Page MenuHomeFreeBSD
Files F144484763

D50067.1774915708.diff
No OneTemporary
Actions

Size
283 KB
Referenced Files
None
Subscribers
None

D50067.1774915708.diff
View Options

This file is larger than 256 KB, so syntax highlighting was skipped.
diff --git a/sys/conf/files b/sys/conf/files
--- a/sys/conf/files
+++ b/sys/conf/files
@@ -2284,6 +2284,8 @@
compile-with "${NORMAL_C} -I$S/dev/ixgbe"
dev/ixgbe/ixgbe_x550.c optional ix inet | ixv inet \
compile-with "${NORMAL_C} -I$S/dev/ixgbe"
+dev/ixgbe/ixgbe_e610.c optional ix inet | ixv inet \
+ compile-with "${NORMAL_C} -I$S/dev/ixgbe"
dev/ixgbe/ixgbe_dcb.c optional ix inet | ixv inet \
compile-with "${NORMAL_C} -I$S/dev/ixgbe"
dev/ixgbe/ixgbe_dcb_82598.c optional ix inet | ixv inet \
diff --git a/sys/dev/ixgbe/if_ix.c b/sys/dev/ixgbe/if_ix.c
--- a/sys/dev/ixgbe/if_ix.c
+++ b/sys/dev/ixgbe/if_ix.c
@@ -45,7 +45,7 @@
/************************************************************************
* Driver version
************************************************************************/
-static const char ixgbe_driver_version[] = "4.0.1-k";
+static const char ixgbe_driver_version[] = "5.0.1-k";
/************************************************************************
* PCI Device ID Table
@@ -144,6 +144,16 @@
"Intel(R) X540-T2 (Bypass)"),
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_BYPASS,
"Intel(R) X520 82599 (Bypass)"),
+ PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_E610_BACKPLANE,
+ "Intel(R) E610 (Backplane)"),
+ PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_E610_SFP,
+ "Intel(R) E610 (SFP)"),
+ PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_E610_2_5G_T,
+ "Intel(R) E610 (2.5 GbE)"),
+ PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_E610_10G_T,
+ "Intel(R) E610 (10 GbE)"),
+ PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_E610_SGMII,
+ "Intel(R) E610 (SGMII)"),
/* required last entry */
PVID_END
};
@@ -253,6 +263,10 @@
static void ixgbe_handle_msf(void *);
static void ixgbe_handle_mod(void *);
static void ixgbe_handle_phy(void *);
+static void ixgbe_handle_fw_event(void *);
+
+static int ixgbe_enable_lse(struct ixgbe_softc *sc);
+static int ixgbe_disable_lse(struct ixgbe_softc *sc);
/************************************************************************
* FreeBSD Device Interface Entry Points
@@ -621,6 +635,7 @@
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
case ixgbe_mac_X550EM_a:
+ case ixgbe_mac_E610:
table_size = 512;
break;
default:
@@ -902,6 +917,32 @@
} /* ixgbe_initialize_transmit_units */
+static int
+ixgbe_check_fw_api_version(struct ixgbe_softc *sc)
+{
+ struct ixgbe_hw *hw = &sc->hw;
+ if (hw->api_maj_ver > IXGBE_FW_API_VER_MAJOR) {
+ device_printf(sc->dev,
+ "The driver for the device stopped because the NVM "
+ "image is newer than expected. You must install the "
+ "most recent version of the network driver.\n");
+ return (EOPNOTSUPP);
+ } else if (hw->api_maj_ver == IXGBE_FW_API_VER_MAJOR &&
+ hw->api_min_ver > (IXGBE_FW_API_VER_MINOR + 2)) {
+ device_printf(sc->dev,
+ "The driver for the device detected a newer version of "
+ "the NVM image than expected. Please install the most "
+ "recent version of the network driver.\n");
+ } else if (hw->api_maj_ver < IXGBE_FW_API_VER_MAJOR ||
+ hw->api_min_ver < IXGBE_FW_API_VER_MINOR - 2) {
+ device_printf(sc->dev,
+ "The driver for the device detected an older version "
+ "of the NVM image than expected. "
+ "Please update the NVM image.\n");
+ }
+ return (0);
+}
+
/************************************************************************
* ixgbe_register
************************************************************************/
@@ -970,6 +1011,9 @@
goto err_pci;
}
+ if (hw->mac.type == ixgbe_mac_E610)
+ ixgbe_init_aci(hw);
+
if (hw->mac.ops.fw_recovery_mode &&
hw->mac.ops.fw_recovery_mode(hw)) {
device_printf(dev,
@@ -1058,6 +1102,12 @@
break;
}
+ /* Check the FW API version */
+ if (hw->mac.type == ixgbe_mac_E610 && ixgbe_check_fw_api_version(sc)) {
+ error = EIO;
+ goto err_pci;
+ }
+
/* Most of the iflib initialization... */
iflib_set_mac(ctx, hw->mac.addr);
@@ -1111,6 +1161,9 @@
IXGBE_WRITE_REG(&sc->hw, IXGBE_CTRL_EXT, ctrl_ext);
ixgbe_free_pci_resources(ctx);
+ if (hw->mac.type == ixgbe_mac_E610)
+ ixgbe_shutdown_aci(hw);
+
return (error);
} /* ixgbe_if_attach_pre */
@@ -1358,6 +1411,10 @@
/* Media types with matching FreeBSD media defines */
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_T)
ifmedia_add(sc->media, IFM_ETHER | IFM_10G_T, 0, NULL);
+ if (layer & IXGBE_PHYSICAL_LAYER_5000BASE_T)
+ ifmedia_add(sc->media, IFM_ETHER | IFM_5000_T, 0, NULL);
+ if (layer & IXGBE_PHYSICAL_LAYER_2500BASE_T)
+ ifmedia_add(sc->media, IFM_ETHER | IFM_2500_T, 0, NULL);
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_T)
ifmedia_add(sc->media, IFM_ETHER | IFM_1000_T, 0, NULL);
if (layer & IXGBE_PHYSICAL_LAYER_100BASE_TX)
@@ -1459,6 +1516,7 @@
}
case ixgbe_mac_X550EM_x:
case ixgbe_mac_X550EM_a:
+ case ixgbe_mac_E610:
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber)
return (true);
return (false);
@@ -1525,6 +1583,15 @@
IXGBE_LINK_SPEED_5GB_FULL);
}
+ if (hw->mac.type == ixgbe_mac_E610) {
+ hw->phy.ops.init(hw);
+ err = ixgbe_enable_lse(sc);
+ if (err)
+ device_printf(sc->dev,
+ "Failed to enable Link Status Event, "
+ "error: %d", err);
+ }
+
if (hw->mac.ops.setup_link)
err = hw->mac.ops.setup_link(hw, autoneg,
sc->link_up);
@@ -2158,14 +2225,15 @@
ixgbe_set_pci_config_data_generic(hw, link);
display:
- device_printf(dev, "PCI Express Bus: Speed %s %s\n",
- ((hw->bus.speed == ixgbe_bus_speed_8000) ? "8.0GT/s" :
+ device_printf(dev, "PCI Express Bus: Speed %s Width %s\n",
+ ((hw->bus.speed == ixgbe_bus_speed_16000) ? "16.0GT/s" :
+ (hw->bus.speed == ixgbe_bus_speed_8000) ? "8.0GT/s" :
(hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0GT/s" :
(hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5GT/s" :
"Unknown"),
- ((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" :
- (hw->bus.width == ixgbe_bus_width_pcie_x4) ? "Width x4" :
- (hw->bus.width == ixgbe_bus_width_pcie_x1) ? "Width x1" :
+ ((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "x8" :
+ (hw->bus.width == ixgbe_bus_width_pcie_x4) ? "x4" :
+ (hw->bus.width == ixgbe_bus_width_pcie_x1) ? "x1" :
"Unknown"));
if (bus_info_valid) {
@@ -2372,14 +2440,17 @@
ifmr->ifm_status |= IFM_ACTIVE;
layer = sc->phy_layer;
- if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_T ||
- layer & IXGBE_PHYSICAL_LAYER_1000BASE_T ||
- layer & IXGBE_PHYSICAL_LAYER_100BASE_TX ||
- layer & IXGBE_PHYSICAL_LAYER_10BASE_T)
+ if (layer & IXGBE_PHYSICAL_LAYERS_BASE_T_ALL)
switch (sc->link_speed) {
case IXGBE_LINK_SPEED_10GB_FULL:
ifmr->ifm_active |= IFM_10G_T | IFM_FDX;
break;
+ case IXGBE_LINK_SPEED_5GB_FULL:
+ ifmr->ifm_active |= IFM_5000_T | IFM_FDX;
+ break;
+ case IXGBE_LINK_SPEED_2_5GB_FULL:
+ ifmr->ifm_active |= IFM_2500_T | IFM_FDX;
+ break;
case IXGBE_LINK_SPEED_1GB_FULL:
ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
break;
@@ -2390,15 +2461,6 @@
ifmr->ifm_active |= IFM_10_T | IFM_FDX;
break;
}
- if (hw->mac.type == ixgbe_mac_X550)
- switch (sc->link_speed) {
- case IXGBE_LINK_SPEED_5GB_FULL:
- ifmr->ifm_active |= IFM_5000_T | IFM_FDX;
- break;
- case IXGBE_LINK_SPEED_2_5GB_FULL:
- ifmr->ifm_active |= IFM_2500_T | IFM_FDX;
- break;
- }
if (layer & IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU ||
layer & IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA)
switch (sc->link_speed) {
@@ -2676,6 +2738,11 @@
sc->task_requests |= IXGBE_REQUEST_TASK_LSC;
}
+ if (eicr & IXGBE_EICR_FW_EVENT) {
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EICR_FW_EVENT);
+ sc->task_requests |= IXGBE_REQUEST_TASK_FWEVENT;
+ }
+
if (sc->hw.mac.type != ixgbe_mac_82598EB) {
if ((sc->feat_en & IXGBE_FEATURE_FDIR) &&
(eicr & IXGBE_EICR_FLOW_DIR)) {
@@ -2734,11 +2801,16 @@
/* Check for VF message */
if ((sc->feat_en & IXGBE_FEATURE_SRIOV) &&
- (eicr & IXGBE_EICR_MAILBOX))
+ (eicr & IXGBE_EICR_MAILBOX)) {
sc->task_requests |= IXGBE_REQUEST_TASK_MBX;
+ }
}
- if (ixgbe_is_sfp(hw)) {
+ /*
+ * On E610, the firmware handles PHY configuration, so
+ * there is no need to perform any SFP-specific tasks.
