diff --git a/en_US.ISO8859-1/books/handbook/basics/chapter.sgml b/en_US.ISO8859-1/books/handbook/basics/chapter.sgml index 2b59a21a96..46e51d318a 100644 --- a/en_US.ISO8859-1/books/handbook/basics/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/basics/chapter.sgml @@ -1,1965 +1,1977 @@ Chris Shumway Rewritten by UNIX Basics Synopsis basics The following chapter will cover the basic commands and functionality of the FreeBSD operating system. Much of this material is relevant for any &unix; like operating system. Feel free to skim over this chapter if you are familiar with the material. If you are new to FreeBSD, then you will definitely want to read through this chapter carefully. After reading this chapter, you will know: How &unix; file permissions work. + + The default &os; file system layout. + + + How to mount and unmount file systems. + What processes, daemons, and signals are. What a shell is, and how to change your default login environment. How to use basic text editors. + + What devices and device nodes are. + + + What binary format is used under &os;. + How to read manual pages for more information. How to use the virtual consoles of FreeBSD. Permissions UNIX FreeBSD, being a direct descendant of BSD &unix;, is based on several key &unix; concepts. The first, and most pronounced, is that FreeBSD is a multi-user operating system. The system can handle several users all working simultaneously on completely unrelated tasks. The system is responsible for properly sharing and managing requests for hardware devices, peripherals, memory, and CPU time evenly to each user. Because the system is capable of supporting multiple users, everything the system manages has a set of permissions governing who can read, write, and execute the resource. These permissions are stored as two octets broken into three pieces, one for the owner of the file, one for the group that the file belongs to, and one for everyone else. This numerical representation works like this: permissions file permissions Value Permission Directory Listing 0 No read, no write, no execute --- 1 No read, no write, execute --x 2 No read, write, no execute -w- 3 No read, write, execute -wx 4 Read, no write, no execute r-- 5 Read, no write, execute r-x 6 Read, write, no execute rw- 7 Read, write, execute rwx ls directories You can use the command line argument to &man.ls.1; to view a long directory listing that includes a column with information about a file's permissions for the owner, group, and everyone else. Here is how the first column of ls -l is broken up: -rw-r--r-- The first (leftmost) character tells if this file is a regular file, a directory, a special character device, a socket, or any other special pseudo-file device. In this case, the - indicates a regular file. The next three characters, rw- in this example, give the permissions for the owner of the file. The next three characters, r--, give the permissions for the group that the file belongs to. The final three characters, r--, give the permissions for the rest of the world. A dash means that the permission is turned off. In the case of this file, the permissions are set so the owner can read and write to the file, the group can read the file, and the rest of the world can only read the file. According to the table above, the permissions for this file would be 644, where each digit represents the three parts of the file's permission. This is all well and good, but how does the system control permissions on devices? FreeBSD actually treats most hardware devices as a file that programs can open, read, and write data to just like any other file. These special device files are stored on the /dev directory. Directories are also treated as files. They have read, write, and execute permissions. The executable bit for a directory has a slightly different meaning than that of files. When a directory is marked executable, it means it can be moved into, i.e. it is possible to cd into it. This also means that within the directory it is possible to access files whose names are known (subject, of course, to the permissions on the files themselves). In particular, in order to perform a directory listing, read permission must be set on the directory, whilst to delete a file that one knows the name of, it is necessary to have write and execute permissions to the directory containing the file. There are more permission bits, but they are primarily used in special circumstances such as setuid binaries and sticky directories. If you want more information on file permissions and how to set them, be sure to look at the &man.chmod.1; manual page. Tom Rhodes Contributed by Symbolic Permissions Permissionssymbolic Symbolic permissions, sometimes referred to as symbolic expressions, use characters in place of octal values to assign permissions to files or directories. Symbolic expressions use the syntax of (who) (action) (permissions), where the following values are available: Option Letter Represents (who) u User (who) g Group owner (who) o Other (who) a All (world) (action) + Adding permissions (action) - Removing permissions (action) = Explicitly set permissions (permissions) r Read (permissions) w Write (permissions) x Execute (permissions) t Sticky bit (permissions) s Set UID or GID These values are used with the &man.chmod.1; command just like before, but with letters. For an example, you could use the following command to block other users from accessing FILE: &prompt.user; chmod go= FILE A comma separated list can be provided when more than one set of changes to a file must be made. For example the following command will remove the groups and world write permission on FILE, then it adds the execute permissions for everyone: &prompt.user; chmod go-w,a+x FILE Most users will not notice this, but it should be pointed out that using the octal method will only set or assign permissions to a file; it does not add or delete them. Directory Structure directory hierarchy The FreeBSD directory hierarchy is fundamental to obtaining an overall understanding of the system. The most important concept to grasp is that of the root directory, /. This directory is the first one mounted at boot time and it contains the base system necessary to prepare the operating system for multi-user operation. The root directory also contains mount points for every other file system that you may want to mount. A mount point is a directory where additional file systems can be grafted onto the root file system. Standard mount points include /usr, /var, /mnt, and /cdrom. These directories are usually referenced to entries in the file /etc/fstab. /etc/fstab is a table of various file systems and mount points for reference by the system. Most of the file systems in /etc/fstab are mounted automatically at boot time from the script &man.rc.8; unless they contain the option. Consult the &man.fstab.5; manual page for more information on the format of the /etc/fstab file and the options it contains. A complete description of the file system hierarchy is available in &man.hier.7;. For now, a brief overview of the most common directories will suffice. Directory Description / Root directory of the file system. /bin/ User utilities fundamental to both single-user and multi-user environments. /boot/ Programs and configuration files used during operating system bootstrap. /boot/defaults/ Default bootstrapping configuration files; see &man.loader.conf.5;. /dev/ Device nodes; see &man.intro.4;. /etc/ System configuration files and scripts. /etc/defaults/ Default system configuration files; see &man.rc.8;. /etc/mail/ Configuration files for mail transport agents such as &man.sendmail.8;. /etc/namedb/ named configuration files; see &man.named.8;. /etc/periodic/ Scripts that are run daily, weekly, and monthly, via &man.cron.8;; see &man.periodic.8;. /etc/ppp/ ppp configuration files; see &man.ppp.8;. /mnt/ Empty directory commonly used by system administrators as a temporary mount point. /proc/ Process file system; see &man.procfs.5;, &man.mount.procfs.8;. /root/ Home directory for the root account. /sbin/ System programs and administration utilities fundamental to both single-user and multi-user environments. /stand/ Programs used in a standalone environment. /tmp/ Temporary files, usually a &man.mfs.8; memory-based file system (the contents of /tmp are usually NOT preserved across a system reboot). /usr/ The majority of user utilities and applications. /usr/bin/ Common utilities, programming tools, and applications. /usr/include/ Standard C include files. /usr/lib/ Archive libraries. /usr/libdata/ Miscellaneous utility data files. /usr/libexec/ System daemons & system utilities (executed by other programs). /usr/local/ Local executables, libraries, etc. Also used as the default destination for the FreeBSD ports framework. Within /usr/local, the general layout sketched out by &man.hier.7; for /usr should be used. Exceptions are the man directory, which is directly under /usr/local rather than under /usr/local/share, and the ports documentation is in share/doc/port. /usr/obj/ Architecture-specific target tree produced by building the /usr/src tree. /usr/ports The FreeBSD ports collection (optional). /usr/sbin/ System daemons & system utilities (executed by users). /usr/share/ Architecture-independent files. /usr/src/ BSD and/or local source files. /usr/X11R6/ X11R6 distribution executables, libraries, etc (optional). /var/ Multi-purpose log, temporary, transient, and spool files. /var/log/ Miscellaneous system log files. /var/mail/ User mailbox files. /var/spool/ Miscellaneous printer and mail system spooling directories. /var/tmp/ Temporary files that are kept between system reboots. /var/yp NIS maps. Mounting and Unmounting File Systems The file system is best visualized as a tree, rooted, as it were, at /. /dev, /usr, and the other directories in the root directory are branches, which may have their own branches, such as /usr/local, and so on. root file system There are various reasons to house some of these directories on separate file systems. /var contains the directories log/, spool/, and various types of temporary files, and as such, may get filled up. Filling up the root file system is not a good idea, so splitting /var from / is often favorable. Another common reason to contain certain directory trees on other file systems is if they are to be housed on separate physical disks, or are separate virtual disks, such as Network File System mounts, or CDROM drives. The <filename>fstab</filename> File file systems mounted with fstab During the boot process, file systems listed in /etc/fstab are automatically mounted (unless they are listed with the option). The /etc/fstab file contains a list of lines of the following format: device /mount-point fstype options dumpfreq passno device A device name (which should exist), as explained in . mount-point A directory (which should exist), on which to mount the file system. fstype The file system type to pass to &man.mount.8;. The default FreeBSD file system is ufs. options Either for read-write file systems, or for read-only file systems, followed by any other options that may be needed. A common option is for file systems not normally mounted during the boot sequence. Other options are listed in the &man.mount.8; manual page. dumpfreq This is used by &man.dump.8; to determine which file systems require dumping. If the field is missing, a value of zero is assumed. passno This determines the order in which file systems should be checked. File systems that should be skipped should have their passno set to zero. The root file system (which needs to be checked before everything else) should have it's passno set to one, and other file systems' passno should be set to values greater than one. If more than one file systems have the same passno then &man.fsck.8; will attempt to check file systems in parallel if possible. The <command>mount</command> Command file systems mounting The &man.mount.8; command is what is ultimately used to mount file systems. In its most basic form, you use: &prompt.root; mount device mountpoint There are plenty of options, as mentioned in the &man.mount.8; manual page, but the most common are: Mount Options Mount all the file systems listed in /etc/fstab. Exceptions are those marked as noauto, excluded by the flag, or those that are already mounted. Do everything except for the actual system call. This option is useful in conjunction with the flag to determine what &man.mount.8; is actually trying to do. Force the mount of an unclean file system (dangerous), or forces the revocation of write access when downgrading a file system's mount status from read-write to read-only. Mount the file system read-only. This is identical to using the argument to the option. fstype Mount the given file system as the given file system type, or mount only file systems of the given type, if given the option. ufs is the default file system type. Update mount options on the file system. Be verbose. Mount the file system read-write. The option takes a comma-separated list of the options, including the following: nodev Do not interpret special devices on the file system. This is a useful security option. noexec Do not allow execution of binaries on this file system. This is also a useful security option. nosuid Do not interpret setuid or setgid flags on the file system. This is also a useful security option. The <command>umount</command> Command file systems unmounting The &man.umount.8; command takes, as a parameter, one of a mountpoint, a device name, or the or option. All forms take to force unmounting, and for verbosity. Be warned that is not generally a good idea. Forcibly unmounting file systems might crash the computer or damage data on the file system. and are used to unmount all mounted file systems, possibly modified by the file system types listed after . , however, does not attempt to unmount the root file system. Processes FreeBSD is a multi-tasking operating system. This means that it seems as though more than one program is running at once. Each program running at any one time is called a process. Every command you run will start at least one new process, and there are a number of system processes that run all the time, keeping the system functional. Each process is uniquely identified by a number called a process ID, or PID, and, like files, each process also has one owner and group. The owner and group information is used to determine what files and devices the process can open, using the file permissions discussed earlier. Most processes also have a parent process. The parent process is the process that started them. For example, if you are typing commands to the shell then the shell is a process, and any commands you run are also processes. Each process you run in this way will have your shell as its parent process. The exception to this is a special process called init. init is always the first process, so its PID is always 1. init is started automatically by the kernel when FreeBSD starts. Two commands are particularly useful to see the processes on the system, &man.ps.1; and &man.top.1;. The &man.ps.1; command is used to show a static list of the currently running processes, and can show their PID, how much memory they are using, the command line they were started with, and so on. The &man.top.1; command displays all the running processes, and updates the display every few seconds, so that you can interactively see what your computer is doing. By default, &man.ps.1; only shows you the commands that are running and are owned by you. For example: &prompt.user; ps PID TT STAT TIME COMMAND 298 p0 Ss 0:01.10 tcsh 7078 p0 S 2:40.88 xemacs mdoc.xsl (xemacs-21.1.14) 37393 p0 I 0:03.11 xemacs freebsd.dsl (xemacs-21.1.14) 48630 p0 S 2:50.89 /usr/local/lib/netscape-linux/navigator-linux-4.77.bi 48730 p0 IW 0:00.00 (dns helper) (navigator-linux-) 72210 p0 R+ 0:00.00 ps 390 p1 Is 0:01.14 tcsh 7059 p2 Is+ 1:36.18 /usr/local/bin/mutt -y 6688 p3 IWs 0:00.00 tcsh 10735 p4 IWs 0:00.00 tcsh 20256 p5 IWs 0:00.00 tcsh 262 v0 IWs 0:00.00 -tcsh (tcsh) 270 v0 IW+ 0:00.00 /bin/sh /usr/X11R6/bin/startx -- -bpp 16 280 v0 IW+ 0:00.00 xinit /home/nik/.xinitrc -- -bpp 16 284 v0 IW 0:00.00 /bin/sh /home/nik/.xinitrc 285 v0 S 0:38.45 /usr/X11R6/bin/sawfish As you can see in this example, the output from &man.ps.1; is