Index: head/en_US.ISO8859-1/books/faq/book.xml =================================================================== --- head/en_US.ISO8859-1/books/faq/book.xml (revision 51551) +++ head/en_US.ISO8859-1/books/faq/book.xml (revision 51552) @@ -1,7470 +1,7470 @@ 12-CURRENT"> X"> head/"> X"> 11-STABLE"> stable/11/"> X"> 10-STABLE"> stable/10/"> ]> Frequently Asked Questions for &os; &rel2.relx; and &rel.relx; The &os; Documentation Project 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 The &os; Documentation Project &legalnotice; &tm-attrib.freebsd; &tm-attrib.adobe; &tm-attrib.ibm; &tm-attrib.ieee; &tm-attrib.intel; &tm-attrib.linux; &tm-attrib.microsoft; &tm-attrib.netbsd; &tm-attrib.opengroup; &tm-attrib.sgi; &tm-attrib.sun; &tm-attrib.general; $FreeBSD$ This is the Frequently Asked Questions (FAQ) for &os; versions &rel2.relx; and &rel.relx;. Every effort has been made to make this FAQ as informative as possible; if you have any suggestions as to how it may be improved, send them to the &a.doc;. The latest version of this document is always available from the &os; website. It may also be downloaded as one large HTML file with HTTP or as a variety of other formats from the &os; FTP server. Introduction What is &os;? &os; is a modern operating system for desktops, laptops, servers, and embedded systems with support for a large number of platforms. It is based on U.C. Berkeley's 4.4BSD-Lite release, with some 4.4BSD-Lite2 enhancements. It is also based indirectly on William Jolitz's port of U.C. Berkeley's Net/2 to the &i386;, known as 386BSD, though very little of the 386BSD code remains. &os; is used by companies, Internet Service Providers, researchers, computer professionals, students and home users all over the world in their work, education and recreation. For more detailed information on &os;, refer to the &os; Handbook. What is the goal of the &os; Project? The goal of the &os; Project is to provide a stable and fast general purpose operating system that may be used for any purpose without strings attached. Does the &os; license have any restrictions? Yes. Those restrictions do not control how the code is used, but how to treat the &os; Project itself. The license itself is available at license and can be summarized like this: Do not claim that you wrote this. Do not sue us if it breaks. Do not remove or modify the license. Many of us have a significant investment in the project and would certainly not mind a little financial compensation now and then, but we definitely do not insist on it. We believe that our first and foremost mission is to provide code to any and all comers, and for whatever purpose, so that the code gets the widest possible use and provides the widest possible benefit. This, we believe, is one of the most fundamental goals of Free Software and one that we enthusiastically support. Code in our source tree which falls under the GNU General Public License (GPL) or GNU Library General Public License (LGPL) comes with slightly more strings attached, though at least on the side of enforced access rather than the usual opposite. Due to the additional complexities that can evolve in the commercial use of GPL software, we do, however, endeavor to replace such software with submissions under the more relaxed &os; license whenever possible. Can &os; replace my current operating system? For most people, yes. But this question is not quite that cut-and-dried. Most people do not actually use an operating system. They use applications. The applications are what really use the operating system. &os; is designed to provide a robust and full-featured environment for applications. It supports a wide variety of web browsers, office suites, email readers, graphics programs, programming environments, network servers, and much more. Most of these applications can be managed through the Ports Collection. If an application is only available on one operating system, that operating system cannot just be replaced. Chances are, there is a very similar application on &os;, however. As a solid office or Internet server or a reliable workstation, &os; will almost certainly do everything you need. Many computer users across the world, including both novices and experienced &unix; administrators, use &os; as their only desktop operating system. Users migrating to &os; from another &unix;-like environment will find &os; to be similar. &windows; and &macos; users may be interested in instead using TrueOS, a &os;-based desktop distribution. Non-&unix; users should expect to invest some additional time learning the &unix; way of doing things. This FAQ and the &os; Handbook are excellent places to start. Why is it called &os;? It may be used free of charge, even by commercial users. Full source for the operating system is freely available, and the minimum possible restrictions have been placed upon its use, distribution and incorporation into other work (commercial or non-commercial). Anyone who has an improvement or bug fix is free to submit their code and have it added to the source tree (subject to one or two obvious provisions). It is worth pointing out that the word free is being used in two ways here: one meaning at no cost and the other meaning do whatever you like. Apart from one or two things you cannot do with the &os; code, for example pretending you wrote it, you can really do whatever you like with it. What are the differences between &os; and NetBSD, OpenBSD, and other open source BSD operating systems? James Howard wrote a good explanation of the history and differences between the various projects, called The BSD Family Tree which goes a fair way to answering this question. Some of the information is out of date, but the history portion in particular remains accurate. Most of the BSDs share patches and code, even today. All of the BSDs have common ancestry. The design goals of &os; are described in , above. The design goals of the other most popular BSDs may be summarized as follows: OpenBSD aims for operating system security above all else. The OpenBSD team wrote &man.ssh.1; and &man.pf.4;, which have both been ported to &os;. NetBSD aims to be easily ported to other hardware platforms. DragonFly BSD is a fork of &os; 4.8 that has since developed many interesting features of its own, including the HAMMER file system and support for user-mode vkernels. What is the latest version of &os;? At any point in the development of &os;, there can be multiple parallel branches. &rel.relx; releases are made from the &rel.stable; branch, and &rel2.relx; releases are made from the &rel2.stable; branch. Up until the release of 9.0, the &rel2.relx; series was the one known as -STABLE. However, as of &rel.head.relx;, the &rel2.relx; branch will be designated for an extended support status and receive only fixes for major problems, such as security-related fixes. Version &rel.current; is the latest release from the &rel.stable; branch; it was released in &rel.current.date;. Version &rel2.current; is the latest release from the &rel2.stable; branch; it was released in &rel2.current.date;. Releases are made every few months. While many people stay more up-to-date with the &os; sources (see the questions on &os.current; and &os.stable;) than that, doing so is more of a commitment, as the sources are a moving target. More information on &os; releases can be found on the Release Engineering page and in &man.release.7;. What is &os;-CURRENT? &os.current; is the development version of the operating system, which will in due course become the new &os.stable; branch. As such, it is really only of interest to developers working on the system and die-hard hobbyists. See the relevant section in the Handbook for details on running -CURRENT. Users not familiar with &os; should not use &os.current;. This branch sometimes evolves quite quickly and due to mistake can be un-buildable at times. People that use &os.current; are expected to be able to analyze, debug, and report problems. &os; snapshot releases are made based on the current state of the -CURRENT and -STABLE branches. The goals behind each snapshot release are: To test the latest version of the installation software. To give people who would like to run -CURRENT or -STABLE but who do not have the time or bandwidth to follow it on a day-to-day basis an easy way of bootstrapping it onto their systems. To preserve a fixed reference point for the code in question, just in case we break something really badly later. (Although Subversion normally prevents anything horrible like this happening.) To ensure that all new features and fixes in need of testing have the greatest possible number of potential testers. No claims are made that any -CURRENT snapshot can be considered production quality for any purpose. If a stable and fully tested system is needed, stick to full releases. Snapshot releases are directly available from snapshot. Official snapshots are generated on a regular basis for all actively developed branches. What is the &os;-STABLE concept? Back when &os; 2.0.5 was released, &os; development branched in two. One branch was named -STABLE, one -CURRENT. &os;-STABLE is the development branch from which major releases are made. Changes go into this branch at a slower pace and with the general assumption that they have first been tested in &os;-CURRENT. However, at any given time, the sources for &os;-STABLE may or may not be suitable for general use, as it may uncover bugs and corner cases that were not yet found in &os;-CURRENT. Users who do not have the resources to perform testing should instead run the most recent release of &os;. &os;-CURRENT, on the other hand, has been one unbroken line since 2.0 was released, leading towards &rel.current;-RELEASE and beyond. For more detailed information on branches see &os; Release Engineering: Creating the Release Branch, the status of the branches and the upcoming release schedule can be found on the Release Engineering Information page. &rel.current;-STABLE is the actively developed -STABLE branch. The latest release on the &rel.current;-STABLE branch is &rel.current;-RELEASE, which was released in &rel.current.date;. The &rel.head; branch is the actively developed -CURRENT branch toward the next generation of &os;. See What is &os;-CURRENT? for more information on this branch. When are &os; releases made? The &a.re; releases a new major version of &os; about every 18 months and a new minor version about every 8 months, on average. Release dates are announced well in advance, so that the people working on the system know when their projects need to be finished and tested. A testing period precedes each release, to ensure that the addition of new features does not compromise the stability of the release. Many users regard this caution as one of the best things about &os;, even though waiting for all the latest goodies to reach -STABLE can be a little frustrating. More information on the release engineering process (including a schedule of upcoming releases) can be found on the release engineering pages on the &os; Web site. For people who need or want a little more excitement, binary snapshots are made weekly as discussed above. Who is responsible for &os;? The key decisions concerning the &os; project, such as the overall direction of the project and who is allowed to add code to the source tree, are made by a core team of 9 people. There is a much larger team of more than 350 committers who are authorized to make changes directly to the &os; source tree. However, most non-trivial changes are discussed in advance in the mailing lists, and there are no restrictions on who may take part in the discussion. Where can I get &os;? Every significant release of &os; is available via anonymous FTP from the &os; FTP site: The latest &rel.stable; release, &rel.current;-RELEASE can be found in the &rel.current;-RELEASE directory. Snapshot releases are made monthly for the -CURRENT and -STABLE branch, these being of service purely to bleeding-edge testers and developers. The latest &rel2.stable; release, &rel2.current;-RELEASE can be found in the &rel2.current;-RELEASE directory. Information about obtaining &os; on CD, DVD, and other media can be found in the Handbook. How do I access the Problem Report database? The Problem Report database of all user change requests may be queried by using our web-based PR query interface. The web-based problem report submission interface can be used to submit problem reports through a web browser. Before submitting a problem report, read Writing &os; Problem Reports, an article on how to write good problem reports. Documentation and Support What good books are there about &os;? The project produces a wide range of documentation, available online from this link: https://www.FreeBSD.org/docs.html. In addition, the Bibliography at the end of this FAQ, and the one in the Handbook reference other recommended books. Is the documentation available in other formats, such as plain text (ASCII), or &postscript;? Yes. The documentation is available in a number of different formats and compression schemes on the &os; FTP site, in the /pub/FreeBSD/doc/ directory. The documentation is categorized in a number of different ways. These include: The document's name, such as faq, or handbook. The document's language and encoding. These are based on the locale names found under /usr/share/locale on a &os; system. The current languages and encodings are as follows: Name Meaning en_US.ISO8859-1 English (United States) bn_BD.ISO10646-1 Bengali or Bangla (Bangladesh) da_DK.ISO8859-1 Danish (Denmark) de_DE.ISO8859-1 German (Germany) el_GR.ISO8859-7 Greek (Greece) es_ES.ISO8859-1 Spanish (Spain) fr_FR.ISO8859-1 French (France) hu_HU.ISO8859-2 Hungarian (Hungary) it_IT.ISO8859-15 Italian (Italy) ja_JP.eucJP Japanese (Japan, EUC encoding) mn_MN.UTF-8 Mongolian (Mongolia, UTF-8 encoding) nl_NL.ISO8859-1 Dutch (Netherlands) no_NO.ISO8859-1 Norwegian (Norway) pl_PL.ISO8859-2 Polish (Poland) pt_BR.ISO8859-1 Portuguese (Brazil) ru_RU.KOI8-R Russian (Russia, KOI8-R encoding) sr_YU.ISO8859-2 Serbian (Serbia) tr_TR.ISO8859-9 Turkish (Turkey) zh_CN.UTF-8 Simplified Chinese (China, UTF-8 encoding) zh_TW.UTF-8 Traditional Chinese (Taiwan, UTF-8 encoding) Some documents may not be available in all languages. The document's format. We produce the documentation in a number of different output formats. Each format has its own advantages and disadvantages. Some formats are better suited for online reading, while others are meant to be aesthetically pleasing when printed on paper. Having the documentation available in any of these formats ensures that our readers will be able to read the parts they are interested in, either on their monitor, or on paper after printing the documents. The currently available formats are: Format Meaning html-split A collection of small, linked, HTML files. html One large HTML file containing the entire document pdf Adobe's Portable Document Format ps &postscript; rtf µsoft;'s Rich Text Format txt Plain text Page numbers are not automatically updated when loading Rich Text Format into Word. Press CtrlA, CtrlEnd, F9 after loading the document, to update the page numbers. The compression and packaging scheme. Where the format is html-split, the files are bundled up using &man.tar.1;. The resulting .tar file is then compressed using the compression schemes detailed in the next point. All the other formats generate one file. For example, article.pdf, book.html, and so on. These files are then compressed using either the zip or bz2 compression schemes. &man.tar.1; can be used to uncompress these files. So the &postscript; version of the Handbook, compressed using bzip2 will be stored in a file called book.ps.bz2 in the handbook/ directory. After choosing the format and compression mechanism, download the compressed files, uncompress them, and then copy the appropriate documents into place. For example, the split HTML version of the FAQ, compressed using &man.bzip2.1;, can be found in doc/en_US.ISO8859-1/books/faq/book.html-split.tar.bz2 To download and uncompress that file, type: &prompt.root; fetch https://download.freebsd.org/ftp/doc/en_US.ISO8859-1/books/faq/book.html-split.tar.bz2 &prompt.root; tar xvf book.html-split.tar.bz2 If the file is compressed, tar will automatically detect the appropriate format and decompress it correctly, resulting in a collection of .html files. The main one is called index.html, which will contain the table of contents, introductory material, and links to the other parts of the document. Where do I find info on the &os; mailing lists? What &os; news groups are available? Refer to the Handbook entry on mailing-lists and the Handbook entry on newsgroups. Are there &os; IRC (Internet Relay Chat) channels? Yes, most major IRC networks host a &os; chat channel: Channel #FreeBSDhelp on EFNet is a channel dedicated to helping &os; users. Channel #FreeBSD on Freenode is a general help channel with many users at any time. The conversations have been known to run off-topic for a while, but priority is given to users with &os; questions. Other users can help with the basics, referring to the Handbook whenever possible and providing links for learning more about a particular topic. This is primarily an English speaking channel, though it does have users from all over the world. Non-native English speakers should try to ask the question in English first and then relocate to ##freebsd-lang as appropriate. Channel #FreeBSD on DALNET is available at irc.dal.net in the US and irc.eu.dal.net in Europe. Channel #FreeBSD on UNDERNET is available at us.undernet.org in the US and eu.undernet.org in Europe. Since it is a help channel, be prepared to read the documents you are referred to. Channel #FreeBSD on RUSNET is a Russian language channel dedicated to helping &os; users. This is also good place for non-technical discussions. Channel #bsdchat on Freenode is a Traditional Chinese (UTF-8 encoding) language channel dedicated to helping &os; users. This is also good place for non-technical discussions. The &os; wiki has a good list of IRC channels. Each of these channels are distinct and are not connected to each other. Since their chat styles differ, try each to find one suited to your chat style. Are there any web based forums to discuss &os;? The official &os; forums are located at https://forums.FreeBSD.org/. Where can I get commercial &os; training and support? iXsystems, Inc., parent company of the &os; Mall, provides commercial &os; and TrueOS software support, in addition to &os; development and tuning solutions. BSD Certification Group, Inc. provides system administration certifications for DragonFly BSD, &os;, NetBSD, and OpenBSD. Refer to their site for more information. Any other organizations providing training and support should contact the Project to be listed here. Installation Nik Clayton
nik@FreeBSD.org