+ */
+ if (hw->mac.type != ixgbe_mac_E610 && ixgbe_is_sfp(hw)) {
/* Pluggable optics-related interrupt */
if (hw->mac.type >= ixgbe_mac_X540)
eicr_mask = IXGBE_EICR_GPI_SDP0_X540;
@@ -2985,7 +3057,13 @@
callout_drain(&sc->fw_mode_timer);
+ if (sc->hw.mac.type == ixgbe_mac_E610) {
+ ixgbe_disable_lse(sc);
+ ixgbe_shutdown_aci(&sc->hw);
+ }
+
ixgbe_free_pci_resources(ctx);
+
free(sc->mta, M_IXGBE);
return (0);
@@ -3404,6 +3482,7 @@
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
case ixgbe_mac_X550EM_a:
+ case ixgbe_mac_E610:
if (type == -1) { /* MISC IVAR */
index = (entry & 1) * 8;
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC);
@@ -3825,6 +3904,96 @@
"Error handling LASI interrupt: %d\n", error);
} /* ixgbe_handle_phy */
+/************************************************************************
+ * ixgbe_enable_lse - enable link status events
+ *
+ * Sets mask and enables link status events
+ ************************************************************************/
+s32 ixgbe_enable_lse(struct ixgbe_softc *sc)
+{
+ s32 error;
+
+ u16 mask = ~((u16)(IXGBE_ACI_LINK_EVENT_UPDOWN |
+ IXGBE_ACI_LINK_EVENT_MEDIA_NA |
+ IXGBE_ACI_LINK_EVENT_MODULE_QUAL_FAIL |
+ IXGBE_ACI_LINK_EVENT_PHY_FW_LOAD_FAIL));
+
+ error = ixgbe_configure_lse(&sc->hw, TRUE, mask);
+ if (error)
+ return (error);
+
+ sc->lse_mask = mask;
+ return (IXGBE_SUCCESS);
+} /* ixgbe_enable_lse */
+
+/************************************************************************
+ * ixgbe_disable_lse - disable link status events
+ ************************************************************************/
+s32 ixgbe_disable_lse(struct ixgbe_softc *sc)
+{
+ s32 error;
+
+ error = ixgbe_configure_lse(&sc->hw, false, sc->lse_mask);
+ if (error)
+ return (error);
+
+ sc->lse_mask = 0;
+ return (IXGBE_SUCCESS);
+} /* ixgbe_disable_lse */
+
+/************************************************************************
+ * ixgbe_handle_fw_event - Tasklet for MSI-X Link Status Event interrupts
+ ************************************************************************/
+static void
+ixgbe_handle_fw_event(void *context)
+{
+ if_ctx_t ctx = context;
+ struct ixgbe_softc *sc = iflib_get_softc(ctx);
+ struct ixgbe_hw *hw = &sc->hw;
+ struct ixgbe_aci_event event;
+ bool pending = false;
+ s32 error;
+
+ event.buf_len = IXGBE_ACI_MAX_BUFFER_SIZE;
+ event.msg_buf = malloc(event.buf_len, M_IXGBE, M_ZERO | M_NOWAIT);
+ if (!event.msg_buf) {
+ device_printf(sc->dev, "Can not allocate buffer for "
+ "event message\n");
+ return;
+ }
+
+ do {
+ error = ixgbe_aci_get_event(hw, &event, &pending);
+ if (error) {
+ device_printf(sc->dev, "Error getting event from "
+ "FW:%d\n", error);
+ break;
+ }
+
+ switch (le16toh(event.desc.opcode)) {
+ case ixgbe_aci_opc_get_link_status:
+ sc->task_requests |= IXGBE_REQUEST_TASK_LSC;
+ break;
+
+ case ixgbe_aci_opc_temp_tca_event:
+ if (hw->adapter_stopped == FALSE)
+ ixgbe_if_stop(ctx);
+ device_printf(sc->dev,
+ "CRITICAL: OVER TEMP!! PHY IS SHUT DOWN!!\n");
+ device_printf(sc->dev, "System shutdown required!\n");
+ break;
+
+ default:
+ device_printf(sc->dev,
+ "Unknown FW event captured, opcode=0x%04X\n",
+ le16toh(event.desc.opcode));
+ break;
+ }
+ } while (pending);
+
+ free(event.msg_buf, M_IXGBE);
+} /* ixgbe_handle_fw_event */
+
/************************************************************************
* ixgbe_if_stop - Stop the hardware
*
@@ -3899,6 +4068,8 @@
}
/* Handle task requests from msix_link() */
+ if (sc->task_requests & IXGBE_REQUEST_TASK_FWEVENT)
+ ixgbe_handle_fw_event(ctx);
if (sc->task_requests & IXGBE_REQUEST_TASK_MOD)
ixgbe_handle_mod(ctx);
if (sc->task_requests & IXGBE_REQUEST_TASK_MSF)
@@ -3986,6 +4157,9 @@
mask |= IXGBE_EICR_GPI_SDP0_X540;
mask |= IXGBE_EIMS_ECC;
break;
+ case ixgbe_mac_E610:
+ mask |= IXGBE_EIMS_FW_EVENT;
+ break;
default:
break;
}
@@ -4008,6 +4182,7 @@
/* Don't autoclear Link */
mask &= ~IXGBE_EIMS_OTHER;
mask &= ~IXGBE_EIMS_LSC;
+ mask &= ~IXGBE_EIMS_FW_EVENT;
if (sc->feat_cap & IXGBE_FEATURE_SRIOV)
mask &= ~IXGBE_EIMS_MAILBOX;
IXGBE_WRITE_REG(hw, IXGBE_EIAC, mask);
@@ -4026,7 +4201,7 @@
} /* ixgbe_if_enable_intr */
/************************************************************************
- * ixgbe_disable_intr
+ * ixgbe_if_disable_intr
************************************************************************/
static void
ixgbe_if_disable_intr(if_ctx_t ctx)
@@ -4176,8 +4351,9 @@
/* External PHY interrupt */
if ((hw->phy.type == ixgbe_phy_x550em_ext_t) &&
- (eicr & IXGBE_EICR_GPI_SDP0_X540))
+ (eicr & IXGBE_EICR_GPI_SDP0_X540)) {
sc->task_requests |= IXGBE_REQUEST_TASK_PHY;
+ }
return (FILTER_SCHEDULE_THREAD);
} /* ixgbe_intr */
@@ -4219,7 +4395,7 @@
int error, fc;
sc = (struct ixgbe_softc *)arg1;
- fc = sc->hw.fc.current_mode;
+ fc = sc->hw.fc.requested_mode;
error = sysctl_handle_int(oidp, &fc, 0, req);
if ((error) || (req->newptr == NULL))
@@ -4248,12 +4424,10 @@
case ixgbe_fc_rx_pause:
case ixgbe_fc_tx_pause:
case ixgbe_fc_full:
- sc->hw.fc.requested_mode = fc;
if (sc->num_rx_queues > 1)
ixgbe_disable_rx_drop(sc);
break;
case ixgbe_fc_none:
- sc->hw.fc.requested_mode = ixgbe_fc_none;
if (sc->num_rx_queues > 1)
ixgbe_enable_rx_drop(sc);
break;
@@ -4261,6 +4435,8 @@
return (EINVAL);
}
+ sc->hw.fc.requested_mode = fc;
+
/* Don't autoneg if forcing a value */
sc->hw.fc.disable_fc_autoneg = true;
ixgbe_fc_enable(&sc->hw);
@@ -4978,6 +5154,9 @@
if (sc->hw.device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP)
sc->feat_cap &= ~IXGBE_FEATURE_LEGACY_IRQ;
break;
+ case ixgbe_mac_E610:
+ sc->feat_cap |= IXGBE_FEATURE_RECOVERY_MODE;
+ break;
default:
break;
}
diff --git a/sys/dev/ixgbe/if_ixv.c b/sys/dev/ixgbe/if_ixv.c
--- a/sys/dev/ixgbe/if_ixv.c
+++ b/sys/dev/ixgbe/if_ixv.c
@@ -68,6 +68,8 @@
"Intel(R) X552 Virtual Function"),
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_VF,
"Intel(R) X553 Virtual Function"),
+ PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_E610_VF,
+ "Intel(R) E610 Virtual Function"),
/* required last entry */
PVID_END
};
@@ -1020,6 +1022,9 @@
case IXGBE_DEV_ID_X550EM_A_VF:
hw->mac.type = ixgbe_mac_X550EM_a_vf;
break;
+ case IXGBE_DEV_ID_E610_VF:
+ hw->mac.type = ixgbe_mac_E610_vf;
+ break;
default:
device_printf(dev, "unknown mac type\n");
hw->mac.type = ixgbe_mac_unknown;
@@ -1955,6 +1960,7 @@
case ixgbe_mac_X550_vf:
case ixgbe_mac_X550EM_x_vf:
case ixgbe_mac_X550EM_a_vf:
+ case ixgbe_mac_E610_vf:
sc->feat_cap |= IXGBE_FEATURE_NEEDS_CTXD;
sc->feat_cap |= IXGBE_FEATURE_RSS;
break;
diff --git a/sys/dev/ixgbe/ixgbe.h b/sys/dev/ixgbe/ixgbe.h
--- a/sys/dev/ixgbe/ixgbe.h
+++ b/sys/dev/ixgbe/ixgbe.h
@@ -86,6 +86,7 @@
#include "ixgbe_phy.h"
#include "ixgbe_vf.h"
#include "ixgbe_features.h"
+#include "ixgbe_e610.h"
/* Tunables */
@@ -195,6 +196,15 @@
CSUM_IP_UDP|CSUM_IP_TCP|CSUM_IP_SCTP| \
CSUM_IP6_UDP|CSUM_IP6_TCP|CSUM_IP6_SCTP)
+/* All BASE-T Physical layers */
+#define IXGBE_PHYSICAL_LAYERS_BASE_T_ALL \
+ (IXGBE_PHYSICAL_LAYER_10GBASE_T |\
+ IXGBE_PHYSICAL_LAYER_5000BASE_T |\
+ IXGBE_PHYSICAL_LAYER_2500BASE_T |\
+ IXGBE_PHYSICAL_LAYER_1000BASE_T |\
+ IXGBE_PHYSICAL_LAYER_100BASE_TX |\
+ IXGBE_PHYSICAL_LAYER_10BASE_T)
+
#define IXGBE_CAPS (IFCAP_HWCSUM | IFCAP_HWCSUM_IPV6 | IFCAP_TSO | \
IFCAP_LRO | IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_HWTSO | \
IFCAP_VLAN_HWCSUM | IFCAP_JUMBO_MTU | IFCAP_VLAN_MTU | \
@@ -464,6 +474,7 @@
/* Feature capable/enabled flags. See ixgbe_features.h */
u32 feat_cap;
u32 feat_en;
+ u16 lse_mask;
};
/* Precision Time Sync (IEEE 1588) defines */
diff --git a/sys/dev/ixgbe/ixgbe_api.h b/sys/dev/ixgbe/ixgbe_api.h
--- a/sys/dev/ixgbe/ixgbe_api.h
+++ b/sys/dev/ixgbe/ixgbe_api.h
@@ -48,6 +48,7 @@
extern s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw);
extern s32 ixgbe_init_ops_X550EM_x(struct ixgbe_hw *hw);
extern s32 ixgbe_init_ops_X550EM_a(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_ops_E610(struct ixgbe_hw *hw);
extern s32 ixgbe_init_ops_vf(struct ixgbe_hw *hw);
s32 ixgbe_set_mac_type(struct ixgbe_hw *hw);
diff --git a/sys/dev/ixgbe/ixgbe_api.c b/sys/dev/ixgbe/ixgbe_api.c
--- a/sys/dev/ixgbe/ixgbe_api.c
+++ b/sys/dev/ixgbe/ixgbe_api.c
@@ -112,11 +112,15 @@
case ixgbe_mac_X550EM_a:
status = ixgbe_init_ops_X550EM_a(hw);
break;
+ case ixgbe_mac_E610:
+ status = ixgbe_init_ops_E610(hw);
+ break;
case ixgbe_mac_82599_vf:
case ixgbe_mac_X540_vf:
case ixgbe_mac_X550_vf:
case ixgbe_mac_X550EM_x_vf:
case ixgbe_mac_X550EM_a_vf:
+ case ixgbe_mac_E610_vf:
status = ixgbe_init_ops_vf(hw);
break;
default:
@@ -240,6 +244,18 @@
hw->mac.type = ixgbe_mac_X550EM_a_vf;
hw->mvals = ixgbe_mvals_X550EM_a;
break;
+ case IXGBE_DEV_ID_E610_BACKPLANE:
+ case IXGBE_DEV_ID_E610_SFP:
+ case IXGBE_DEV_ID_E610_10G_T:
+ case IXGBE_DEV_ID_E610_2_5G_T:
+ case IXGBE_DEV_ID_E610_SGMII:
+ hw->mac.type = ixgbe_mac_E610;
+ hw->mvals = ixgbe_mvals_X550EM_a;
+ break;
+ case IXGBE_DEV_ID_E610_VF:
+ hw->mac.type = ixgbe_mac_E610_vf;
+ hw->mvals = ixgbe_mvals_X550EM_a;
+ break;
default:
ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED,
diff --git a/sys/dev/ixgbe/ixgbe_common.c b/sys/dev/ixgbe/ixgbe_common.c
--- a/sys/dev/ixgbe/ixgbe_common.c
+++ b/sys/dev/ixgbe/ixgbe_common.c
@@ -178,6 +178,7 @@
case IXGBE_DEV_ID_X550EM_A_SFP_N:
case IXGBE_DEV_ID_X550EM_A_QSFP:
case IXGBE_DEV_ID_X550EM_A_QSFP_N:
+ case IXGBE_DEV_ID_E610_SFP:
supported = false;
break;
default:
@@ -210,6 +211,8 @@
case IXGBE_DEV_ID_X550EM_A_10G_T:
case IXGBE_DEV_ID_X550EM_A_1G_T:
case IXGBE_DEV_ID_X550EM_A_1G_T_L:
+ case IXGBE_DEV_ID_E610_10G_T:
+ case IXGBE_DEV_ID_E610_2_5G_T:
supported = true;
break;
default:
@@ -616,7 +619,8 @@
}
}
- if (hw->mac.type == ixgbe_mac_X550 || hw->mac.type == ixgbe_mac_X540) {
+ if (hw->mac.type == ixgbe_mac_X540 ||
+ hw->mac.type == ixgbe_mac_X550) {
if (hw->phy.id == 0)
ixgbe_identify_phy(hw);
hw->phy.ops.read_reg(hw, IXGBE_PCRC8ECL,
@@ -1037,6 +1041,9 @@
case IXGBE_PCI_LINK_SPEED_8000:
hw->bus.speed = ixgbe_bus_speed_8000;
break;
+ case IXGBE_PCI_LINK_SPEED_16000:
+ hw->bus.speed = ixgbe_bus_speed_16000;
+ break;
default:
hw->bus.speed = ixgbe_bus_speed_unknown;
break;
@@ -1059,7 +1066,9 @@
DEBUGFUNC("ixgbe_get_bus_info_generic");
/* Get the negotiated link width and speed from PCI config space */
- link_status = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_LINK_STATUS);
+ link_status = IXGBE_READ_PCIE_WORD(hw, hw->mac.type == ixgbe_mac_E610 ?