organized into a number of columns. PID is the process ID discussed earlier. PIDs are assigned starting from 1, go up to 99999, and wrap around back to the beginning when you run out. TT shows the tty the program is running on, and can safely be ignored for the moment. STAT shows the program's state, and again, can be safely ignored. TIME is the amount of time the program has been running on the CPU—this is not necessarily the elapsed time since you started the program, as some programs spend a lot of time waiting for things to happen before they need to spend time on the CPU. Finally, COMMAND is the command line that was used to run the program. &man.ps.1; supports a number of different options to change the information that is displayed. One of the most useful sets is auxww. displays information about all the running processes, not just your own. displays the username of the process' owner, as well as memory usage. displays information about daemon processes, and causes &man.ps.1; to display the full command line, rather than truncating it once it gets too long to fit on the screen. The output from &man.top.1; is similar. A sample session looks like this: &prompt.user; top last pid: 72257; load averages: 0.13, 0.09, 0.03 up 0+13:38:33 22:39:10 47 processes: 1 running, 46 sleeping CPU states: 12.6% user, 0.0% nice, 7.8% system, 0.0% interrupt, 79.7% idle Mem: 36M Active, 5256K Inact, 13M Wired, 6312K Cache, 15M Buf, 408K Free Swap: 256M Total, 38M Used, 217M Free, 15% Inuse PID USERNAME PRI NICE SIZE RES STATE TIME WCPU CPU COMMAND 72257 nik 28 0 1960K 1044K RUN 0:00 14.86% 1.42% top 7078 nik 2 0 15280K 10960K select 2:54 0.88% 0.88% xemacs-21.1.14 281 nik 2 0 18636K 7112K select 5:36 0.73% 0.73% XF86_SVGA 296 nik 2 0 3240K 1644K select 0:12 0.05% 0.05% xterm 48630 nik 2 0 29816K 9148K select 3:18 0.00% 0.00% navigator-linu 175 root 2 0 924K 252K select 1:41 0.00% 0.00% syslogd 7059 nik 2 0 7260K 4644K poll 1:38 0.00% 0.00% mutt ... The output is split into two sections. The header (the first five lines) shows the PID of the last process to run, the system load averages (which are a measure of how busy the system is), the system uptime (time since the last reboot) and the current time. The other figures in the header relate to how many processes are running (47 in this case), how much memory and swap space has been taken up, and how much time the system is spending in different CPU states. Below that are a series of columns containing similar information to the output from &man.ps.1;. As before you can see the PID, the username, the amount of CPU time taken, and the command that was run. &man.top.1; also defaults to showing you the amount of memory space taken by the process. This is split into two columns, one for total size, and one for resident size—total size is how much memory the application has needed, and the resident size is how much it is actually using at the moment. In this example you can see that &netscape; has required almost 30 MB of RAM, but is currently only using 9 MB. &man.top.1; automatically updates this display every two seconds; this can be changed with the option. Daemons, Signals, and Killing Processes When you run an editor it is easy to control the editor, tell it to load files, and so on. You can do this because the editor provides facilities to do so, and because the editor is attached to a terminal. Some programs are not designed to be run with continuous user input, and so they disconnect from the terminal at the first opportunity. For example, a web server spends all day responding to web requests, it normally does not need any input from you. Programs that transport email from site to site are another example of this class of application. We call these programs daemons. Daemons were characters in Greek mythology; neither good or evil, they were little attendant spirits that, by and large, did useful things for mankind. Much like the web servers and mail servers of today do useful things. This is why the BSD mascot has, for a long time, been the cheerful looking daemon with sneakers and a pitchfork. There is a convention to name programs that normally run as daemons with a trailing d. BIND is the Berkeley Internet Name Daemon (and the actual program that executes is called named), the Apache web server program is called httpd, the line printer spooling daemon is lpd and so on. This is a convention, not a hard and fast rule; for example, the main mail daemon for the Sendmail application is called sendmail, and not maild, as you might imagine. Sometimes you will need to communicate with a daemon process. These communications are called signals, and you can communicate with a daemon (or with any other running process) by sending it a signal. There are a number of different signals that you can send—some of them have a specific meaning, others are interpreted by the application, and the application's documentation will tell you how that application interprets signals. You can only send a signal to a process that you own. If you send a signal to someone else's process with &man.kill.1; or &man.kill.2; permission will be denied. The exception to this is the root user, who can send signals to everyone's processes. FreeBSD will also send applications signals in some cases. If an application is badly written, and tries to access memory that it is not supposed to, FreeBSD sends the process the Segmentation Violation signal (SIGSEGV). If an application has used the &man.alarm.3; system call to be alerted after a period of time has elapsed then it will be sent the Alarm signal (SIGALRM), and so on. Two signals can be used to stop a process, SIGTERM and SIGKILL. SIGTERM is the polite way to kill a process; the process can catch the signal, realize that you want it to shut down, close any log files it may have open, and generally finish whatever it is doing at the time before shutting down. In some cases a process may even ignore SIGTERM if it is in the middle of some task that can not be interrupted. SIGKILL can not be ignored by a process. This is the I do not care what you are doing, stop right now signal. If you send SIGKILL to a process then FreeBSD will stop that process there and then Not quite true—there are a few things that can not be interrupted. For example, if the process is trying to read from a file that is on another computer on the network, and the other computer has gone away for some reason (been turned off, or the network has a fault), then the process is said to be uninterruptible. Eventually the process will time out, typically after two minutes. As soon as this time out occurs the process will be killed. . The other signals you might want to use are SIGHUP, SIGUSR1, and SIGUSR2. These are general purpose signals, and different applications will do different things when they are sent. Suppose that you have changed your web server's configuration file—you would like to tell the web server to re-read its configuration. You could stop and restart httpd, but this would result in a brief outage period on your web server, which may be undesirable. Most daemons are written to respond to the SIGHUP signal by re-reading their configuration file. So instead of killing and restarting httpd you would send it the SIGHUP signal. Because there is no standard way to respond to these signals, different daemons will have different behavior, so be sure and read the documentation for the daemon in question. Signals are sent using the &man.kill.1; command, as this example shows. Sending a Signal to a Process This example shows how to send a signal to &man.inetd.8;. The &man.inetd.8; configuration file is /etc/inetd.conf, and &man.inetd.8; will re-read this configuration file when it is sent SIGHUP. Find the process ID of the process you want to send the signal to. Do this using &man.ps.1; and &man.grep.1;. The &man.grep.1; command is used to search through output, looking for the string you specify. This command is run as a normal user, and &man.inetd.8; is run as root, so the options must be given to &man.ps.1;. &prompt.user; ps -ax | grep inetd 198 ?? IWs 0:00.00 inetd -wW So the &man.inetd.8; PID is 198. In some cases the grep inetd command might also occur in this output. This is because of the way &man.ps.1; has to find the list of running processes. Use &man.kill.1; to send the signal. Because &man.inetd.8; is being run by root you must use &man.su.1; to become root first. &prompt.user; su Password: &prompt.root; /bin/kill -s HUP 198 In common with most &unix; commands, &man.kill.1; will not print any output if it is successful. If you send a signal to a process that you do not own then you will see kill: PID: Operation not permitted. If you mistype the PID you will either send the signal to the wrong process, which could be bad, or, if you are lucky, you will have sent the signal to a PID that is not currently in use, and you will see kill: PID: No such process. Why Use <command>/bin/kill</command>? Many shells provide the kill command as a built in command; that is, the shell will send the signal directly, rather than running /bin/kill. This can be very useful, but different shells have a different syntax for specifying the name of the signal to send. Rather than try to learn all of them, it can be simpler just to use the /bin/kill ... command directly. Sending other signals is very similar, just substitute TERM or KILL in the command line as necessary. Killing random process on the system can be a bad idea. In particular, &man.init.8;, process ID 1, is very special. Running /bin/kill -s KILL 1 is a quick way to shutdown your system. Always double check the arguments you run &man.kill.1; with before you press Return. Shells shells command line In FreeBSD, a lot of everyday work is done in a command line interface called a shell. A shell's main job is to take commands from the input channel and execute them. A lot of shells also have built in functions to help everyday tasks such as file management, file globbing, command line editing, command macros, and environment variables. FreeBSD comes with a set of shells, such as sh, the Bourne Shell, and tcsh, the improved C-shell. Many other shells are available from the FreeBSD Ports Collection, such as zsh and bash. Which shell do you use? It is really a matter of taste. If you are a C programmer you might feel more comfortable with a C-like shell such as tcsh. If you have come from Linux or are new to a &unix; command line interface you might try bash. The point is that each shell has unique properties that may or may not work with your preferred working environment, and that you have a choice of what shell to use. One common feature in a shell is filename completion. Given the typing of the first few letters of a command or filename, you can usually have the shell automatically complete the rest of the command or filename by hitting the Tab key on the keyboard. Here is an example. Suppose you have two files called foobar and foo.bar. You want to delete foo.bar. So what you would type on the keyboard is: rm fo[Tab].[Tab]. The shell would print out rm foo[BEEP].bar. The [BEEP] is the console bell, which is the shell telling me it was unable to totally complete the filename because there is more than one match. Both foobar and foo.bar start with fo, but it was able to complete to foo. If you type in ., then hit Tab again, the shell would be able to fill in the rest of the filename for you. environment variables Another feature of the shell is the use of environment variables. Environment variables are a variable key pair stored in the shell's environment space. This space can be read by any program invoked by the shell, and thus contains a lot of program configuration. Here is a list of common environment variables and what they mean: environment variables Variable Description USER Current logged in user's name. PATH Colon separated list of directories to search for binaries. DISPLAY Network name of the X11 display to connect to, if available. SHELL The current shell. TERM The name of the user's terminal. Used to determine the capabilities of the terminal. TERMCAP Database entry of the terminal escape codes to perform various terminal functions. OSTYPE Type of operating system. e.g., FreeBSD. MACHTYPE The CPU architecture that the system is running on. EDITOR The user's preferred text editor. PAGER The user's preferred text pager. MANPATH Colon separated list of directories to search for manual pages. Bourne shells To set an environment variable differs somewhat from shell to shell. For example, in the C-Style shells such as tcsh and csh, you would use setenv to set environment variables. Under Bourne shells such as sh and bash, you would use export to set your current environment variables. For example, to set or modify the EDITOR environment variable, under csh or tcsh a command like this would set EDITOR to /usr/local/bin/emacs: &prompt.user; setenv EDITOR /usr/local/bin/emacs Under Bourne shells: &prompt.user; export EDITOR="/usr/local/bin/emacs" You can also make most shells expand the environment variable by placing a $ character in front of it on the command line. For example, echo $TERM would print out whatever $TERM is set to, because the shell expands $TERM and passes it on to echo. Shells treat a lot of special characters, called meta-characters as special representations of data. The most common one is the * character, which represents any number of characters in a filename. These special meta-characters can be used to do filename globbing. For example, typing in echo * is almost the same as typing in ls because the shell takes all the files that match * and puts them on the command line for echo to see. To prevent the shell from interpreting these special characters, they can be escaped from the shell by putting a backslash (\) character in front of them. echo $TERM prints whatever your terminal is set to. echo \$TERM prints $TERM as is. Changing Your Shell The easiest way to change your shell is to use the chsh command. Running chsh will place you into the editor that is in your EDITOR environment variable; if it is not set, you will be placed in vi. Change the Shell: line accordingly. You can also give chsh the option; this will set your shell for you, without requiring you to enter an editor. For example, if you wanted to change your shell to bash, the following should do the trick: &prompt.user; chsh -s /usr/local/bin/bash Running chsh with no parameters and editing the shell from there would work also. The shell that you wish to use must be present in the /etc/shells file. If you have installed a shell from the ports collection, then this should have been done for you already. If you installed the shell by hand, you must do this. For example, if you installed bash by hand and placed it into /usr/local/bin, you would want to: &prompt.root; echo "/usr/local/bin/bash" >> /etc/shells Then rerun chsh. Text Editors text editors editors A lot of configuration in FreeBSD is done by editing text files. Because of this, it would be a good idea to become familiar with a text editor. FreeBSD comes with a few as part of the base system, and many more are available in the ports collection. ee The easiest and simplest editor to learn is an editor called ee, which stands for easy editor. To start ee, one would type at the command line ee filename where filename is the name of the file to be edited. For example, to edit /etc/rc.conf, type in ee /etc/rc.conf. Once inside of ee, all of the commands for manipulating the editor's functions are listed at the top of the display. The caret ^ character means the Ctrl key on the keyboard, so ^e expands to the key combination Ctrle. To leave ee, hit the Esc key, then choose leave editor. The editor will prompt you to save any changes if the file has been modified. vi editors vi emacs editors emacs FreeBSD also comes with more powerful text editors such as vi as part of the base system, while other editors, like emacs and vim, are part of the FreeBSD Ports Collection. These editors offer much more functionality and power at the expense of being a little more complicated to learn. However if you plan on doing a lot of text editing, learning a more powerful editor such as vim or emacs will save you much more time in the long run. Devices and Device Nodes A device is a term used mostly for