Which platform should I download? I have a 64 bit capable &intel; CPU, but I only see amd64. &arch.amd64; is the term &os; uses for 64-bit compatible x86 architectures (also known as "x86-64" or "x64"). Most modern computers should use &arch.amd64;. Older hardware should use &arch.i386;. When installing on a non-x86-compatible architecture, select the platform which best matches the hardware. Which file do I download to get &os;? On the Getting &os; page, select [iso] next to the architecture that matches the hardware. Any of the following can be used: file description disc1.iso Contains enough to install &os; and a minimal set of packages. dvd1.iso Similar to disc1.iso but with additional packages. memstick.img A bootable image sufficient for writing to a USB stick. bootonly.iso A minimal image that requires network access during installation to completely install &os;. Full instructions on this procedure and a little bit more about installation issues in general can be found in the Handbook entry on installing &os;. What do I do if the install image does not boot? This can be caused by not downloading the image in binary mode when using FTP. Some FTP clients default their transfer mode to ascii and attempt to change any end-of-line characters received to match the conventions used by the client's system. This will almost invariably corrupt the boot image. Check the SHA-256 checksum of the downloaded boot image: if it is not exactly that on the server, then the download process is suspect. When using a command line FTP client, type binary at the FTP command prompt after getting connected to the server and before starting the download of the image. Where are the instructions for installing &os;? Installation instructions can be found at Handbook entry on installing &os;. What are the minimum requirements to run &os;? &os; requires a 486 or better PC, 64 MB or more of RAM, and at least 1.1 GB of hard disk space. How can I make my own custom release or install disk? Customized &os; installation media can be created by building a custom release. Follow the instructions in the Release Engineering article. Can &windows; co-exist with &os;? If &windows; is installed first, then yes. &os;'s boot manager will then manage to boot &windows; and &os;. If &windows; is installed afterwards, it will overwrite the boot manager. If that happens, see the next section. Another operating system destroyed my Boot Manager. How do I get it back? This depends upon the boot manager. The &os; boot selection menu can be reinstalled using &man.boot0cfg.8;. For example, to restore the boot menu onto the disk ada0: &prompt.root; boot0cfg -B ada0 The non-interactive MBR bootloader can be installed using &man.gpart.8;: &prompt.root; gpart bootcode -b /boot/mbr ada0 For more complex situations, including GPT disks, see &man.gpart.8;. Do I need to install the source? In general, no. There is nothing in the base system which requires the presence of the source to operate. Some ports, like sysutils/lsof, will not build unless the source is installed. In particular, if the port builds a kernel module or directly operates on kernel structures, the source must be installed. Do I need to build a kernel? Usually not. The supplied GENERIC kernel contains the drivers an ordinary computer will need. &man.freebsd-update.8;, the &os; binary upgrade tool, cannot upgrade custom kernels, another reason to stick with the GENERIC kernel when possible. For computers with very limited RAM, such as embedded systems, it may be worthwhile to build a smaller custom kernel containing just the required drivers. Should I use DES, Blowfish, or MD5 passwords and how do I specify which form my users receive? &os; uses SHA512 by default. DES passwords are still available for backwards compatibility with operating systems that still use the less secure password format. &os; also supports the Blowfish and MD5 password formats. Which password format to use for new passwords is controlled by the passwd_format login capability in /etc/login.conf, which takes values of des, blf (if these are available) or md5. See the &man.login.conf.5; manual page for more information about login capabilities. What are the limits for FFS file systems? For FFS file systems, the largest file system is practically limited by the amount of memory required to &man.fsck.8; the file system. &man.fsck.8; requires one bit per fragment, which with the default fragment size of 4 KB equates to 32 MB of memory per TB of disk. This does mean that on architectures which limit userland processes to 2 GB (e.g., &i386;), the maximum &man.fsck.8;'able filesystem is ~60 TB. If there was not a &man.fsck.8; memory limit the maximum filesystem size would be 2 ^ 64 (blocks) * 32 KB => 16 Exa * 32 KB => 512 ZettaBytes. The maximum size of a single FFS file is approximately 2 PB with the default block size of 32 KB. Each 32 KB block can point to 4096 blocks. With triple indirect blocks, the calculation is 32 KB * 12 + 32 KB * 4096 + 32 KB * 4096^2 + 32 KB * 4096^3. Increasing the block size to 64 KB will increase the max file size by a factor of 16. Why do I get an error message, readin failed after compiling and booting a new kernel? The world and kernel are out of sync. This is not supported. Be sure to use make buildworld and make buildkernel to update the kernel. Boot the system by specifying the kernel directly at the second stage, pressing any key when the | shows up before loader is started. Is there a tool to perform post-installation configuration tasks? Yes. bsdconfig provides a nice interface to configure &os; post-installation. Hardware Compatibility General I want to get a piece of hardware for my &os; system. Which model/brand/type is best? This is discussed continually on the &os; mailing lists but is to be expected since hardware changes so quickly. Read through the Hardware Notes for &os; &rel.current; or &rel2.current; and search the mailing list archives before asking about the latest and greatest hardware. Chances are a discussion about that type of hardware took place just last week. Before purchasing a laptop, check the archives for &a.mobile; and &a.questions;, or possibly a specific mailing list for a particular hardware type. What are the limits for memory? Does &os; support more than 4 GB of memory (RAM)? More than 16 GB? More than 48 GB? &os; as an operating system generally supports as much physical memory (RAM) as the platform it is running on does. Keep in mind that different platforms have different limits for memory; for example &i386; without PAE supports at most 4 GB of memory (and usually less than that because of PCI address space) and &i386; with PAE supports at most 64 GB memory. As of &os; 10, AMD64 platforms support up to 4 TB of physical memory. Why does &os; report less than 4 GB memory when installed on an &i386; machine? The total address space on &i386; machines is 32-bit, meaning that at most 4 GB of memory is addressable (can be accessed). Furthermore, some addresses in this range are reserved by hardware for different purposes, for example for using and controlling PCI devices, for accessing video memory, and so on. Therefore, the total amount of memory usable by the operating system for its kernel and applications is limited to significantly less than 4 GB. Usually, 3.2 GB to 3.7 GB is the maximum usable physical memory in this configuration. To access more than 3.2 GB to 3.7 GB of installed memory (meaning up to 4 GB but also more than 4 GB), a special tweak called PAE must be used. PAE stands for Physical Address Extension and is a way for 32-bit x86 CPUs to address more than 4 GB of memory. It remaps the memory that would otherwise be overlaid by address reservations for hardware devices above the 4 GB range and uses it as additional physical memory (see &man.pae.4;). Using PAE has some drawbacks; this mode of memory access is a little bit slower than the normal (without PAE) mode and loadable modules (see &man.kld.4;) are not supported. This means all drivers must be compiled into the kernel. The most common way to enable PAE is to build a new kernel with the special ready-provided kernel configuration file called PAE, which is already configured to build a safe kernel. Note that some entries in this kernel configuration file are too conservative and some drivers marked as unready to be used with PAE are actually usable. A rule of thumb is that if the driver is usable on 64-bit architectures (like AMD64), it is also usable with PAE. When creating a custom kernel configuration file, PAE can be enabled by adding the following line: options PAE PAE is not much used nowadays because most new x86 hardware also supports running in 64-bit mode, known as AMD64 or &intel; 64. It has a much larger address space and does not need such tweaks. &os; supports AMD64 and it is recommended that this version of &os; be used instead of the &i386; version if 4 GB or more memory is required. Architectures and Processors Does &os; support architectures other than the x86? Yes. &os; divides support into multiple tiers. Tier 1 architectures, such as i386 or amd64; are fully supported. Tiers 2 and 3 are supported on a best-effort basis. A full explanation of the tier system is available in the Committer's Guide. A complete list of supported architectures can be found on the platforms page. Does &os; support Symmetric Multiprocessing (SMP)? &os; supports symmetric multi-processor (SMP) on all non-embedded platforms (e.g, &arch.i386;, &arch.amd64;, etc.). SMP is also supported in arm and MIPS kernels, although some CPUs may not support this. &os;'s SMP implementation uses fine-grained locking, and performance scales nearly linearly with number of CPUs. &man.smp.4; has more details. What is microcode? How do I install &intel; CPU microcode updates? Microcode is a method of programmatically implementing hardware level instructions. This allows for CPU bugs to be fixed without replacing the on board chip. Install sysutils/devcpu-data, then add: microcode_update_enable="YES" to /etc/rc.conf Hard Drives, Tape Drives, and CD and DVD Drives What kind of hard drives does &os; support? &os; supports EIDE, SATA, SCSI, and SAS drives (with a compatible controller; see the next section), and all drives using the original Western Digital interface (MFM, RLL, ESDI, and of course IDE). A few ESDI controllers that use proprietary interfaces may not work: stick to WD1002/3/6/7 interfaces and clones. Which SCSI or SAS controllers are supported? See the complete list in the Hardware Notes for &os; &rel.current; or &rel2.current;. What types of tape drives are supported? &os; supports all standard SCSI tape interfaces. Does &os; support tape changers? &os; supports SCSI changers using the &man.ch.4; device and the &man.chio.1; command. The details of how to control the changer can be found in &man.chio.1;. While AMANDA and some other products already understands changers, other applications only know how to move a tape from one point to another. In this case, keep track of which slot a tape is in and which slot the tape currently in the drive needs to go back to. Which CD-ROM and CD-RW drives are supported by &os;? Any SCSI drive connected to a supported controller is supported. Most ATAPI compatible IDE CD-ROMs are supported. &os; supports any ATAPI-compatible IDE CD-R or CD-RW drive. &os; also supports any SCSI CD-R or CD-RW drives. Install the sysutils/cdrtools port or package, then use cdrecord. Keyboards and Mice Is it possible to use a mouse outside the X Window system? The default console driver, &man.syscons.4;, provides the ability to use a mouse pointer in text consoles to cut & paste text. Run the mouse daemon, &man.moused.8;, and turn on the mouse pointer in the virtual console: &prompt.root; moused -p /dev/xxxx -t yyyy &prompt.root; vidcontrol -m on Where xxxx is the mouse device name and yyyy is a protocol type for the mouse. The mouse daemon can automatically determine the protocol type of most mice, except old serial mice. Specify the auto protocol to invoke automatic detection. If automatic detection does not work, see the &man.moused.8; manual page for a list of supported protocol types. For a PS/2 mouse, add moused_enable="YES" to /etc/rc.conf to start the mouse daemon at boot time. Additionally, to use the mouse daemon on all virtual terminals instead of just the console, add allscreens_flags="-m on" to /etc/rc.conf. When the mouse daemon is running, access to the mouse must be coordinated between the mouse daemon and other programs such as X Windows. Refer to the FAQ Why does my mouse not work with X? for more details on this issue. How do I cut and paste text with a mouse in the text console? It is not possible to remove data using the mouse. However, it is possible to copy and paste. Once the mouse daemon is running as described in the previous question, hold down button 1 (left button) and move the mouse to select a region of text. Then, press button 2 (middle button) to paste it at the text cursor. Pressing button 3 (right button) will extend the selected region of text. If the mouse does not have a middle button, it is possible to emulate one or remap buttons using mouse daemon options. See the &man.moused.8; manual page for details. My mouse has a fancy wheel and buttons. Can I use them in &os;? The answer is, unfortunately, It depends. These mice with additional features require specialized driver in most cases. Unless the mouse device driver or the user program has specific support for the mouse, it will act just like a standard two, or three button mouse. For the possible usage of wheels in the X Window environment, refer to that section. How do I use my delete key in sh and csh? For the Bourne Shell, add the following lines to ~/.shrc. See &man.sh.1; and &man.editrc.5;. bind ^? ed-delete-next-char # for console bind ^[[3~ ed-delete-next-char # for xterm For the C Shell, add the following lines to ~/.cshrc. See &man.csh.1;. bindkey ^? delete-char # for console bindkey ^[[3~ delete-char # for xterm For more information, see this page. Other Hardware Workarounds for no sound from my &man.pcm.4; sound card? Some sound cards set their output volume to 0 at every boot. Run the following command every time the machine boots: &prompt.root; mixer pcm 100 vol 100 cd 100 Does &os; support power management on my laptop? &os; supports the ACPI features found in modern hardware. Further information can be found in &man.acpi.4;. Troubleshooting Why is &os; finding the wrong amount of memory on &i386; hardware? The most likely reason is the difference between physical memory addresses and virtual addresses. The convention for most PC hardware is to use the memory area between 3.5 GB and 4 GB for a special purpose (usually for PCI). This address space is used to access PCI hardware. As a result real, physical memory cannot be accessed by that address space. What happens to the memory that should appear in that location is hardware dependent. Unfortunately, some hardware does nothing and the ability to use that last 500 MB of RAM is entirely lost. Luckily, most hardware remaps the memory to a higher location so that it can still be used. However, this can cause some confusion when watching the boot messages. On a 32-bit version of &os;, the memory appears lost, since it will be remapped above 4 GB, which a 32-bit kernel is unable to access. In this case, the solution is to build a PAE enabled kernel. See the entry on memory limits for more information. On a 64-bit version of &os;, or when running a PAE-enabled kernel, &os; will correctly detect and remap the memory so it is usable. During boot, however, it may seem as if &os; is detecting more memory than the system really has, due to the described remapping. This is normal and the available memory will be corrected as the boot process completes. Why do my programs occasionally die with Signal 11 errors? Signal 11 errors are caused when a process has attempted to access memory which the operating system has not granted it access to. If something like this is happening at seemingly random intervals, start investigating the cause. These problems can usually be attributed to either: If the problem is occurring only in a specific custom application, it is probably a bug in the code. If it is a problem with part of the base &os; system, it may also be buggy code, but more often than not these problems are found and fixed long before us general FAQ readers get to use these bits of code (that is what -CURRENT is for). It is probably not a &os; bug if the problem occurs compiling a program, but the activity that the compiler is carrying out changes each time. For example, if make buildworld fails while trying to compile ls.c into ls.o and, when run again, it fails in the same place, this is a broken build. Try updating source and try again. If the compile fails elsewhere, it is almost certainly due to hardware. In the first case, use a debugger such as &man.gdb.1; to find the point in the program which is attempting to access a bogus address and fix it. In the second case, verify which piece of hardware is at fault. Common causes of this include: The hard disks might be overheating: Check that the fans are still working, as the disk and other hardware might be overheating. The processor running is overheating: This might be because the processor has been overclocked, or the fan on the processor might have died. In either case, ensure that the hardware is running at what it is specified to run at, at least while trying to solve this problem. If it is not, clock it back to the default settings.) Regarding overclocking, it is far cheaper to have a slow system than a fried system that needs replacing! Also the community is not sympathetic to problems on overclocked systems. Dodgy memory: if multiple memory SIMMS/DIMMS are installed, pull them all out and try running the machine with each SIMM or DIMM individually to narrow the problem down to either the problematic DIMM/SIMM or perhaps even a combination. Over-optimistic motherboard settings: the BIOS settings, and some motherboard jumpers, provide options to set various timings. The defaults are often sufficient, but sometimes setting the wait states on RAM too low, or setting the RAM Speed: Turbo option will cause strange behavior. A possible idea is to set to BIOS defaults, after noting the current settings first. Unclean or insufficient power to the motherboard. Remove any unused I/O boards, hard disks, or CD-ROMs, or disconnect the power cable from them, to see if the power supply can manage a smaller load. Or try another power supply, preferably one with a little more power. For instance, if the current power supply is rated at 250 Watts, try one rated at 300 Watts. Read the section on Signal 11 for a further explanation and a discussion on how memory testing software or hardware can still pass faulty memory. There is an extensive FAQ on this at the SIG11 problem FAQ. Finally, if none of this has helped, it is possibly a bug in &os;. Follow these instructions to send a problem report. My system crashes with either Fatal trap 12: page fault in kernel mode, or panic:, and spits out a bunch of information. What should I do? The &os; developers are interested in these errors, but need more information than just the error message. Copy the full crash message. Then consult the FAQ section on kernel panics, build a debugging kernel, and get a backtrace. This might sound difficult, but does not require any programming skills. Just follow the instructions. What is the meaning of the error maxproc limit exceeded by uid %i, please see tuning(7) and login.conf(5)? The &os; kernel will only allow a certain number of processes to exist at one time. The number is based on the kern.maxusers &man.sysctl.8; variable. kern.maxusers also affects various other in-kernel limits, such as network buffers. If the machine is heavily loaded, increase kern.maxusers. This will increase these other system limits in addition to the maximum number of processes. To adjust the kern.maxusers value, see the File/Process Limits section of the Handbook. While that section refers to open files, the same