+ IXGBE_PCI_LINK_STATUS_E610 :
+ IXGBE_PCI_LINK_STATUS);
ixgbe_set_pci_config_data_generic(hw, link_status);
@@ -1878,7 +1887,6 @@
DEBUGFUNC("ixgbe_get_eeprom_semaphore");
-
/* Get SMBI software semaphore between device drivers first */
for (i = 0; i < timeout; i++) {
/*
@@ -3363,7 +3371,6 @@
DEBUGFUNC("ixgbe_disable_sec_rx_path_generic");
-
secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
@@ -3692,6 +3699,10 @@
pcie_offset = IXGBE_PCIE_MSIX_82599_CAPS;
max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599;
break;
+ case ixgbe_mac_E610:
+ pcie_offset = IXGBE_PCIE_MSIX_LKV_CAPS;
+ max_msix_count = IXGBE_MAX_MSIX_VECTORS_82599;
+ break;
default:
return msix_count;
}
@@ -4139,7 +4150,6 @@
return IXGBE_SUCCESS;
}
-
/**
* ixgbe_toggle_txdctl_generic - Toggle VF's queues
* @hw: pointer to hardware structure
@@ -4323,7 +4333,8 @@
break;
case IXGBE_LINKS_SPEED_100_82599:
*speed = IXGBE_LINK_SPEED_100_FULL;
- if (hw->mac.type == ixgbe_mac_X550) {
+ if (hw->mac.type == ixgbe_mac_X550 ||
+ hw->mac.type == ixgbe_mac_E610) {
if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
*speed = IXGBE_LINK_SPEED_5GB_FULL;
}
@@ -5494,6 +5505,7 @@
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
case ixgbe_mac_X550EM_a:
+ case ixgbe_mac_E610:
/* version of eeprom section */
if (ixgbe_read_eeprom(hw, NVM_EEP_OFFSET_X540, &word))
word = NVM_VER_INVALID;
@@ -5512,6 +5524,7 @@
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
case ixgbe_mac_X550EM_a:
+ case ixgbe_mac_E610:
/* intel phy firmware version */
if (ixgbe_read_eeprom(hw, NVM_EEP_PHY_OFF_X540, &word))
word = NVM_VER_INVALID;
diff --git a/sys/dev/ixgbe/ixgbe_e610.h b/sys/dev/ixgbe/ixgbe_e610.h
new file mode 100644
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_e610.h
@@ -0,0 +1,224 @@
+/******************************************************************************
+ SPDX-License-Identifier: BSD-3-Clause
+
+ Copyright (c) 2025, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+
+#ifndef _IXGBE_E610_H_
+#define _IXGBE_E610_H_
+
+#include "ixgbe_type.h"
+
+void ixgbe_init_aci(struct ixgbe_hw *hw);
+void ixgbe_shutdown_aci(struct ixgbe_hw *hw);
+s32 ixgbe_aci_send_cmd(struct ixgbe_hw *hw, struct ixgbe_aci_desc *desc,
+ void *buf, u16 buf_size);
+bool ixgbe_aci_check_event_pending(struct ixgbe_hw *hw);
+s32 ixgbe_aci_get_event(struct ixgbe_hw *hw, struct ixgbe_aci_event *e,
+ bool *pending);
+
+void ixgbe_fill_dflt_direct_cmd_desc(struct ixgbe_aci_desc *desc, u16 opcode);
+
+s32 ixgbe_aci_get_fw_ver(struct ixgbe_hw *hw);
+s32 ixgbe_aci_send_driver_ver(struct ixgbe_hw *hw, struct ixgbe_driver_ver *dv);
+s32 ixgbe_aci_set_pf_context(struct ixgbe_hw *hw, u8 pf_id);
+
+s32 ixgbe_acquire_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res,
+ enum ixgbe_aci_res_access_type access, u32 timeout);
+void ixgbe_release_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res);
+s32 ixgbe_aci_list_caps(struct ixgbe_hw *hw, void *buf, u16 buf_size,
+ u32 *cap_count, enum ixgbe_aci_opc opc);
+s32 ixgbe_discover_dev_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_dev_caps *dev_caps);
+s32 ixgbe_discover_func_caps(struct ixgbe_hw* hw,
+ struct ixgbe_hw_func_caps* func_caps);
+s32 ixgbe_get_caps(struct ixgbe_hw *hw);
+s32 ixgbe_aci_disable_rxen(struct ixgbe_hw *hw);
+s32 ixgbe_aci_get_phy_caps(struct ixgbe_hw *hw, bool qual_mods, u8 report_mode,
+ struct ixgbe_aci_cmd_get_phy_caps_data *pcaps);
+bool ixgbe_phy_caps_equals_cfg(struct ixgbe_aci_cmd_get_phy_caps_data *caps,
+ struct ixgbe_aci_cmd_set_phy_cfg_data *cfg);
+void ixgbe_copy_phy_caps_to_cfg(struct ixgbe_aci_cmd_get_phy_caps_data *caps,
+ struct ixgbe_aci_cmd_set_phy_cfg_data *cfg);
+s32 ixgbe_aci_set_phy_cfg(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_set_phy_cfg_data *cfg);
+s32 ixgbe_aci_set_link_restart_an(struct ixgbe_hw *hw, bool ena_link);
+s32 ixgbe_update_link_info(struct ixgbe_hw *hw);
+s32 ixgbe_get_link_status(struct ixgbe_hw *hw, bool *link_up);
+s32 ixgbe_aci_get_link_info(struct ixgbe_hw *hw, bool ena_lse,
+ struct ixgbe_link_status *link);
+s32 ixgbe_aci_set_event_mask(struct ixgbe_hw *hw, u8 port_num, u16 mask);
+s32 ixgbe_configure_lse(struct ixgbe_hw *hw, bool activate, u16 mask);
+
+s32 ixgbe_aci_get_netlist_node(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_get_link_topo *cmd,
+ u8 *node_part_number, u16 *node_handle);
+s32 ixgbe_find_netlist_node(struct ixgbe_hw *hw, u8 node_type_ctx,
+ u8 node_part_number, u16 *node_handle);
+s32 ixgbe_aci_read_i2c(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_link_topo_addr topo_addr,
+ u16 bus_addr, __le16 addr, u8 params, u8 *data);
+s32 ixgbe_aci_write_i2c(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_link_topo_addr topo_addr,
+ u16 bus_addr, __le16 addr, u8 params, u8 *data);
+
+s32 ixgbe_aci_set_port_id_led(struct ixgbe_hw *hw, bool orig_mode);
+s32 ixgbe_aci_set_gpio(struct ixgbe_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+ bool value);
+s32 ixgbe_aci_get_gpio(struct ixgbe_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+ bool *value);
+s32 ixgbe_aci_sff_eeprom(struct ixgbe_hw *hw, u16 lport, u8 bus_addr,
+ u16 mem_addr, u8 page, u8 page_bank_ctrl, u8 *data,
+ u8 length, bool write);
+s32 ixgbe_aci_prog_topo_dev_nvm(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_link_topo_params *topo_params);
+s32 ixgbe_aci_read_topo_dev_nvm(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_link_topo_params *topo_params,
+ u32 start_address, u8 *data, u8 data_size);
+
+s32 ixgbe_acquire_nvm(struct ixgbe_hw *hw,
+ enum ixgbe_aci_res_access_type access);
+void ixgbe_release_nvm(struct ixgbe_hw *hw);
+
+s32 ixgbe_aci_read_nvm(struct ixgbe_hw *hw, u16 module_typeid, u32 offset,
+ u16 length, void *data, bool last_command,
+ bool read_shadow_ram);
+
+s32 ixgbe_aci_erase_nvm(struct ixgbe_hw *hw, u16 module_typeid);
+s32 ixgbe_aci_update_nvm(struct ixgbe_hw *hw, u16 module_typeid,
+ u32 offset, u16 length, void *data,
+ bool last_command, u8 command_flags);
+
+s32 ixgbe_aci_read_nvm_cfg(struct ixgbe_hw *hw, u8 cmd_flags,
+ u16 field_id, void *data, u16 buf_size,
+ u16 *elem_count);
+s32 ixgbe_aci_write_nvm_cfg(struct ixgbe_hw *hw, u8 cmd_flags,
+ void *data, u16 buf_size, u16 elem_count);
+
+s32 ixgbe_nvm_validate_checksum(struct ixgbe_hw *hw);
+s32 ixgbe_nvm_recalculate_checksum(struct ixgbe_hw *hw);
+
+s32 ixgbe_nvm_write_activate(struct ixgbe_hw *hw, u16 cmd_flags,
+ u8 *response_flags);
+
+s32 ixgbe_get_nvm_minsrevs(struct ixgbe_hw *hw, struct ixgbe_minsrev_info *minsrevs);
+s32 ixgbe_update_nvm_minsrevs(struct ixgbe_hw *hw, struct ixgbe_minsrev_info *minsrevs);
+
+s32 ixgbe_get_inactive_nvm_ver(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm);
+s32 ixgbe_get_active_nvm_ver(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm);
+
+s32 ixgbe_get_inactive_netlist_ver(struct ixgbe_hw *hw, struct ixgbe_netlist_info *netlist);
+s32 ixgbe_init_nvm(struct ixgbe_hw *hw);
+
+s32 ixgbe_sanitize_operate(struct ixgbe_hw *hw);
+s32 ixgbe_sanitize_nvm(struct ixgbe_hw *hw, u8 cmd_flags, u8 *values);
+
+s32 ixgbe_read_sr_word_aci(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_sr_buf_aci(struct ixgbe_hw *hw, u16 offset, u16 *words, u16 *data);
+s32 ixgbe_read_flat_nvm(struct ixgbe_hw *hw, u32 offset, u32 *length,
+ u8 *data, bool read_shadow_ram);
+
+s32 ixgbe_write_sr_word_aci(struct ixgbe_hw *hw, u32 offset, const u16 *data);
+s32 ixgbe_write_sr_buf_aci(struct ixgbe_hw *hw, u32 offset, u16 words, const u16 *data);
+
+s32 ixgbe_aci_alternate_write(struct ixgbe_hw *hw, u32 reg_addr0,
+ u32 reg_val0, u32 reg_addr1, u32 reg_val1);
+s32 ixgbe_aci_alternate_read(struct ixgbe_hw *hw, u32 reg_addr0,
+ u32 *reg_val0, u32 reg_addr1, u32 *reg_val1);
+s32 ixgbe_aci_alternate_write_done(struct ixgbe_hw *hw, u8 bios_mode,
+ bool *reset_needed);
+s32 ixgbe_aci_alternate_clear(struct ixgbe_hw *hw);
+
+s32 ixgbe_aci_get_internal_data(struct ixgbe_hw *hw, u16 cluster_id,
+ u16 table_id, u32 start, void *buf,
+ u16 buf_size, u16 *ret_buf_size,
+ u16 *ret_next_cluster, u16 *ret_next_table,
+ u32 *ret_next_index);
+
+s32 ixgbe_handle_nvm_access(struct ixgbe_hw *hw,
+ struct ixgbe_nvm_access_cmd *cmd,
+ struct ixgbe_nvm_access_data *data);
+
+s32 ixgbe_aci_set_health_status_config(struct ixgbe_hw *hw, u8 event_source);
+
+/* E610 operations */
+s32 ixgbe_init_ops_E610(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw_E610(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_E610(struct ixgbe_hw *hw);
+enum ixgbe_media_type ixgbe_get_media_type_E610(struct ixgbe_hw *hw);
+u64 ixgbe_get_supported_physical_layer_E610(struct ixgbe_hw *hw);
+s32 ixgbe_setup_link_E610(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait);
+s32 ixgbe_check_link_E610(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_get_link_capabilities_E610(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
+s32 ixgbe_cfg_phy_fc(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_set_phy_cfg_data *cfg,
+ enum ixgbe_fc_mode req_mode);
+s32 ixgbe_setup_fc_E610(struct ixgbe_hw *hw);
+void ixgbe_fc_autoneg_E610(struct ixgbe_hw *hw);
+s32 ixgbe_set_fw_drv_ver_E610(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
+ u8 sub, u16 len, const char *driver_ver);
+void ixgbe_disable_rx_E610(struct ixgbe_hw *hw);
+s32 ixgbe_setup_eee_E610(struct ixgbe_hw *hw, bool enable_eee);
+bool ixgbe_fw_recovery_mode_E610(struct ixgbe_hw *hw);
+bool ixgbe_fw_rollback_mode_E610(struct ixgbe_hw *hw);
+bool ixgbe_get_fw_tsam_mode_E610(struct ixgbe_hw *hw);
+s32 ixgbe_init_phy_ops_E610(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_E610(struct ixgbe_hw *hw);
+s32 ixgbe_identify_module_E610(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_link_E610(struct ixgbe_hw *hw);
+s32 ixgbe_get_phy_firmware_version_E610(struct ixgbe_hw *hw,
+ u16 *firmware_version);
+s32 ixgbe_read_i2c_sff8472_E610(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data);
+s32 ixgbe_read_i2c_eeprom_E610(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data);
+s32 ixgbe_write_i2c_eeprom_E610(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data);
+s32 ixgbe_check_overtemp_E610(struct ixgbe_hw *hw);
+s32 ixgbe_set_phy_power_E610(struct ixgbe_hw *hw, bool on);
+s32 ixgbe_enter_lplu_E610(struct ixgbe_hw *hw);
+s32 ixgbe_init_eeprom_params_E610(struct ixgbe_hw *hw);
+s32 ixgbe_read_ee_aci_E610(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_ee_aci_buffer_E610(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_write_ee_aci_E610(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_ee_aci_buffer_E610(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_calc_eeprom_checksum_E610(struct ixgbe_hw *hw);
+s32 ixgbe_update_eeprom_checksum_E610(struct ixgbe_hw *hw);
+s32 ixgbe_validate_eeprom_checksum_E610(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_read_pba_string_E610(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size);
+
+#endif /* _IXGBE_E610_H_ */
diff --git a/sys/dev/ixgbe/ixgbe_e610.c b/sys/dev/ixgbe/ixgbe_e610.c
new file mode 100644
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_e610.c
@@ -0,0 +1,5567 @@
+/******************************************************************************
+ SPDX-License-Identifier: BSD-3-Clause
+
+ Copyright (c) 2025, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+
+#include "ixgbe_type.h"
+#include "ixgbe_e610.h"
+#include "ixgbe_x550.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+#include "ixgbe_api.h"
+
+/**
+ * ixgbe_init_aci - initialization routine for Admin Command Interface
+ * @hw: pointer to the hardware structure
+ *
+ * Initialize the ACI lock.