hardware-related activities in a system, including disks, printers, graphics cards, and keyboards. When FreeBSD boots, the majority of what FreeBSD displays are devices being detected. You can look through the boot messages again by viewing /var/run/dmesg.boot. For example, acd0 is the first IDE CDROM drive, while kbd0 represents the keyboard. Most of these devices in a &unix; operating system must be accessed through special files called device nodes, which are located in the /dev directory. Creating Device Nodes When adding a new device to your system, or compiling in support for additional devices, you may need to create one or more device nodes for the new devices. MAKEDEV Script On systems without DEVFS (this concerns all FreeBSD versions before 5.0), device nodes are created using the &man.MAKEDEV.8; script as shown below: &prompt.root; cd /dev &prompt.root; sh MAKEDEV ad1 This example would make the proper device nodes for the second IDE drive when installed. <literal>DEVFS</literal> (DEVice File System) The device file system, or DEVFS, provides access to kernel's device namespace in the global file system namespace. Instead of having to create and modify device nodes, DEVFS maintains this particular file system for you. See the &man.devfs.5; manual page for more information. DEVFS is used by default in FreeBSD 5.0 and above. Virtual Consoles and Terminals virtual consoles terminals FreeBSD can be used in various ways. One of them is typing commands to a text terminal. A lot of the flexibility and power of a &unix; operating system is readily available at your hands when using FreeBSD this way. This section describes what terminals and consoles are, and how you can use them in FreeBSD. The Console console If you have not configured FreeBSD to automatically start a graphical environment during startup, the system will present you with a login prompt after it boots, right after the startup scripts finish running. You will see something similar to: Additional ABI support:. Local package initialization:. Additional TCP options:. Fri Sep 20 13:01:06 EEST 2002 FreeBSD/i386 (pc3.example.org) (ttyv0) login: The messages might be a bit different on your system, but you will see something similar. The last two lines are what we are interested in right now. The second last line reads: FreeBSD/i386 (pc3.example.org) (ttyv0) This line contains some bits of information about the system you have just booted. You are looking at a FreeBSD console, running on an Intel or compatible processor of the x86 architecture This is what i386 means. Note that even if you are not running FreeBSD on an Intel 386 CPU, this is going to be i386. It is not the type of your processor, but the processor architecture that is shown here. . The name of this machine (every &unix; machine has a name) is pc3.example.org, and you are now looking at its system console—the ttyv0 terminal. Finally, the last line is always: login: This is the part where you are supposed to type in your username to log into FreeBSD. The next section describes how you can do this. Logging into FreeBSD FreeBSD is a multiuser, multiprocessing system. This is the formal description that is usually given to a system that can be used by many different people, who simultaneously run a lot of programs on a single machine. Every multiuser system needs some way to distinguish one user from the rest. In FreeBSD (and all the &unix; like operating systems), this is accomplished by requiring that every user must log into the system before being able to run programs. Every user has a unique name (the username) and a personal, secret key (the password). FreeBSD will ask for these two before allowing a user to run any programs. startup scripts Right after FreeBSD boots and finishes running its startup scripts Startup scripts are programs that are run automatically by FreeBSD when booting. Their main function is to set things up for everything else to run, and start any services that you have configured to run in the background doing useful things. , it will present you with a prompt and ask for a valid username: login: For the sake of this example, let us assume that your username is john. Type john at this prompt and press Enter. You should then be presented with a prompt to enter a password: login: john Password: Type in john's password now, and press Enter. The password is not echoed! You need not worry about this right now. Suffice it to say that it is done for security reasons. If you have typed your password correctly, you should by now be logged into FreeBSD and ready to try out all the available commands. Multiple Consoles Running &unix; commands in one console is fine, but FreeBSD can run many programs at once. Having one console where commands can be typed would be a bit of a waste when an operating system like FreeBSD can run dozens of programs at the same time. This is where virtual consoles can be very helpful. FreeBSD can be configured to present you with many different virtual consoles. You can switch from one of them to any other virtual console by pressing a couple of keys on your keyboard. Each console has its own different output channel, and FreeBSD takes care of properly redirecting keyboard input and monitor output as you switch from one virtual console to the next. Special key combinations have been reserved by FreeBSD for switching consoles A fairly technical and accurate description of all the details of the FreeBSD console and keyboard drivers can be found in the manual pages of &man.syscons.4;, &man.atkbd.4;, &man.vidcontrol.1; and &man.kbdcontrol.1;. We will not expand on the details here, but the interested reader can always consult the manual pages for a more detailed and thorough explanation of how things work. . You can use AltF1, AltF2, through AltF8 to switch to a different virtual console in FreeBSD. As you are switching from one console to the next, FreeBSD takes care of saving and restoring the screen output. The result is an illusion of having multiple virtual screens and keyboards that you can use to type commands for FreeBSD to run. The programs that you launch on one virtual console do not stop running when that console is not visible. They continue running when you have switched to a different virtual console. The <filename>/etc/ttys</filename> File The default configuration of FreeBSD will start up with 8 virtual consoles. This is not a hardwired setting though, and you can easily customize your installation to boot with more or fewer virtual consoles. The number and settings of the virtual consoles are configured in the /etc/ttys file. You can use the /etc/ttys file to configure the virtual consoles of FreeBSD. Each uncommented line in this file (lines that do not start with a # character) contains settings for a single terminal or virtual console. The default version of this file that ships with FreeBSD configures 9 virtual consoles, and enables 8 of them. They are the lines that start with ttyv: # name getty type status comments # ttyv0 "/usr/libexec/getty Pc" cons25 on secure # Virtual terminals ttyv1 "/usr/libexec/getty Pc" cons25 on secure ttyv2 "/usr/libexec/getty Pc" cons25 on secure ttyv3 "/usr/libexec/getty Pc" cons25 on secure ttyv4 "/usr/libexec/getty Pc" cons25 on secure ttyv5 "/usr/libexec/getty Pc" cons25 on secure ttyv6 "/usr/libexec/getty Pc" cons25 on secure ttyv7 "/usr/libexec/getty Pc" cons25 on secure ttyv8 "/usr/X11R6/bin/xdm -nodaemon" xterm off secure For a detailed description of every column in this file and all the options you can use to set things up for the virtual consoles, consult the &man.ttys.5; manual page. Single User Mode Console A detailed description of what single user mode is can be found in . It is worth noting that there is only one console when you are running FreeBSD in single user mode. There are no virtual consoles available. The settings of the single user mode console can also be found in the /etc/ttys file. Look for the line that starts with console: # name getty type status comments # # If console is marked "insecure", then init will ask for the root password # when going to single-user mode. console none unknown off secure As the comments above the console line indicate, you can edit this line and change secure to insecure. If you do that, when FreeBSD boots into single user mode, it will still ask for the root password. Be careful when changing this to insecure though. If you ever forget the root password, booting into single user mode is a bit involved. It is still possible, but it might be a bit hard for someone who is not very comfortable with the FreeBSD booting process and the programs involved. Binary Formats To understand why FreeBSD uses the ELF format, you must first know a little about the 3 currently dominant executable formats for &unix;: &man.a.out.5; The oldest and classic &unix; object format. It uses a short and compact header with a magic number at the beginning that is often used to characterize the format (see &man.a.out.5; for more details). It contains three loaded segments: .text, .data, and .bss plus a symbol table and a string table. COFF The SVR3 object format. The header now comprises a section table, so you can have more than just .text, .data, and .bss sections. ELF The successor to COFF, featuring multiple sections and 32-bit or 64-bit possible values. One major drawback: ELF was also designed with the assumption that there would be only one ABI per system architecture. That assumption is actually quite incorrect, and not even in the commercial SYSV world (which has at least three ABIs: SVR4, Solaris, SCO) does it hold true. FreeBSD tries to work around this problem somewhat by providing a utility for branding a known ELF executable with information about the ABI it is compliant with. See the manual page for &man.brandelf.1; for more information. FreeBSD comes from the classic camp and used the &man.a.out.5; format, a technology tried and proven through many generations of BSD releases, until the beginning of the 3.X branch. Though it was possible to build and run native ELF binaries (and kernels) on a FreeBSD system for some time before that, FreeBSD initially resisted the push to switch to ELF as the default format. Why? Well, when the Linux camp made their painful transition to ELF, it was not so much to flee the a.out executable format as it was their inflexible jump-table based shared library mechanism, which made the construction of shared libraries very difficult for vendors and developers alike. Since the ELF tools available offered a solution to the shared library problem and were generally seen as the way forward anyway, the migration cost was accepted as necessary and the transition made. FreeBSD's shared library mechanism is based more closely on Sun's &sunos; style shared library mechanism and, as such, is very easy to use. So, why are there so many different formats? Back in the dim, dark past, there was simple hardware. This simple hardware supported a simple, small system. a.out was completely adequate for the job of representing binaries on this simple system (a PDP-11). As people ported &unix; from this simple system, they retained the a.out format because it was sufficient for the early ports of &unix; to architectures like the Motorola 68k, VAXen, etc. Then some bright hardware engineer decided that if he could force software to do some sleazy tricks, then he would be able to shave a few gates off the design and allow his CPU core to run faster. While it was made to work with this new kind of hardware (known these days as RISC), a.out was ill-suited for this hardware, so many formats were developed to get to a better performance from this hardware than the limited, simple a.out format could offer. Things like COFF, ECOFF, and a few obscure others were invented and their limitations explored before things seemed to settle on ELF. In addition, program sizes were getting huge and disks (and physical memory) were still relatively small so the concept of a shared library was born. The VM system also became more sophisticated. While each one of these advancements was done using the a.out format, its usefulness was stretched more and more with each new feature. In addition, people wanted to dynamically load things at run time, or to junk parts of their program after the init code had run to save in core memory and swap space. Languages became more sophisticated and people wanted code called before main automatically. Lots of hacks were done to the a.out format to allow all of these things to happen, and they basically worked for a time. In time, a.out was not up to handling all these problems without an ever increasing overhead in code and complexity. While ELF solved many of these problems, it would be painful to switch from the system that basically worked. So ELF had to wait until it was more painful to remain with a.out than it was to migrate to ELF. However, as time passed, the build tools that FreeBSD derived their build tools from (the assembler and loader especially) evolved in two parallel trees. The FreeBSD tree added shared libraries and fixed some bugs. The GNU folks that originally write these programs rewrote them and added simpler support for building cross compilers, plugging in different formats at will, etc. Since many people wanted to build cross compilers targeting FreeBSD, they were out of luck since the older sources that FreeBSD had for as and ld were not up to the task. The new GNU tools chain (binutils) does support cross compiling, ELF, shared libraries, C++ extensions, etc. In addition, many vendors are releasing ELF binaries, and it is a good thing for FreeBSD to run them. ELF is more expressive than a.out and allows more extensibility in the base system. The ELF tools are better maintained, and offer cross compilation support, which is important to many people. ELF may be a little slower than a.out, but trying to measure it can be difficult. There are also numerous details that are different between the two in how they map pages, handle init code, etc. None of these are very important, but they are differences. In time support for a.out will be moved out of the GENERIC kernel, and eventually removed from the kernel once the need to run legacy a.out programs is past. For More Information Manual Pages manual pages The most comprehensive documentation on FreeBSD is in the form of manual pages. Nearly every program on the system comes with a short reference manual explaining the basic operation and various arguments. These manuals can be viewed with the man command. Use of the man command is simple: &prompt.user; man command command is the name of the command you wish to learn about. For example, to learn more about ls command type: &prompt.user; man ls The online manual is divided up into numbered sections: User commands. System calls and error numbers. Functions in the C libraries. Device drivers. File formats. Games and other diversions. Miscellaneous information. System maintenance and operation commands. Kernel developers. In some cases, the same topic may appear in more than one section of the online manual. For example, there is a chmod user command and a chmod() system call. In this case, you can tell the man command which one you want by specifying the section: &prompt.user; man 1 chmod This will display the manual page for the user command chmod. References to a particular section of the online manual are traditionally placed in parenthesis in written documentation, so &man.chmod.1; refers to the chmod user command and &man.chmod.2; refers to the system call. This is fine if you know the name of the command and simply wish to know how to use it, but what if you cannot recall the command name? You can use man to search for keywords in the command descriptions by using the switch: &prompt.user; man -k mail With this command you will be presented with a list of commands that have the keyword mail in their descriptions. This is actually functionally equivalent to using the apropos command. So, you are looking at all those fancy commands in /usr/bin but do not have the faintest idea what most of them actually do? Simply do: &prompt.user; cd /usr/bin &prompt.user; man -f * or &prompt.user; cd /usr/bin &prompt.user; whatis * which does the same thing. GNU Info Files Free Software Foundation FreeBSD includes many applications and utilities produced by the Free Software Foundation (FSF). In addition to manual pages, these programs come with more extensive hypertext documents called info files which can be viewed with the info command or, if you installed emacs, the info mode of emacs. To use the &man.info.1; command, simply type: &prompt.user; info For a brief introduction, type h. For a quick command reference, type ?. diff --git a/en_US.ISO8859-1/books/handbook/disks/chapter.sgml b/en_US.ISO8859-1/books/handbook/disks/chapter.sgml index 6697b725ad..0bc10f8fc8 100644 --- a/en_US.ISO8859-1/books/handbook/disks/chapter.sgml +++ b/en_US.ISO8859-1/books/handbook/disks/chapter.sgml @@ -1,3237 +1,3235 @@ Storage Synopsis This chapter covers the use of disks in FreeBSD. This includes memory-backed disks, network-attached disks, and standard SCSI/IDE storage devices. After reading this chapter, you will know: The terminology FreeBSD uses to describe the organization of data on a physical disk (partitions and slices). - How to mount and unmount file systems. - How to add additional hard disks to your system. How to setup virtual file systems, such as memory disks. How to use quotas to limit disk space usage. How to encrypt disks to secure them against attackers. How to create and burn CDs and DVDs on FreeBSD. The various storage media options for backups. How to use backup programs available under FreeBSD. How to backup to floppy disks. What snapshots are and how to use them efficiently. Device Names The following is a list of physical storage devices supported in FreeBSD, and the device names associated with them. Physical Disk Naming Conventions Drive type Drive device name IDE hard drives ad IDE CDROM drives acd SCSI hard drives and USB Mass storage devices da SCSI CDROM drives cd Assorted non-standard CDROM drives mcd for Mitsumi CD-ROM, scd for Sony CD-ROM, matcd for Matsushita/Panasonic CD-ROM The &man.matcd.4; driver has been removed in FreeBSD 4.X branch since October 5th, 2002 and does not exist in FreeBSD 5.0 and 5.1 releases. However this driver is back in the FreeBSD 5.X branch since June 16th, 2003. Floppy drives fd SCSI tape drives sa IDE tape drives ast Flash drives fla for &diskonchip; Flash device RAID drives aacd for &adaptec; AdvancedRAID, mlxd and mlyd for &mylex;, amrd for AMI &megaraid;, idad for Compaq Smart RAID, twed for &tm.3ware; RAID.