limits apply to processes. If the machine is lightly loaded but running a very large number of processes, adjust the kern.maxproc tunable by defining it in /boot/loader.conf. The tunable will not get adjusted until the system is rebooted. For more information about tuning tunables, see &man.loader.conf.5;. If these processes are being run by a single user, adjust kern.maxprocperuid to be one less than the new kern.maxproc value. It must be at least one less because one system program, &man.init.8;, must always be running. Why do full screen applications on remote machines misbehave? The remote machine may be setting the terminal type to something other than xterm which is required by the &os; console. Alternatively the kernel may have the wrong values for the width and height of the terminal. Check the value of the TERM environment variable is xterm. If the remote machine does not support that try vt100. Run stty -a to check what the kernel thinks the terminal dimensions are. If they are incorrect, they can be changed by running stty rows RR cols CC. Alternatively, if the client machine has x11/xterm installed, then running resize will query the terminal for the correct dimensions and set them. Why does it take so long to connect to my computer via ssh or telnet? The symptom: there is a long delay between the time the TCP connection is established and the time when the client software asks for a password (or, in &man.telnet.1;'s case, when a login prompt appears). The problem: more likely than not, the delay is caused by the server software trying to resolve the client's IP address into a hostname. Many servers, including the Telnet and SSH servers that come with &os;, do this to store the hostname in a log file for future reference by the administrator. The remedy: if the problem occurs whenever connecting the client computer to any server, the problem is with the client. If the problem only occurs when someone connects to the server computer, the problem is with the server. If the problem is with the client, the only remedy is to fix the DNS so the server can resolve it. If this is on a local network, consider it a server problem and keep reading. If this is on the Internet, contact your ISP. If the problem is with the server on a local network, configure the server to resolve address-to-hostname queries for the local address range. See &man.hosts.5; and &man.named.8; for more information. If this is on the Internet, the problem may be that the local server's resolver is not functioning correctly. To check, try to look up another host such as www.yahoo.com. If it does not work, that is the problem. Following a fresh install of &os;, it is also possible that domain and name server information is missing from /etc/resolv.conf. This will often cause a delay in SSH, as the option UseDNS is set to yes by default in /etc/ssh/sshd_config. If this is causing the problem, either fill in the missing information in /etc/resolv.conf or set UseDNS to no in sshd_config as a temporary workaround. Why does file: table is full show up repeatedly in &man.dmesg.8;? This error message indicates that the number of available file descriptors have been exhausted on the system. Refer to the kern.maxfiles section of the Tuning Kernel Limits section of the Handbook for a discussion and solution. Why does the clock on my computer keep incorrect time? The computer has two or more clocks, and &os; has chosen to use the wrong one. Run &man.dmesg.8;, and check for lines that contain Timecounter. The one with the highest quality value that &os; chose. &prompt.root; dmesg | grep Timecounter Timecounter "i8254" frequency 1193182 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 Timecounter "TSC" frequency 2998570050 Hz quality 800 Timecounters tick every 1.000 msec Confirm this by checking the kern.timecounter.hardware &man.sysctl.3;. &prompt.root; sysctl kern.timecounter.hardware kern.timecounter.hardware: ACPI-fast It may be a broken ACPI timer. The simplest solution is to disable the ACPI timer in /boot/loader.conf: debug.acpi.disabled="timer" Or the BIOS may modify the TSC clock—perhaps to change the speed of the processor when running from batteries, or going into a power saving mode, but &os; is unaware of these adjustments, and appears to gain or lose time. In this example, the i8254 clock is also available, and can be selected by writing its name to the kern.timecounter.hardware &man.sysctl.3;. &prompt.root; sysctl kern.timecounter.hardware=i8254 kern.timecounter.hardware: TSC -> i8254 The computer should now start keeping more accurate time. To have this change automatically run at boot time, add the following line to /etc/sysctl.conf: kern.timecounter.hardware=i8254 What does the error swap_pager: indefinite wait buffer: mean? This means that a process is trying to page memory from disk, and the page attempt has hung trying to access the disk for more than 20 seconds. It might be caused by bad blocks on the disk drive, disk wiring, cables, or any other disk I/O-related hardware. If the drive itself is bad, disk errors will appear in /var/log/messages and in the output of dmesg. Otherwise, check the cables and connections. What is a lock order reversal? The &os; kernel uses a number of resource locks to arbitrate contention for certain resources. When multiple kernel threads try to obtain multiple resource locks, there's always the potential for a deadlock, where two threads have each obtained one of the locks and blocks forever waiting for the other thread to release one of the other locks. This sort of locking problem can be avoided if all threads obtain the locks in the same order. A run-time lock diagnostic system called &man.witness.4;, enabled in &os.current; and disabled by default for stable branches and releases, detects the potential for deadlocks due to locking errors, including errors caused by obtaining multiple resource locks with a different order from different parts of the kernel. The &man.witness.4; framework tries to detect this problem as it happens, and reports it by printing a message to the system console about a lock order reversal (often referred to also as LOR). It is possible to get false positives, as &man.witness.4; is conservative. A true positive report does not mean that a system is dead-locked; instead it should be understood as a warning that a deadlock could have happened here. Problematic LORs tend to get fixed quickly, so check the &a.current; before posting to it. What does Called ... with the following non-sleepable locks held mean? This means that a function that may sleep was called while a mutex (or other unsleepable) lock was held. The reason this is an error is because mutexes are not intended to be held for long periods of time; they are supposed to only be held to maintain short periods of synchronization. This programming contract allows device drivers to use mutexes to synchronize with the rest of the kernel during interrupts. Interrupts (under &os;) may not sleep. Hence it is imperative that no subsystem in the kernel block for an extended period while holding a mutex. To catch such errors, assertions may be added to the kernel that interact with the &man.witness.4; subsystem to emit a warning or fatal error (depending on the system configuration) when a potentially blocking call is made while holding a mutex. In summary, such warnings are non-fatal, however with unfortunate timing they could cause undesirable effects ranging from a minor blip in the system's responsiveness to a complete system lockup. For additional information about locking in &os; see &man.locking.9;. Why does buildworld/installworld die with the message touch: not found? This error does not mean that the &man.touch.1; utility is missing. The error is instead probably due to the dates of the files being set sometime in the future. If the CMOS clock is set to local time, run adjkerntz -i to adjust the kernel clock when booting into single-user mode. User Applications Where are all the user applications? Refer to the ports page for info on software packages ported to &os;. The list currently tops &os.numports; and is growing daily, so come back to check often or subscribe to the &a.announce; for periodic updates on new entries. Most ports should work on all supported versions of &os;. Those that do not are specifically marked as such. Each time a &os; release is made, a snapshot of the ports tree at the time of release in also included in the ports/ directory. &os; supports compressed binary packages to easily install and uninstall ports. Use &man.pkg.7; to control the installation of packages. How do I download the Ports tree? Should I be using SVN? Any of the methods listed here work: Use portsnap for most use cases. Refer to Using the Ports Collection for instructions on how to use this tool. Use SVN if custom patches to the ports tree are needed. Refer to Using Subversion for details. Does &os; support &java;? Yes. Refer to https://www.FreeBSD.org/java/ for more information. Why can I not build this port on my &rel2.relx; -, or &rel.relx; -STABLE machine? If the installed &os; version lags significantly behind -CURRENT or -STABLE, update the Ports Collection using the instructions in Using the Ports Collection. If the system is up-to-date, someone might have committed a change to the port which works for -CURRENT but which broke the port for -STABLE. Submit a bug report, since the Ports Collection is supposed to work for both the -CURRENT and -STABLE branches. I just tried to build INDEX using make index, and it failed. Why? First, make sure that the Ports Collection is up-to-date. Errors that affect building INDEX from an up-to-date copy of the Ports Collection are high-visibility and are thus almost always fixed immediately. There are rare cases where INDEX will not build due to odd cases involving OPTIONS_SET being set in make.conf. If you suspect that this is the case, try to make INDEX with those variables turned off before reporting it to &a.ports;. I updated the sources, now how do I update my installed ports? &os; does not include a port upgrading tool, but it does have some tools to make the upgrade process somewhat easier. Additional tools are available to simplify port handling and are described the Upgrading Ports section in the &os; Handbook. Do I need to recompile every port each time I perform a major version update? Yes! While a recent system will run with software compiled under an older release, things will randomly crash and fail to work once other ports are installed or updated. When the system is upgraded, various shared libraries, loadable modules, and other parts of the system will be replaced with newer versions. Applications linked against the older versions may fail to start or, in other cases, fail to function properly. For more information, see the section on upgrades in the &os; Handbook. Do I need to recompile every port each time I perform a minor version update? In general, no. &os; developers do their utmost to guarantee binary compatibility across all releases with the same major version number. Any exceptions will be documented in the Release Notes, and advice given there should be followed. Why is /bin/sh so minimal? Why does &os; not use bash or another shell? Many people need to write shell scripts which will be portable across many systems. That is why &posix; specifies the shell and utility commands in great detail. Most scripts are written in Bourne shell (&man.sh.1;), and because several important programming interfaces (&man.make.1;, &man.system.3;, &man.popen.3;, and analogues in higher-level scripting languages like Perl and Tcl) are specified to use the Bourne shell to interpret commands. Because the Bourne shell is so often and widely used, it is important for it to be quick to start, be deterministic in its behavior, and have a small memory footprint. The existing implementation is our best effort at meeting as many of these requirements simultaneously as we can. To keep /bin/sh small, we have not provided many of the convenience features that other shells have. That is why other more featureful shells like bash, scsh, &man.tcsh.1;, and zsh are available. Compare the memory utilization of these shells by looking at the VSZ and RSS columns in a ps -u listing. How do I create audio CDs from my MIDI files? To create audio CDs from MIDI files, first install audio/timidity++ from ports then install manually the GUS patches set by Eric A. Welsh, available at http://alleg.sourceforge.net/digmid.html. After TiMidity++ has been installed properly, MIDI files may be converted to WAV files with the following command line: &prompt.user; timidity -Ow -s 44100 -o /tmp/juke/01.wav 01.mid The WAV files can then be converted to other formats or burned onto audio CDs, as described in the &os; Handbook. Kernel Configuration I would like to customize my kernel. Is it difficult? Not at all! Check out the kernel config section of the Handbook. The new kernel will be installed to the /boot/kernel directory along with its modules, while the old kernel and its modules will be moved to the /boot/kernel.old directory. If a mistake is made in the configuration, simply boot the previous version of the kernel. Why is my kernel so big? GENERIC kernels shipped with &os; are compiled in debug mode. Kernels built in debug mode contain debug data in separate files that are used for debugging. &os; releases prior to 11.0 store these debug files in the same directory as the kernel itself, /boot/kernel/. In &os; 11.0 and later the debug files are stored in /usr/lib/debug/boot/kernel/. Note that there will be little or no performance loss from running a debug kernel, and it is useful to keep one around in case of a system panic. When running low on disk space, there are different options to reduce the size of /boot/kernel/ and /usr/lib/debug/. To not install the symbol files, make sure the following line exists in /etc/src.conf: WITHOUT_KERNEL_SYMBOLS=yes For more information see &man.src.conf.5;. If you want to avoid building debug files altogether, make sure that both of the following are true: This line does not exist in the kernel configuration file: makeoptions DEBUG=-g Do not run &man.config.8; with . Either of the above settings will cause the kernel to be built in debug mode. To build and install only the specified modules, list them in /etc/make.conf: MODULES_OVERRIDE= accf_http ipfw Replace accf_httpd ipfw with a list of needed modules. Only the listed modules will be built. This reduces the size of the kernel directory and decreases the amount of time needed to build the kernel. For more information, read /usr/share/examples/etc/make.conf. Unneeded devices can be removed from the kernel to further reduce the size. See for more information. To put any of these options into effect, follow the instructions to build and install the new kernel. For reference, the &os; 11 &arch.amd64; kernel (/boot/kernel/kernel) is approximately 25 MB. Why does every kernel I try to build fail to compile, even GENERIC? There are a number of possible causes for this problem: The source tree is different from the one used to build the currently running system. When attempting an upgrade, read /usr/src/UPDATING, paying particular attention to the COMMON ITEMS section at the end. The make buildkernel command did not complete successfully. The make buildkernel target relies on files generated by the make buildworld target to complete its job correctly. Even when building &os;-STABLE, it is possible that the source tree was fetched at a time when it was either being modified or it was broken. Only releases are guaranteed to be buildable, although &os;-STABLE builds fine the majority of the time. Try re-fetching the source tree and see if the problem goes away. Try using a different mirror in case the previous one is having problems. Which scheduler is in use on a running system? The name of the scheduler currently being used is directly available as the value of the kern.sched.name sysctl: &prompt.user; sysctl kern.sched.name kern.sched.name: ULE What is kern.sched.quantum? kern.sched.quantum is the maximum number of ticks a process can run without being preempted in the 4BSD scheduler. Disks, File Systems, and Boot Loaders How can I add my new hard disk to my &os; system? See the Adding Disks section in the &os; Handbook. How do I move my system over to my huge new disk? The best way is to reinstall the operating system on the new disk, then move the user data over. This is highly recommended when tracking -STABLE for more than one release or when updating a release instead of installing a new one. Install booteasy on both disks with &man.boot0cfg.8; and dual boot until you are happy with the new configuration. Skip the next paragraph to find out how to move the data after doing this. Alternatively, partition and label the new disk with either &man.sade.8; or &man.gpart.8;. If the disks are MBR-formatted, booteasy can be installed on both disks with &man.boot0cfg.8; so that the computer can dual boot to the old or new system after the copying is done. Once the new disk set up, the data cannot just be copied. Instead, use tools that understand device files and system flags, such as &man.dump.8;. Although it is recommended to move the data while in single-user mode, it is not required. When the disks are formatted with UFS, never use anything but &man.dump.8; and &man.restore.8; to move the root file system. These commands should also be used when moving a single partition to another empty partition. The sequence of steps to use dump to move the data from one UFS partitions to a new partition is: newfs the new partition. mount it on a temporary mount point. cd to that directory. dump the old partition, piping output to the new one. For example, to move /dev/ada1s1a with /mnt as the temporary mount point, type: &prompt.root; newfs /dev/ada1s1a &prompt.root; mount /dev/ada1s1a /mnt &prompt.root; cd /mnt &prompt.root; dump 0af - / | restore rf - Rearranging partitions with dump takes a bit more work. To merge a partition like /var into its parent, create the new partition large enough for both, move the parent partition as described above, then move the child partition into the empty directory that the first move created: &prompt.root; newfs /dev/ada1s1a &prompt.root; mount /dev/ada1s1a /mnt &prompt.root; cd /mnt &prompt.root; dump 0af - / | restore rf - &prompt.root; cd var &prompt.root; dump 0af - /var | restore rf - To split a directory from its parent, say putting /var on its own partition when it was not before, create both partitions, then mount the child partition on the appropriate directory in the temporary mount point, then move the old single partition: &prompt.root; newfs /dev/ada1s1a &prompt.root; newfs /dev/ada1s1d &prompt.root; mount /dev/ada1s1a /mnt &prompt.root; mkdir /mnt/var &prompt.root; mount /dev/ada1s1d /mnt/var &prompt.root; cd /mnt &prompt.root; dump 0af - / | restore rf - The &man.cpio.1; and &man.pax.1; utilities are also available for moving user data. These are known to lose file flag information, so use them with caution. Which partitions can safely use Soft Updates? I have heard that Soft Updates on / can cause problems. What about Journaled Soft Updates? Short answer: Soft Updates can usually be safely used on all partitions. Long answer: Soft Updates has two characteristics that may be undesirable on certain partitions. First, a Soft Updates partition has a small chance of losing data during a system crash. The partition