+ */
+void ixgbe_init_aci(struct ixgbe_hw *hw)
+{
+ ixgbe_init_lock(&hw->aci.lock);
+}
+
+/**
+ * ixgbe_shutdown_aci - shutdown routine for Admin Command Interface
+ * @hw: pointer to the hardware structure
+ *
+ * Destroy the ACI lock.
+ */
+void ixgbe_shutdown_aci(struct ixgbe_hw *hw)
+{
+ ixgbe_destroy_lock(&hw->aci.lock);
+}
+
+/**
+ * ixgbe_should_retry_aci_send_cmd_execute - decide if ACI command should
+ * be resent
+ * @opcode: ACI opcode
+ *
+ * Check if ACI command should be sent again depending on the provided opcode.
+ *
+ * Return: true if the sending command routine should be repeated,
+ * otherwise false.
+ */
+static bool ixgbe_should_retry_aci_send_cmd_execute(u16 opcode)
+{
+ switch (opcode) {
+ case ixgbe_aci_opc_disable_rxen:
+ case ixgbe_aci_opc_get_phy_caps:
+ case ixgbe_aci_opc_get_link_status:
+ case ixgbe_aci_opc_get_link_topo:
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * ixgbe_aci_send_cmd_execute - execute sending FW Admin Command to FW Admin
+ * Command Interface
+ * @hw: pointer to the HW struct
+ * @desc: descriptor describing the command
+ * @buf: buffer to use for indirect commands (NULL for direct commands)
+ * @buf_size: size of buffer for indirect commands (0 for direct commands)
+ *
+ * Admin Command is sent using CSR by setting descriptor and buffer in specific
+ * registers.
+ *
+ * Return: the exit code of the operation.
+ * * - IXGBE_SUCCESS - success.
+ * * - IXGBE_ERR_ACI_DISABLED - CSR mechanism is not enabled.
+ * * - IXGBE_ERR_ACI_BUSY - CSR mechanism is busy.
+ * * - IXGBE_ERR_PARAM - buf_size is too big or
+ * invalid argument buf or buf_size.
+ * * - IXGBE_ERR_ACI_TIMEOUT - Admin Command X command timeout.
+ * * - IXGBE_ERR_ACI_ERROR - Admin Command X invalid state of HICR register or
+ * Admin Command failed because of bad opcode was returned or
+ * Admin Command failed with error Y.
+ */
+static s32
+ixgbe_aci_send_cmd_execute(struct ixgbe_hw *hw, struct ixgbe_aci_desc *desc,
+ void *buf, u16 buf_size)
+{
+ u32 hicr = 0, tmp_buf_size = 0, i = 0;
+ u32 *raw_desc = (u32 *)desc;
+ s32 status = IXGBE_SUCCESS;
+ bool valid_buf = false;
+ u32 *tmp_buf = NULL;
+ u16 opcode = 0;
+
+ do {
+ hw->aci.last_status = IXGBE_ACI_RC_OK;
+
+ /* It's necessary to check if mechanism is enabled */
+ hicr = IXGBE_READ_REG(hw, PF_HICR);
+ if (!(hicr & PF_HICR_EN)) {
+ status = IXGBE_ERR_ACI_DISABLED;
+ break;
+ }
+ if (hicr & PF_HICR_C) {
+ hw->aci.last_status = IXGBE_ACI_RC_EBUSY;
+ status = IXGBE_ERR_ACI_BUSY;
+ break;
+ }
+ opcode = desc->opcode;
+
+ if (buf_size > IXGBE_ACI_MAX_BUFFER_SIZE) {
+ status = IXGBE_ERR_PARAM;
+ break;
+ }
+
+ if (buf)
+ desc->flags |= IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_BUF);
+
+ /* Check if buf and buf_size are proper params */
+ if (desc->flags & IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_BUF)) {
+ if ((buf && buf_size == 0) ||
+ (buf == NULL && buf_size)) {
+ status = IXGBE_ERR_PARAM;
+ break;
+ }
+ if (buf && buf_size)
+ valid_buf = true;
+ }
+
+ if (valid_buf == true) {
+ if (buf_size % 4 == 0)
+ tmp_buf_size = buf_size;
+ else
+ tmp_buf_size = (buf_size & (u16)(~0x03)) + 4;
+
+ tmp_buf = (u32*)ixgbe_malloc(hw, tmp_buf_size);
+ if (!tmp_buf)
+ return IXGBE_ERR_OUT_OF_MEM;
+
+ /* tmp_buf will be firstly filled with 0xFF and after
+ * that the content of buf will be written into it.
+ * This approach lets us use valid buf_size and
+ * prevents us from reading past buf area
+ * when buf_size mod 4 not equal to 0.
+ */
+ memset(tmp_buf, 0xFF, tmp_buf_size);
+ memcpy(tmp_buf, buf, buf_size);
+
+ if (tmp_buf_size > IXGBE_ACI_LG_BUF)
+ desc->flags |=
+ IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_LB);
+
+ desc->datalen = IXGBE_CPU_TO_LE16(buf_size);
+
+ if (desc->flags & IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_RD)) {
+ for (i = 0; i < tmp_buf_size / 4; i++) {
+ IXGBE_WRITE_REG(hw, PF_HIBA(i),
+ IXGBE_LE32_TO_CPU(tmp_buf[i]));
+ }
+ }
+ }
+
+ /* Descriptor is written to specific registers */
+ for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++)
+ IXGBE_WRITE_REG(hw, PF_HIDA(i),
+ IXGBE_LE32_TO_CPU(raw_desc[i]));
+
+ /* SW has to set PF_HICR.C bit and clear PF_HICR.SV and
+ * PF_HICR_EV
+ */
+ hicr = IXGBE_READ_REG(hw, PF_HICR);
+ hicr = (hicr | PF_HICR_C) & ~(PF_HICR_SV | PF_HICR_EV);
+ IXGBE_WRITE_REG(hw, PF_HICR, hicr);
+
+ /* Wait for sync Admin Command response */
+ for (i = 0; i < IXGBE_ACI_SYNC_RESPONSE_TIMEOUT; i += 1) {
+ hicr = IXGBE_READ_REG(hw, PF_HICR);
+ if ((hicr & PF_HICR_SV) || !(hicr & PF_HICR_C))
+ break;
+
+ msec_delay(1);
+ }
+
+ /* Wait for async Admin Command response */
+ if ((hicr & PF_HICR_SV) && (hicr & PF_HICR_C)) {
+ for (i = 0; i < IXGBE_ACI_ASYNC_RESPONSE_TIMEOUT;
+ i += 1) {
+ hicr = IXGBE_READ_REG(hw, PF_HICR);
+ if ((hicr & PF_HICR_EV) || !(hicr & PF_HICR_C))
+ break;
+
+ msec_delay(1);
+ }
+ }
+
+ /* Read sync Admin Command response */
+ if ((hicr & PF_HICR_SV)) {
+ for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) {
+ raw_desc[i] = IXGBE_READ_REG(hw, PF_HIDA(i));
+ raw_desc[i] = IXGBE_CPU_TO_LE32(raw_desc[i]);
+ }
+ }
+
+ /* Read async Admin Command response */
+ if ((hicr & PF_HICR_EV) && !(hicr & PF_HICR_C)) {
+ for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) {
+ raw_desc[i] = IXGBE_READ_REG(hw, PF_HIDA_2(i));
+ raw_desc[i] = IXGBE_CPU_TO_LE32(raw_desc[i]);
+ }
+ }
+
+ /* Handle timeout and invalid state of HICR register */
+ if (hicr & PF_HICR_C) {
+ status = IXGBE_ERR_ACI_TIMEOUT;
+ break;
+ } else if (!(hicr & PF_HICR_SV) && !(hicr & PF_HICR_EV)) {
+ status = IXGBE_ERR_ACI_ERROR;
+ break;
+ }
+
+ /* For every command other than 0x0014 treat opcode mismatch
+ * as an error. Response to 0x0014 command read from HIDA_2
+ * is a descriptor of an event which is expected to contain
+ * different opcode than the command.
+ */
+ if (desc->opcode != opcode &&
+ opcode != IXGBE_CPU_TO_LE16(ixgbe_aci_opc_get_fw_event)) {
+ status = IXGBE_ERR_ACI_ERROR;
+ break;
+ }
+
+ if (desc->retval != IXGBE_ACI_RC_OK) {
+ hw->aci.last_status = (enum ixgbe_aci_err)desc->retval;
+ status = IXGBE_ERR_ACI_ERROR;
+ break;
+ }
+
+ /* Write a response values to a buf */
+ if (valid_buf && (desc->flags &
+ IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_BUF))) {
+ for (i = 0; i < tmp_buf_size / 4; i++) {
+ tmp_buf[i] = IXGBE_READ_REG(hw, PF_HIBA(i));
+ tmp_buf[i] = IXGBE_CPU_TO_LE32(tmp_buf[i]);
+ }
+ memcpy(buf, tmp_buf, buf_size);
+ }
+ } while (0);
+
+ if (tmp_buf)
+ ixgbe_free(hw, tmp_buf);
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_send_cmd - send FW Admin Command to FW Admin Command Interface
+ * @hw: pointer to the HW struct
+ * @desc: descriptor describing the command
+ * @buf: buffer to use for indirect commands (NULL for direct commands)
+ * @buf_size: size of buffer for indirect commands (0 for direct commands)
+ *
+ * Helper function to send FW Admin Commands to the FW Admin Command Interface.
+ *
+ * Retry sending the FW Admin Command multiple times to the FW ACI
+ * if the EBUSY Admin Command error is returned.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_send_cmd(struct ixgbe_hw *hw, struct ixgbe_aci_desc *desc,
+ void *buf, u16 buf_size)
+{
+ struct ixgbe_aci_desc desc_cpy;
+ enum ixgbe_aci_err last_status;
+ bool is_cmd_for_retry;
+ u8 *buf_cpy = NULL;
+ s32 status;
+ u16 opcode;
+ u8 idx = 0;
+
+ opcode = IXGBE_LE16_TO_CPU(desc->opcode);
+ is_cmd_for_retry = ixgbe_should_retry_aci_send_cmd_execute(opcode);
+ memset(&desc_cpy, 0, sizeof(desc_cpy));
+
+ if (is_cmd_for_retry) {
+ if (buf) {
+ buf_cpy = (u8 *)ixgbe_malloc(hw, buf_size);
+ if (!buf_cpy)
+ return IXGBE_ERR_OUT_OF_MEM;
+ }
+ memcpy(&desc_cpy, desc, sizeof(desc_cpy));
+ }
+
+ do {
+ ixgbe_acquire_lock(&hw->aci.lock);
+ status = ixgbe_aci_send_cmd_execute(hw, desc, buf, buf_size);
+ last_status = hw->aci.last_status;
+ ixgbe_release_lock(&hw->aci.lock);
+
+ if (!is_cmd_for_retry || status == IXGBE_SUCCESS ||
+ (last_status != IXGBE_ACI_RC_EBUSY && status != IXGBE_ERR_ACI_ERROR))
+ break;
+
+ if (buf)
+ memcpy(buf, buf_cpy, buf_size);
+ memcpy(desc, &desc_cpy, sizeof(desc_cpy));
+
+ msec_delay(IXGBE_ACI_SEND_DELAY_TIME_MS);
+ } while (++idx < IXGBE_ACI_SEND_MAX_EXECUTE);
+
+ if (buf_cpy)
+ ixgbe_free(hw, buf_cpy);
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_check_event_pending - check if there are any pending events
+ * @hw: pointer to the HW struct
+ *
+ * Determine if there are any pending events.
+ *
+ * Return: true if there are any currently pending events
+ * otherwise false.
+ */
+bool ixgbe_aci_check_event_pending(struct ixgbe_hw *hw)
+{
+ u32 ep_bit_mask;
+ u32 fwsts;
+
+ ep_bit_mask = hw->bus.func ? GL_FWSTS_EP_PF1 : GL_FWSTS_EP_PF0;
+
+ /* Check state of Event Pending (EP) bit */
+ fwsts = IXGBE_READ_REG(hw, GL_FWSTS);
+ return (fwsts & ep_bit_mask) ? true : false;
+}
+
+/**
+ * ixgbe_aci_get_event - get an event from ACI
+ * @hw: pointer to the HW struct
+ * @e: event information structure
+ * @pending: optional flag signaling that there are more pending events
+ *
+ * Obtain an event from ACI and return its content
+ * through 'e' using ACI command (0x0014).