David O'Brien Originally contributed by Adding Disks disks adding Lets say we want to add a new SCSI disk to a machine that currently only has a single drive. First turn off the computer and install the drive in the computer following the instructions of the computer, controller, and drive manufacturer. Due to the wide variations of procedures to do this, the details are beyond the scope of this document. Login as user root. After you have installed the drive, inspect /var/run/dmesg.boot to ensure the new disk was found. Continuing with our example, the newly added drive will be da1 and we want to mount it on /1 (if you are adding an IDE drive, the device name will be wd1 in pre-4.0 systems, or ad1 in most 4.X systems). partitions slices fdisk Because FreeBSD runs on IBM-PC compatible computers, it must take into account the PC BIOS partitions. These are different from the traditional BSD partitions. A PC disk has up to four BIOS partition entries. If the disk is going to be truly dedicated to FreeBSD, you can use the dedicated mode. Otherwise, FreeBSD will have to live within one of the PC BIOS partitions. FreeBSD calls the PC BIOS partitions slices so as not to confuse them with traditional BSD partitions. You may also use slices on a disk that is dedicated to FreeBSD, but used in a computer that also has another operating system installed. This is to not confuse the fdisk utility of the other operating system. In the slice case the drive will be added as /dev/da1s1e. This is read as: SCSI disk, unit number 1 (second SCSI disk), slice 1 (PC BIOS partition 1), and e BSD partition. In the dedicated case, the drive will be added simply as /dev/da1e. Using &man.sysinstall.8; sysinstall adding disks su Navigating <application>Sysinstall</application> You may use /stand/sysinstall to partition and label a new disk using its easy to use menus. Either login as user root or use the su command. Run /stand/sysinstall and enter the Configure menu. Within the FreeBSD Configuration Menu, scroll down and select the Fdisk option. <application>fdisk</application> Partition Editor Once inside fdisk, we can type A to use the entire disk for FreeBSD. When asked if you want to remain cooperative with any future possible operating systems, answer YES. Write the changes to the disk using W. Now exit the FDISK editor by typing q. Next you will be asked about the Master Boot Record. Since you are adding a disk to an already running system, choose None. Disk Label Editor BSD partitions Next, you need to exit sysinstall and start it again. Follow the directions above, although this time choose the Label option. This will enter the Disk Label Editor. This is where you will create the traditional BSD partitions. A disk can have up to eight partitions, labeled a-h. A few of the partition labels have special uses. The a partition is used for the root partition (/). Thus only your system disk (e.g, the disk you boot from) should have an a partition. The b partition is used for swap partitions, and you may have many disks with swap partitions. The c partition addresses the entire disk in dedicated mode, or the entire FreeBSD slice in slice mode. The other partitions are for general use. sysinstall's Label editor favors the e partition for non-root, non-swap partitions. Within the Label editor, create a single file system by typing C. When prompted if this will be a FS (file system) or swap, choose FS and type in a mount point (e.g, /mnt). When adding a disk in post-install mode, sysinstall will not create entries in /etc/fstab for you, so the mount point you specify is not important. You are now ready to write the new label to the disk and create a file system on it. Do this by typing W. Ignore any errors from sysinstall that it could not mount the new partition. Exit the Label Editor and sysinstall completely. Finish The last step is to edit /etc/fstab to add an entry for your new disk. Using Command Line Utilities Using Slices This setup will allow your disk to work correctly with other operating systems that might be installed on your computer and will not confuse other operating systems' fdisk utilities. It is recommended to use this method for new disk installs. Only use dedicated mode if you have a good reason to do so! &prompt.root; dd if=/dev/zero of=/dev/da1 bs=1k count=1 &prompt.root; fdisk -BI da1 #Initialize your new disk &prompt.root; disklabel -B -w -r da1s1 auto #Label it. &prompt.root; disklabel -e da1s1 # Edit the disklabel just created and add any partitions. &prompt.root; mkdir -p /1 &prompt.root; newfs /dev/da1s1e # Repeat this for every partition you created. &prompt.root; mount /dev/da1s1e /1 # Mount the partition(s) &prompt.root; vi /etc/fstab # Add the appropriate entry/entries to your /etc/fstab. If you have an IDE disk, substitute ad for da. On pre-4.X systems use wd. Dedicated OS/2 If you will not be sharing the new drive with another operating system, you may use the dedicated mode. Remember this mode can confuse Microsoft operating systems; however, no damage will be done by them. IBM's &os2; however, will appropriate any partition it finds which it does not understand. &prompt.root; dd if=/dev/zero of=/dev/da1 bs=1k count=1 &prompt.root; disklabel -Brw da1 auto &prompt.root; disklabel -e da1 # create the `e' partition &prompt.root; newfs -d0 /dev/da1e &prompt.root; mkdir -p /1 &prompt.root; vi /etc/fstab # add an entry for /dev/da1e &prompt.root; mount /1 An alternate method is: &prompt.root; dd if=/dev/zero of=/dev/da1 count=2 &prompt.root; disklabel /dev/da1 | disklabel -BrR da1 /dev/stdin &prompt.root; newfs /dev/da1e &prompt.root; mkdir -p /1 &prompt.root; vi /etc/fstab # add an entry for /dev/da1e &prompt.root; mount /1 Since &os; 5.1-RELEASE, the &man.bsdlabel.8; utility replaces the old &man.disklabel.8; program. With &man.bsdlabel.8; a number of obsolete options and parameters have been retired; in the examples above the option should be removed with &man.bsdlabel.8;. For more information, please refer to the &man.bsdlabel.8; manual page. RAID Software RAID Christopher Shumway Original work by Jim Brown Revised by RAIDsoftware RAIDCCD Concatenated Disk Driver (CCD) Configuration When choosing a mass storage solution the most important factors to consider are speed, reliability, and cost. It is rare to have all three in balance; normally a fast, reliable mass storage device is expensive, and to cut back on cost either speed or reliability must be sacrificed. In designing the system described below, cost was chosen as the most important factor, followed by speed, then reliability. Data transfer speed for this system is ultimately constrained by the network. And while reliability is very important, the CCD drive described below serves online data that is already fully backed up on CD-R's and can easily be replaced. Defining your own requirements is the first step in choosing a mass storage solution. If your requirements prefer speed or reliability over cost, your solution will differ from the system described in this section. Installing the Hardware In addition to the IDE system disk, three Western Digital 30GB, 5400 RPM IDE disks form the core of the CCD disk described below providing approximately 90GB of online storage. Ideally, each IDE disk would have its own IDE controller and cable, but to minimize cost, additional IDE controllers were not used. Instead the disks were configured with jumpers so that each IDE controller has one master, and one slave. Upon reboot, the system BIOS was configured to automatically detect the disks attached. More importantly, FreeBSD detected them on reboot: ad0: 19574MB <WDC WD205BA> [39770/16/63] at ata0-master UDMA33 ad1: 29333MB <WDC WD307AA> [59598/16/63] at ata0-slave UDMA33 ad2: 29333MB <WDC WD307AA> [59598/16/63] at ata1-master UDMA33 ad3: 29333MB <WDC WD307AA> [59598/16/63] at ata1-slave UDMA33 If FreeBSD does not detect all the disks, ensure that you have jumpered them correctly. Most IDE drives also have a Cable Select jumper. This is not the jumper for the master/slave relationship. Consult the drive documentation for help in identifying the correct jumper. Next, consider how to attach them as part of the file system. You should research both &man.vinum.8; () and &man.ccd.4;. In this particular configuration, &man.ccd.4; was chosen. Setting Up the CCD The driver &man.ccd.4; allows you to take several identical disks and concatenate them into one logical file system. In order to use &man.ccd.4;, you need a kernel with &man.ccd.4; support built in. Add this line to your kernel configuration file, rebuild, and reinstall the kernel: pseudo-device ccd 4 On 5.X systems, you have to use instead the following line: device ccd In FreeBSD 5.X, it is not necessary to specify a number of &man.ccd.4; devices, as the &man.ccd.4; device driver is now self-cloning — new device instances will automatically be created on demand. The &man.ccd.4; support can also be loaded as a kernel loadable module in FreeBSD 3.0 or later. To set up &man.ccd.4;, you must first use &man.disklabel.8; to label the disks: disklabel -r -w ad1 auto disklabel -r -w ad2 auto disklabel -r -w ad3 auto This creates a disklabel for ad1c, ad2c and ad3c that spans the entire disk. Since &os; 5.1-RELEASE, the &man.bsdlabel.8; utility replaces the old &man.disklabel.8; program. With &man.bsdlabel.8; a number of obsolete options and parameters have been retired; in the examples above the option should be removed. For more information, please refer to the &man.bsdlabel.8; manual page. The next step is to change the disk label type. You can use &man.disklabel.8; to edit the disks: disklabel -e ad1 disklabel -e ad2 disklabel -e ad3 This opens up the current disk label on each disk with the editor specified by the EDITOR environment variable, typically &man.vi.1;. An unmodified disk label will look something like this: 8 partitions: # size offset fstype [fsize bsize bps/cpg] c: 60074784 0 unused 0 0 0 # (Cyl. 0 - 59597) Add a new e partition for &man.ccd.4; to use. This can usually be copied from the c partition, but the must be 4.2BSD. The disk label should now look something like this: 8 partitions: # size offset fstype [fsize bsize bps/cpg] c: 60074784 0 unused 0 0 0 # (Cyl. 0 - 59597) e: 60074784 0 4.2BSD 0 0 0 # (Cyl. 0 - 59597) Building the File System The device node for ccd0c may not exist yet, so to create it, perform the following commands: cd /dev sh MAKEDEV ccd0 In FreeBSD 5.0, &man.devfs.5; will automatically manage device nodes in /dev, so use of MAKEDEV is not necessary. Now that you have all of the disks labeled, you must build the &man.ccd.4;. To do that, use &man.ccdconfig.8;, with options similar to the following: ccdconfig ccd0 32 0 /dev/ad1e /dev/ad2e /dev/ad3e The use and meaning of each option is shown below: The first argument is the device to configure, in this case, /dev/ccd0c. The /dev/ portion is optional. The interleave for the file system. The interleave defines the size of a stripe in disk blocks, each normally 512 bytes. So, an interleave of 32 would be 16,384 bytes. Flags for &man.ccdconfig.8;. If you want to enable drive mirroring, you can specify a flag here. This configuration does not provide mirroring for &man.ccd.4;, so it is set at 0 (zero). The final arguments to &man.ccdconfig.8; are the devices to place into the array. Use the complete pathname for each device. After running &man.ccdconfig.8; the &man.ccd.4; is configured. A file system can be installed. Refer to &man.newfs.8; for options, or simply run: newfs /dev/ccd0c Making it All Automatic Generally, you will want to mount the &man.ccd.4; upon each reboot. To do this, you must configure it first. Write out your current configuration to /etc/ccd.conf using the following command: ccdconfig -g > /etc/ccd.conf During reboot, the script /etc/rc runs ccdconfig -C if /etc/ccd.conf exists. This automatically configures the &man.ccd.4; so it can be mounted. If you are booting into single user mode, before you can &man.mount.8; the &man.ccd.4;, you need to issue the following command to configure the array: ccdconfig -C To automatically mount the &man.ccd.4;, place an entry for the &man.ccd.4; in /etc/fstab so it will be mounted at boot time: /dev/ccd0c /media ufs rw 2 2 The Vinum Volume Manager RAIDsoftware RAID Vinum The Vinum Volume Manager is a block device driver which implements virtual disk drives. It isolates disk hardware from the block device interface and maps data in ways which result in an increase in flexibility, performance and reliability compared to the traditional slice view of disk storage. &man.vinum.8; implements the RAID-0, RAID-1 and RAID-5 models, both individually and in combination. See for more information about &man.vinum.8;. Hardware RAID RAID hardware FreeBSD also supports a variety of hardware RAID controllers. These devices control a RAID subsystem without the need for FreeBSD specific software to manage the array. Using an on-card BIOS, the card controls most of the disk operations itself. The following is a brief setup description using a Promise IDE RAID controller. When this card is installed and the system is started up, it displays a prompt requesting information. Follow the instructions to enter the card's setup screen. From here, you have the ability to combine all the attached drives. After doing so, the disk(s) will look like a single drive to FreeBSD. Other RAID levels can be set up accordingly. Rebuilding ATA RAID1 Arrays FreeBSD allows you to hot-replace a failed disk in an array. This requires that you catch it before you reboot. You will probably see something like the following in /var/log/messages or in the &man.dmesg.8; output: ad6 on monster1 suffered a hard error. ad6: READ command timeout tag=0 serv=0 - resetting ad6: trying fallback to PIO mode ata3: resetting devices .. done ad6: hard error reading fsbn 1116119 of 0-7 (ad6 bn 1116119; cn 1107 tn 4 sn 11) status=59 error=40 ar0: WARNING - mirror lost Using &man.atacontrol.8;, check for further