will not be corrupted as the data will simply be lost. Second, Soft Updates can cause temporary space shortages. When using Soft Updates, the kernel can take up to thirty seconds to write changes to the physical disk. When a large file is deleted the file still resides on disk until the kernel actually performs the deletion. This can cause a very simple race condition. Suppose one large file is deleted and another large file is immediately created. The first large file is not yet actually removed from the physical disk, so the disk might not have enough room for the second large file. This will produce an error that the partition does not have enough space, even though a large chunk of space has just been released. A few seconds later, the file creation works as expected. If a system should crash after the kernel accepts a chunk of data for writing to disk, but before that data is actually written out, data could be lost. This risk is extremely small, but generally manageable. These issues affect all partitions using Soft Updates. So, what does this mean for the root partition? Vital information on the root partition changes very rarely. If the system crashed during the thirty-second window after such a change is made, it is possible that data could be lost. This risk is negligible for most applications, but be aware that it exists. If the system cannot tolerate this much risk, do not use Soft Updates on the root file system! / is traditionally one of the smallest partitions. If /tmp is on /, there may be intermittent space problems. Symlinking /tmp to /var/tmp will solve this problem. Finally, &man.dump.8; does not work in live mode (-L) on a filesystem, with Journaled Soft Updates (SU+J). Can I mount other foreign file systems under &os;? &os; supports a variety of other file systems. UFS UFS CD-ROMs can be mounted directly on &os;. Mounting disk partitions from Digital UNIX and other systems that support UFS may be more complex, depending on the details of the disk partitioning for the operating system in question. ext2/ext3 &os; supports ext2fs and ext3fs partitions. See &man.ext2fs.5; for more information. NTFS FUSE based NTFS support is available as a port (sysutils/fusefs-ntfs). For more information see ntfs-3g. FAT &os; includes a read-write FAT driver. For more information, see &man.mount.msdosfs.8;. ZFS &os; includes a port of &sun;'s ZFS driver. The current recommendation is to use it only on &arch.amd64; platforms with sufficient memory. For more information, see &man.zfs.8;. &os; includes the Network File System NFS and the &os; Ports Collection provides several FUSE applications to support many other file systems. How do I mount a secondary DOS partition? The secondary DOS partitions are found after all the primary partitions. For example, if E is the second DOS partition on the second SCSI drive, there will be a device file for slice 5 in /dev. To mount it: &prompt.root; mount -t msdosfs /dev/da1s5 /dos/e Is there a cryptographic file system for &os;? Yes, &man.gbde.8; and &man.geli.8;. See the Encrypting Disk Partitions section of the &os; Handbook. How do I boot &os; and &linux; using GRUB? To boot &os; using GRUB, add the following to either /boot/grub/menu.lst or /boot/grub/grub.conf, depending upon which is used by the &linux; distribution. title &os; 9.1 root (hd0,a) kernel /boot/loader Where hd0,a points to the root partition on the first disk. To specify the slice number, use something like this (hd0,2,a). By default, if the slice number is omitted, GRUB searches the first slice which has the a partition. How do I boot &os; and &linux; using BootEasy? Install LILO at the start of the &linux; boot partition instead of in the Master Boot Record. You can then boot LILO from BootEasy. This is recommended when running &windows; and &linux; as it makes it simpler to get &linux; booting again if &windows; is reinstalled. How do I change the boot prompt from ??? to something more meaningful? This cannot be accomplished with the standard boot manager without rewriting it. There are a number of other boot managers in the sysutils category of the Ports Collection. How do I use a new removable drive? If the drive already has a file system on it, use a command like this: &prompt.root; mount -t msdosfs /dev/da0s1 /mnt If the drive will only be used with &os; systems, partition it with UFS or ZFS. This will provide long filename support, improvement in performance, and stability. If the drive will be used by other operating systems, a more portable choice, such as msdosfs, is better. &prompt.root; dd if=/dev/zero of=/dev/da0 count=2 &prompt.root; gpart create -s GPT /dev/da0 &prompt.root; gpart add -t freebsd-ufs /dev/da0 Finally, create a new file system: &prompt.root; newfs /dev/da0p1 and mount it: &prompt.root; mount /dev/da0s1 /mnt It is a good idea to add a line to /etc/fstab (see &man.fstab.5;) so you can just type mount /mnt in the future: /dev/da0p1 /mnt ufs rw,noauto 0 0 Why do I get Incorrect super block when mounting a CD? The type of device to mount must be specified. This is described in the Handbook section on Using Data CDs. Why do I get Device not configured when mounting a CD? This generally means that there is no CD in the drive, or the drive is not visible on the bus. Refer to the Using Data CDs section of the Handbook for a detailed discussion of this issue. Why do all non-English characters in filenames show up as ? on my CDs when mounted in &os;? The CD probably uses the Joliet extension for storing information about files and directories. This is discussed in the Handbook section on Using Data CD-ROMs. A CD burned under &os; cannot be read under any other operating system. Why? This means a raw file was burned to the CD, rather than creating an ISO 9660 file system. Take a look at the Handbook section on Using Data CDs. How can I create an image of a data CD? This is discussed in the Handbook section on Writing Data to an ISO File System. For more on working with CD-ROMs, see the Creating CDs Section in the Storage chapter in the Handbook. Why can I not mount an audio CD? Trying to mount an audio CD will produce an error like cd9660: /dev/cd0: Invalid argument. This is because mount only works on file systems. Audio CDs do not have file systems; they just have data. Instead, use a program that reads audio CDs, such as the audio/xmcd package or port. How do I mount a multi-session CD? By default, &man.mount.8; will attempt to mount the last data track (session) of a CD. To load an earlier session, use the command line argument. Refer to &man.mount.cd9660.8; for specific examples. How do I let ordinary users mount CD-ROMs, DVDs, USB drives, and other removable media? As root set the sysctl variable vfs.usermount to 1. &prompt.root; sysctl vfs.usermount=1 To make this persist across reboots, add the line vfs.usermount=1 to /etc/sysctl.conf so that it is reset at system boot time. Users can only mount devices they have read permissions to. To allow users to mount a device permissions must be set in /etc/devfs.conf. For example, to allow users to mount the first USB drive add: # Allow all users to mount a USB drive. own /dev/da0 root:operator perm /dev/da0 0666 All users can now mount devices they could read onto a directory that they own: &prompt.user; mkdir ~/my-mount-point &prompt.user; mount -t msdosfs /dev/da0 ~/my-mount-point Unmounting the device is simple: &prompt.user; umount ~/my-mount-point Enabling vfs.usermount, however, has negative security implications. A better way to access &ms-dos; formatted media is to use the emulators/mtools package in the Ports Collection. The device name used in the previous examples must be changed according to the configuration. The du and df commands show different amounts of disk space available. What is going on? This is due to how these commands actually work. du goes through the directory tree, measures how large each file is, and presents the totals. df just asks the file system how much space it has left. They seem to be the same thing, but a file without a directory entry will affect df but not du. When a program is using a file, and the file is deleted, the file is not really removed from the file system until the program stops using it. The file is immediately deleted from the directory listing, however. As an example, consider a file large enough to affect the output of du and df. A file being viewed with more can be deleted wihout causing an error. The entry is removed from the directory so no other program or user can access it. However, du shows that it is gone as it has walked the directory tree and the file is not listed. df shows that it is still there, as the file system knows that more is still using that space. Once the more session ends, du and df will agree. This situation is common on web servers. Many people set up a &os; web server and forget to rotate the log files. The access log fills up /var. The new administrator deletes the file, but the system still complains that the partition is full. Stopping and restarting the web server program would free the file, allowing the system to release the disk space. To prevent this from happening, set up &man.newsyslog.8;. Note that Soft Updates can delay the freeing of disk space and it can take up to 30 seconds for the change to be visible. How can I add more swap space? This section of the Handbook describes how to do this. Why does &os; see my disk as smaller than the manufacturer says it is? Disk manufacturers calculate gigabytes as a billion bytes each, whereas &os; calculates them as 1,073,741,824 bytes each. This explains why, for example, &os;'s boot messages will report a disk that supposedly has 80 GB as holding 76,319 MB. Also note that &os; will (by default) reserve 8% of the disk space. How is it possible for a partition to be more than 100% full? A portion of each UFS partition (8%, by default) is reserved for use by the operating system and the root user. &man.df.1; does not count that space when calculating the Capacity column, so it can exceed 100%. Notice that the Blocks column is always greater than the sum of the Used and Avail columns, usually by a factor of 8%. For more details, look up in &man.tunefs.8;. ZFS What is the minimum amount of RAM one should have to run ZFS? A minimum of 4GB of RAM is required for comfortable usage, but individual workloads can vary widely. What is the ZIL and when does it get used? The ZIL (ZFS intent log) is a write log used to implement posix write commitment semantics across crashes. Normally writes are bundled up into transaction groups and written to disk when filled (Transaction Group Commit). However syscalls like &man.fsync.2; require a commitment that the data is written to stable storage before returning. The ZIL is needed for writes that have been acknowledged as written but which are not yet on disk as part of a transaction. The transaction groups are timestamped. In the event of a crash the last valid timestamp is found and missing data is merged in from the ZIL. Do I need a SSD for ZIL? By default, ZFS stores the ZIL in the pool with all the data. If an application has a heavy write load, storing the ZIL in a separate device that has very fast synchronous, sequential write performance can improve overall system. For other workloads, a SSD is unlikely to make much of an improvement. What is the L2ARC? The L2ARC is a read cache stored on a fast device such as an SSD. This cache is not persistent across reboots. Note that RAM is used as the first layer of cache and the L2ARC is only needed if there is insufficient RAM. L2ARC needs space in the ARC to index it. So, perversely, a working set that fits perfectly in the ARC will not fit perfectly any more if a L2ARC is used because part of the ARC is holding the L2ARC index, pushing part of the working set into the L2ARC which is slower than RAM. Is enabling deduplication advisable? Generally speaking, no. Deduplication takes up a significant amount of RAM and may slow down read and write disk access times. Unless one is storing data that is very heavily duplicated, such as virtual machine images or user backups, it is possible that deduplication will do more harm than good. Another consideration is the inability to revert deduplication status. If data is written when deduplication is enabled, disabling dedup will not cause those blocks which were deduplicated to be replicated until they are next modified. Deduplication can also lead to some unexpected situations. In particular, deleting files may become much slower. I cannot delete or create files on my ZFS pool. How can I fix this? This could happen because the pool is 100% full. ZFS requires space on the disk to write transaction metadata. To restore the pool to a usable state, truncate the file to delete: &prompt.user; truncate -s 0 unimportant-file File truncation works because a new transaction is not started, new spare blocks are created instead. On systems with additional ZFS dataset tuning, such as deduplication, the space may not be immediately available Does ZFS support TRIM for Solid State Drives? ZFS TRIM support was added to &os; 10-CURRENT with revision r240868. ZFS TRIM support was added to all &os;-STABLE branches in r252162 and r251419, respectively. ZFS TRIM is enabled by default, and can be turned off by adding this line to /etc/sysctl.conf: vfs.zfs.trim_disable=1 ZFS TRIM may not work with all configurations, such as a ZFS filesystem on a GELI-backed device. System Administration Where are the system start-up configuration files? The primary configuration file is /etc/defaults/rc.conf which is described in &man.rc.conf.5;. System startup scripts such as /etc/rc and /etc/rc.d, which are described in &man.rc.8;, include this file. Do not edit this file! Instead, to edit an entry in /etc/defaults/rc.conf, copy the line into /etc/rc.conf and change it there. For example, if to start &man.named.8;, the included DNS server: &prompt.root; echo 'named_enable="YES"' >> /etc/rc.conf To start up local services, place shell scripts in the /usr/local/etc/rc.d directory. These shell scripts should be set executable, the default file mode is 555. How do I add a user easily? Use the &man.adduser.8; command, or the &man.pw.8; command for more complicated situations. To remove the user, use the &man.rmuser.8; command or, if necessary, &man.pw.8;. Why do I keep getting messages like root: not found after editing /etc/crontab? This is normally caused by editing the system crontab. This is not the correct way to do things as the system crontab has a different format to the per-user crontabs. The system crontab has an extra field, specifying which user to run the command as. &man.cron.8; assumes this user is the first word of the command to execute. Since no such command exists, this error message is displayed. To delete the extra, incorrect crontab: &prompt.root; crontab -r Why do I get the error, you are not in the correct group to su root when I try to su to root? This is a security feature. In order to su to root, or any other account with superuser privileges, the user account must be a member of the wheel group. If this feature were not there, anybody with an account on a system who also found out root's password would be able to gain superuser level access to the system. To allow someone to su to root, put them in the wheel group using pw: &prompt.root; pw groupmod wheel -m lisa The above example will add user lisa to the group wheel. I made a mistake in rc.conf, or another startup file, and now I cannot edit it because the file system is read-only. What should I do? Restart the system using boot -s at the loader prompt to enter single-user mode. When prompted for a shell pathname, press Enter and run mount -urw / to re-mount the root file system in read/write mode. You may also need to run mount -a -t ufs to mount the file system where your favorite editor is defined. If that editor is on a network file system, either configure the network manually before mounting the network file systems, or use an editor which resides on a local file system, such as &man.ed.1;. In order to use a full screen editor such as &man.vi.1; or &man.emacs.1;, run export TERM=xterm so that these editors can load the correct data from the &man.termcap.5; database. After performing these steps, edit /etc/rc.conf to fix the syntax error. The error message displayed immediately after the kernel boot messages should indicate the number of the line in the file which is at fault. Why am I having trouble setting up my printer? See the Handbook entry on printing for troubleshooting tips. How can I correct the keyboard mappings for my system? Refer to the Handbook section on using localization, specifically the section on console setup. Why can I not get user quotas to work properly? It is possible that the kernel is not configured to use quotas. In this case, add the following line to the kernel configuration file and recompile the kernel: options QUOTA Refer to the Handbook entry on quotas for full details. Do not turn on quotas on /. Put the quota file on the file system that the quotas are to be enforced on: File System Quota file /usr /usr/admin/quotas /home /home/admin/quotas … … Does &os; support System V IPC primitives? Yes, &os; supports System V-style IPC, including shared memory, messages and semaphores, in the GENERIC kernel. With a custom kernel, support may be loaded with the sysvshm.ko, sysvsem.ko and sysvmsg.ko kernel modules, or enabled in the custom kernel by adding the following lines to the kernel configuration file: options SYSVSHM # enable shared memory options SYSVSEM # enable for semaphores options SYSVMSG # enable for messaging Recompile and install the kernel. What other mail-server software can I use instead of Sendmail? The Sendmail server is the default mail-server software for &os;, but it can be replaced with another MTA installed from the Ports Collection. Available ports include mail/exim, mail/postfix, and mail/qmail. Search the mailing lists for discussions regarding the advantages and disadvantages of the available MTAs. I have forgotten the root password! What do I do? Do not panic! Restart the system, type boot -s at the Boot: prompt to enter single-user mode. At the question about the shell to use, hit Enter which will display a &prompt.root; prompt. Enter mount -urw / to remount the root file system read/write, then run mount -a to remount all the file systems. Run passwd root to change the root password then run &man.exit.1; to continue booting. If you are still prompted to give the root password when entering the single-user mode, it means that the console has been marked as insecure in /etc/ttys. In this case, it will be required to boot from a &os; installation disk, choose the Live CD or Shell at the beginning of the install process and issue the commands mentioned above. Mount the specific partition in this case and then chroot to it. For example, replace mount -urw / with mount /dev/ada0p1 /mnt; chroot /mnt for a system on ada0p1. If the root partition cannot be mounted from single-user mode, it is possible that the partitions are encrypted and it is impossible to mount them without the access keys. For more information see the section about encrypted disks in the &os; Handbook. How do I keep ControlAltDelete from rebooting the system? When using &man.syscons.4;, the default console driver, build and install a new kernel with this line in the configuration file: options SC_DISABLE_REBOOT This can also be done by setting the following &man.sysctl.8; which does not require a reboot or kernel recompile: &prompt.root; sysctl hw.syscons.kbd_reboot=0 The above two methods are exclusive: The &man.sysctl.8; does not exist if the kernel is compiled with SC_DISABLE_REBOOT. How do I reformat DOS text files to &unix; ones? Use this &man.perl.1; command: &prompt.user; perl -i.bak -npe 's/\r\n/\n/g' file(s) where file(s) is one or more files to process. The modification is done in-place, with the original file stored with a .bak extension. Alternatively, use &man.tr.1;: &prompt.user; tr -d '\r' < dos-text-file > unix-file dos-text-file is the file containing DOS text while unix-file will contain the converted output. This can be quite a bit faster than using perl. Yet another way to reformat DOS text files is to use the converters/dosunix port from the Ports Collection. Consult its documentation about the details. How do I re-read /etc/rc.conf and re-start /etc/rc without a reboot? Go into single-user mode and then back to multi-user mode: &prompt.root; shutdown now &prompt.root; return &prompt.root; exit I tried to update my system to the latest -STABLE, but got -BETAx, -RC or -PRERELEASE! What is going on? Short answer: it is just a name. RC stands for Release Candidate. It signifies that a release is imminent. In &os;, -PRERELEASE is typically synonymous with the code freeze before a release. (For some releases, the -BETA label was used in the same way as -PRERELEASE.) Long answer: &os; derives its releases from one of two places. Major, dot-zero, releases, such as 9.0-RELEASE are branched from the head of the development stream, commonly referred to as -CURRENT. Minor releases, such as 6.3-RELEASE or 5.2-RELEASE, have been snapshots of the active -STABLE branch. Starting with 4.3-RELEASE, each release also now has its own branch which can be tracked by people requiring an extremely conservative rate of development (typically only security advisories). When a release is about to be made, the branch from which it will be derived from has to undergo a certain process. Part of this process is a code freeze. When a code freeze is initiated, the name of the branch is changed to reflect that it is about to become a release. For example, if the branch used to be called 6.2-STABLE, its name will be changed to 6.3-PRERELEASE to signify the code freeze and signify that extra pre-release testing should be happening. Bug fixes can still be committed to be part of the release. When the source code is in shape for the release the name will be changed to 6.3-RC to signify that a release is about to be made from it. Once in the RC stage, only the most critical bugs found can be fixed. Once the release (6.3-RELEASE in this example) and release branch have been made, the branch will be renamed to 6.3-STABLE. For more information on version numbers and the various Subversion branches, refer to the Release Engineering article. I tried to install a new kernel, and the &man.chflags.1; failed. How do I get around this? Short answer: the security level is greater than 0. Reboot directly to single-user mode to install the kernel. Long answer: &os; disallows changing system flags at security levels greater than 0. To check the current security level: &prompt.root; sysctl kern.securelevel The security level cannot be lowered in multi-user mode, so boot to single-user mode to install the kernel, or change the security level in /etc/rc.conf then reboot. See the &man.init.8; manual page for details on securelevel, and see /etc/defaults/rc.conf and the &man.rc.conf.5; manual page for more information on rc.conf. I cannot change the time on my system by more than one second! How do I get around this? Short answer: the system is at a security level greater than 1. Reboot directly to single-user mode to change the date. Long answer: &os; disallows changing the time by more that one second at security levels greater than 1. To check the security level: &prompt.root; sysctl kern.securelevel The security level cannot be lowered in multi-user mode. Either boot to single-user mode to change the date or change the security level in /etc/rc.conf and reboot. See the &man.init.8; manual page for details on securelevel, and see /etc/defaults/rc.conf and the &man.rc.conf.5; manual page for more information on rc.conf. Why is rpc.statd using 256 MB of memory? No, there is no memory leak, and it is not using 256 MB of memory. For convenience, rpc.statd maps an obscene amount of memory into its address space. There is nothing terribly wrong with this from a technical standpoint; it just throws off things like &man.top.1; and &man.ps.1;. &man.rpc.statd.8; maps its status file (resident on /var) into its address space; to save worrying about remapping it later when it needs to grow, it maps it with a generous size. This is very evident from the source code, where one can see that the length argument to &man.mmap.2; is 0x10000000, or one sixteenth of the address space on an IA32, or exactly 256 MB. Why can I not unset the schg file flag? The system is running a securelevel greater than 0. Lower the securelevel and try again. For more information, see the FAQ entry on securelevel and the &man.init.8; manual page. What is vnlru? vnlru flushes and frees vnodes when the system hits the kern.maxvnodes limit. This kernel thread sits mostly idle, and only activates when there is a huge amount of RAM and users are accessing tens of thousands of tiny files. What do the various memory states displayed by top mean? Active: pages recently statistically used. Inactive: pages recently statistically unused. Cache: (most often) pages that have percolated from inactive to a status where they maintain their data, but can often be immediately reused (either with their old association, or reused with a new association). There can be certain immediate transitions from active to cache state if the page is known to be clean (unmodified), but that transition is a matter of policy, depending upon the algorithm choice of the VM system maintainer. Free: pages without data content, and can be immediately used in certain circumstances where cache pages might be ineligible. Free pages can be reused at interrupt or process state. Wired: pages that are fixed into memory, usually for kernel purposes, but also sometimes for special use in processes. Pages are most often written to disk (sort of a VM sync) when they are in the inactive state, but active pages can also be synced. This depends upon the CPU tracking of the modified bit being available, and in certain situations there can be an advantage for a block of VM pages to be synced, whether they are active or inactive. In most common cases, it is best to think of the inactive queue to be a queue of relatively unused pages that might or might not be in the process of being written to disk. Cached pages are already synced, not mapped, but available for immediate process use with their old association or with a new association. Free pages are available at interrupt level, but cached or free pages can be used at process state for reuse. Cache pages are not adequately locked to be available at interrupt level. There are some other flags (e.g., busy flag or busy count) that might modify some of the described rules. How much free memory is available? There are a couple of kinds of free memory. One kind is the amount of memory immediately available without paging anything else out. That is approximately the size of cache queue + size of free queue (with a derating factor, depending upon system tuning). Another kind of free memory is the total amount of VM space. That can be complex, but is dependent upon the amount of swap space and memory. Other kinds of free memory descriptions are also possible, but it is relatively useless to define these, but rather it is important to make sure that the paging rate is kept low, and to avoid running out of swap space. What is /var/empty? /var/empty is a directory that the &man.sshd.8; program uses when performing privilege separation. The /var/empty directory is empty, owned by root and has the schg flag set. This directory should not be deleted. I just changed /etc/newsyslog.conf. How can I check if it does what I expect? To see what &man.newsyslog.8; will do, use the following: &prompt.user; newsyslog -nrvv My time is wrong, how can I change the timezone? Use &man.tzsetup.8;. The X Window System and Virtual Consoles What is the X Window System? The X Window System (commonly X11) is the most widely available windowing system capable of running on &unix; or &unix; like systems, including &os;. The X.Org Foundation administers the X protocol standards, with the current reference implementation, version 11 release &xorg.version;, so references are often shortened to X11. Many implementations are available for different architectures and operating systems. An implementation of the server-side code is properly known as an X server. I want to run &xorg;, how do I go about it? To install &xorg; do one of the following: Use the x11/xorg meta-port, which builds and installs every &xorg; component. Use x11/xorg-minimal, which builds and installs only the necessary &xorg; components. Install &xorg; from &os; packages: &prompt.root; pkg install xorg After the installation of &xorg;, follow the instructions from the X11 Configuration section of the &os; Handbook. I tried to run X, but I get a No devices detected. error when I type startx. What do I do now? The system is probably running at a raised securelevel. It is not possible to start X at a raised securelevel because X requires write access to &man.io.4;. For more information, see at the &man.init.8; manual page. There are two solutions to the problem: set the securelevel back down to zero or run &man.xdm.1; (or an alternative display manager) at boot time before the securelevel is raised. See for more information about running &man.xdm.1; at boot time. Why does my mouse not work with X? When using &man.syscons.4;, the default console driver, &os; can be configured to support a mouse pointer on each virtual screen. To avoid conflicting with X, &man.syscons.4; supports a virtual device called /dev/sysmouse. All mouse events received from the real mouse device are written to the &man.sysmouse.4; device via &man.moused.8;. To use the mouse on one or more virtual consoles, and use X, see and set up &man.moused.8;. Then edit /etc/X11/xorg.conf and make sure the following lines exist: Section "InputDevice" Option "Protocol" "SysMouse" Option "Device" "/dev/sysmouse" ..... Starting with &xorg; version 7.4, the InputDevice sections in xorg.conf are ignored in favor of autodetected devices. To restore the old behavior, add the following line to the ServerLayout or ServerFlags section: Option "AutoAddDevices" "false" Some people prefer to use /dev/mouse under X. To make this work, /dev/mouse should be linked to /dev/sysmouse (see &man.sysmouse.4;) by adding the following line to /etc/devfs.conf (see &man.devfs.conf.5;): link sysmouse mouse This link can be created by restarting &man.devfs.5; with the following command (as root): &prompt.root; service devfs restart My mouse has a fancy wheel. Can I use it in X? Yes, if X is configured for a 5 button mouse. To do this, add the lines Buttons 5 and ZAxisMapping 4 5 to the InputDevice section of /etc/X11/xorg.conf, as seen in this example: Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/sysmouse" Option "Buttons" "5" Option "ZAxisMapping" "4 5" EndSection To use the mouse in Emacs, also add the following - lines to~/.emacs: + lines to ~/.emacs: ;; wheel mouse (global-set-key [mouse-4] 'scroll-down) (global-set-key [mouse-5] 'scroll-up) My laptop has a Synaptics touchpad. Can I use it in X? Yes, after configuring a few things to make it work. In order to use the Xorg synaptics driver, first remove moused_enable from rc.conf. To enable synaptics, add the following line to /boot/loader.conf: hw.psm.synaptics_support="1" Add the following to /etc/X11/xorg.conf: Section "InputDevice" Identifier "Touchpad0" Driver "synaptics" Option "Protocol" "psm" Option "Device" "/dev/psm0" EndSection And be sure to add the following into the ServerLayout section: InputDevice "Touchpad0" "SendCoreEvents" How do I use remote X displays? For security reasons, the default setting is to not allow a machine to remotely open a window. To enable this feature, start X with the optional argument: &prompt.user; startx -listen_tcp What is a virtual console and how do I make more? Virtual consoles provide several simultaneous sessions on the same machine without doing anything complicated like setting up a network or running X. When the system starts, it will display a login prompt on the monitor after displaying all the boot messages. Type in your login name and password to start working on the first virtual console. To start another session, perhaps to look at documentation for a program or to read mail while waiting for an FTP transfer to finish, hold down Alt and press F2. This will display the login prompt for the second virtual console. To go back to the original session, press AltF1. The default &os; installation has eight virtual consoles enabled. AltF1, AltF2, AltF3, and so on will switch between these virtual consoles. To enable more of virtual consoles, edit /etc/ttys (see &man.ttys.5;) and add entries for ttyv8 to ttyvc, after the comment on Virtual terminals: # Edit the existing entry for ttyv8 in /etc/ttys and change # "off" to "on". ttyv8 "/usr/libexec/getty Pc" xterm on secure ttyv9 "/usr/libexec/getty Pc" xterm on secure ttyva "/usr/libexec/getty Pc" xterm on secure ttyvb "/usr/libexec/getty Pc" xterm on secure The more virtual terminals, the more resources that are used. This can be problematic on systems with 8 MB RAM or less. Consider changing secure to insecure. In order to run an X server, at least one virtual terminal must be left to off for it to use. This means that only eleven of the Alt-function keys can be used as virtual consoles so that one is left for the X server. For example, to run X and eleven virtual consoles, the setting for virtual terminal 12 should be: ttyvb "/usr/libexec/getty Pc" xterm off secure The easiest way to activate the virtual consoles is to reboot. How do I access the virtual consoles from X? Use CtrlAltFn to switch back to a virtual console. Press CtrlAltF1 to return to the first virtual console. Once at a text console, use AltFn to move between them. To return to the X session, switch to the virtual console running X. If X was started from the command line using startx, the X session will attach to the next unused virtual console, not the text console from which it was invoked. For eight active virtual terminals, X will run on the ninth, so use AltF9. How do I start XDM on boot? There are two schools of thought on how to start &man.xdm.1;. One school starts xdm from /etc/ttys (see &man.ttys.5;) using the supplied example, while the other runs xdm from rc.local (see &man.rc.8;) or from an X script in /usr/local/etc/rc.d. Both are equally valid, and one may work in situations where the other does not. In both cases the result is the same: X will pop up a graphical login prompt. The &man.ttys.5; method has the advantage of documenting which vty X will start on and passing the responsibility of restarting the X server on logout to &man.init.8;. The &man.rc.8; method makes it easy to kill xdm if there is a problem starting the X server. If loaded from &man.rc.8;, xdm should be started without any arguments. xdm must start after &man.getty.8; runs, or else getty and xdm will conflict, locking out the console. The best way around this is to have the script sleep 10 seconds or so then launch xdm. When starting xdm from /etc/ttys, there still is a chance of conflict between xdm and &man.getty.8;. One way to avoid this is to add the vt number in /usr/local/lib/X11/xdm/Xservers: :0 local /usr/local/bin/X vt4 The above example will direct the X server to run in /dev/ttyv3. Note the number is offset by one. The X server counts the vty from one, whereas the &os; kernel numbers the vty from zero. Why do I get Couldn't open console when I run xconsole? When X is started with startx, the permissions on /dev/console will not get changed, resulting in things like xterm -C and xconsole not working. This is because of the way console permissions are set by default. On a multi-user system, one does not necessarily want just any user to be able to write on the system console. For users who are logging directly onto a machine with a VTY, the &man.fbtab.5; file exists to solve such problems. In a nutshell, make sure an uncommented line of the form is in /etc/fbtab (see &man.fbtab.5;): /dev/ttyv0 0600 /dev/console It will ensure that whomever logs in on /dev/ttyv0 will own the console. Why does my PS/2 mouse misbehave under X? The mouse and the mouse driver may have become out of synchronization. In rare cases, the driver may also erroneously report synchronization errors: psmintr: out of sync (xxxx != yyyy) If this happens, disable the synchronization check code by setting the driver flags for the PS/2 mouse driver to 0x100. This can be easiest achieved by adding hint.psm.0.flags="0x100" to /boot/loader.conf and rebooting. How do I reverse the mouse buttons? Type xmodmap -e "pointer = 3 2 1". Add this command to ~/.xinitrc or ~/.xsession to make it happen automatically. How do I install a splash screen and where do I find them? The detailed answer for this question can be found in the Boot Time Splash Screens section of the &os; Handbook. Can I use the Windows keys on my keyboard in X? Yes. Use &man.xmodmap.1; to define which functions the keys should perform. Assuming all Windows keyboards are standard, the keycodes for these three keys are the following: 115 — Windows key, between the left-hand Ctrl and Alt keys 116 — Windows key, to the right of AltGr 117 — Menu, to the left of the right-hand Ctrl To have the left Windows key print a comma, try this. &prompt.root; xmodmap -e "keycode 115 = comma" To have the Windows key-mappings enabled automatically every time X is started, either put the xmodmap commands in ~/.xinitrc or, preferably, create a ~/.xmodmaprc and include the xmodmap options, one per line, then add the following line to ~/.xinitrc: xmodmap $HOME/.xmodmaprc For example, to map the 3 keys to be F13, F14, and F15, respectively. This would make it easy to map them to useful functions within applications or the window manager. To do this, put the following in ~/.xmodmaprc. keycode 115 = F13 keycode 116 = F14 keycode 117 = F15 For the x11-wm/fvwm2 desktop manager, one could map the keys so that F13 iconifies or de-iconifies the window the cursor is in, F14 brings the window the cursor is in to the front or, if it is already at the front, pushes it to the back, and F15 pops up the main Workplace menu even if the cursor is not on the desktop, which is useful when no part of the desktop is visible. The following entries in ~/.fvwmrc implement the aforementioned setup: Key F13 FTIWS A Iconify Key F14 FTIWS A RaiseLower Key F15 A A Menu Workplace Nop How can I get 3D hardware acceleration for &opengl;? The availability of 3D acceleration depends on the version of &xorg; and the type of video chip. For an nVidia chip, use the binary drivers provided for &os; by installing one of the following ports: The latest versions of nVidia cards are supported by the x11/nvidia-driver port. Older drivers are available as x11/nvidia-driver-### nVidia provides detailed information on which card is supported by