+ * Provide information if there are more events
+ * to retrieve through 'pending'.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_event(struct ixgbe_hw *hw, struct ixgbe_aci_event *e,
+ bool *pending)
+{
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ if (!e || (!e->msg_buf && e->buf_len) || (e->msg_buf && !e->buf_len))
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_acquire_lock(&hw->aci.lock);
+
+ /* Check if there are any events pending */
+ if (!ixgbe_aci_check_event_pending(hw)) {
+ status = IXGBE_ERR_ACI_NO_EVENTS;
+ goto aci_get_event_exit;
+ }
+
+ /* Obtain pending event */
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_fw_event);
+ status = ixgbe_aci_send_cmd_execute(hw, &desc, e->msg_buf, e->buf_len);
+ if (status)
+ goto aci_get_event_exit;
+
+ /* Returned 0x0014 opcode indicates that no event was obtained */
+ if (desc.opcode == IXGBE_CPU_TO_LE16(ixgbe_aci_opc_get_fw_event)) {
+ status = IXGBE_ERR_ACI_NO_EVENTS;
+ goto aci_get_event_exit;
+ }
+
+ /* Determine size of event data */
+ e->msg_len = MIN_T(u16, IXGBE_LE16_TO_CPU(desc.datalen), e->buf_len);
+ /* Write event descriptor to event info structure */
+ memcpy(&e->desc, &desc, sizeof(e->desc));
+
+ /* Check if there are any further events pending */
+ if (pending) {
+ *pending = ixgbe_aci_check_event_pending(hw);
+ }
+
+aci_get_event_exit:
+ ixgbe_release_lock(&hw->aci.lock);
+
+ return status;
+}
+
+/**
+ * ixgbe_fill_dflt_direct_cmd_desc - fill ACI descriptor with default values.
+ * @desc: pointer to the temp descriptor (non DMA mem)
+ * @opcode: the opcode can be used to decide which flags to turn off or on
+ *
+ * Helper function to fill the descriptor desc with default values
+ * and the provided opcode.
+ */
+void ixgbe_fill_dflt_direct_cmd_desc(struct ixgbe_aci_desc *desc, u16 opcode)
+{
+ /* zero out the desc */
+ memset(desc, 0, sizeof(*desc));
+ desc->opcode = IXGBE_CPU_TO_LE16(opcode);
+ desc->flags = IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_SI);
+}
+
+/**
+ * ixgbe_aci_get_fw_ver - get the firmware version
+ * @hw: pointer to the HW struct
+ *
+ * Get the firmware version using ACI command (0x0001).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_fw_ver(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_ver *resp;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ resp = &desc.params.get_ver;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_ver);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ if (!status) {
+ hw->fw_branch = resp->fw_branch;
+ hw->fw_maj_ver = resp->fw_major;
+ hw->fw_min_ver = resp->fw_minor;
+ hw->fw_patch = resp->fw_patch;
+ hw->fw_build = IXGBE_LE32_TO_CPU(resp->fw_build);
+ hw->api_branch = resp->api_branch;
+ hw->api_maj_ver = resp->api_major;
+ hw->api_min_ver = resp->api_minor;
+ hw->api_patch = resp->api_patch;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_send_driver_ver - send the driver version to firmware
+ * @hw: pointer to the HW struct
+ * @dv: driver's major, minor version
+ *
+ * Send the driver version to the firmware
+ * using the ACI command (0x0002).
+ *
+ * Return: the exit code of the operation.
+ * Returns IXGBE_ERR_PARAM, if dv is NULL.
+ */
+s32 ixgbe_aci_send_driver_ver(struct ixgbe_hw *hw, struct ixgbe_driver_ver *dv)
+{
+ struct ixgbe_aci_cmd_driver_ver *cmd;
+ struct ixgbe_aci_desc desc;
+ u16 len;
+
+ cmd = &desc.params.driver_ver;
+
+ if (!dv)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_driver_ver);
+
+ desc.flags |= IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_RD);
+ cmd->major_ver = dv->major_ver;
+ cmd->minor_ver = dv->minor_ver;
+ cmd->build_ver = dv->build_ver;
+ cmd->subbuild_ver = dv->subbuild_ver;
+
+ len = 0;
+ while (len < sizeof(dv->driver_string) &&
+ IS_ASCII(dv->driver_string[len]) && dv->driver_string[len])
+ len++;
+
+ return ixgbe_aci_send_cmd(hw, &desc, dv->driver_string, len);
+}
+
+/**
+ * ixgbe_aci_req_res - request a common resource
+ * @hw: pointer to the HW struct
+ * @res: resource ID
+ * @access: access type
+ * @sdp_number: resource number
+ * @timeout: the maximum time in ms that the driver may hold the resource
+ *
+ * Requests a common resource using the ACI command (0x0008).
+ * Specifies the maximum time the driver may hold the resource.
+ * If the requested resource is currently occupied by some other driver,
+ * a busy return value is returned and the timeout field value indicates the
+ * maximum time the current owner has to free it.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32
+ixgbe_aci_req_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res,
+ enum ixgbe_aci_res_access_type access, u8 sdp_number,
+ u32 *timeout)
+{
+ struct ixgbe_aci_cmd_req_res *cmd_resp;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd_resp = &desc.params.res_owner;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_req_res);
+
+ cmd_resp->res_id = IXGBE_CPU_TO_LE16(res);
+ cmd_resp->access_type = IXGBE_CPU_TO_LE16(access);
+ cmd_resp->res_number = IXGBE_CPU_TO_LE32(sdp_number);
+ cmd_resp->timeout = IXGBE_CPU_TO_LE32(*timeout);
+ *timeout = 0;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ /* The completion specifies the maximum time in ms that the driver
+ * may hold the resource in the Timeout field.
+ * If the resource is held by some other driver, the command completes
+ * with a busy return value and the timeout field indicates the maximum
+ * time the current owner of the resource has to free it.
+ */
+ if (!status || hw->aci.last_status == IXGBE_ACI_RC_EBUSY)
+ *timeout = IXGBE_LE32_TO_CPU(cmd_resp->timeout);
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_release_res - release a common resource using ACI
+ * @hw: pointer to the HW struct
+ * @res: resource ID
+ * @sdp_number: resource number
+ *
+ * Release a common resource using ACI command (0x0009).
+ *
+ * Return: the exit code of the operation.
+ */
+static s32
+ixgbe_aci_release_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res,
+ u8 sdp_number)
+{
+ struct ixgbe_aci_cmd_req_res *cmd;
+ struct ixgbe_aci_desc desc;
+
+ cmd = &desc.params.res_owner;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_release_res);
+
+ cmd->res_id = IXGBE_CPU_TO_LE16(res);
+ cmd->res_number = IXGBE_CPU_TO_LE32(sdp_number);
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_acquire_res - acquire the ownership of a resource
+ * @hw: pointer to the HW structure
+ * @res: resource ID
+ * @access: access type (read or write)
+ * @timeout: timeout in milliseconds
+ *
+ * Make an attempt to acquire the ownership of a resource using
+ * the ixgbe_aci_req_res to utilize ACI.
+ * In case if some other driver has previously acquired the resource and
+ * performed any necessary updates, the IXGBE_ERR_ACI_NO_WORK is returned,
+ * and the caller does not obtain the resource and has no further work to do.
+ * If needed, the function will poll until the current lock owner timeouts.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_acquire_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res,
+ enum ixgbe_aci_res_access_type access, u32 timeout)
+{
+#define IXGBE_RES_POLLING_DELAY_MS 10
+ u32 delay = IXGBE_RES_POLLING_DELAY_MS;
+ u32 res_timeout = timeout;
+ u32 retry_timeout = 0;
+ s32 status;
+
+ status = ixgbe_aci_req_res(hw, res, access, 0, &res_timeout);
+
+ /* A return code of IXGBE_ERR_ACI_NO_WORK means that another driver has
+ * previously acquired the resource and performed any necessary updates;
+ * in this case the caller does not obtain the resource and has no
+ * further work to do.
+ */
+ if (status == IXGBE_ERR_ACI_NO_WORK)
+ goto ixgbe_acquire_res_exit;
+
+ /* If necessary, poll until the current lock owner timeouts.
+ * Set retry_timeout to the timeout value reported by the FW in the
+ * response to the "Request Resource Ownership" (0x0008) Admin Command
+ * as it indicates the maximum time the current owner of the resource
+ * is allowed to hold it.
+ */
+ retry_timeout = res_timeout;
+ while (status && retry_timeout && res_timeout) {
+ msec_delay(delay);
+ retry_timeout = (retry_timeout > delay) ?
+ retry_timeout - delay : 0;
+ status = ixgbe_aci_req_res(hw, res, access, 0, &res_timeout);
+
+ if (status == IXGBE_ERR_ACI_NO_WORK)
+ /* lock free, but no work to do */
+ break;
+
+ if (!status)
+ /* lock acquired */
+ break;
+ }
+
+ixgbe_acquire_res_exit:
+ return status;
+}
+
+/**
+ * ixgbe_release_res - release a common resource
+ * @hw: pointer to the HW structure
+ * @res: resource ID
+ *
+ * Release a common resource using ixgbe_aci_release_res.
+ */
+void ixgbe_release_res(struct ixgbe_hw *hw, enum ixgbe_aci_res_ids res)
+{
+ u32 total_delay = 0;
+ s32 status;
+
+ status = ixgbe_aci_release_res(hw, res, 0);
+
+ /* There are some rare cases when trying to release the resource
+ * results in an admin command timeout, so handle them correctly.
+ */
+ while ((status == IXGBE_ERR_ACI_TIMEOUT) &&
+ (total_delay < IXGBE_ACI_RELEASE_RES_TIMEOUT)) {
+ msec_delay(1);
+ status = ixgbe_aci_release_res(hw, res, 0);
+ total_delay++;
+ }
+}
+
+/**
+ * ixgbe_parse_common_caps - Parse common device/function capabilities
+ * @hw: pointer to the HW struct
+ * @caps: pointer to common capabilities structure
+ * @elem: the capability element to parse
+ * @prefix: message prefix for tracing capabilities
+ *
+ * Given a capability element, extract relevant details into the common
+ * capability structure.
+ *
+ * Return: true if the capability matches one of the common capability ids,
+ * false otherwise.
+ */
+static bool
+ixgbe_parse_common_caps(struct ixgbe_hw *hw, struct ixgbe_hw_common_caps *caps,
+ struct ixgbe_aci_cmd_list_caps_elem *elem,
+ const char *prefix)
+{
+ u32 logical_id = IXGBE_LE32_TO_CPU(elem->logical_id);
+ u32 phys_id = IXGBE_LE32_TO_CPU(elem->phys_id);
+ u32 number = IXGBE_LE32_TO_CPU(elem->number);
+ u16 cap = IXGBE_LE16_TO_CPU(elem->cap);
+ bool found = true;
+
+ UNREFERENCED_1PARAMETER(hw);
+
+ switch (cap) {
+ case IXGBE_ACI_CAPS_VALID_FUNCTIONS:
+ caps->valid_functions = number;
+ break;
+ case IXGBE_ACI_CAPS_SRIOV:
+ caps->sr_iov_1_1 = (number == 1);
+ break;
+ case IXGBE_ACI_CAPS_VMDQ:
+ caps->vmdq = (number == 1);
+ break;
+ case IXGBE_ACI_CAPS_DCB:
+ caps->dcb = (number == 1);
+ caps->active_tc_bitmap = logical_id;
+ caps->maxtc = phys_id;
+ break;
+ case IXGBE_ACI_CAPS_RSS:
+ caps->rss_table_size = number;
+ caps->rss_table_entry_width = logical_id;
+ break;
+ case IXGBE_ACI_CAPS_RXQS:
+ caps->num_rxq = number;
+ caps->rxq_first_id = phys_id;
+ break;
+ case IXGBE_ACI_CAPS_TXQS:
+ caps->num_txq = number;
+ caps->txq_first_id = phys_id;
+ break;
+ case IXGBE_ACI_CAPS_MSIX:
+ caps->num_msix_vectors = number;
+ caps->msix_vector_first_id = phys_id;
+ break;
+ case IXGBE_ACI_CAPS_NVM_VER:
+ break;
+ case IXGBE_ACI_CAPS_NVM_MGMT:
+ caps->sec_rev_disabled =
+ (number & IXGBE_NVM_MGMT_SEC_REV_DISABLED) ?
+ true : false;
+ caps->update_disabled =
+ (number & IXGBE_NVM_MGMT_UPDATE_DISABLED) ?
+ true : false;
+ caps->nvm_unified_update =
+ (number & IXGBE_NVM_MGMT_UNIFIED_UPD_SUPPORT) ?
+ true : false;
+ caps->netlist_auth =
+ (number & IXGBE_NVM_MGMT_NETLIST_AUTH_SUPPORT) ?
+ true : false;
+ break;
+ case IXGBE_ACI_CAPS_MAX_MTU:
+ caps->max_mtu = number;
+ break;
+ case IXGBE_ACI_CAPS_PCIE_RESET_AVOIDANCE:
+ caps->pcie_reset_avoidance = (number > 0);
+ break;
+ case IXGBE_ACI_CAPS_POST_UPDATE_RESET_RESTRICT:
+ caps->reset_restrict_support = (number == 1);
+ break;
+ case IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG0:
+ case IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG1:
+ case IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG2:
+ case IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG3:
+ {
+ u8 index = cap - IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG0;
+
+ caps->ext_topo_dev_img_ver_high[index] = number;
+ caps->ext_topo_dev_img_ver_low[index] = logical_id;
+ caps->ext_topo_dev_img_part_num[index] =
+ (phys_id & IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_M) >>
+ IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_S;
+ caps->ext_topo_dev_img_load_en[index] =
+ (phys_id & IXGBE_EXT_TOPO_DEV_IMG_LOAD_EN) != 0;
+ caps->ext_topo_dev_img_prog_en[index] =
+ (phys_id & IXGBE_EXT_TOPO_DEV_IMG_PROG_EN) != 0;
+ break;
+ }
+ case IXGBE_ACI_CAPS_OROM_RECOVERY_UPDATE:
+ caps->orom_recovery_update = (number == 1);
+ break;
+ case IXGBE_ACI_CAPS_NEXT_CLUSTER_ID:
+ caps->next_cluster_id_support = (number == 1);
+ DEBUGOUT2("%s: next_cluster_id_support = %d\n",
+ prefix, caps->next_cluster_id_support);
+ break;
+ default:
+ /* Not one of the recognized common capabilities */
+ found = false;
+ }
+
+ return found;
+}
+
+/**
+ * ixgbe_hweight8 - count set bits among the 8 lowest bits
+ * @w: variable storing set bits to count
+ *
+ * Return: the number of set bits among the 8 lowest bits in the provided value.