information: &prompt.root; atacontrol list ATA channel 0: Master: no device present Slave: acd0 <HL-DT-ST CD-ROM GCR-8520B/1.00> ATA/ATAPI rev 0 ATA channel 1: Master: no device present Slave: no device present ATA channel 2: Master: ad4 <MAXTOR 6L080J4/A93.0500> ATA/ATAPI rev 5 Slave: no device present ATA channel 3: Master: ad6 <MAXTOR 6L080J4/A93.0500> ATA/ATAPI rev 5 Slave: no device present &prompt.root; atacontrol status ar0 ar0: ATA RAID1 subdisks: ad4 ad6 status: DEGRADED You will first need to detach the disk from the array so that you can safely remove it: &prompt.root; atacontrol detach 3 Replace the disk. Reattach the disk as a spare: &prompt.root; atacontrol attach 3 Master: ad6 <MAXTOR 6L080J4/A93.0500> ATA/ATAPI rev 5 Slave: no device present Rebuild the array: &prompt.root; atacontrol rebuild ar0 The rebuild command hangs until complete. However, it is possible to open another terminal (using Alt Fn) and check on the progress by issuing the following command: &prompt.root; dmesg | tail -10 [output removed] ad6: removed from configuration ad6: deleted from ar0 disk1 ad6: inserted into ar0 disk1 as spare &prompt.root; atacontrol status ar0 ar0: ATA RAID1 subdisks: ad4 ad6 status: REBUILDING 0% completed Wait until this operation completes. Mike Meyer Contributed by Creating and Using Optical Media (CDs & DVDs) CDROMs creating Introduction CDs have a number of features that differentiate them from conventional disks. Initially, they were not writable by the user. They are designed so that they can be read continuously without delays to move the head between tracks. They are also much easier to transport between systems than similarly sized media were at the time. CDs do have tracks, but this refers to a section of data to be read continuously and not a physical property of the disk. To produce a CD on FreeBSD, you prepare the data files that are going to make up the tracks on the CD, then write the tracks to the CD. ISO 9660 file systems ISO 9660 The ISO 9660 file system was designed to deal with these differences. It unfortunately codifies file system limits that were common then. Fortunately, it provides an extension mechanism that allows properly written CDs to exceed those limits while still working with systems that do not support those extensions. sysutils/mkisofs The sysutils/mkisofs program is used to produce a data file containing an ISO 9660 file system. It has options that support various extensions, and is described below. You can install it with the sysutils/mkisofs port. CD burner ATAPI Which tool to use to burn the CD depends on whether your CD burner is ATAPI or something else. ATAPI CD burners use the burncd program that is part of the base system. SCSI and USB CD burners should use cdrecord from the sysutils/cdrtools port. burncd has a limited number of supported drives. To find out if a drive is supported, see the CD-R/RW supported drives list. CD burner ATAPI/CAM driver If you run &os; 5.X, &os; 4.8-RELEASE version or higher, it will be possible to use cdrecord and other tools for SCSI drives on an ATAPI hardware with the ATAPI/CAM module. mkisofs sysutils/mkisofs produces an ISO 9660 file system that is an image of a directory tree in the &unix; file system name space. The simplest usage is: &prompt.root; mkisofs -o imagefile.iso /path/to/tree file systems ISO 9660 This command will create an imagefile.iso containing an ISO 9660 file system that is a copy of the tree at /path/to/tree. In the process, it will map the file names to names that fit the limitations of the standard ISO 9660 file system, and will exclude files that have names uncharacteristic of ISO file systems. file systems HFS file systems Joliet A number of options are available to overcome those restrictions. In particular, enables the Rock Ridge extensions common to &unix; systems, enables Joliet extensions used by Microsoft systems, and can be used to create HFS file systems used by &macos;. For CDs that are going to be used only on FreeBSD systems, can be used to disable all filename restrictions. When used with , it produces a file system image that is identical to the FreeBSD tree you started from, though it may violate the ISO 9660 standard in a number of ways. CDROMs creating bootable The last option of general use is . This is used to specify the location of the boot image for use in producing an El Torito bootable CD. This option takes an argument which is the path to a boot image from the top of the tree being written to the CD. So, given that /tmp/myboot holds a bootable FreeBSD system with the boot image in /tmp/myboot/boot/cdboot, you could produce the image of an ISO 9660 file system in /tmp/bootable.iso like so: &prompt.root; mkisofs -U -R -b boot/cdboot -o /tmp/bootable.iso /tmp/myboot Having done that, if you have vn (FreeBSD 4.X), or md (FreeBSD 5.X) configured in your kernel, you can mount the file system with: &prompt.root; vnconfig -e vn0c /tmp/bootable.iso &prompt.root; mount -t cd9660 /dev/vn0c /mnt for FreeBSD 4.X, and for FreeBSD 5.X: &prompt.root; mdconfig -a -t vnode -f /tmp/bootable.iso -u 0 &prompt.root; mount -t cd9660 /dev/md0 /mnt At which point you can verify that /mnt and /tmp/myboot are identical. There are many other options you can use with sysutils/mkisofs to fine-tune its behavior. In particular: modifications to an ISO 9660 layout and the creation of Joliet and HFS discs. See the &man.mkisofs.8; manual page for details. burncd CDROMs burning If you have an ATAPI CD burner, you can use the burncd command to burn an ISO image onto a CD. burncd is part of the base system, installed as /usr/sbin/burncd. Usage is very simple, as it has few options: &prompt.root; burncd -f cddevice data imagefile.iso fixate Will burn a copy of imagefile.iso on cddevice. The default device is /dev/acd0c. See &man.burncd.8; for options to set the write speed, eject the CD after burning, and write audio data. cdrecord If you do not have an ATAPI CD burner, you will have to use cdrecord to burn your CDs. cdrecord is not part of the base system; you must install it from either the port at sysutils/cdrtools or the appropriate package. Changes to the base system can cause binary versions of this program to fail, possibly resulting in a coaster. You should therefore either upgrade the port when you upgrade your system, or if you are tracking -STABLE, upgrade the port when a new version becomes available. While cdrecord has many options, basic usage is even simpler than burncd. Burning an ISO 9660 image is done with: &prompt.root; cdrecord dev=device imagefile.iso The tricky part of using cdrecord is finding the to use. To find the proper setting, use the flag of cdrecord, which might produce results like this: CDROMs burning &prompt.root; cdrecord -scanbus Cdrecord 1.9 (i386-unknown-freebsd4.2) Copyright (C) 1995-2000 Jörg Schilling Using libscg version 'schily-0.1' scsibus0: 0,0,0 0) 'SEAGATE ' 'ST39236LW ' '0004' Disk 0,1,0 1) 'SEAGATE ' 'ST39173W ' '5958' Disk 0,2,0 2) * 0,3,0 3) 'iomega ' 'jaz 1GB ' 'J.86' Removable Disk 0,4,0 4) 'NEC ' 'CD-ROM DRIVE:466' '1.26' Removable CD-ROM 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * scsibus1: 1,0,0 100) * 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) 'YAMAHA ' 'CRW4260 ' '1.0q' Removable CD-ROM 1,6,0 106) 'ARTEC ' 'AM12S ' '1.06' Scanner 1,7,0 107) * This lists the appropriate value for the devices on the list. Locate your CD burner, and use the three numbers separated by commas as the value for . In this case, the CRW device is 1,5,0, so the appropriate input would be . There are easier ways to specify this value; see &man.cdrecord.1; for details. That is also the place to look for information on writing audio tracks, controlling the speed, and other things. Duplicating Audio CDs You can duplicate an audio CD by extracting the audio data from the CD to a series of files, and then writing these files to a blank CD. The process is slightly different for ATAPI and SCSI drives. SCSI Drives Use cdda2wav to extract the audio. &prompt.user; cdda2wav -v255 -D2,0 -B -Owav Use cdrecord to write the .wav files. &prompt.user; cdrecord -v dev=2,0 -dao -useinfo *.wav Make sure that 2.0 is set appropriately, as described in . ATAPI Drives The ATAPI CD driver makes each track available as /dev/acddtnn, where d is the drive number, and nn is the track number written with two decimal digits, prefixed with zero as needed. So the first track on the first disk is /dev/acd0t01, the second is /dev/acd0t02, the third is /dev/acd0t03, and so on. Make sure the appropriate files exist in /dev. &prompt.root; cd /dev &prompt.root; sh MAKEDEV acd0t99 In FreeBSD 5.0, &man.devfs.5; will automatically create and manage entries in /dev for you, so it is not necessary to use MAKEDEV. Extract each track using &man.dd.1;. You must also use a specific block size when extracting the files. &prompt.root; dd if=/dev/acd0t01 of=track1.cdr bs=2352 &prompt.root; dd if=/dev/acd0t02 of=track2.cdr bs=2352 ... Burn the extracted files to disk using burncd. You must specify that these are audio files, and that burncd should fixate the disk when finished. &prompt.root; burncd -f /dev/acd0c audio track1.cdr track2.cdr ... fixate Duplicating Data CDs You can copy a data CD to a image file that is functionally equivalent to the image file created with sysutils/mkisofs, and you can use it to duplicate any data CD. The example given here assumes that your CDROM device is acd0. Substitute your correct CDROM device. A c must be appended to the end of the device name to indicate the entire partition or, in the case of CDROMs, the entire disc. &prompt.root; dd if=/dev/acd0c of=file.iso bs=2048 Now that you have an image, you can burn it to CD as described above. Using Data CDs Now that you have created a standard data CDROM, you probably want to mount it and read the data on it. By default, &man.mount.8; assumes that a file system is of type ufs. If you try something like: &prompt.root; mount /dev/cd0c /mnt you will get a complaint about Incorrect super block, and no mount. The CDROM is not a UFS file system, so attempts to mount it as such will fail. You just need to tell &man.mount.8; that the file system is of type ISO9660, and everything will work. You do this by specifying the option &man.mount.8;. For example, if you want to mount the CDROM device, /dev/cd0c, under /mnt, you would execute: &prompt.root; mount -t cd9660 /dev/cd0c /mnt Note that your device name (/dev/cd0c in this example) could be different, depending on the interface your CDROM uses. Also, the option just executes &man.mount.cd9660.8;. The above example could be shortened to: &prompt.root; mount_cd9660 /dev/cd0c /mnt You can generally use data CDROMs from any vendor in this way. Disks with certain ISO 9660 extensions might behave oddly, however. For example, Joliet disks store all filenames in two-byte Unicode characters. The FreeBSD kernel does not speak Unicode (yet!), so non-English characters show up as question marks. (If you are running FreeBSD 4.3 or later, the CD9660 driver includes hooks to load an appropriate Unicode conversion table on the fly. Modules for some of the common encodings are available via the sysutils/cd9660_unicode port.) Occasionally, you might get Device not configured when trying to mount a CDROM. This usually means that the CDROM drive thinks that there is no disk in the tray, or that the drive is not visible on the bus. It can take a couple of seconds for a CDROM drive to realize that it has been fed, so be patient. Sometimes, a SCSI CDROM may be missed because it didn't have enough time to answer the bus reset. If you have a SCSI CDROM please add the following option to your kernel configuration and rebuild your kernel. options SCSI_DELAY=15000 This tells your SCSI bus to pause 15 seconds during boot, to give your CDROM drive every possible chance to answer the bus reset. Burning Raw Data CDs You can choose to burn a file directly to CD, without creating an ISO 9660 file system. Some people do this for backup purposes. This runs more quickly than burning a standard CD: &prompt.root; burncd -f /dev/acd1c -s 12 data archive.tar.gz fixate In order to retrieve the data burned to such a CD, you must read data from the raw device node: &prompt.root; tar xzvf /dev/acd1c You cannot mount this disk as you would a normal CDROM. Such a CDROM cannot be read under any operating system except FreeBSD. If you want to be able to mount the CD, or share data with another operating system, you must use sysutils/mkisofs as described above. CD burner ATAPI/CAM driver Using the ATAPI/CAM Driver This driver allows ATAPI devices (CD-ROM, CD-RW, DVD drives etc...) to be accessed through the SCSI subsystem, and so allows the use of applications like sysutils/cdrdao or &man.cdrecord.1;. To use this driver, you will need to add the following lines to your kernel configuration file: device atapicam device scbus device cd device pass You also need the following lines in your kernel configuration file: device ata device atapicd Both of which should already be present. Then rebuild, install your new kernel, and reboot your machine. During the boot process, your burner should show up, like so: acd0: CD-RW <MATSHITA CD-RW/DVD-ROM UJDA740> at ata1-master PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: <MATSHITA CDRW/DVD UJDA740 1.00> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed The drive could now be accessed via the /dev/cd0 device name, for example to mount a CD-ROM on /mnt, just type the following: &prompt.root; mount -t cd9660 /dev/cd0c /mnt As root, you can run the following command to get the SCSI address of the burner: &prompt.root; camcontrol devlist <MATSHITA CDRW/DVD UJDA740 1.00> at scbus1 target 0 lun 0 (pass0,cd0) So 1,0,0 will be the SCSI address to use with &man.cdrecord.1; and other SCSI application. For more information about ATAPI/CAM and SCSI system, refer to the &man.atapicam.4; and &man.cam.4; manual pages. Julio Merino Original work by Martin Karlsson Rewritten by Creating and Using Floppy Disks Storing data on floppy disks is sometimes useful, for example when one does not have any other removable storage media or when one needs to transfer small amounts of data to another computer. This section will explain how to use floppy disks in FreeBSD. It will primarily cover formatting and usage of 3.5inch DOS floppies, but the concepts are similar for other floppy disk formats. Formatting Floppies The Device Floppy disks are accessed through entries in /dev, just like other devices. To access the raw floppy disk in 4.X and earlier releases, one uses /dev/fdN, where N stands for the drive number, usually 0, or /dev/fdNX, where X stands for a letter. In 5.0 or newer releases, simply use /dev/fdN. The Disk Size in 4.X and Earlier Releases There are also /dev/fdN.size devices, where size is a floppy disk size in kilobytes. These entries are used at low-level format time to determine the disk size. 1440kB is the size that will be used in the following examples. Sometimes the entries under /dev will have to be (re)created. To do that, issue: &prompt.root; cd /dev && ./MAKEDEV "fd*" The Disk Size in 5.0 and Newer Releases In 5.0, &man.devfs.5; will automatically manage device nodes in /dev, so use of MAKEDEV is not necessary. The desired disk size is passed to &man.fdformat.1; through the flag. Supported sizes are listed in &man.fdcontrol.8;, but be advised that 1440kB is what works best. Formatting A floppy disk needs to be low-level formated before it can be used. This is usually done by the vendor, but formatting is a good way to check media integrity. Although it is possible to force larger (or smaller) disk sizes, 1440kB is what most floppy disks are designed for. To low-level format the floppy disk you need to use &man.fdformat.1;. This utility expects the device name as an argument. Make note of any error messages, as these can help determine if the disk is good or bad. Formatting in 4.X and Earlier Releases Use the /dev/fdN.size devices to format the floppy. Insert a new 3.5inch floppy disk in your drive and issue: &prompt.root; /usr/sbin/fdformat /dev/fd0.1440 Formatting in 5.0 and Newer Releases Use the /dev/fdN devices to format the floppy. Insert a new 3.5inch floppy disk in your drive and issue: &prompt.root; /usr/sbin/fdformat -f 1440 /dev/fd0 The Disk Label After low-level formatting the disk, you will need to place a disk label on it. This disk label will be destroyed later, but it is needed by the system to determine the size of the disk and its geometry later. The new disk label will take over the whole disk, and will contain all the proper information about the geometry of the floppy. The geometry values for the disk label are listed in /etc/disktab. You can run now &man.disklabel.8; like so: &prompt.root; /sbin/disklabel -B -r -w /dev/fd0 fd1440 Since &os; 5.1-RELEASE, the &man.bsdlabel.8; utility replaces the old &man.disklabel.8; program. With &man.bsdlabel.8; a number of obsolete options and parameters have been retired; in the example above the option should be removed. For more information, please refer to the &man.bsdlabel.8; manual page. The File System Now the floppy is ready to be high-level formated. This will place a new file system on it, which will let FreeBSD read and write to the disk. After creating the new file system, the disk label is destroyed, so if you want to reformat the disk, you will have to recreate the disk label. The floppy's file system can be either UFS or FAT. FAT is generally a better choice for floppies. To put a new file system on the floppy, issue: &prompt.root; /sbin/newfs_msdos /dev/fd0 The disk is now ready for use. Using the Floppy To use the floppy, mount it with &man.mount.msdos.8; (in 4.X and earlier releases) or &man.mount.msdosfs.8; (in 5.0 or newer releases). One can also use emulators/mtools from the ports collection. Creating and Using Data Tapes tape media The major tape media are the 4mm, 8mm, QIC, mini-cartridge and DLT. 4mm (DDS: Digital Data Storage) tape media DDS (4mm) tapes tape media QIC tapes 4mm tapes are replacing QIC as the workstation backup media of choice. This trend accelerated greatly when Conner purchased Archive, a leading manufacturer of QIC drives, and then stopped production of QIC drives. 