which driver on their web site: http://www.nvidia.com/object/IO_32667.html. For Matrox G200/G400, check the x11-drivers/xf86-video-mga port. For ATI Rage 128 and Radeon see &man.ati.4x;, &man.r128.4x; and &man.radeon.4x;. Networking Where can I get information on diskless booting? Diskless booting means that the &os; box is booted over a network, and reads the necessary files from a server instead of its hard disk. For full details, see the Handbook entry on diskless booting. Can a &os; box be used as a dedicated network router? Yes. Refer to the Handbook entry on advanced networking, specifically the section on routing and gateways. Can I connect my &windows; box to the Internet via &os;? Typically, people who ask this question have two PCs at home, one with &os; and one with some version of &windows; the idea is to use the &os; box to connect to the Internet and then be able to access the Internet from the &windows; box through the &os; box. This is really just a special case of the previous question and works perfectly well. Dialup users must use and set gateway_enable to YES in /etc/rc.conf. For more information, refer to &man.ppp.8; or the Handbook entry on user PPP. If the connection to the Internet is over Ethernet, use &man.natd.8;. A tutorial can be found in the natd section of the Handbook. Does &os; support PPP? Yes. &man.ppp.8; provides support for both incoming and outgoing connections. For more information on how to use this, refer to the Handbook chapter on PPP. Does &os; support NAT or Masquerading? Yes. For instructions on how to use NAT over a PPP connection, see the Handbook entry on PPP. To use NAT over some other sort of network connection, look at the natd section of the Handbook. How can I set up Ethernet aliases? If the alias is on the same subnet as an address already configured on the interface, add netmask 0xffffffff to this command: &prompt.root; ifconfig ed0 alias 192.0.2.2 netmask 0xffffffff Otherwise, specify the network address and netmask as usual: &prompt.root; ifconfig ed0 alias 172.16.141.5 netmask 0xffffff00 More information can be found in the &os; Handbook. Why can I not NFS-mount from a &linux; box? Some versions of the &linux; NFS code only accept mount requests from a privileged port; try to issue the following command: &prompt.root; mount -o -P linuxbox:/blah /mnt Why does mountd keep telling me it can't change attributes and that I have a bad exports list on my &os; NFS server? The most frequent problem is not understanding the correct format of /etc/exports. Review &man.exports.5; and the NFS entry in the Handbook, especially the section on configuring NFS. How do I enable IP multicast support? Install the net/mrouted package or port and add mrouted_enable="YES" to /etc/rc.conf start this service at boot time. Why do I have to use the FQDN for hosts on my site? See the answer in the &os; Handbook. Why do I get an error, Permission denied, for all networking operations? If the kernel is compiled with the IPFIREWALL option, be aware that the default policy is to deny all packets that are not explicitly allowed. If the firewall is unintentionally misconfigured, restore network operability by typing the following as root: &prompt.root; ipfw add 65534 allow all from any to any Consider setting firewall_type="open" in /etc/rc.conf. For further information on configuring this firewall, see the Handbook chapter. Why is my ipfw fwd rule to redirect a service to another machine not working? Possibly because network address translation (NAT) is needed instead of just forwarding packets. A fwd rule only forwards packets, it does not actually change the data inside the packet. Consider this rule: 01000 fwd 10.0.0.1 from any to foo 21 When a packet with a destination address of foo arrives at the machine with this rule, the packet is forwarded to 10.0.0.1, but it still has the destination address of foo. The destination address of the packet is not changed to 10.0.0.1. Most machines would probably drop a packet that they receive with a destination address that is not their own. Therefore, using a fwd rule does not often work the way the user expects. This behavior is a feature and not a bug. See the FAQ about redirecting services, the &man.natd.8; manual, or one of the several port redirecting utilities in the Ports Collection for a correct way to do this. How can I redirect service requests from one machine to another? FTP and other service requests can be redirected with the sysutils/socket package or port. Replace the entry for the service in /etc/inetd.conf to call socket, as seen in this example for ftpd: ftp stream tcp nowait nobody /usr/local/bin/socket socket ftp.example.com ftp where ftp.example.com and ftp are the host and port to redirect to, respectively. Where can I get a bandwidth management tool? There are three bandwidth management tools available for &os;. &man.dummynet.4; is integrated into &os; as part of &man.ipfw.4;. ALTQ has been integrated into &os; as part of &man.pf.4;. Bandwidth Manager from Emerging Technologies is a commercial product. Why do I get /dev/bpf0: device not configured? The running application requires the Berkeley Packet Filter (&man.bpf.4;), but it was removed from a custom kernel. Add this to the kernel config file and build a new kernel: device bpf # Berkeley Packet Filter How do I mount a disk from a &windows; machine that is on my network, like smbmount in &linux;? Use the SMBFS toolset. It includes a set of kernel modifications and a set of userland programs. The programs and information are available as &man.mount.smbfs.8; in the base system. What are these messages about: Limiting icmp/open port/closed port response in my log files? This kernel message indicates that some activity is provoking it to send a large amount of ICMP or TCP reset (RST) responses. ICMP responses are often generated as a result of attempted connections to unused UDP ports. TCP resets are generated as a result of attempted connections to unopened TCP ports. Among others, these are the kinds of activities which may cause these messages: Brute-force denial of service (DoS) attacks (as opposed to single-packet attacks which exploit a specific vulnerability). Port scans which attempt to connect to a large number of ports (as opposed to only trying a few well-known ports). The first number in the message indicates how many packets the kernel would have sent if the limit was not in place, and the second indicates the limit. This limit is controlled using net.inet.icmp.icmplim. This example sets the limit to 300 packets per second: &prompt.root; sysctl net.inet.icmp.icmplim=300 To disable these messages without disabling response limiting, use net.inet.icmp.icmplim_output to disable the output: &prompt.root; sysctl net.inet.icmp.icmplim_output=0 Finally, to disable response limiting completely, set net.inet.icmp.icmplim to 0. Disabling response limiting is discouraged for the reasons listed above. What are these arp: unknown hardware address format error messages? This means that some device on the local Ethernet is using a MAC address in a format that &os; does not recognize. This is probably caused by someone experimenting with an Ethernet card somewhere else on the network. This is most commonly seen on cable modem networks. It is harmless, and should not affect the performance of the &os; system. Why do I keep seeing messages like: 192.168.0.10 is on fxp1 but got reply from 00:15:17:67:cf:82 on rl0, and how do I disable it? Because a packet is coming from outside the network unexpectedly. To disable them, set net.link.ether.inet.log_arp_wrong_iface to 0. Security What is a sandbox? Sandbox is a security term. It can mean two things: A process which is placed inside a set of virtual walls that are designed to prevent someone who breaks into the process from being able to break into the wider system. The process is only able to run inside the walls. Since nothing the process does in regards to executing code is supposed to be able to breach the walls, a detailed audit of its code is not needed in order to be able to say certain things about its security. The walls might be a user ID, for example. This is the definition used in the &man.security.7; and &man.named.8; man pages. Take the ntalk service, for example (see &man.inetd.8;). This service used to run as user ID root. Now it runs as user ID tty. The tty user is a sandbox designed to make it more difficult for someone who has successfully hacked into the system via ntalk from being able to hack beyond that user ID. A process which is placed inside a simulation of the machine. It means that someone who is able to break into the process may believe that he can break into the wider machine but is, in fact, only breaking into a simulation of that machine and not modifying any real data. The most common way to accomplish this is to build a simulated environment in a subdirectory and then run the processes in that directory chrooted so that / for that process is this directory, not the real / of the system). Another common use is to mount an underlying file system read-only and then create a file system layer on top of it that gives a process a seemingly writeable view into that file system. The process may believe it is able to write to those files, but only the process sees the effects — other processes in the system do not, necessarily. An attempt is made to make this sort of sandbox so transparent that the user (or hacker) does not realize that he is sitting in it. &unix; implements two core sandboxes. One is at the process level, and one is at the userid level. Every &unix; process is completely firewalled off from every other &unix; process. One process cannot modify the address space of another. A &unix; process is owned by a particular userid. If the user ID is not the root user, it serves to firewall the process off from processes owned by other users. The user ID is also used to firewall off on-disk data. What is securelevel? securelevel is a security mechanism implemented in the kernel. When the securelevel is positive, the kernel restricts certain tasks; not even the superuser (root) is allowed to do them. The securelevel mechanism limits the ability to: Unset certain file flags, such as schg (the system immutable flag). Write to kernel memory via /dev/mem and /dev/kmem. Load kernel modules. Alter firewall rules. To check the status of the securelevel on a running system: &prompt.root; sysctl -n kern.securelevel The output contains the current value of the securelevel. If it is greater than 0, at least some of the securelevel's protections are enabled. The securelevel of a running system cannot be lowered as this would defeat its purpose. If a task requires that the securelevel be non-positive, change the kern_securelevel and kern_securelevel_enable variables in /etc/rc.conf and reboot. For more information on securelevel and the specific things all the levels do, consult &man.init.8;. Securelevel is not a silver bullet; it has many known deficiencies. More often than not, it provides a false sense of security. One of its biggest problems is that in order for it to be at all effective, all files used in the boot process up until the securelevel is set must be protected. If an attacker can get the system to execute their code prior to the securelevel being set (which happens quite late in the boot process since some things the system must do at start-up cannot be done at an elevated securelevel), its protections are invalidated. While this task of protecting all files used in the boot process is not technically impossible, if it is achieved, system maintenance will become a nightmare since one would have to take the system down, at least to single-user mode, to modify a configuration file. This point and others are often discussed on the mailing lists, particularly the &a.security;. Search the archives here for an extensive discussion. A more fine-grained mechanism is preferred. BIND9 (named) is listening on some high-numbered ports. What is going on? BIND uses a random high-numbered port for outgoing queries. Recent versions of it choose a new, random UDP port for each query. This may cause problems for some network configurations, especially if a firewall blocks incoming UDP packets on particular ports. To get past that firewall, try the avoid-v4-udp-ports and avoid-v6-udp-ports options to avoid selecting random port numbers within a blocked range. If a port number (like 53) is specified via the query-source or query-source-v6 options in /usr/local/etc/namedb/named.conf, randomized port selection will not be used. It is strongly recommended that these options not be used to specify fixed port numbers. Congratulations, by the way. It is good practice to read &man.sockstat.1; output and notice odd things! The Sendmail daemon is listening on port 587 as well as the standard port 25! What is going on? Recent versions of Sendmail support a mail submission feature that runs over port 587. This is not yet widely supported, but is growing in popularity. What is this UID 0 toor account? Have I been compromised? Do not worry. toor is an alternative superuser account, where toor is root spelled backwards. It is intended to be used with a non-standard shell so the default shell for root does not need to change. This is important as shells which are not part of the base distribution, but are instead installed from ports or packages, are installed in /usr/local/bin which, by default, resides on a different file system. If root's shell is located in /usr/local/bin and the file system containing /usr/local/bin) is not mounted, root will not be able to log in to fix a problem and will have to reboot into single-user mode in order to enter the path to a shell. Some people use toor for day-to-day root tasks with a non-standard shell, leaving root, with a standard shell, for single-user mode or emergencies. By default, a user cannot log in using toor as it does not have a password, so log in as root and set a password for toor before using it to login. PPP I cannot make &man.ppp.8; work. What am I doing wrong? First, read &man.ppp.8; and the PPP section of the Handbook. To assist in troubleshooting, enable logging with the following command: set log Phase Chat Connect Carrier lcp ipcp ccp command This command may be typed at the &man.ppp.8; command prompt or it may be entered at the start of the default section in /etc/ppp/ppp.conf. Make sure that /etc/syslog.conf contains the lines below and the file /var/log/ppp.log exists: !ppp *.* /var/log/ppp.log A lot about what is going can be learned from the log file. Do not worry if it does not all make sense as it may make sense to someone else. Why does &man.ppp.8; hang when I run it? This is usually because the hostname will not resolve. The best way to fix this is to make sure that /etc/hosts is read first by the by ensuring that the hosts line is listed first in /etc/host.conf. Then, put an entry in /etc/hosts for the local machine. If there is no local network, change the localhost line: 127.0.0.1 foo.example.com foo localhost Otherwise, add another entry for the host. Consult the relevant manual pages for more details. When finished, verify that this command is successful: ping -c1 `hostname`. Why will &man.ppp.8; not dial in -auto mode? First, check that a default route exists. This command should display two entries: Destination Gateway Flags Refs Use Netif Expire default 10.0.0.2 UGSc 0 0 tun0 10.0.0.2 10.0.0.1 UH 0 0 tun0 If a default route is not listed, make sure that the HISADDR line has been added to /etc/ppp/ppp.conf. Another reason for the default route line being missing is that a default route has been added to /etc/rc.conf and this line is missing from /etc/ppp/ppp.conf: delete ALL If this is the case, go back to the Final System Configuration section of the Handbook. What does No route to host mean? This error is usually because the following section is missing in /etc/ppp/ppp.linkup: MYADDR: delete ALL add 0 0 HISADDR This is only necessary for a dynamic IP address or when the address of the default gateway is unknown. When using interactive mode, the following can be typed in after entering packet mode. Packet mode is indicated by the capitalized PPP in the prompt: delete ALL add 0 0 HISADDR Refer to the PPP and Dynamic IP addresses section of the Handbook for further details. Why does my connection drop after about 3 minutes? The default PPP timeout is 3 minutes. This can be adjusted with the following line: set timeout NNN where NNN is the number of seconds of inactivity before the connection is closed. If NNN is zero, the connection is never closed due to a timeout. It is possible to put this command in ppp.conf, or to type it at the prompt in interactive mode. It is also possible to adjust it on the fly while the line is active by connecting to ppp's server socket using &man.telnet.1; or &man.pppctl.8;. Refer to the &man.ppp.8; man page for further details. Why does my connection drop under heavy load? If Link Quality Reporting (LQR) is configured, it is possible that too many LQR packets are lost between the &os; system and the peer. &man.ppp.8; deduces that the line must therefore be bad, and disconnects. LQR is disabled by default and can be enabled with the following line: enable lqr Why does my connection drop after a random amount of time? Sometimes, on a noisy phone line or even on a line with call waiting enabled, the modem may hang up because it incorrectly thinks that it lost carrier. There is a setting on most modems for determining how tolerant it should be to temporary losses of carrier. Refer to the modem manual for details. Why does my connection hang after a random amount of time? Many people experience hung connections with no apparent explanation. The first thing to establish is which side of the link is hung. When using an external modem, try using &man.ping.8; to see if the TD light is flashing when data is transmitted. If it flashes but the RD light does not, the problem is with the remote end. If TD does not flash, the problem is local. With an internal modem, use the set server command in ppp.conf. When the hang occurs, connect to &man.ppp.8; using &man.pppctl.8;. If the network connection suddenly revives due to the activity on the diagnostic socket, or if it will not connect but the set socket command succeeded at startup time, the problem is local. If it can connect but things are still hung, enable local logging with set log local async and use &man.ping.8; from another window or terminal to make use of the link. The async logging will show the data being transmitted and received on the link. If data is going out and not coming back, the problem is remote. Having established whether the problem is local or remote, there are now two possibilities: If the problem is remote, read on entry . If the problem is local, read on entry . The remote end is not responding. What can I do? There is very little that can be done about this. Many ISPs will refuse to help users not running a µsoft; OS. Add enable lqr to /etc/ppp/ppp.conf, allowing &man.ppp.8; to detect the remote failure and hang up. This detection is relatively slow and therefore not that useful. First, try disabling all local compression by adding the following to the configuration: disable pred1 deflate deflate24 protocomp acfcomp shortseq vj deny pred1 deflate deflate24 protocomp acfcomp shortseq vj Then reconnect to ensure that this makes no difference. If things improve or if the problem is solved