+ */
+static u8 ixgbe_hweight8(u32 w)
+{
+ u8 hweight = 0, i;
+
+ for (i = 0; i < 8; i++)
+ if (w & (1 << i))
+ hweight++;
+
+ return hweight;
+}
+
+/**
+ * ixgbe_hweight32 - count set bits among the 32 lowest bits
+ * @w: variable storing set bits to count
+ *
+ * Return: the number of set bits among the 32 lowest bits in the
+ * provided value.
+ */
+static u8 ixgbe_hweight32(u32 w)
+{
+ u32 bitMask = 0x1, i;
+ u8 bitCnt = 0;
+
+ for (i = 0; i < 32; i++)
+ {
+ if (w & bitMask)
+ bitCnt++;
+
+ bitMask = bitMask << 0x1;
+ }
+
+ return bitCnt;
+}
+
+/**
+ * ixgbe_parse_valid_functions_cap - Parse IXGBE_ACI_CAPS_VALID_FUNCTIONS caps
+ * @hw: pointer to the HW struct
+ * @dev_p: pointer to device capabilities structure
+ * @cap: capability element to parse
+ *
+ * Parse IXGBE_ACI_CAPS_VALID_FUNCTIONS for device capabilities.
+ */
+static void
+ixgbe_parse_valid_functions_cap(struct ixgbe_hw *hw,
+ struct ixgbe_hw_dev_caps *dev_p,
+ struct ixgbe_aci_cmd_list_caps_elem *cap)
+{
+ u32 number = IXGBE_LE32_TO_CPU(cap->number);
+
+ UNREFERENCED_1PARAMETER(hw);
+
+ dev_p->num_funcs = ixgbe_hweight32(number);
+}
+
+/**
+ * ixgbe_parse_vf_dev_caps - Parse IXGBE_ACI_CAPS_VF device caps
+ * @hw: pointer to the HW struct
+ * @dev_p: pointer to device capabilities structure
+ * @cap: capability element to parse
+ *
+ * Parse IXGBE_ACI_CAPS_VF for device capabilities.
+ */
+static void ixgbe_parse_vf_dev_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_dev_caps *dev_p,
+ struct ixgbe_aci_cmd_list_caps_elem *cap)
+{
+ u32 number = IXGBE_LE32_TO_CPU(cap->number);
+
+ UNREFERENCED_1PARAMETER(hw);
+
+ dev_p->num_vfs_exposed = number;
+}
+
+/**
+ * ixgbe_parse_vsi_dev_caps - Parse IXGBE_ACI_CAPS_VSI device caps
+ * @hw: pointer to the HW struct
+ * @dev_p: pointer to device capabilities structure
+ * @cap: capability element to parse
+ *
+ * Parse IXGBE_ACI_CAPS_VSI for device capabilities.
+ */
+static void ixgbe_parse_vsi_dev_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_dev_caps *dev_p,
+ struct ixgbe_aci_cmd_list_caps_elem *cap)
+{
+ u32 number = IXGBE_LE32_TO_CPU(cap->number);
+
+ UNREFERENCED_1PARAMETER(hw);
+
+ dev_p->num_vsi_allocd_to_host = number;
+}
+
+/**
+ * ixgbe_parse_fdir_dev_caps - Parse IXGBE_ACI_CAPS_FD device caps
+ * @hw: pointer to the HW struct
+ * @dev_p: pointer to device capabilities structure
+ * @cap: capability element to parse
+ *
+ * Parse IXGBE_ACI_CAPS_FD for device capabilities.
+ */
+static void ixgbe_parse_fdir_dev_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_dev_caps *dev_p,
+ struct ixgbe_aci_cmd_list_caps_elem *cap)
+{
+ u32 number = IXGBE_LE32_TO_CPU(cap->number);
+
+ UNREFERENCED_1PARAMETER(hw);
+
+ dev_p->num_flow_director_fltr = number;
+}
+
+/**
+ * ixgbe_parse_dev_caps - Parse device capabilities
+ * @hw: pointer to the HW struct
+ * @dev_p: pointer to device capabilities structure
+ * @buf: buffer containing the device capability records
+ * @cap_count: the number of capabilities
+ *
+ * Helper device to parse device (0x000B) capabilities list. For
+ * capabilities shared between device and function, this relies on
+ * ixgbe_parse_common_caps.
+ *
+ * Loop through the list of provided capabilities and extract the relevant
+ * data into the device capabilities structured.
+ */
+static void ixgbe_parse_dev_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_dev_caps *dev_p,
+ void *buf, u32 cap_count)
+{
+ struct ixgbe_aci_cmd_list_caps_elem *cap_resp;
+ u32 i;
+
+ cap_resp = (struct ixgbe_aci_cmd_list_caps_elem *)buf;
+
+ memset(dev_p, 0, sizeof(*dev_p));
+
+ for (i = 0; i < cap_count; i++) {
+ u16 cap = IXGBE_LE16_TO_CPU(cap_resp[i].cap);
+ bool found;
+
+ found = ixgbe_parse_common_caps(hw, &dev_p->common_cap,
+ &cap_resp[i], "dev caps");
+
+ switch (cap) {
+ case IXGBE_ACI_CAPS_VALID_FUNCTIONS:
+ ixgbe_parse_valid_functions_cap(hw, dev_p,
+ &cap_resp[i]);
+ break;
+ case IXGBE_ACI_CAPS_VF:
+ ixgbe_parse_vf_dev_caps(hw, dev_p, &cap_resp[i]);
+ break;
+ case IXGBE_ACI_CAPS_VSI:
+ ixgbe_parse_vsi_dev_caps(hw, dev_p, &cap_resp[i]);
+ break;
+ case IXGBE_ACI_CAPS_FD:
+ ixgbe_parse_fdir_dev_caps(hw, dev_p, &cap_resp[i]);
+ break;
+ default:
+ /* Don't list common capabilities as unknown */
+ if (!found)
+ break;
+ }
+ }
+
+}
+
+/**
+ * ixgbe_parse_vf_func_caps - Parse IXGBE_ACI_CAPS_VF function caps
+ * @hw: pointer to the HW struct
+ * @func_p: pointer to function capabilities structure
+ * @cap: pointer to the capability element to parse
+ *
+ * Extract function capabilities for IXGBE_ACI_CAPS_VF.
+ */
+static void ixgbe_parse_vf_func_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_func_caps *func_p,
+ struct ixgbe_aci_cmd_list_caps_elem *cap)
+{
+ u32 logical_id = IXGBE_LE32_TO_CPU(cap->logical_id);
+ u32 number = IXGBE_LE32_TO_CPU(cap->number);
+
+ UNREFERENCED_1PARAMETER(hw);
+
+ func_p->num_allocd_vfs = number;
+ func_p->vf_base_id = logical_id;
+}
+
+/**
+ * ixgbe_get_num_per_func - determine number of resources per PF
+ * @hw: pointer to the HW structure
+ * @max: value to be evenly split between each PF
+ *
+ * Determine the number of valid functions by going through the bitmap returned
+ * from parsing capabilities and use this to calculate the number of resources
+ * per PF based on the max value passed in.
+ *
+ * Return: the number of resources per PF or 0, if no PH are available.
+ */
+static u32 ixgbe_get_num_per_func(struct ixgbe_hw *hw, u32 max)
+{
+ u8 funcs;
+
+#define IXGBE_CAPS_VALID_FUNCS_M 0xFF
+ funcs = ixgbe_hweight8(hw->dev_caps.common_cap.valid_functions &
+ IXGBE_CAPS_VALID_FUNCS_M);
+
+ if (!funcs)
+ return 0;
+
+ return max / funcs;
+}
+
+/**
+ * ixgbe_parse_vsi_func_caps - Parse IXGBE_ACI_CAPS_VSI function caps
+ * @hw: pointer to the HW struct
+ * @func_p: pointer to function capabilities structure
+ * @cap: pointer to the capability element to parse
+ *
+ * Extract function capabilities for IXGBE_ACI_CAPS_VSI.
+ */
+static void ixgbe_parse_vsi_func_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_func_caps *func_p,
+ struct ixgbe_aci_cmd_list_caps_elem *cap)
+{
+ func_p->guar_num_vsi = ixgbe_get_num_per_func(hw, IXGBE_MAX_VSI);
+}
+
+/**
+ * ixgbe_parse_func_caps - Parse function capabilities
+ * @hw: pointer to the HW struct
+ * @func_p: pointer to function capabilities structure
+ * @buf: buffer containing the function capability records
+ * @cap_count: the number of capabilities
+ *
+ * Helper function to parse function (0x000A) capabilities list. For
+ * capabilities shared between device and function, this relies on
+ * ixgbe_parse_common_caps.
+ *
+ * Loop through the list of provided capabilities and extract the relevant
+ * data into the function capabilities structured.
+ */
+static void ixgbe_parse_func_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_func_caps *func_p,
+ void *buf, u32 cap_count)
+{
+ struct ixgbe_aci_cmd_list_caps_elem *cap_resp;
+ u32 i;
+
+ cap_resp = (struct ixgbe_aci_cmd_list_caps_elem *)buf;
+
+ memset(func_p, 0, sizeof(*func_p));
+
+ for (i = 0; i < cap_count; i++) {
+ u16 cap = IXGBE_LE16_TO_CPU(cap_resp[i].cap);
+ ixgbe_parse_common_caps(hw, &func_p->common_cap,
+ &cap_resp[i], "func caps");
+
+ switch (cap) {
+ case IXGBE_ACI_CAPS_VF:
+ ixgbe_parse_vf_func_caps(hw, func_p, &cap_resp[i]);
+ break;
+ case IXGBE_ACI_CAPS_VSI:
+ ixgbe_parse_vsi_func_caps(hw, func_p, &cap_resp[i]);
+ break;
+ default:
+ /* Don't list common capabilities as unknown */
+ break;
+ }
+ }
+
+}
+
+/**
+ * ixgbe_aci_list_caps - query function/device capabilities
+ * @hw: pointer to the HW struct
+ * @buf: a buffer to hold the capabilities
+ * @buf_size: size of the buffer
+ * @cap_count: if not NULL, set to the number of capabilities reported
+ * @opc: capabilities type to discover, device or function
+ *
+ * Get the function (0x000A) or device (0x000B) capabilities description from
+ * firmware and store it in the buffer.
+ *
+ * If the cap_count pointer is not NULL, then it is set to the number of
+ * capabilities firmware will report. Note that if the buffer size is too
+ * small, it is possible the command will return IXGBE_ERR_OUT_OF_MEM. The
+ * cap_count will still be updated in this case. It is recommended that the
+ * buffer size be set to IXGBE_ACI_MAX_BUFFER_SIZE (the largest possible
+ * buffer that firmware could return) to avoid this.
+ *
+ * Return: the exit code of the operation.
+ * Exit code of IXGBE_ERR_OUT_OF_MEM means the buffer size is too small.
+ */
+s32 ixgbe_aci_list_caps(struct ixgbe_hw *hw, void *buf, u16 buf_size,
+ u32 *cap_count, enum ixgbe_aci_opc opc)
+{
+ struct ixgbe_aci_cmd_list_caps *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.get_cap;
+
+ if (opc != ixgbe_aci_opc_list_func_caps &&
+ opc != ixgbe_aci_opc_list_dev_caps)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, opc);
+ status = ixgbe_aci_send_cmd(hw, &desc, buf, buf_size);
+
+ if (cap_count)
+ *cap_count = IXGBE_LE32_TO_CPU(cmd->count);
+
+ return status;
+}
+
+/**
+ * ixgbe_discover_dev_caps - Read and extract device capabilities
+ * @hw: pointer to the hardware structure
+ * @dev_caps: pointer to device capabilities structure
+ *
+ * Read the device capabilities and extract them into the dev_caps structure
+ * for later use.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_discover_dev_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_dev_caps *dev_caps)
+{
+ u32 status, cap_count = 0;
+ u8 *cbuf = NULL;
+
+ cbuf = (u8*)ixgbe_malloc(hw, IXGBE_ACI_MAX_BUFFER_SIZE);
+ if (!cbuf)
+ return IXGBE_ERR_OUT_OF_MEM;
+ /* Although the driver doesn't know the number of capabilities the
+ * device will return, we can simply send a 4KB buffer, the maximum
+ * possible size that firmware can return.
