diff --git a/en/platforms/arm.sgml b/en/platforms/arm.sgml index d3312a8467..9bbf0e9018 100644 --- a/en/platforms/arm.sgml +++ b/en/platforms/arm.sgml @@ -1,55 +1,55 @@ - + %includes; ]> &header;

FreeBSD/ARM is a port of FreeBSD which aims to run on the ARM architecture and hardware. The project's goal is to provide support for the architecture and hardware surrounding it.

FreeBSD/ARM Hardware Notes

-

Currently FreeBSD should work on the i80321 based intel +

Currently FreeBSD should work on the i80321 based Intel devboards, which includes the IQ31244 and IQ80321 boards. Support is still minimal, covering only the CPU, PCI-X bus, - em(4) ethernet adapters, the UART and timer devices.

+ em(4) Ethernet adapters, the UART and timer devices.

Minimal support for the StrongARM 1100 CPU is provided, but only within the limits of what Simics emulate: CPU, UART and - clock. It is theorically possible to boot on the Assabet board, - the one simics emulates; no attempts, successful or unsuccessful + clock. It is theoretically possible to boot on the Assabet board, + the one Simics emulates; no attempts, successful or unsuccessful, have been reported.

What Needs To Be Done

FreeBSD/ARM Related Links

Mini-Install guide

Oliver (cognet@FreeBSD.org) has written a mini-install guide for the current FreeBSD source. It is available here

&footer; diff --git a/en/platforms/index.sgml b/en/platforms/index.sgml index 1fff8a0f3f..646c24f2d5 100644 --- a/en/platforms/index.sgml +++ b/en/platforms/index.sgml @@ -1,63 +1,64 @@ - + %includes;]> &header;

Introduction

Here you will find a list of platforms that FreeBSD currently supports along with platforms currently being ported to (with the exception of x86, since most of the information on the remainder of the site already pertains to that platform).

Table of Contents

Comments and Feedback

If you have comments about a port, or wish to provide feedback to the developers, send it the relevant mailing list. The lists are:

&footer;