completely, determine which setting makes the difference through trial and error. This is good information for the ISP, although it may make it apparent that it is not a µsoft; system. Before contacting the ISP, enable async logging locally and wait until the connection hangs again. This may use up quite a bit of disk space. The last data read from the port may be of interest. It is usually ASCII data, and may even describe the problem (Memory fault, Core dumped). If the ISP is helpful, they should be able to enable logging on their end, then when the next link drop occurs, they may be able to tell why their side is having a problem. &man.ppp.8; has hung. What can I do? In this case, rebuild &man.ppp.8; with debugging information, and then use &man.gdb.1; to grab a stack trace from the ppp process that is stuck. To rebuild the ppp utility with debugging information, type: &prompt.root; cd /usr/src/usr.sbin/ppp &prompt.root; env DEBUG_FLAGS='-g' make clean &prompt.root; env DEBUG_FLAGS='-g' make install Then, restart ppp and wait until it hangs again. When the debug build of ppp hangs, start gdb on the stuck process by typing: &prompt.root; gdb ppp `pgrep ppp` At the gdb prompt, use the bt or where commands to get a stack trace. Save the output of the gdb session, and detach from the running process by typing quit. I keep seeing errors about magic being the same. What does it mean? Occasionally, just after connecting, there may be messages in the log that say Magic is same. Sometimes, these messages are harmless, and sometimes one side or the other exits. Most PPP implementations cannot survive this problem, and even if the link seems to come up, there will be repeated configure requests and configure acknowledgments in the log file until &man.ppp.8; eventually gives up and closes the connection. This normally happens on server machines with slow disks that are spawning a &man.getty.8; on the port, and executing &man.ppp.8; from a login script or program after login. There were reports of it happening consistently when using slirp. The reason is that in the time taken between &man.getty.8; exiting and &man.ppp.8; starting, the client-side &man.ppp.8; starts sending Line Control Protocol (LCP) packets. Because ECHO is still switched on for the port on the server, the client &man.ppp.8; sees these packets reflect back. One part of the LCP negotiation is to establish a magic number for each side of the link so that reflections can be detected. The protocol says that when the peer tries to negotiate the same magic number, a NAK should be sent and a new magic number should be chosen. During the period that the server port has ECHO turned on, the client &man.ppp.8; sends LCP packets, sees the same magic in the reflected packet and NAKs it. It also sees the NAK reflect (which also means &man.ppp.8; must change its magic). This produces a potentially enormous number of magic number changes, all of which are happily piling into the server's tty buffer. As soon as &man.ppp.8; starts on the server, it is flooded with magic number changes and almost immediately decides it has tried enough to negotiate LCP and gives up. Meanwhile, the client, who no longer sees the reflections, becomes happy just in time to see a hangup from the server. This can be avoided by allowing the peer to start negotiating with the following line in ppp.conf: set openmode passive This tells &man.ppp.8; to wait for the server to initiate LCP negotiations. Some servers however may never initiate negotiations. In this case, try something like: set openmode active 3 This tells &man.ppp.8; to be passive for 3 seconds, and then to start sending LCP requests. If the peer starts sending requests during this period, &man.ppp.8; will immediately respond rather than waiting for the full 3 second period. LCP negotiations continue until the connection is closed. What is wrong? There is currently an implementation mis-feature in &man.ppp.8; where it does not associate LCP, CCP & IPCP responses with their original requests. As a result, if one PPP implementation is more than 6 seconds slower than the other side, the other side will send two additional LCP configuration requests. This is fatal. Consider two implementations, A and B. A starts sending LCP requests immediately after connecting and B takes 7 seconds to start. When B starts, A has sent 3 LCP REQs. We are assuming the line has ECHO switched off, otherwise we would see magic number problems as described in the previous section. B sends a REQ, then an ACK to the first of A's REQs. This results in A entering the OPENED state and sending and ACK (the first) back to B. In the meantime, B sends back two more ACKs in response to the two additional REQs sent by A before B started up. B then receives the first ACK from A and enters the OPENED state. A receives the second ACK from B and goes back to the REQ-SENT state, sending another (forth) REQ as per the RFC. It then receives the third ACK and enters the OPENED state. In the meantime, B receives the forth REQ from A, resulting in it reverting to the ACK-SENT state and sending another (second) REQ and (forth) ACK as per the RFC. A gets the REQ, goes into REQ-SENT and sends another REQ. It immediately receives the following ACK and enters OPENED. This goes on until one side figures out that they are getting nowhere and gives up. The best way to avoid this is to configure one side to be passive — that is, make one side wait for the other to start negotiating. This can be done with the following command: set openmode passive Care should be taken with this option. This command can also be used to limit the amount of time that &man.ppp.8; waits for the peer to begin negotiations: set stopped N Alternatively, the following command (where N is the number of seconds to wait before starting negotiations) can be used: set openmode active N Check the manual page for details. Why does &man.ppp.8; lock up when I shell out to test it? When using shell or !, &man.ppp.8; executes a shell or the passed arguments. The ppp program will wait for the command to complete before continuing. Any attempt to use the PPP link while running the command will appear as a frozen link. This is because &man.ppp.8; is waiting for the command to complete. To execute commands like this, use !bg instead. This will execute the given command in the background, and &man.ppp.8; can continue to service the link. Why does &man.ppp.8; over a null-modem cable never exit? There is no way for &man.ppp.8; to automatically determine that a direct connection has been dropped. This is due to the lines that are used in a null-modem serial cable. When using this sort of connection, LQR should always be enabled with the following line: enable lqr LQR is accepted by default if negotiated by the peer. Why does &man.ppp.8; dial for no reason in mode? If &man.ppp.8; is dialing unexpectedly, determine the cause, and set up dial filters to prevent such dialing. To determine the cause, use the following line: set log +tcp/ip This will log all traffic through the connection. The next time the line comes up unexpectedly, the reason will be logged with a convenient timestamp next to it. Next, disable dialing under these circumstances. Usually, this sort of problem arises due to DNS lookups. To prevent DNS lookups from establishing a connection (this will not prevent &man.ppp.8; from passing the packets through an established connection), use the following: set dfilter 1 deny udp src eq 53 set dfilter 2 deny udp dst eq 53 set dfilter 3 permit 0/0 0/0 This is not always suitable, as it will effectively break demand-dial capabilities. Most programs will need a DNS lookup before doing any other network related things. In the DNS case, try to determine what is actually trying to resolve a host name. A lot of the time, Sendmail is the culprit. Make sure to configure Sendmail not to do any DNS lookups in its configuration file. See the section on using email with a dialup connection in the &os; Handbook for details. You may also want to add the following line to .mc: define(`confDELIVERY_MODE', `d')dnl This will make Sendmail queue everything until the queue is run, usually, every 30 minutes, or until a sendmail -q is done, perhaps from /etc/ppp/ppp.linkup. What do these CCP errors mean? I keep seeing the following errors in my log file: CCP: CcpSendConfigReq CCP: Received Terminate Ack (1) state = Req-Sent (6) This is because &man.ppp.8; is trying to negotiate Predictor1 compression, but the peer does not want to negotiate any compression at all. The messages are harmless, but can be silenced by disabling the compression: disable pred1 Why does &man.ppp.8; not log my connection speed? To log all lines of the modem conversation, enable the following: set log +connect This will make &man.ppp.8; log everything up until the last requested expect string. To see the connect speed when using PAP or CHAP, make sure to configure &man.ppp.8; to expect the whole CONNECT line, using something like this: set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 4 \ \"\" ATZ OK-ATZ-OK ATDT\\T TIMEOUT 60 CONNECT \\c \\n" This gets the CONNECT, sends nothing, then expects a line-feed, forcing &man.ppp.8; to read the whole CONNECT response. Why does &man.ppp.8; ignore the \ character in my chat script? The ppp utility parses each line in its configuration files so that it can interpret strings such as set phone "123 456 789" correctly and realize that the number is actually only one argument. To specify a " character, escape it using a backslash (\). When the chat interpreter parses each argument, it re-interprets the argument to find any special escape sequences such as \P or \T. As a result of this double-parsing, remember to use the correct number of escapes. To actually send a \ character, do something like: set dial "\"\" ATZ OK-ATZ-OK AT\\\\X OK" It will result in the following sequence: ATZ OK AT\X OK Or: set phone 1234567 set dial "\"\" ATZ OK ATDT\\T" It will result in the following sequence: ATZ OK ATDT1234567 What are FCS errors? FCS stands for Frame Check Sequence. Each PPP packet has a checksum attached to ensure that the data being received is the data being sent. If the FCS of an incoming packet is incorrect, the packet is dropped and the HDLC FCS count is increased. The HDLC error values can be displayed using the show hdlc command. If the link is bad or if the serial driver is dropping packets, it will produce the occasional FCS error. This is not usually worth worrying about although it does slow down the compression protocols substantially. If the link freezes as soon as it connects and produces a large number of FCS errors, make sure the modem is not using software flow control (XON/XOFF). If the link must use software flow control, use set accmap 0x000a0000 to tell &man.ppp.8; to escape the ^Q and ^S characters. Another reason for too many FCS errors may be that the remote end has stopped talking PPP. In this case, enable async logging to determine if the incoming data is actually a login or shell prompt. If it is a shell prompt at the remote end, it is possible to terminate &man.ppp.8; without dropping the line by using close lcp followed by term) to reconnect to the shell on the remote machine. If nothing in the log file indicates why the link was terminated, ask the remote administrator or ISP why the session was terminated. None of this helps — I am desperate! What can I do? If all else fails, send the details of the error, the configuration files, how &man.ppp.8; is being started, the relevant parts of the log file, and the output of netstat -rn, before and after connecting, to the &a.questions;. Serial Communications This section answers common questions about serial communications with &os;. PPP is covered in the Networking section. Which multi-port serial cards are supported by &os;? There is a list of these in the Serial Communications chapter of the Handbook. Most multi-port PCI cards that are based on 16550 or clones are supported with no extra effort. Some unnamed clone cards have also been known to work, especially those that claim to be AST compatible. Check &man.uart.4; and &man.sio.4; to get more information on configuring such cards. How do I get the boot: prompt to show on the serial console? See this section of the Handbook. How do I tell if &os; found my serial ports or modem cards? As the &os; kernel boots, it will probe for the serial ports for which the kernel is configured. Either watch the boot messages closely or run this command after the system is up and running: &prompt.user; grep -E '^(sio|uart)[0-9]' < /var/run/dmesg.boot sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A This example shows two serial ports. The first is on IRQ4, port address 0x3f8, and has a 16550A-type UART chip. The second uses the same kind of chip but is on IRQ3 and is at port address 0x2f8. Internal modem cards are treated just like serial ports, except that they always have a modem attached to the port. The GENERIC kernel includes support for two serial ports using the same IRQ and port address settings in the above example. If these settings are not right for the system, or if there are more modem cards or serial ports than the kernel is configured for, reconfigure using the instructions in building a kernel for more details. How do I access the serial ports on &os;? The third serial port, sio2, or COM3, is on /dev/cuad2 for dial-out devices, and on /dev/ttyd2 for dial-in devices. What is the difference between these two classes of devices? When opening /dev/ttydX in blocking mode, a process will wait for the corresponding cuadX device to become inactive, and then wait for the carrier detect line to go active. When the cuadX device is opened, it makes sure the serial port is not already in use by the ttydX device. If the port is available, it steals it from the ttydX device. Also, the cuadX device does not care about carrier detect. With this scheme and an auto-answer modem, remote users can log in and local users can still dial out with the same modem and the system will take care of all the conflicts. How do I enable support for a multi-port serial card? The section on kernel configuration provides information about configuring the kernel. For a multi-port serial card, place an &man.sio.4; line for each serial port on the card in the &man.device.hints.5; file. But place the IRQ specifiers on only one of the entries. All of the ports on the card should share one IRQ. For consistency, use the last serial port to specify the IRQ. Also, specify the following option in the kernel configuration file: options COM_MULTIPORT The following /boot/device.hints example is for an AST 4-port serial card on IRQ 12: hint.sio.4.at="isa" hint.sio.4.port="0x2a0" hint.sio.4.flags="0x701" hint.sio.5.at="isa" hint.sio.5.port="0x2a8" hint.sio.5.flags="0x701" hint.sio.6.at="isa" hint.sio.6.port="0x2b0" hint.sio.6.flags="0x701" hint.sio.7.at="isa" hint.sio.7.port="0x2b8" hint.sio.7.flags="0x701" hint.sio.7.irq="12" The flags indicate that the master port has minor number 7 (0x700), and all the ports share an IRQ (0x001). Can I set the default serial parameters for a port? See the Serial Communications section in the &os; Handbook. How can I enable dialup logins on my modem? Refer to the section about Dial-in Services in the &os; Handbook. How can I connect a dumb terminal to my &os; box? This information is in the Terminals section of the &os; Handbook. Why can I not run tip or cu? The built-in &man.tip.1; and &man.cu.1; utilities can only access the /var/spool/lock directory via user uucp and group dialer. Use the dialer group to control who has access to the modem or remote systems by adding user accounts to dialer. Alternatively, everyone can be configured to run &man.tip.1; and &man.cu.1; by typing: &prompt.root; chmod 4511 /usr/bin/cu &prompt.root; chmod 4511 /usr/bin/tip Miscellaneous Questions &os; uses a lot of swap space even when the computer has free memory left. Why? &os; will proactively move entirely idle, unused pages of main memory into swap in order to make more main memory available for active use. This heavy use of swap is balanced by using the extra free memory for caching. Note that while &os; is proactive in this regard, it does not arbitrarily decide to swap pages when the system is truly idle. Thus, the system will not be all paged out after leaving it idle overnight. Why does top show very little free memory even when I have very few programs running? The simple answer is that free memory is wasted memory. Any memory that programs do not actively allocate is used within the &os; kernel as disk cache. The values shown by &man.top.1; labeled as Inact, Cache, and Buf are all cached data at different aging levels. This cached data means the system does not have to access a slow disk again for data it has accessed recently, thus increasing overall performance. In general, a low value shown for Free memory in &man.top.1; is good, provided it is not very low. Why will chmod not change the permissions on symlinks? Symlinks do not have permissions, and by default, &man.chmod.1; will follow symlinks to change the permissions on the source file, if possible. For the file, foo with a symlink named bar, this command will always succeed. &prompt.user; chmod g-w bar However, the permissions on bar will not have changed. When changing modes of the file hierarchies rooted in the files instead of the files themselves, use either or together with to make this work. See &man.chmod.1; and &man.symlink.7; for more information. does a recursive &man.chmod.1;. Be careful about specifying directories or symlinks to directories to &man.chmod.1;. To change the permissions of a directory referenced by a symlink, use &man.chmod.1; without any options and follow the symlink with a trailing slash (/). For example, if foo is a symlink to directory bar, to change the permissions of foo (actually bar), do something like: &prompt.user; chmod 555 foo/ With the trailing slash, &man.chmod.1; will follow the symlink, foo, to change the permissions of the directory, bar. Can I run DOS binaries under &os;? Yes. A DOS emulation program, emulators/doscmd, is available in the &os; Ports Collection. If doscmd will not suffice, emulators/pcemu emulates an 8088 and enough BIOS services to run many DOS text-mode applications. It requires the X Window System. The Ports Collection also has emulators/dosbox. The main focus of this application is emulating old DOS games using the local file system for files. What do I need to do to translate a &os; document into my native language? See the Translation FAQ in the &os; Documentation Project Primer. Why does my email to any address at FreeBSD.org bounce? The FreeBSD.org mail system implements some Postfix checks on incoming mail and rejects mail that is either from misconfigured relays or otherwise appears likely to be spam. Some of the specific requirements are: The IP address of the SMTP client must "reverse-resolve" to a forward confirmed hostname. The fully-qualified hostname given in the SMTP conversation (either HELO or EHLO) must resolve to the IP address of the client. Other advice to help mail reach its destination include: Mail should be sent in plain text, and messages sent to mailing lists should generally be no more than 200KB in length. Avoid excessive cross posting. Choose one mailing list which seems most relevant and send it there. If you still have trouble with email infrastructure at FreeBSD.org, send a note with the details to postmaster@freebsd.org; Include a date/time interval so that logs may be reviewed — and note that we only keep one week's worth of mail logs. (Be sure to specify the time zone or offset from UTC.) Where can I find a free &os; account? While &os; does not provide open access to any of their servers, others do provide open access &unix; systems. The charge varies and limited services may be available. Arbornet, Inc, also known as M-Net, has been providing open access to &unix; systems since 1983. Starting on an Altos running System III, the site switched to BSD/OS in 1991. In June of 2000, the site switched again to &os;. M-Net can be accessed via telnet and SSH and provides basic access to the entire &os; software suite. However, network access is limited to members and patrons who donate to the system, which is run as a non-profit organization. M-Net also provides an bulletin board system and interactive chat. What is the cute little red guy's name? He does not have one, and is just called the BSD daemon. If you insist upon using a name, call him beastie. Note that beastie is pronounced BSD. More about the BSD daemon is available on his home page. Can I use the BSD daemon image? Perhaps. The BSD daemon is copyrighted by Marshall Kirk McKusick. Check his Statement on the Use of the BSD Daemon Figure for detailed usage terms. In summary, the image can be used in a tasteful manner, for personal use, so long as appropriate credit is given. Before using the logo commercially, contact &a.mckusick.email; for permission. More details are available on the BSD Daemon's home page. Do you have any BSD daemon images I could use? Xfig and eps drawings are available under /usr/share/examples/BSD_daemon/. I have seen an acronym or other term on the mailing lists and I do not understand what it means. Where should I look? Refer to the &os; Glossary. Why should I care what color the bikeshed is? The really, really short answer is that you should not. The somewhat longer answer is that just because you are capable of building a bikeshed does not mean you should stop others from building one just because you do not like the color they plan to paint it. This is a metaphor indicating that you need not argue about every little feature just because you know enough to do so. Some people have commented that the amount of noise generated by a change is inversely proportional to the complexity of the change. The longer and more complete answer is that after a very long argument about whether &man.sleep.1; should take fractional second arguments, &a.phk.email; posted a long message entitled A bike shed (any color will do) on greener grass.... The appropriate portions of that message are quoted below.