+ */
+ cap_count = IXGBE_ACI_MAX_BUFFER_SIZE /
+ sizeof(struct ixgbe_aci_cmd_list_caps_elem);
+
+ status = ixgbe_aci_list_caps(hw, cbuf, IXGBE_ACI_MAX_BUFFER_SIZE,
+ &cap_count,
+ ixgbe_aci_opc_list_dev_caps);
+ if (!status)
+ ixgbe_parse_dev_caps(hw, dev_caps, cbuf, cap_count);
+
+ if (cbuf)
+ ixgbe_free(hw, cbuf);
+
+ return status;
+}
+
+/**
+ * ixgbe_discover_func_caps - Read and extract function capabilities
+ * @hw: pointer to the hardware structure
+ * @func_caps: pointer to function capabilities structure
+ *
+ * Read the function capabilities and extract them into the func_caps structure
+ * for later use.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_discover_func_caps(struct ixgbe_hw *hw,
+ struct ixgbe_hw_func_caps *func_caps)
+{
+ u32 cap_count = 0;
+ u8 *cbuf = NULL;
+ s32 status;
+
+ cbuf = (u8*)ixgbe_malloc(hw, IXGBE_ACI_MAX_BUFFER_SIZE);
+ if(!cbuf)
+ return IXGBE_ERR_OUT_OF_MEM;
+ /* Although the driver doesn't know the number of capabilities the
+ * device will return, we can simply send a 4KB buffer, the maximum
+ * possible size that firmware can return.
+ */
+ cap_count = IXGBE_ACI_MAX_BUFFER_SIZE /
+ sizeof(struct ixgbe_aci_cmd_list_caps_elem);
+
+ status = ixgbe_aci_list_caps(hw, cbuf, IXGBE_ACI_MAX_BUFFER_SIZE,
+ &cap_count,
+ ixgbe_aci_opc_list_func_caps);
+ if (!status)
+ ixgbe_parse_func_caps(hw, func_caps, cbuf, cap_count);
+
+ if (cbuf)
+ ixgbe_free(hw, cbuf);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_caps - get info about the HW
+ * @hw: pointer to the hardware structure
+ *
+ * Retrieve both device and function capabilities.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_caps(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ status = ixgbe_discover_dev_caps(hw, &hw->dev_caps);
+ if (status)
+ return status;
+
+ return ixgbe_discover_func_caps(hw, &hw->func_caps);
+}
+
+/**
+ * ixgbe_aci_disable_rxen - disable RX
+ * @hw: pointer to the HW struct
+ *
+ * Request a safe disable of Receive Enable using ACI command (0x000C).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_disable_rxen(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_disable_rxen *cmd;
+ struct ixgbe_aci_desc desc;
+
+ UNREFERENCED_1PARAMETER(hw);
+
+ cmd = &desc.params.disable_rxen;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_disable_rxen);
+
+ cmd->lport_num = (u8)hw->bus.func;
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_get_phy_caps - returns PHY capabilities
+ * @hw: pointer to the HW struct
+ * @qual_mods: report qualified modules
+ * @report_mode: report mode capabilities
+ * @pcaps: structure for PHY capabilities to be filled
+ *
+ * Returns the various PHY capabilities supported on the Port
+ * using ACI command (0x0600).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_phy_caps(struct ixgbe_hw *hw, bool qual_mods, u8 report_mode,
+ struct ixgbe_aci_cmd_get_phy_caps_data *pcaps)
+{
+ struct ixgbe_aci_cmd_get_phy_caps *cmd;
+ u16 pcaps_size = sizeof(*pcaps);
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.get_phy;
+
+ if (!pcaps || (report_mode & ~IXGBE_ACI_REPORT_MODE_M))
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_phy_caps);
+
+ if (qual_mods)
+ cmd->param0 |= IXGBE_CPU_TO_LE16(IXGBE_ACI_GET_PHY_RQM);
+
+ cmd->param0 |= IXGBE_CPU_TO_LE16(report_mode);
+ status = ixgbe_aci_send_cmd(hw, &desc, pcaps, pcaps_size);
+
+ if (status == IXGBE_SUCCESS &&
+ report_mode == IXGBE_ACI_REPORT_TOPO_CAP_MEDIA) {
+ hw->phy.phy_type_low = IXGBE_LE64_TO_CPU(pcaps->phy_type_low);
+ hw->phy.phy_type_high = IXGBE_LE64_TO_CPU(pcaps->phy_type_high);
+ memcpy(hw->link.link_info.module_type, &pcaps->module_type,
+ sizeof(hw->link.link_info.module_type));
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_phy_caps_equals_cfg - check if capabilities match the PHY config
+ * @phy_caps: PHY capabilities
+ * @phy_cfg: PHY configuration
+ *
+ * Helper function to determine if PHY capabilities match PHY
+ * configuration
+ *
+ * Return: true if PHY capabilities match PHY configuration.
+ */
+bool
+ixgbe_phy_caps_equals_cfg(struct ixgbe_aci_cmd_get_phy_caps_data *phy_caps,
+ struct ixgbe_aci_cmd_set_phy_cfg_data *phy_cfg)
+{
+ u8 caps_mask, cfg_mask;
+
+ if (!phy_caps || !phy_cfg)
+ return false;
+
+ /* These bits are not common between capabilities and configuration.
+ * Do not use them to determine equality.
+ */
+ caps_mask = IXGBE_ACI_PHY_CAPS_MASK & ~(IXGBE_ACI_PHY_AN_MODE |
+ IXGBE_ACI_PHY_EN_MOD_QUAL);
+ cfg_mask = IXGBE_ACI_PHY_ENA_VALID_MASK &
+ ~IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT;
+
+ if (phy_caps->phy_type_low != phy_cfg->phy_type_low ||
+ phy_caps->phy_type_high != phy_cfg->phy_type_high ||
+ ((phy_caps->caps & caps_mask) != (phy_cfg->caps & cfg_mask)) ||
+ phy_caps->low_power_ctrl_an != phy_cfg->low_power_ctrl_an ||
+ phy_caps->eee_cap != phy_cfg->eee_cap ||
+ phy_caps->eeer_value != phy_cfg->eeer_value ||
+ phy_caps->link_fec_options != phy_cfg->link_fec_opt)
+ return false;
+
+ return true;
+}
+
+/**
+ * ixgbe_copy_phy_caps_to_cfg - Copy PHY ability data to configuration data
+ * @caps: PHY ability structure to copy data from
+ * @cfg: PHY configuration structure to copy data to
+ *
+ * Helper function to copy data from PHY capabilities data structure
+ * to PHY configuration data structure
+ */
+void ixgbe_copy_phy_caps_to_cfg(struct ixgbe_aci_cmd_get_phy_caps_data *caps,
+ struct ixgbe_aci_cmd_set_phy_cfg_data *cfg)
+{
+ if (!caps || !cfg)
+ return;
+
+ memset(cfg, 0, sizeof(*cfg));
+ cfg->phy_type_low = caps->phy_type_low;
+ cfg->phy_type_high = caps->phy_type_high;
+ cfg->caps = caps->caps;
+ cfg->low_power_ctrl_an = caps->low_power_ctrl_an;
+ cfg->eee_cap = caps->eee_cap;
+ cfg->eeer_value = caps->eeer_value;
+ cfg->link_fec_opt = caps->link_fec_options;
+ cfg->module_compliance_enforcement =
+ caps->module_compliance_enforcement;
+}
+
+/**
+ * ixgbe_aci_set_phy_cfg - set PHY configuration
+ * @hw: pointer to the HW struct
+ * @cfg: structure with PHY configuration data to be set
+ *
+ * Set the various PHY configuration parameters supported on the Port
+ * using ACI command (0x0601).
+ * One or more of the Set PHY config parameters may be ignored in an MFP
+ * mode as the PF may not have the privilege to set some of the PHY Config
+ * parameters.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_set_phy_cfg(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_set_phy_cfg_data *cfg)
+{
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ if (!cfg)
+ return IXGBE_ERR_PARAM;
+
+ /* Ensure that only valid bits of cfg->caps can be turned on. */
+ if (cfg->caps & ~IXGBE_ACI_PHY_ENA_VALID_MASK) {
+ cfg->caps &= IXGBE_ACI_PHY_ENA_VALID_MASK;
+ }
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_set_phy_cfg);
+ desc.flags |= IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_RD);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, cfg, sizeof(*cfg));
+
+ if (!status)
+ hw->phy.curr_user_phy_cfg = *cfg;
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_set_link_restart_an - set up link and restart AN
+ * @hw: pointer to the HW struct
+ * @ena_link: if true: enable link, if false: disable link
+ *
+ * Function sets up the link and restarts the Auto-Negotiation over the link.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_set_link_restart_an(struct ixgbe_hw *hw, bool ena_link)
+{
+ struct ixgbe_aci_cmd_restart_an *cmd;
+ struct ixgbe_aci_desc desc;
+
+ cmd = &desc.params.restart_an;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_restart_an);
+
+ cmd->cmd_flags = IXGBE_ACI_RESTART_AN_LINK_RESTART;
+ if (ena_link)
+ cmd->cmd_flags |= IXGBE_ACI_RESTART_AN_LINK_ENABLE;
+ else
+ cmd->cmd_flags &= ~IXGBE_ACI_RESTART_AN_LINK_ENABLE;
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_is_media_cage_present - check if media cage is present
+ * @hw: pointer to the HW struct
+ *
+ * Identify presence of media cage using the ACI command (0x06E0).
+ *
+ * Return: true if media cage is present, else false. If no cage, then
+ * media type is backplane or BASE-T.
+ */
+static bool ixgbe_is_media_cage_present(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_link_topo *cmd;
+ struct ixgbe_aci_desc desc;
+
+ cmd = &desc.params.get_link_topo;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_link_topo);
+
+ cmd->addr.topo_params.node_type_ctx =
+ (IXGBE_ACI_LINK_TOPO_NODE_CTX_PORT <<
+ IXGBE_ACI_LINK_TOPO_NODE_CTX_S);
+
+ /* set node type */
+ cmd->addr.topo_params.node_type_ctx |=
+ (IXGBE_ACI_LINK_TOPO_NODE_TYPE_M &
+ IXGBE_ACI_LINK_TOPO_NODE_TYPE_CAGE);
+
+ /* Node type cage can be used to determine if cage is present. If AQC
+ * returns error (ENOENT), then no cage present. If no cage present then
+ * connection type is backplane or BASE-T.
+ */
+ return ixgbe_aci_get_netlist_node(hw, cmd, NULL, NULL);
+}
+
+/**
+ * ixgbe_get_media_type_from_phy_type - Gets media type based on phy type
+ * @hw: pointer to the HW struct
+ *
+ * Try to identify the media type based on the phy type.
+ * If more than one media type, the ixgbe_media_type_unknown is returned.
+ * First, phy_type_low is checked, then phy_type_high.
+ * If none are identified, the ixgbe_media_type_unknown is returned
+ *
+ * Return: type of a media based on phy type in form of enum.
+ */
+static enum ixgbe_media_type
+ixgbe_get_media_type_from_phy_type(struct ixgbe_hw *hw)
+{
+ struct ixgbe_link_status *hw_link_info;
+
+ if (!hw)
+ return ixgbe_media_type_unknown;
+
+ hw_link_info = &hw->link.link_info;
+ if (hw_link_info->phy_type_low && hw_link_info->phy_type_high)
+ /* If more than one media type is selected, report unknown */
+ return ixgbe_media_type_unknown;
+
+ if (hw_link_info->phy_type_low) {
+ /* 1G SGMII is a special case where some DA cable PHYs
+ * may show this as an option when it really shouldn't
+ * be since SGMII is meant to be between a MAC and a PHY
+ * in a backplane. Try to detect this case and handle it
+ */
+ if (hw_link_info->phy_type_low == IXGBE_PHY_TYPE_LOW_1G_SGMII &&
+ (hw_link_info->module_type[IXGBE_ACI_MOD_TYPE_IDENT] ==
+ IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_ACTIVE ||
+ hw_link_info->module_type[IXGBE_ACI_MOD_TYPE_IDENT] ==
+ IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_PASSIVE))
+ return ixgbe_media_type_da;
+
+ switch (hw_link_info->phy_type_low) {
+ case IXGBE_PHY_TYPE_LOW_1000BASE_SX:
+ case IXGBE_PHY_TYPE_LOW_1000BASE_LX:
+ case IXGBE_PHY_TYPE_LOW_10GBASE_SR:
+ case IXGBE_PHY_TYPE_LOW_10GBASE_LR:
+ return ixgbe_media_type_fiber;
+ case IXGBE_PHY_TYPE_LOW_10G_SFI_AOC_ACC:
+ return ixgbe_media_type_fiber;
+ case IXGBE_PHY_TYPE_LOW_100BASE_TX:
+ case IXGBE_PHY_TYPE_LOW_1000BASE_T:
+ case IXGBE_PHY_TYPE_LOW_2500BASE_T:
+ case IXGBE_PHY_TYPE_LOW_5GBASE_T:
+ case IXGBE_PHY_TYPE_LOW_10GBASE_T:
+ return ixgbe_media_type_copper;
+ case IXGBE_PHY_TYPE_LOW_10G_SFI_DA:
+ return ixgbe_media_type_da;
+ case IXGBE_PHY_TYPE_LOW_1000BASE_KX:
+ case IXGBE_PHY_TYPE_LOW_2500BASE_KX:
+ case IXGBE_PHY_TYPE_LOW_2500BASE_X:
+ case IXGBE_PHY_TYPE_LOW_5GBASE_KR:
+ case IXGBE_PHY_TYPE_LOW_10GBASE_KR_CR1:
+ case IXGBE_PHY_TYPE_LOW_10G_SFI_C2C:
+ return ixgbe_media_type_backplane;
+ }
+ } else {
+ switch (hw_link_info->phy_type_high) {
+ case IXGBE_PHY_TYPE_HIGH_10BASE_T:
+ return ixgbe_media_type_copper;
+ }
+ }
+ return ixgbe_media_type_unknown;
+}
+
+/**
+ * ixgbe_update_link_info - update status of the HW network link
+ * @hw: pointer to the HW struct
+ *
+ * Update the status of the HW network link.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_update_link_info(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data *pcaps;
+ struct ixgbe_link_status *li;
+ s32 status;
+
+ if (!hw)
+ return IXGBE_ERR_PARAM;
+
+ li = &hw->link.link_info;
+
+ status = ixgbe_aci_get_link_info(hw, true, NULL);
+ if (status)
+ return status;
+
+ if (li->link_info & IXGBE_ACI_MEDIA_AVAILABLE) {
+ pcaps = (struct ixgbe_aci_cmd_get_phy_caps_data *)
+ ixgbe_malloc(hw, sizeof(*pcaps));
+ if (!pcaps)
+ return IXGBE_ERR_OUT_OF_MEM;
+
+ status = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_TOPO_CAP_MEDIA,
+ pcaps);
+
+ if (status == IXGBE_SUCCESS)
+ memcpy(li->module_type, &pcaps->module_type,
+ sizeof(li->module_type));
+
+ ixgbe_free(hw, pcaps);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_link_status - get status of the HW network link
+ * @hw: pointer to the HW struct
+ * @link_up: pointer to bool (true/false = linkup/linkdown)
+ *
+ * Variable link_up is true if link is up, false if link is down.