4mm drives are small and quiet but do not have the reputation for reliability that is enjoyed by 8mm drives. The cartridges are less expensive and smaller (3 x 2 x 0.5 inches, 76 x 51 x 12 mm) than 8mm cartridges. 4mm, like 8mm, has comparatively short head life for the same reason, both use helical scan. Data throughput on these drives starts ~150 kB/s, peaking at ~500 kB/s. Data capacity starts at 1.3 GB and ends at 2.0 GB. Hardware compression, available with most of these drives, approximately doubles the capacity. Multi-drive tape library units can have 6 drives in a single cabinet with automatic tape changing. Library capacities reach 240 GB. The DDS-3 standard now supports tape capacities up to 12 GB (or 24 GB compressed). 4mm drives, like 8mm drives, use helical-scan. All the benefits and drawbacks of helical-scan apply to both 4mm and 8mm drives. Tapes should be retired from use after 2,000 passes or 100 full backups. 8mm (Exabyte) tape media Exabyte (8mm) tapes 8mm tapes are the most common SCSI tape drives; they are the best choice of exchanging tapes. Nearly every site has an Exabyte 2 GB 8mm tape drive. 8mm drives are reliable, convenient and quiet. Cartridges are inexpensive and small (4.8 x 3.3 x 0.6 inches; 122 x 84 x 15 mm). One downside of 8mm tape is relatively short head and tape life due to the high rate of relative motion of the tape across the heads. Data throughput ranges from ~250 kB/s to ~500 kB/s. Data sizes start at 300 MB and go up to 7 GB. Hardware compression, available with most of these drives, approximately doubles the capacity. These drives are available as single units or multi-drive tape libraries with 6 drives and 120 tapes in a single cabinet. Tapes are changed automatically by the unit. Library capacities reach 840+ GB. The Exabyte Mammoth model supports 12 GB on one tape (24 GB with compression) and costs approximately twice as much as conventional tape drives. Data is recorded onto the tape using helical-scan, the heads are positioned at an angle to the media (approximately 6 degrees). The tape wraps around 270 degrees of the spool that holds the heads. The spool spins while the tape slides over the spool. The result is a high density of data and closely packed tracks that angle across the tape from one edge to the other. QIC tape media QIC-150 QIC-150 tapes and drives are, perhaps, the most common tape drive and media around. QIC tape drives are the least expensive serious backup drives. The downside is the cost of media. QIC tapes are expensive compared to 8mm or 4mm tapes, up to 5 times the price per GB data storage. But, if your needs can be satisfied with a half-dozen tapes, QIC may be the correct choice. QIC is the most common tape drive. Every site has a QIC drive of some density or another. Therein lies the rub, QIC has a large number of densities on physically similar (sometimes identical) tapes. QIC drives are not quiet. These drives audibly seek before they begin to record data and are clearly audible whenever reading, writing or seeking. QIC tapes measure (6 x 4 x 0.7 inches; 15.2 x 10.2 x 1.7 mm). Mini-cartridges, which also use 1/4" wide tape are discussed separately. Tape libraries and changers are not available. Data throughput ranges from ~150 kB/s to ~500 kB/s. Data capacity ranges from 40 MB to 15 GB. Hardware compression is available on many of the newer QIC drives. QIC drives are less frequently installed; they are being supplanted by DAT drives. Data is recorded onto the tape in tracks. The tracks run along the long axis of the tape media from one end to the other. The number of tracks, and therefore the width of a track, varies with the tape's capacity. Most if not all newer drives provide backward-compatibility at least for reading (but often also for writing). QIC has a good reputation regarding the safety of the data (the mechanics are simpler and more robust than for helical scan drives). Tapes should be retired from use after 5,000 backups. XXX* Mini-Cartridge DLT tape media DLT DLT has the fastest data transfer rate of all the drive types listed here. The 1/2" (12.5mm) tape is contained in a single spool cartridge (4 x 4 x 1 inches; 100 x 100 x 25 mm). The cartridge has a swinging gate along one entire side of the cartridge. The drive mechanism opens this gate to extract the tape leader. The tape leader has an oval hole in it which the drive uses to hook the tape. The take-up spool is located inside the tape drive. All the other tape cartridges listed here (9 track tapes are the only exception) have both the supply and take-up spools located inside the tape cartridge itself. Data throughput is approximately 1.5 MB/s, three times the throughput of 4mm, 8mm, or QIC tape drives. Data capacities range from 10 GB to 20 GB for a single drive. Drives are available in both multi-tape changers and multi-tape, multi-drive tape libraries containing from 5 to 900 tapes over 1 to 20 drives, providing from 50 GB to 9 TB of storage. With compression, DLT Type IV format supports up to 70 GB capacity. Data is recorded onto the tape in tracks parallel to the direction of travel (just like QIC tapes). Two tracks are written at once. Read/write head lifetimes are relatively long; once the tape stops moving, there is no relative motion between the heads and the tape. AIT tape media AIT AIT is a new format from Sony, and can hold up to 50 GB (with compression) per tape. The tapes contain memory chips which retain an index of the tape's contents. This index can be rapidly read by the tape drive to determine the position of files on the tape, instead of the several minutes that would be required for other tapes. Software such as SAMS:Alexandria can operate forty or more AIT tape libraries, communicating directly with the tape's memory chip to display the contents on screen, determine what files were backed up to which tape, locate the correct tape, load it, and restore the data from the tape. Libraries like this cost in the region of $20,000, pricing them a little out of the hobbyist market. Using a New Tape for the First Time The first time that you try to read or write a new, completely blank tape, the operation will fail. The console messages should be similar to: sa0(ncr1:4:0): NOT READY asc:4,1 sa0(ncr1:4:0): Logical unit is in process of becoming ready The tape does not contain an Identifier Block (block number 0). All QIC tape drives since the adoption of QIC-525 standard write an Identifier Block to the tape. There are two solutions: mt fsf 1 causes the tape drive to write an Identifier Block to the tape. Use the front panel button to eject the tape. Re-insert the tape and dump data to the tape. dump will report DUMP: End of tape detected and the console will show: HARDWARE FAILURE info:280 asc:80,96. rewind the tape using: mt rewind. Subsequent tape operations are successful. Backups to Floppies Can I Use Floppies for Backing Up My Data? backup floppies floppy disks Floppy disks are not really a suitable media for making backups as: The media is unreliable, especially over long periods of time. Backing up and restoring is very slow. They have a very limited capacity (the days of backing up an entire hard disk onto a dozen or so floppies has long since passed). However, if you have no other method of backing up your data then floppy disks are better than no backup at all. If you do have to use floppy disks then ensure that you use good quality ones. Floppies that have been lying around the office for a couple of years are a bad choice. Ideally use new ones from a reputable manufacturer. So How Do I Backup My Data to Floppies? The best way to backup to floppy disk is to use &man.tar.1; with the (multi volume) option, which allows backups to span multiple floppies. To backup all the files in the current directory and sub-directory use this (as root): &prompt.root; tar Mcvf /dev/fd0 * When the first floppy is full &man.tar.1; will prompt you to insert the next volume (because &man.tar.1; is media independent it refers to volumes; in this context it means floppy disk). Prepare volume #2 for /dev/fd0 and hit return: This is repeated (with the volume number incrementing) until all the specified files have been archived. Can I Compress My Backups? tar gzip compression Unfortunately, &man.tar.1; will not allow the option to be used for multi-volume archives. You could, of course, &man.gzip.1; all the files, &man.tar.1; them to the floppies, then &man.gunzip.1; the files again! How Do I Restore My Backups? To restore the entire archive use: &prompt.root; tar Mxvf /dev/fd0 There are two ways that you can use to restore only specific files. First, you can start with the first floppy and use: &prompt.root; tar Mxvf /dev/fd0 filename The utility &man.tar.1; will prompt you to insert subsequent floppies until it finds the required file. Alternatively, if you know which floppy the file is on then you can simply insert that floppy and use the same command as above. Note that if the first file on the floppy is a continuation from the previous one then &man.tar.1; will warn you that it cannot restore it, even if you have not asked it to! Backup Basics The three major backup programs are &man.dump.8;, &man.tar.1;, and &man.cpio.1;. Dump and Restore backup software dump / restore dump restore The traditional &unix; backup programs are dump and restore. They operate on the drive as a collection of disk blocks, below the abstractions of files, links and directories that are created by the file systems. dump backs up an entire file system on a device. It is unable to backup only part of a file system or a directory tree that spans more than one file system. dump does not write files and directories to tape, but rather writes the raw data blocks that comprise files and directories. If you use dump on your root directory, you would not back up /home, /usr or many other directories since these are typically mount points for other file systems or symbolic links into those file systems. dump has quirks that remain from its early days in Version 6 of AT&T UNIX (circa 1975). The default parameters are suitable for 9-track tapes (6250 bpi), not the high-density media available today (up to 62,182 ftpi). These defaults must be overridden on the command line to utilize the capacity of current tape drives. .rhosts It is also possible to backup data across the network to a tape drive attached to another computer with rdump and rrestore. Both programs rely upon rcmd and ruserok to access the remote tape drive. Therefore, the user performing the backup must be listed in the .rhosts file on the remote computer. The arguments to rdump and rrestore must be suitable to use on the remote computer. When rdumping from a FreeBSD computer to an Exabyte tape drive connected to a Sun called komodo, use: &prompt.root; /sbin/rdump 0dsbfu 54000 13000 126 komodo:/dev/nsa8 /dev/da0a 2>&1 Beware: there are security implications to allowing .rhosts authentication. Evaluate your situation carefully. It is also possible to use dump and restore in a more secure fashion over ssh. Using <command>dump</command> over <application>ssh</application> &prompt.root; /sbin/dump -0uan -f - /usr | gzip -2 | ssh1 -c blowfish \ targetuser@targetmachine.example.com dd of=/mybigfiles/dump-usr-l0.gz <command>tar</command> backup software tar &man.tar.1; also dates back to Version 6 of AT&T UNIX (circa 1975). tar operates in cooperation with the file system; tar writes files and directories to tape. tar does not support the full range of options that are available from &man.cpio.1;, but tar does not require the unusual command pipeline that cpio uses. tar Most versions of tar do not support backups across the network. The GNU version of tar, which FreeBSD utilizes, supports remote devices using the same syntax as rdump. To tar to an Exabyte tape drive connected to a Sun called komodo, use: &prompt.root; /usr/bin/tar cf komodo:/dev/nsa8 . 2>&1 For versions without remote device support, you can use a pipeline and rsh to send the data to a remote tape drive. &prompt.root; tar cf - . | rsh hostname dd of=tape-device obs=20b If you are worried about the security of backing up over a network you should use the ssh command instead of rsh. <command>cpio</command> backup software cpio &man.cpio.1; is the original &unix; file interchange tape program for magnetic media. cpio has options (among many others) to perform byte-swapping, write a number of different archive formats, and pipe the data to other programs. This last feature makes cpio an excellent choice for installation media. cpio does not know how to walk the directory tree and a list of files must be provided through stdin. cpio cpio does not support backups across the network. You can use a pipeline and rsh to send the data to a remote tape drive. &prompt.root; for f in directory_list; do find $f >> backup.list done &prompt.root; cpio -v -o --format=newc < backup.list | ssh user@host "cat > backup_device" Where directory_list is the list of directories you want to back up, user@host is the user/hostname combination that will be performing the backups, and backup_device is where the backups should be written to (e.g., /dev/nsa0). <command>pax</command> backup software pax pax POSIX IEEE &man.pax.1; is IEEE/&posix;'s answer to tar and cpio. Over the years the various versions of tar and cpio have gotten slightly incompatible. So rather than fight it out to fully standardize them, &posix; created a new archive utility. pax attempts to read and write many of the various cpio and tar formats, plus new formats of its own. Its command set more resembles cpio than tar. <application>Amanda</application> backup software Amanda Amanda Amanda (Advanced Maryland Network Disk Archiver) is a client/server backup system, rather than a single program. An Amanda server will backup to a single tape drive any number of computers that have Amanda clients and a network connection to the Amanda server. A common problem at sites with a number of large disks is that the length of time required to backup to data directly to tape exceeds the amount of time available for the task. Amanda solves this problem. Amanda can use a holding disk to backup several file systems at the same time. Amanda creates archive sets: a group of tapes used over a period of time to create full backups of all the file systems listed in Amanda's configuration file. The archive set also contains nightly incremental (or differential) backups of all the