&a.phk.email; on &a.hackers.name;, October 2, 1999 What is it about this bike shed? Some of you have asked me. It is a long story, or rather it is an old story, but it is quite short actually. C. Northcote Parkinson wrote a book in the early 1960s, called Parkinson's Law, which contains a lot of insight into the dynamics of management. [snip a bit of commentary on the book] In the specific example involving the bike shed, the other vital component is an atomic power-plant, I guess that illustrates the age of the book. Parkinson shows how you can go into the board of directors and get approval for building a multi-million or even billion dollar atomic power plant, but if you want to build a bike shed you will be tangled up in endless discussions. Parkinson explains that this is because an atomic plant is so vast, so expensive and so complicated that people cannot grasp it, and rather than try, they fall back on the assumption that somebody else checked all the details before it got this far. Richard P. Feynmann gives a couple of interesting, and very much to the point, examples relating to Los Alamos in his books. A bike shed on the other hand. Anyone can build one of those over a weekend, and still have time to watch the game on TV. So no matter how well prepared, no matter how reasonable you are with your proposal, somebody will seize the chance to show that he is doing his job, that he is paying attention, that he is here. In Denmark we call it setting your fingerprint. It is about personal pride and prestige, it is about being able to point somewhere and say There! I did that. It is a strong trait in politicians, but present in most people given the chance. Just think about footsteps in wet cement.
The &os; Funnies How cool is &os;? Q. Has anyone done any temperature testing while running &os;? I know &linux; runs cooler than DOS, but have never seen a mention of &os;. It seems to run really hot. A. No, but we have done numerous taste tests on blindfolded volunteers who have also had 250 micrograms of LSD-25 administered beforehand. 35% of the volunteers said that &os; tasted sort of orange, whereas &linux; tasted like purple haze. Neither group mentioned any significant variances in temperature. We eventually had to throw the results of this survey out entirely anyway when we found that too many volunteers were wandering out of the room during the tests, thus skewing the results. We think most of the volunteers are at Apple now, working on their new scratch and sniff GUI. It is a funny old business we are in! Seriously, &os; uses the HLT (halt) instruction when the system is idle thus lowering its energy consumption and therefore the heat it generates. Also if you have ACPI (Advanced Configuration and Power Interface) configured, then &os; can also put the CPU into a low power mode. Who is scratching in my memory banks?? Q. Is there anything odd that &os; does when compiling the kernel which would cause the memory to make a scratchy sound? When compiling (and for a brief moment after recognizing the floppy drive upon startup, as well), a strange scratchy sound emanates from what appears to be the memory banks. A. Yes! You will see frequent references to daemons in the BSD documentation, and what most people do not know is that this refers to genuine, non-corporeal entities that now possess your computer. The scratchy sound coming from your memory is actually high-pitched whispering exchanged among the daemons as they best decide how to deal with various system administration tasks. If the noise gets to you, a good fdisk /mbr from DOS will get rid of them, but do not be surprised if they react adversely and try to stop you. In fact, if at any point during the exercise you hear the satanic voice of Bill Gates coming from the built-in speaker, take off running and do not ever look back! Freed from the counterbalancing influence of the BSD daemons, the twin demons of DOS and &windows; are often able to re-assert total control over your machine to the eternal damnation of your soul. Now that you know, given a choice you would probably prefer to get used to the scratchy noises, no? How many &os; hackers does it take to change a lightbulb? One thousand, one hundred and sixty-nine: Twenty-three to complain to -CURRENT about the lights being out; Four to claim that it is a configuration problem, and that such matters really belong on -questions; Three to submit PRs about it, one of which is misfiled under doc and consists only of it's dark; One to commit an untested lightbulb which breaks buildworld, then back it out five minutes later; Eight to flame the PR originators for not including patches in their PRs; Five to complain about buildworld being broken; Thirty-one to answer that it works for them, and they must have updated at a bad time; One to post a patch for a new lightbulb to -hackers; One to complain that he had patches for this three years ago, but when he sent them to -CURRENT they were just ignored, and he has had bad experiences with the PR system; besides, the proposed new lightbulb is non-reflexive; Thirty-seven to scream that lightbulbs do not belong in the base system, that committers have no right to do things like this without consulting the Community, and WHAT IS -CORE DOING ABOUT IT!? Two hundred to complain about the color of the bicycle shed; Three to point out that the patch breaks &man.style.9;; Seventeen to complain that the proposed new lightbulb is under GPL; Five hundred and eighty-six to engage in a flame war about the comparative advantages of the GPL, the BSD license, the MIT license, the NPL, and the personal hygiene of unnamed FSF founders; Seven to move various portions of the thread to -chat and -advocacy; One to commit the suggested lightbulb, even though it shines dimmer than the old one; Two to back it out with a furious flame of a commit message, arguing that &os; is better off in the dark than with a dim lightbulb; Forty-six to argue vociferously about the backing out of the dim lightbulb and demanding a statement from -core; Eleven to request a smaller lightbulb so it will fit their Tamagotchi if we ever decide to port &os; to that platform; Seventy-three to complain about the SNR on -hackers and -chat and unsubscribe in protest; Thirteen to post unsubscribe, How do I unsubscribe?, or Please remove me from the list, followed by the usual footer; One to commit a working lightbulb while everybody is too busy flaming everybody else to notice; Thirty-one to point out that the new lightbulb would shine 0.364% brighter if compiled with TenDRA (although it will have to be reshaped into a cube), and that &os; should therefore switch to TenDRA instead of GCC; One to complain that the new lightbulb lacks fairings; Nine (including the PR originators) to ask what is MFC?; Fifty-seven to complain about the lights being out two weeks after the bulb has been changed. &a.nik.email; adds: I was laughing quite hard at this. And then I thought, Hang on, shouldn't there be '1 to document it.' in that list somewhere? And then I was enlightened :-) &a.tabthorpe.email; says: None, real &os; hackers are not afraid of the dark! Where does data written to /dev/null go? It goes into a special data sink in the CPU where it is converted to heat which is vented through the heatsink / fan assembly. This is why CPU cooling is increasingly important; as people get used to faster processors, they become careless with their data and more and more of it ends up in /dev/null, overheating their CPUs. If you delete /dev/null (which effectively disables the CPU data sink) your CPU may run cooler but your system will quickly become constipated with all that excess data and start to behave erratically. If you have a fast network connection you can cool down your CPU by reading data out of /dev/random and sending it off somewhere; however you run the risk of overheating your network connection and / or angering your ISP, as most of the data will end up getting converted to heat by their equipment, but they generally have good cooling, so if you do not overdo it you should be OK. Paul Robinson adds: There are other methods. As every good sysadmin knows, it is part of standard practice to send data to the screen of interesting variety to keep all the pixies that make up your picture happy. Screen pixies (commonly mis-typed or re-named as pixels) are categorized by the type of hat they wear (red, green or blue) and will hide or appear (thereby showing the color of their hat) whenever they receive a little piece of food. Video cards turn data into pixie-food, and then send them to the pixies — the more expensive the card, the better the food, so the better behaved the pixies are. They also need constant stimulation — this is why screen savers exist. To take your suggestions further, you could just throw the random data to console, thereby letting the pixies consume it. This causes no heat to be produced at all, keeps the pixies happy and gets rid of your data quite quickly, even if it does make things look a bit messy on your screen. Incidentally, as an ex-admin of a large ISP who experienced many problems attempting to maintain a stable temperature in a server room, I would strongly discourage people sending the data they do not want out to the network. The fairies who do the packet switching and routing get annoyed by it as well. My colleague sits at the computer too much, how can I prank her? Install games/sl and wait for her to mistype sl for ls. Advanced Topics How can I learn more about &os;'s internals? See the &os; Architecture Handbook. Additionally, much general &unix; knowledge is directly applicable to &os;. How can I contribute to &os;? See the article on Contributing to &os; for specific advice on how to do this. Assistance is more than welcome! What are snapshots and releases? There are currently &rel.numbranch; active/semi-active branches in the &os; Subversion Repository. (Earlier branches are only changed very rarely, which is why there are only &rel.numbranch; active branches of development): &rel2.releng; AKA &rel2.stable; &rel.releng; AKA &rel.stable; &rel.head.releng; AKA -CURRENT AKA &rel.head; HEAD is not an actual branch tag. It is a symbolic constant for the current, non-branched development stream known as -CURRENT. Right now, -CURRENT is the &rel.head.relx; development stream; the &rel.stable; branch, &rel.releng;, forked off from -CURRENT in &rel.relengdate; and the &rel2.stable; branch, &rel2.releng;, forked off from -CURRENT in &rel2.relengdate;. I have written a kernel extension, who do I send it to? Take a look at the article on Contributing to &os; to learn how to submit code. And thanks for the thought! How can I make the most of the data I see when my kernel panics? Here is typical kernel panic: Fatal trap 12: page fault while in kernel mode fault virtual address = 0x40 fault code = supervisor read, page not present instruction pointer = 0x8:0xf014a7e5 stack pointer = 0x10:0xf4ed6f24 frame pointer = 0x10:0xf4ed6f28 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, def32 1, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 80 (mount) interrupt mask = trap number = 12 panic: page fault This message is not enough. While the instruction pointer value is important, it is also configuration dependent as it varies depending on the kernel image. If it is a GENERIC kernel image from one of the snapshots, it is possible for somebody else to track down the offending function, but for a custom kernel, only you can tell us where the fault occurred. To proceed: Write down the instruction pointer value. Note that the 0x8: part at the beginning is not significant in this case: it is the 0xf0xxxxxx part that we want. When the system reboots, do the following: &prompt.user; nm -n kernel.that.caused.the.panic | grep f0xxxxxx where f0xxxxxx is the instruction pointer value. The odds are you will not get an exact match since the symbols in the kernel symbol table are for the entry points of functions and the instruction pointer address will be somewhere inside a function, not at the start. If you do not get an exact match, omit the last digit from the instruction pointer value and try again: &prompt.user; nm -n kernel.that.caused.the.panic | grep f0xxxxx If that does not yield any results, chop off another digit. Repeat until there is some sort of output. The result will be a possible list of functions which caused the panic. This is a less than exact mechanism for tracking down the point of failure, but it is better than nothing. However, the best way to track down the cause of a panic is by capturing a crash dump, then using &man.kgdb.1; to generate a stack trace on the crash dump. In any case, the method is this: Make sure that the following line is included in the kernel configuration file: makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols Change to the /usr/src directory: &prompt.root; cd /usr/src Compile the kernel: &prompt.root; make buildkernel KERNCONF=MYKERNEL Wait for &man.make.1; to finish compiling. &prompt.root; make installkernel KERNCONF=MYKERNEL Reboot. If KERNCONF is not included, the GENERIC kernel will instead be built and installed. The &man.make.1; process will have built two kernels. /usr/obj/usr/src/sys/MYKERNEL/kernel and /usr/obj/usr/src/sys/MYKERNEL/kernel.debug. kernel was installed as /boot/kernel/kernel, while kernel.debug can be used as the source of debugging symbols for &man.kgdb.1;. To capture a crash dump, edit /etc/rc.conf and set dumpdev to point to either the swap partition or AUTO. This will cause the &man.rc.8; scripts to use the &man.dumpon.8; command to enable crash dumps. This command can also be run manually. After a panic, the crash dump can be recovered using &man.savecore.8;; if dumpdev is set in /etc/rc.conf, the &man.rc.8; scripts will run &man.savecore.8; automatically and put the crash dump in /var/crash. &os; crash dumps are usually the same size as physical RAM. Therefore, make sure there is enough space in /var/crash to hold the dump. Alternatively, run &man.savecore.8; manually and have it recover the crash dump to another directory with more room. It is possible to limit the size of the crash dump by using options MAXMEM=N where N is the size of kernel's memory usage in KBs. For example, for 1 GB of RAM, limit the kernel's memory usage to 128 MB, so that the crash dump size will be 128 MB instead of 1 GB. Once the crash dump has been recovered , get a stack trace as follows: &prompt.user; kgdb /usr/obj/usr/src/sys/MYKERNEL/kernel.debug /var/crash/vmcore.0 (kgdb) backtrace Note that there may be several screens worth of information. Ideally, use &man.script.1; to capture all of them. Using the unstripped kernel image with all the debug symbols should show the exact line of kernel source code where the panic occurred. The stack trace is usually read from the bottom up to trace the exact sequence of events that lead to the crash. &man.kgdb.1; can also be used to print out the contents of various variables or structures to examine the system state at the time of the crash. If a second computer is available, &man.kgdb.1; can be configured to do remote debugging, including setting breakpoints and single-stepping through the kernel code. If DDB is enabled and the kernel drops into the debugger, a panic and a crash dump can be forced by typing panic at the ddb prompt. It may stop in the debugger again during the panic phase. If it does, type continue and it will finish the crash dump. Why has dlsym() stopped working for ELF executables? The ELF toolchain does not, by default, make the symbols defined in an executable visible to the dynamic linker. Consequently dlsym() searches on handles obtained from calls to dlopen(NULL, flags) will fail to find such symbols. To search, using dlsym(), for symbols present in the main executable of a process, link the executable using the option to the ELF linker (&man.ld.1;). How can I increase or reduce the kernel address space on i386? By default, the kernel address space is 1 GB (2 GB for PAE) for i386. When running a network-intensive server or using ZFS, this will probably not be enough. Add the following line to the kernel configuration file to increase available space and rebuild the kernel: options KVA_PAGES=N To find the correct value of N, divide the desired address space size (in megabytes) by four. (For example, it is 512 for 2 GB.) Acknowledgments This innocent little Frequently Asked Questions document has been written, rewritten, edited, folded, spindled, mutilated, eviscerated, contemplated, discombobulated, cogitated, regurgitated, rebuilt, castigated, and reinvigorated over the last decade, by a cast of hundreds if not thousands. Repeatedly. We wish to thank every one of the people responsible, and we encourage you to join them in making this FAQ even better. &bibliography;