=	7
 # Possible values: 8, 11, 17, 18, 19, 20, 21
 JAVA_DEFAULT?=		8
 # Possible values: 3.4.0, 3.99
 .  if !defined(WANT_LAZARUS_DEVEL)
 LAZARUS_DEFAULT?=	3.4.0
 .  else
 LAZARUS_DEFAULT?=	3.99
 .  endif
 # Possible values: rust, legacy
 .  if empty(ARCH:Naarch64:Namd64:Narmv7:Ni386:Npowerpc64:Npowerpc64le:Npowerpc:Nriscv64)
 LIBRSVG2_DEFAULT?=	rust
 .  else
 LIBRSVG2_DEFAULT?=	legacy
 .  endif
 # Possible values: c7 rl9
 LINUX_DEFAULT?=		c7
 # Possible values: 11, 12, 13, 14, 15, 16, 17, -devel (to be used when non-base compiler is required)
 LLVM_DEFAULT?=		15
 # Possible values: 5.1, 5.2, 5.3, 5.4
 LUA_DEFAULT?=		5.4
 # Possible values: luajit, luajit-devel, luajit-openresty
 .  if ${ARCH:Mpowerpc64*}
 LUAJIT_DEFAULT?=	luajit-openresty
 .  else
 LUAJIT_DEFAULT?=	luajit-devel
 .  endif
 # Possible values: 5.10, 5.20, 6.8
 MONO_DEFAULT?=		5.20
 # Possible values: 8.0, 8.4, 9.0, 10.5m, 10.6m, 10.11m, 11.4m
 MYSQL_DEFAULT?=		8.0
 # Possible values: ninja, samurai
 NINJA_DEFAULT?=		ninja
 # Possible value: 18, 20, 22, current, lts (Note: current = 22 and lts = 20)
 NODEJS_DEFAULT?=	lts
 # Possible value: 25, 26
 OPENLDAP_DEFAULT?=	26
 # Possible values: 5.36, 5.38, 5.40, devel
 .  if !exists(${LOCALBASE}/bin/perl) || (!defined(_PORTS_ENV_CHECK) && \
     defined(PACKAGE_BUILDING))
 # When changing the default here, make sure the DEPRECATED/EXPIRATION lines in
 # the older Perl 5 ports are uncommented at the same time.
 PERL5_DEFAULT?=		5.36
 .  elif !defined(PERL5_DEFAULT)
 # There's no need to replace development versions, like "5.23" with "devel"
 # because 1) nobody is supposed to use it outside of poudriere, and 2) it must
 # be set manually in /etc/make.conf in the first place, and we're never getting
 # in here.
 .    if !defined(_PERL5_FROM_BIN)
 _PERL5_FROM_BIN!=	${LOCALBASE}/bin/perl -e 'printf "%vd\n", $$^V;'
 .    endif
 _EXPORTED_VARS+=	_PERL5_FROM_BIN
 PERL5_DEFAULT:=		${_PERL5_FROM_BIN:R}
 .  endif
 # Possible values: 12, 13, 14, 15, 16
 PGSQL_DEFAULT?=		16
 # Possible values: 8.1, 8.2, 8.3, 8.4
 PHP_DEFAULT?=		8.2
 # Possible values: rust, legacy
 .  if empty(ARCH:Naarch64:Namd64:Narmv7:Ni386:Npowerpc64:Npowerpc64le:Npowerpc:Nriscv64)
 PYCRYPTOGRAPHY_DEFAULT?=	rust
 .  else
 PYCRYPTOGRAPHY_DEFAULT?=	legacy
 .  endif
 # Possible values: 3.8, 3.9, 3.10, 3.11
 PYTHON_DEFAULT?=	3.11
 # Possible values: 2.7
 PYTHON2_DEFAULT?=	2.7
 # Possible values: 3.1, 3.2, 3.3
 RUBY_DEFAULT?=		3.2
 # Possible values: rust, rust-nightly
 RUST_DEFAULT?=		rust
 # Possible values: 4.16, 4.19
 SAMBA_DEFAULT?=		4.16
 # When updating this, please also update the same list in ssl.mk and the checks
 # for USES=ssl in qa.sh!
 # Possible values: base, openssl, openssl111, openssl31, openssl32, openssl33, libressl, libressl-devel
 .  if !defined(SSL_DEFAULT)
 #	If no preference was set, check for an installed base version
 #	but give an installed port preference over it.
 .    if	!defined(SSL_DEFAULT) && \
 	!exists(${DESTDIR}/${LOCALBASE}/lib/libcrypto.so) && \
 	exists(${DESTDIR}/usr/include/openssl/opensslv.h)
 SSL_DEFAULT=	base
 .    else
 .      if exists(${DESTDIR}/${LOCALBASE}/lib/libcrypto.so)
 .        if defined(PKG_BIN)
 # find installed port and use it for dependency
 .          if !defined(OPENSSL_INSTALLED)
 .            if defined(DESTDIR)
 PKGARGS=	-c ${DESTDIR}
 .            else
 PKGARGS=
 .            endif
 OPENSSL_INSTALLED!=	${PKG_BIN} ${PKGARGS} which -qo ${LOCALBASE}/lib/libcrypto.so || :
 .          endif
 .          if defined(OPENSSL_INSTALLED) && !empty(OPENSSL_INSTALLED)
 SSL_DEFAULT:=		${OPENSSL_INSTALLED:T}
 WARNING+=	"You have ${OPENSSL_INSTALLED} installed but do not have DEFAULT_VERSIONS+=ssl=${SSL_DEFAULT} set in your make.conf"
 .          endif
 .        else
 check-makevars::
 	@${ECHO_MSG} "You have a ${LOCALBASE}/lib/libcrypto.so file installed, but the framework is unable"
 	@${ECHO_MSG} "to determine what port it comes from."
 	@${ECHO_MSG} "Add DEFAULT_VERSIONS+=ssl=<openssl package name> to your /etc/make.conf and try again."
 	@${FALSE}
 .        endif
 .      endif
 .    endif
 # Make sure we have a default in the end
 SSL_DEFAULT?=	base
 .  endif
 # Possible values: 8.5, 8.6, 8.7
 TCLTK_DEFAULT?=		8.6
 # Possible values: 6, 7
 VARNISH_DEFAULT?=	6
 
 .endif