file systems. Restoring a damaged file system requires the most recent full backup and the incremental backups. The configuration file provides fine control of backups and the network traffic that Amanda generates. Amanda will use any of the above backup programs to write the data to tape. Amanda is available as either a port or a package, it is not installed by default. Do Nothing Do nothing is not a computer program, but it is the most widely used backup strategy. There are no initial costs. There is no backup schedule to follow. Just say no. If something happens to your data, grin and bear it! If your time and your data is worth little to nothing, then Do nothing is the most suitable backup program for your computer. But beware, &unix; is a useful tool, you may find that within six months you have a collection of files that are valuable to you. Do nothing is the correct backup method for /usr/obj and other directory trees that can be exactly recreated by your computer. An example is the files that comprise the HTML or &postscript; version of this Handbook. These document formats have been created from SGML input files. Creating backups of the HTML or &postscript; files is not necessary. The SGML files are backed up regularly. Which Backup Program Is Best? LISA &man.dump.8; Period. Elizabeth D. Zwicky torture tested all the backup programs discussed here. The clear choice for preserving all your data and all the peculiarities of &unix; file systems is dump. Elizabeth created file systems containing a large variety of unusual conditions (and some not so unusual ones) and tested each program by doing a backup and restore of those file systems. The peculiarities included: files with holes, files with holes and a block of nulls, files with funny characters in their names, unreadable and unwritable files, devices, files that change size during the backup, files that are created/deleted during the backup and more. She presented the results at LISA V in Oct. 1991. See torture-testing Backup and Archive Programs. Emergency Restore Procedure Before the Disaster There are only four steps that you need to perform in preparation for any disaster that may occur. disklabel First, print the disklabel from each of your disks (e.g. disklabel da0 | lpr), your file system table (/etc/fstab) and all boot messages, two copies of each. fix-it floppies Second, determine that the boot and fix-it floppies (boot.flp and fixit.flp) have all your devices. The easiest way to check is to reboot your machine with the boot floppy in the floppy drive and check the boot messages. If all your devices are listed and functional, skip on to step three. Otherwise, you have to create two custom bootable floppies which have a kernel that can mount all of your disks and access your tape drive. These floppies must contain: fdisk, disklabel, newfs, mount, and whichever backup program you use. These programs must be statically linked. If you use dump, the floppy must contain restore. Third, create backup tapes regularly. Any changes that you make after your last backup may be irretrievably lost. Write-protect the backup tapes. Fourth, test the floppies (either boot.flp and fixit.flp or the two custom bootable floppies you made in step two.) and backup tapes. Make notes of the procedure. Store these notes with the bootable floppy, the printouts and the backup tapes. You will be so distraught when restoring that the notes may prevent you from destroying your backup tapes (How? In place of tar xvf /dev/sa0, you might accidentally type tar cvf /dev/sa0 and over-write your backup tape). For an added measure of security, make bootable floppies and two backup tapes each time. Store one of each at a remote location. A remote location is NOT the basement of the same office building. A number of firms in the World Trade Center learned this lesson the hard way. A remote location should be physically separated from your computers and disk drives by a significant distance. A Script for Creating a Bootable Floppy /mnt/sbin/init gzip -c -best /sbin/fsck > /mnt/sbin/fsck gzip -c -best /sbin/mount > /mnt/sbin/mount gzip -c -best /sbin/halt > /mnt/sbin/halt gzip -c -best /sbin/restore > /mnt/sbin/restore gzip -c -best /bin/sh > /mnt/bin/sh gzip -c -best /bin/sync > /mnt/bin/sync cp /root/.profile /mnt/root cp -f /dev/MAKEDEV /mnt/dev chmod 755 /mnt/dev/MAKEDEV chmod 500 /mnt/sbin/init chmod 555 /mnt/sbin/fsck /mnt/sbin/mount /mnt/sbin/halt chmod 555 /mnt/bin/sh /mnt/bin/sync chmod 6555 /mnt/sbin/restore # # create the devices nodes # cd /mnt/dev ./MAKEDEV std ./MAKEDEV da0 ./MAKEDEV da1 ./MAKEDEV da2 ./MAKEDEV sa0 ./MAKEDEV pty0 cd / # # create minimum file system table # cat > /mnt/etc/fstab < /mnt/etc/passwd < /mnt/etc/master.passwd < After the Disaster The key question is: did your hardware survive? You have been doing regular backups so there is no need to worry about the software. If the hardware has been damaged, the parts should be replaced before attempting to use the computer. If your hardware is okay, check your floppies. If you are using a custom boot floppy, boot single-user (type -s at the boot: prompt). Skip the following paragraph. If you are using the boot.flp and fixit.flp floppies, keep reading. Insert the boot.flp floppy in the first floppy drive and boot the computer. The original install menu will be displayed on the screen. Select the Fixit--Repair mode with CDROM or floppy. option. Insert the fixit.flp when prompted. restore and the other programs that you need are located in /mnt2/stand. Recover each file system separately. mount root partition disklabel newfs Try to mount (e.g. mount /dev/da0a /mnt) the root partition of your first disk. If the disklabel was damaged, use disklabel to re-partition and label the disk to match the label that you printed and saved. Use newfs to re-create the file systems. Re-mount the root partition of the floppy read-write (mount -u -o rw /mnt). Use your backup program and backup tapes to recover the data for this file system (e.g. restore vrf /dev/sa0). Unmount the file system (e.g. umount /mnt). Repeat for each file system that was damaged. Once your system is running, backup your data onto new tapes. Whatever caused the crash or data loss may strike again. Another hour spent now may save you from further distress later. * I Did Not Prepare for the Disaster, What Now? ]]> Marc Fonvieille Reorganized and enhanced by Network, Memory, and File-Backed File Systems virtual disks disks virtual Aside from the disks you physically insert into your computer: floppies, CDs, hard drives, and so forth; other forms of disks are understood by FreeBSD - the virtual disks. NFS Coda disks memory These include network file systems such as the Network File System and Coda, memory-based file systems and file-backed file systems. According to the FreeBSD version you run, you will have to use different tools for creation and use of file-backed and memory-based file systems. The FreeBSD 4.X users will have to use &man.MAKEDEV.8; to create the required devices. FreeBSD 5.0 and later use &man.devfs.5; to allocate device nodes transparently for the user. File-Backed File System under FreeBSD 4.X disks file-backed (4.X) The utility &man.vnconfig.8; configures and enables vnode pseudo-disk devices. A vnode is a representation of a file, and is the focus of file activity. This means that &man.vnconfig.8; uses files to create and operate a file system. One possible use is the mounting of floppy or CD images kept in files. To use &man.vnconfig.8;, you need &man.vn.4; support in your kernel configuration file: pseudo-device vn To mount an existing file system image: Using vnconfig to Mount an Existing File System Image under FreeBSD 4.X &prompt.root; vnconfig vn0 diskimage &prompt.root; mount /dev/vn0c /mnt To create a new file system image with &man.vnconfig.8;: Creating a New File-Backed Disk with <command>vnconfig</command> &prompt.root; dd if=/dev/zero of=newimage bs=1k count=5k 5120+0 records in 5120+0 records out &prompt.root; vnconfig -s labels -c vn0 newimage &prompt.root; disklabel -r -w vn0 auto &prompt.root; newfs vn0c Warning: 2048 sector(s) in last cylinder unallocated /dev/vn0c: 10240 sectors in 3 cylinders of 1 tracks, 4096 sectors 5.0MB in 1 cyl groups (16 c/g, 32.00MB/g, 1280 i/g) super-block backups (for fsck -b #) at: 32 &prompt.root; mount /dev/vn0c /mnt &prompt.root; df /mnt Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/vn0c 4927 1 4532 0% /mnt File-Backed File System under FreeBSD 5.X disks file-backed (5.X) The utility &man.mdconfig.8; is used to configure and enable memory disks, &man.md.4;, under FreeBSD 5.X. To use &man.mdconfig.8;, you have to load &man.md.4; module or to add the support in your kernel configuration file: device md The &man.mdconfig.8; command supports three kinds of memory backed virtual disks: memory disks allocated with &man.malloc.9;, memory disks using a file or swap space as backing. One possible use is the mounting of floppy or CD images kept in files. To mount an existing file system image: Using <command>mdconfig</command> to Mount an Existing File System Image under FreeBSD 5.X &prompt.root; mdconfig -a -t vnode -f diskimage -u 0 &prompt.root; mount /dev/md0c /mnt To create a new file system image with &man.mdconfig.8;: Creating a New File-Backed Disk with <command>mdconfig</command> &prompt.root; dd if=/dev/zero of=newimage bs=1k count=5k 5120+0 records in 5120+0 records out &prompt.root; mdconfig -a -t vnode -f newimage -u 0 &prompt.root; disklabel -r -w md0 auto &prompt.root; newfs md0c /dev/md0c: 5.0MB (10240 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 1.27MB, 81 blks, 256 inodes. super-block backups (for fsck -b #) at: 32, 2624, 5216, 7808 &prompt.root; mount /dev/md0c /mnt &prompt.root; df /mnt Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/md0c 4846 2 4458 0% /mnt If you do not specify the unit number with the option, &man.mdconfig.8; will use the &man.md.4; automatic allocation to select an unused device. The name of the allocated unit will be output on stdout like md4. For more details about &man.mdconfig.8;, please refer to the manual page. Since &os; 5.1-RELEASE, the &man.bsdlabel.8; utility replaces the old &man.disklabel.8; program. With &man.bsdlabel.8; a number of obsolete options and parameters have been retired; in the example above the option should be removed. For more information, please refer to the &man.bsdlabel.8; manual page. The utility &man.mdconfig.8; is very useful, however it asks many command lines to create a file-backed file system. FreeBSD 5.0 also comes with a tool called &man.mdmfs.8;, this program configures a &man.md.4; disk using &man.mdconfig.8;, puts a UFS file system on it using &man.newfs.8;, and mounts it using &man.mount.8;. For example, if you want to create and mount the same file system image as above, simply type the following: &prompt.root; dd if=/dev/zero of=newimage bs=1k count=5k 5120+0 records in 5120+0 records in 5120+0 records out &prompt.root; mdmfs -F newimage -s 5m md0 /mnt &prompt.root; df /mnt Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/md0 4846 2 4458 0% /mnt If you use the option without unit number, &man.mdmfs.8; will use &man.md.4; auto-unit feature to automatically select an unused device. For more details about &man.mdmfs.8;, please refer to the manual page. Memory-Based File System under FreeBSD 4.X disks memory file system (4.X) The &man.md.4; driver is a simple, efficient means to create memory file systems under FreeBSD 4.X. &man.malloc.9; is used to allocate the memory. Simply take a file system you have prepared with, for example, &man.vnconfig.8;, and: md Memory Disk under FreeBSD 4.X &prompt.root; dd if=newimage of=/dev/md0 5120+0 records in 5120+0 records out &prompt.root; mount /dev/md0c /mnt &prompt.root; df /mnt Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/md0c 4927 1 4532 0% /mnt For more details, please refer to &man.md.4; manual page. Memory-Based File System under FreeBSD 5.X disks memory file system (5.X) The same tools are used for memory-based and file-backed file systems: &man.mdconfig.8; or &man.mdmfs.8;. The storage for memory-based file system is allocated with &man.malloc.9;. Creating a New Memory-Based Disk with <command>mdconfig</command> &prompt.root; mdconfig -a -t malloc -s 5m -u 1 &prompt.root; newfs -U md1 /dev/md1: 5.0MB (10240 sectors) block size 16384, fragment size 2048 using 4 cylinder groups of 1.27MB, 81 blks, 256 inodes. with soft updates super-block backups (for fsck -b #) at: 32, 2624, 5216, 7808 &prompt.root; mount /dev/md1 /mnt &prompt.root; df /mnt Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/md1 4846 2 4458 0% /mnt Creating a New Memory-Based Disk with <command>mdmfs</command> &prompt.root; mdmfs -M -s 5m md2 /mnt &prompt.root; df /mnt Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/md2 4846 2 4458 0% /mnt Instead of using a &man.malloc.9; backed file system, it is possible to use swap, for that just replace with in the command line of &man.mdconfig.8;. The &man.mdmfs.8; utility by default (without ) creates a swap-based disk. For more details, please refer to &man.mdconfig.8; and &man.mdmfs.8; manual pages. Detaching a Memory Disk from the System disks detaching a memory disk When a memory-based or file-based file system is not used, you should release all resources to the system. The first thing to do is to unmount the file system, then use &man.mdconfig.8; to detach the disk from the system and release the resources. For example to detach and free all resources used by /dev/md4: &prompt.root; mdconfig -d -u 4 It is possible to list information about configured &man.md.4; devices in using the command mdconfig -l. For FreeBSD 4.X, &man.vnconfig.8; is used to detach the device. For example to detach and free all resources used by /dev/vn4: &prompt.root; vnconfig -u vn4 Tom Rhodes Contributed by File System Snapshots file systems snapshots FreeBSD 5.0 offers a new feature in conjunction with Soft Updates: File system snapshots. Snapshots allow a user to create images of specified file systems, and treat them as a file. Snapshot files must be created in the file system that the action is performed on, and a user may create no more than 20 snapshots per file system. Active snapshots are recorded in the superblock so they are persistent across unmount and remount operations along with system reboots. When a snapshot is no longer required, it can be removed with the standard &man.rm.1; command. Snapshots may be removed in any order, however all the used space may not be acquired because another snapshot will possibly claim some of the released blocks. During initial creation, the flag (see the &man.chflags.1; manual page) is set to ensure that even root cannot write to the snapshot. The &man.unlink.1; command makes an exception for snapshot files since it allows them to be removed with the flag set, so it is not necessary to clear the flag before removing a snapshot file. Snapshots are created with the &man.mount.8; command. To place a snapshot of /var in the file /var/snapshot/snap use the following command: &prompt.root; mount -u -o snapshot /var/snapshot/snap /var Once a snapshot has been created, they have several uses: Some administrators will use a snapshot file for backup purposes, because the snapshot can be transfered to CDs or tape. File integrity, &man.fsck.8; may be ran on the snapshot. Assuming that the file system was clean when it was mounted, you should always get a clean (and unchanging) result. This is essentially what the background &man.fsck.8; process does. Run the &man.dump.8; utility on the snapshot. A dump will be returned that is consistent with the file system and the timestamp of the snapshot. &man.dump.8; can also take a snapshot, create a dump image and then remove the snapshot in one command using the flag. &man.mount.8; the snapshot as a frozen image of the file system. To &man.mount.8; the snapshot /var/snapshot/snap run: &prompt.root; mdconfig -a -t vnode -f /var/snapshot/snap -u 4 &prompt.root; mount -r /dev/md4 /mnt You can now walk the hierarchy of your frozen /var file system mounted at /mnt. Everything will be in the same state it was during the snapshot creation time. The only exception is that any earlier snapshots will appear as zero length files. When the use of a snapshot has delimited, it can be unmounted with: &prompt.root; umount /mnt &prompt.root; mdconfig -d -u 4 For more information about and file system snapshots, including technical papers, you can visit Marshall Kirk McKusick's website at http://www.mckusick.com. File System Quotas accounting disk space disk quotas Quotas are an optional feature of the operating system that allow you to limit the amount of disk space and/or the number of files a user or members of a group may allocate on a per-file system basis. This is used most often on timesharing systems where it is desirable to limit the amount of resources any one user or group of users may allocate. This will prevent one user or group of users from consuming all of the available disk space. Configuring Your System to Enable Disk Quotas Before attempting to use disk quotas, it is necessary to make sure that quotas are configured in your kernel. This is done by adding the following line to your kernel configuration file: options QUOTA The stock GENERIC kernel does not have this enabled by default, so you will have to configure, build and install a custom kernel in order to use disk quotas. Please refer to for more information on kernel configuration. Next you will need to enable disk quotas in /etc/rc.conf. This is done by adding the line: enable_quotas="YES" disk quotas checking For finer control over your quota startup, there is an additional configuration variable available. Normally on bootup, the quota integrity of each file system is checked by the &man.quotacheck.8; program. The &man.quotacheck.8; facility insures that the data in the quota database properly reflects the data on the file system. This is a very time consuming process that will significantly affect the time your system takes to boot. If you would like to skip this step, a variable in /etc/rc.conf is made available for the purpose: check_quotas="NO" If you are running FreeBSD prior to 3.2-RELEASE, the configuration is simpler, and consists of only one variable. Set the following in your /etc/rc.conf: check_quotas="YES" Finally you will need to edit /etc/fstab to enable disk quotas on a per-file system basis. This is where you can either enable user or group quotas or both for all of your file systems. To enable per-user quotas on a file system, add the option to the options field in the /etc/fstab entry for the file system you want to enable quotas on. For example: /dev/da1s2g /home ufs rw,userquota 1 2 Similarly, to enable group quotas, use the option instead of . To enable both user and group quotas, change the entry as follows: /dev/da1s2g /home ufs rw,userquota,groupquota 1 2 By default, the quota files are stored in the root directory of the file system with the names quota.user and quota.group for user and group quotas respectively. See &man.fstab.5; for more information. Even though the &man.fstab.5; manual page says that you can specify an alternate location for the quota files, this is not recommended because the various quota utilities do not seem to handle this properly. At this point you should reboot your system with your new kernel. /etc/rc will automatically run the appropriate commands to create the initial quota files for all of the quotas you enabled in /etc/fstab, so there is no need to manually create any zero length quota files. In the normal course of operations you should not be required to run the &man.quotacheck.8;, &man.quotaon.8;, or &man.quotaoff.8; commands manually. However, you may want to read their manual pages just to be familiar with their operation. Setting Quota Limits disk quotas limits Once you have configured your system to enable quotas, verify that they really are enabled. An easy way to do this is to run: &prompt.root; quota -v You should see a one line summary of disk usage and current quota limits for each file system that quotas are enabled on. You are now ready to start assigning quota limits with the &man.edquota.8; command. You have several options on how to enforce limits on the amount of disk space a user or group may allocate, and how many files they may create. You may limit allocations based on disk space (block quotas) or number of files (inode quotas) or a combination of both. Each of these limits are further broken down into two categories: hard and soft limits. hard limit A hard limit may not be exceeded. Once a user reaches his hard limit he may not make any further allocations on the file system in question. For example, if the user has a hard limit of 500 blocks on a file system and is currently using 490 blocks, the user can only allocate an additional 10 blocks. Attempting to allocate an additional 11 blocks will fail. soft limit Soft limits, on the other hand, can be exceeded for a limited amount of time. This period of time is known as the grace period, which is one week by default. If a user stays over his or her soft limit longer than the grace period, the soft limit will turn into a hard limit and no further allocations will be allowed. When the user drops back below the soft limit, the grace period will be reset. The following is an example of what you might see when you run the &man.edquota.8; command. When the &man.edquota.8; command is invoked, you are placed into the editor specified by the EDITOR environment variable, or in the vi editor if the EDITOR variable is not set, to allow you to edit the quota limits. &prompt.root; edquota -u test Quotas for user test: /usr: blocks in use: 65, limits (soft = 50, hard = 75) inodes in use: 7, limits (soft = 50, hard = 60) /usr/var: blocks in use: 0, limits (soft = 50, hard = 75) inodes in use: 0, limits (soft = 50, hard = 60) You will normally see two lines for each file system that has quotas enabled. One line for the block limits, and one line for inode limits. Simply change the value you want updated to modify the quota limit. For example, to raise this user's block limit from a soft limit of 50 and a hard limit of 75 to a soft limit of 500 and a hard limit of 600, change: /usr: blocks in use: 65, limits (soft = 50, hard = 75) to: /usr: blocks in use: 65, limits (soft = 500, hard = 600) The new quota limits will be in place when you exit the editor. Sometimes it is desirable to set quota limits on a range of UIDs. This can be done by use of the option on the &man.edquota.8; command. First, assign the desired quota limit to a user, and then run edquota -p protouser startuid-enduid. For example, if user test has the desired quota limits, the following command can be used to duplicate those quota limits for UIDs 10,000 through 19,999: &prompt.root; edquota -p test 10000-19999 For more information see &man.edquota.8; manual page. Checking Quota Limits and Disk Usage disk quotas checking You can use either the &man.quota.1; or the &man.repquota.8; commands to check quota limits and disk usage. The &man.quota.1; command can be used to check individual user or group quotas and disk usage. A user may only examine his own quota, and the quota of a group he is a member of. Only the super-user may view all user and group quotas. The &man.repquota.8; command can be used to get a summary of all quotas and disk usage for file systems with quotas enabled. The following is some sample output from the quota -v command for a user that has quota limits on two file systems. Disk quotas for user test (uid 1002): Filesystem blocks quota limit grace files quota limit grace /usr 65* 50 75 5days 7 50 60 /usr/var 0 50 75 0 50 60 grace period On the /usr file system in the above example, this user is currently 15 blocks over the soft limit of 50 blocks and has 5 days of the grace period left. Note the asterisk * which indicates that the user is currently over his quota limit. Normally file systems that the user is not using any disk space on will not show up in the output from the &man.quota.1; command, even if he has a quota limit assigned for that file system. The option will display those file systems, such as the /usr/var file system in the above example. Quotas over NFS NFS Quotas are enforced by the quota subsystem on the NFS server. The &man.rpc.rquotad.8; daemon makes quota information available to the &man.quota.1; command on NFS clients, allowing users on those machines to see their quota statistics. Enable rpc.rquotad in /etc/inetd.conf like so: rquotad/1 dgram rpc/udp wait root /usr/libexec/rpc.rquotad rpc.rquotad Now restart inetd: &prompt.root; kill -HUP `cat /var/run/inetd.pid` Lucky Green Contributed by
shamrock@cypherpunks.to
 Encrypting Disk Partitions disks encrypting FreeBSD offers excellent online protections against unauthorized data access. File permissions and Mandatory Access Control (MAC) (see ) help prevent unauthorized third-parties from accessing data while the operating system is active and the computer is powered up. However, the permissions enforced by the operating system are irrelevant if an attacker has physical access to a computer and can simply move the computer's hard drive to another system to copy and analyze the sensitive data. Regardless of how an attacker may have come into possession of a hard drive or powered-down computer, GEOM Based Disk Encryption (gbde) can protect the data on the computer's file systems against even highly-motivated attackers with significant resources. Unlike cumbersome encryption methods that encrypt only individual files, gbde transparently encrypts entire file systems. No cleartext ever touches the hard drive's platter. Enabling gbde in the Kernel Become <username>root</username> Configuring gbde requires super-user privileges. &prompt.user; su - Password: Verify the Operating System Version &man.gbde.4; requires FreeBSD 5.0 or higher. &prompt.root; uname -r 5.0-RELEASE Add &man.gbde.4; Support to the Kernel Configuration File Using your favorite text editor, add the following line to your kernel configuration file: options GEOM_BDE Configure, recompile, and install the FreeBSD kernel. This process is described in . Reboot into the new kernel. Preparing the Encrypted Hard Drive The following example assumes that you are adding a new hard drive to your system that will hold a single encrypted partition. This partition will be mounted as /private. gbde can also be used to encrypt /home and /var/mail, but this requires more complex instructions which exceed the scope of this introduction. Add the New Hard Drive Install the new drive to the system as explained in . For the purposes of this example, a new hard drive partition has been added as /dev/ad4s1c. The /dev/ad0s1* devices represent existing standard FreeBSD partitions on the example system. &prompt.root; ls /dev/ad* /dev/ad0 /dev/ad0s1b /dev/ad0s1e /dev/ad4s1 /dev/ad0s1 /dev/ad0s1c /dev/ad0s1f /dev/ad4s1c /dev/ad0s1a /dev/ad0s1d /dev/ad4 Create a Directory to Hold gbde Lock Files &prompt.root; mkdir /etc/gbde The gbde lock file contains information that gbde requires to access encrypted partitions. Without access to the lock file, gbde will not be able to decrypt the data contained in the encrypted partition without significant manual intervention which is not supported by the software. Each encrypted partition uses a separate lock file. Initialize the gbde Partition A gbde partition must be initialized before it can be used. This initialization needs to be performed only once: &prompt.root; gbde init /dev/ad4s1c -i -L /etc/gbde/ad4s1c &man.gbde.8; will open your editor, permitting you to set various configuration options in a template. For use with UFS1 or UFS2, set the sector_size to 2048: $FreeBSD: src/sbin/gbde/template.txt,v 1.1 2002/10/20 11:16:13 phk Exp $ # # Sector size is the smallest unit of data which can be read or written. # Making it too small decreases performance and decreases available space. # Making it too large may prevent filesystems from working. 512 is the # minimum and always safe. For UFS, use the fragment size # sector_size = 2048 [...] &man.gbde.8; will ask you twice to type the passphrase that should be used to secure the data. The passphrase must be the same both times. gbde's ability to protect your data depends entirely on the quality of the passphrase that you choose. For tips on how to select a secure passphrase that is easy to remember, see the Diceware Passphrase website. The gbde init command creates a lock file for your gbde partition that in this example is stored as /etc/gbde/ad4s1c. gbde lock files must be backed up together with the contents of any encrypted partitions. While deleting a lock file alone cannot prevent a determined attacker from decrypting a gbde partition, without the lock file, the legitimate owner will be unable to access the data on the encrypted partition without a significant amount of work that is totally unsupported by &man.gbde.8; and its designer. Attach the Encrypted Partition to the Kernel &prompt.root; gbde attach /dev/ad4s1c -l /etc/gbde/ad4s1c You will be asked to provide the passphrase that you selected during the initialization of the encrypted partition. The new encrypted device will show up in /dev as /dev/device_name.bde: &prompt.root; ls /dev/ad* /dev/ad0 /dev/ad0s1b /dev/ad0s1e /dev/ad4s1 /dev/ad0s1 /dev/ad0s1c /dev/ad0s1f /dev/ad4s1c /dev/ad0s1a /dev/ad0s1d /dev/ad4 /dev/ad4s1c.bde Create a File System on the Encrypted Device Once the encrypted device has been attached to the kernel, you can create a file system on the device. To create a file system on the encrypted device, use &man.newfs.8;. Since it is much faster to initialize a new UFS2 file system than it is to initialize the old UFS1 file system, using &man.newfs.8; with the option is recommended. The option is the default with &os; 5.1-RELEASE and later. &prompt.root; newfs -U -O2 /dev/ad4s1c.bde The &man.newfs.8; command must be performed on an attached gbde partition which is identified by a *.bde extension to the device name. Mount the Encrypted Partition Create a mount point for the encrypted file system. &prompt.root; mkdir /private Mount the encrypted file system. &prompt.root; mount /dev/ad4s1c.bde /private Verify That the Encrypted File System is Available The encrypted file system should now be visible to &man.df.1; and be available for use. &prompt.user; df -H Filesystem Size Used Avail Capacity Mounted on /dev/ad0s1a 1037M 72M 883M 8% / /devfs 1.0K 1.0K 0B 100% /dev /dev/ad0s1f 8.1G 55K 7.5G 0% /home /dev/ad0s1e 1037M 1.1M 953M 0% /tmp /dev/ad0s1d 6.1G 1.9G 3.7G 35% /usr /dev/ad4s1c.bde 150G 4.1K 138G 0% /private Mounting Existing Encrypted File Systems After each boot, any encrypted file systems must be re-attached to the kernel, checked for errors, and mounted, before the file systems can be used. The required commands must be executed as user root. Attach the gbde Partition to the Kernel &prompt.root; gbde attach /dev/ad4s1c -l /etc/gbde/ad4s1c You will be asked to provide the passphrase that you selected during initialization of the encrypted gbde partition. Check the File System for Errors Since encrypted file systems cannot yet be listed in /etc/fstab for automatic mounting, the file systems must be checked for errors by running &man.fsck.8; manually before mounting. &prompt.root; fsck -p -t ffs /dev/ad4s1c.bde Mount the Encrypted File System &prompt.root; mount /dev/ad4s1c.bde /private The encrypted file system is now available for use. Automatically Mounting Encrypted Partitions It is possible to create a script to automatically attach, check, and mount an encrypted partition, but for security reasons the script should not contain the &man.gbde.8; password. Instead, it is recommended that such scripts be run manually while providing the password via the console or &man.ssh.1;. Cryptographic Protections Employed by gbde &man.gbde.8; encrypts the sector payload using 128-bit AES in CBC mode. Each sector on the disk is encrypted with a different AES key. For more information on gbde's cryptographic design, including how the sector keys are derived from the user-supplied passphrase, see &man.gbde.4;. Compatibility Issues &man.sysinstall.8; is incompatible with gbde-encrypted devices. All *.bde devices must be detached from the kernel before starting &man.sysinstall.8; or it will crash during its initial probing for devices. To detach the encrypted device used in our example, use the following command: &prompt.root; gbde detach /dev/ad4s1c Also note that, as &man.vinum.4; does not use the &man.geom.4; subsystem, you cannot use gbde with vinum volumes.