+ * The variable link_up is invalid if status is non zero. As a
+ * result of this call, link status reporting becomes enabled
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_link_status(struct ixgbe_hw *hw, bool *link_up)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ if (!hw || !link_up)
+ return IXGBE_ERR_PARAM;
+
+ if (hw->link.get_link_info) {
+ status = ixgbe_update_link_info(hw);
+ if (status) {
+ return status;
+ }
+ }
+
+ *link_up = hw->link.link_info.link_info & IXGBE_ACI_LINK_UP;
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_get_link_info - get the link status
+ * @hw: pointer to the HW struct
+ * @ena_lse: enable/disable LinkStatusEvent reporting
+ * @link: pointer to link status structure - optional
+ *
+ * Get the current Link Status using ACI command (0x607).
+ * The current link can be optionally provided to update
+ * the status.
+ *
+ * Return: the link status of the adapter.
+ */
+s32 ixgbe_aci_get_link_info(struct ixgbe_hw *hw, bool ena_lse,
+ struct ixgbe_link_status *link)
+{
+ struct ixgbe_aci_cmd_get_link_status_data link_data = { 0 };
+ struct ixgbe_aci_cmd_get_link_status *resp;
+ struct ixgbe_link_status *li_old, *li;
+ struct ixgbe_fc_info *hw_fc_info;
+ struct ixgbe_aci_desc desc;
+ bool tx_pause, rx_pause;
+ u8 cmd_flags;
+ s32 status;
+
+ if (!hw)
+ return IXGBE_ERR_PARAM;
+
+ li_old = &hw->link.link_info_old;
+ li = &hw->link.link_info;
+ hw_fc_info = &hw->fc;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_link_status);
+ cmd_flags = (ena_lse) ? IXGBE_ACI_LSE_ENA : IXGBE_ACI_LSE_DIS;
+ resp = &desc.params.get_link_status;
+ resp->cmd_flags = cmd_flags;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, &link_data, sizeof(link_data));
+
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ /* save off old link status information */
+ *li_old = *li;
+
+ /* update current link status information */
+ li->link_speed = IXGBE_LE16_TO_CPU(link_data.link_speed);
+ li->phy_type_low = IXGBE_LE64_TO_CPU(link_data.phy_type_low);
+ li->phy_type_high = IXGBE_LE64_TO_CPU(link_data.phy_type_high);
+ li->link_info = link_data.link_info;
+ li->link_cfg_err = link_data.link_cfg_err;
+ li->an_info = link_data.an_info;
+ li->ext_info = link_data.ext_info;
+ li->max_frame_size = IXGBE_LE16_TO_CPU(link_data.max_frame_size);
+ li->fec_info = link_data.cfg & IXGBE_ACI_FEC_MASK;
+ li->topo_media_conflict = link_data.topo_media_conflict;
+ li->pacing = link_data.cfg & (IXGBE_ACI_CFG_PACING_M |
+ IXGBE_ACI_CFG_PACING_TYPE_M);
+
+ /* update fc info */
+ tx_pause = !!(link_data.an_info & IXGBE_ACI_LINK_PAUSE_TX);
+ rx_pause = !!(link_data.an_info & IXGBE_ACI_LINK_PAUSE_RX);
+ if (tx_pause && rx_pause)
+ hw_fc_info->current_mode = ixgbe_fc_full;
+ else if (tx_pause)
+ hw_fc_info->current_mode = ixgbe_fc_tx_pause;
+ else if (rx_pause)
+ hw_fc_info->current_mode = ixgbe_fc_rx_pause;
+ else
+ hw_fc_info->current_mode = ixgbe_fc_none;
+
+ li->lse_ena = !!(resp->cmd_flags & IXGBE_ACI_LSE_IS_ENABLED);
+
+ /* save link status information */
+ if (link)
+ *link = *li;
+
+ /* flag cleared so calling functions don't call AQ again */
+ hw->link.get_link_info = false;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_aci_set_event_mask - set event mask
+ * @hw: pointer to the HW struct
+ * @port_num: port number of the physical function
+ * @mask: event mask to be set
+ *
+ * Set the event mask using ACI command (0x0613).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_set_event_mask(struct ixgbe_hw *hw, u8 port_num, u16 mask)
+{
+ struct ixgbe_aci_cmd_set_event_mask *cmd;
+ struct ixgbe_aci_desc desc;
+
+ cmd = &desc.params.set_event_mask;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_set_event_mask);
+
+ cmd->event_mask = IXGBE_CPU_TO_LE16(mask);
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_configure_lse - enable/disable link status events
+ * @hw: pointer to the HW struct
+ * @activate: bool value deciding if lse should be enabled nor disabled
+ * @mask: event mask to be set; a set bit means deactivation of the
+ * corresponding event
+ *
+ * Set the event mask and then enable or disable link status events
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_configure_lse(struct ixgbe_hw *hw, bool activate, u16 mask)
+{
+ s32 rc;
+
+ rc = ixgbe_aci_set_event_mask(hw, (u8)hw->bus.func, mask);
+ if (rc) {
+ return rc;
+ }
+
+ /* Enabling link status events generation by fw */
+ rc = ixgbe_aci_get_link_info(hw, activate, NULL);
+ if (rc) {
+ return rc;
+ }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_aci_get_netlist_node - get a node handle
+ * @hw: pointer to the hw struct
+ * @cmd: get_link_topo AQ structure
+ * @node_part_number: output node part number if node found
+ * @node_handle: output node handle parameter if node found
+ *
+ * Get the netlist node and assigns it to
+ * the provided handle using ACI command (0x06E0).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_netlist_node(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_get_link_topo *cmd,
+ u8 *node_part_number, u16 *node_handle)
+{
+ struct ixgbe_aci_desc desc;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_link_topo);
+ desc.params.get_link_topo = *cmd;
+
+ if (ixgbe_aci_send_cmd(hw, &desc, NULL, 0))
+ return IXGBE_ERR_NOT_SUPPORTED;
+
+ if (node_handle)
+ *node_handle =
+ IXGBE_LE16_TO_CPU(desc.params.get_link_topo.addr.handle);
+ if (node_part_number)
+ *node_part_number = desc.params.get_link_topo.node_part_num;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_find_netlist_node - find a node handle
+ * @hw: pointer to the hw struct
+ * @node_type_ctx: type of netlist node to look for
+ * @node_part_number: node part number to look for
+ * @node_handle: output parameter if node found - optional
+ *
+ * Find and return the node handle for a given node type and part number in the
+ * netlist. When found IXGBE_SUCCESS is returned, IXGBE_ERR_NOT_SUPPORTED
+ * otherwise. If @node_handle provided, it would be set to found node handle.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_find_netlist_node(struct ixgbe_hw *hw, u8 node_type_ctx,
+ u8 node_part_number, u16 *node_handle)
+{
+ struct ixgbe_aci_cmd_get_link_topo cmd;
+ u8 rec_node_part_number;
+ u16 rec_node_handle;
+ s32 status;
+ u8 idx;
+
+ for (idx = 0; idx < IXGBE_MAX_NETLIST_SIZE; idx++) {
+ memset(&cmd, 0, sizeof(cmd));
+
+ cmd.addr.topo_params.node_type_ctx =
+ (node_type_ctx << IXGBE_ACI_LINK_TOPO_NODE_TYPE_S);
+ cmd.addr.topo_params.index = idx;
+
+ status = ixgbe_aci_get_netlist_node(hw, &cmd,
+ &rec_node_part_number,
+ &rec_node_handle);
+ if (status)
+ return status;
+
+ if (rec_node_part_number == node_part_number) {
+ if (node_handle)
+ *node_handle = rec_node_handle;
+ return IXGBE_SUCCESS;
+ }
+ }
+
+ return IXGBE_ERR_NOT_SUPPORTED;
+}
+
+/**
+ * ixgbe_aci_read_i2c - read I2C register value
+ * @hw: pointer to the hw struct
+ * @topo_addr: topology address for a device to communicate with
+ * @bus_addr: 7-bit I2C bus address
+ * @addr: I2C memory address (I2C offset) with up to 16 bits
+ * @params: I2C parameters: bit [7] - Repeated start,
+ * bits [6:5] data offset size,
+ * bit [4] - I2C address type, bits [3:0] - data size
+ * to read (0-16 bytes)
+ * @data: pointer to data (0 to 16 bytes) to be read from the I2C device
+ *
+ * Read the value of the I2C pin register using ACI command (0x06E2).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_read_i2c(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_link_topo_addr topo_addr,
+ u16 bus_addr, __le16 addr, u8 params, u8 *data)
+{
+ struct ixgbe_aci_desc desc = { 0 };
+ struct ixgbe_aci_cmd_i2c *cmd;
+ u8 data_size;
+ s32 status;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_read_i2c);
+ cmd = &desc.params.read_write_i2c;
+
+ if (!data)
+ return IXGBE_ERR_PARAM;
+
+ data_size = (params & IXGBE_ACI_I2C_DATA_SIZE_M) >>
+ IXGBE_ACI_I2C_DATA_SIZE_S;
+
+ cmd->i2c_bus_addr = IXGBE_CPU_TO_LE16(bus_addr);
+ cmd->topo_addr = topo_addr;
+ cmd->i2c_params = params;
+ cmd->i2c_addr = addr;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+ if (!status) {
+ struct ixgbe_aci_cmd_read_i2c_resp *resp;
+ u8 i;
+
+ resp = &desc.params.read_i2c_resp;
+ for (i = 0; i < data_size; i++) {
+ *data = resp->i2c_data[i];
+ data++;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_write_i2c - write a value to I2C register
+ * @hw: pointer to the hw struct
+ * @topo_addr: topology address for a device to communicate with
+ * @bus_addr: 7-bit I2C bus address
+ * @addr: I2C memory address (I2C offset) with up to 16 bits
+ * @params: I2C parameters: bit [4] - I2C address type, bits [3:0] - data size
+ * to write (0-7 bytes)
+ * @data: pointer to data (0 to 4 bytes) to be written to the I2C device
+ *
+ * Write a value to the I2C pin register using ACI command (0x06E3).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_write_i2c(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_link_topo_addr topo_addr,
+ u16 bus_addr, __le16 addr, u8 params, u8 *data)
+{
+ struct ixgbe_aci_desc desc = { 0 };
+ struct ixgbe_aci_cmd_i2c *cmd;
+ u8 i, data_size;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_write_i2c);
+ cmd = &desc.params.read_write_i2c;
+
+ data_size = (params & IXGBE_ACI_I2C_DATA_SIZE_M) >>
+ IXGBE_ACI_I2C_DATA_SIZE_S;
+
+ /* data_size limited to 4 */
+ if (data_size > 4)
+ return IXGBE_ERR_PARAM;
+
+ cmd->i2c_bus_addr = IXGBE_CPU_TO_LE16(bus_addr);
+ cmd->topo_addr = topo_addr;
+ cmd->i2c_params = params;
+ cmd->i2c_addr = addr;
+
+ for (i = 0; i < data_size; i++) {
+ cmd->i2c_data[i] = *data;
+ data++;
+ }
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_set_port_id_led - set LED value for the given port
+ * @hw: pointer to the HW struct
+ * @orig_mode: set LED original mode
+ *
+ * Set LED value for the given port (0x06E9)
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_set_port_id_led(struct ixgbe_hw *hw, bool orig_mode)
+{
+ struct ixgbe_aci_cmd_set_port_id_led *cmd;
+ struct ixgbe_aci_desc desc;
+
+ cmd = &desc.params.set_port_id_led;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_set_port_id_led);
+
+ cmd->lport_num = (u8)hw->bus.func;
+ cmd->lport_num_valid = IXGBE_ACI_PORT_ID_PORT_NUM_VALID;
+
+ if (orig_mode)
+ cmd->ident_mode = IXGBE_ACI_PORT_IDENT_LED_ORIG;
+ else
+ cmd->ident_mode = IXGBE_ACI_PORT_IDENT_LED_BLINK;
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_set_gpio - set GPIO pin state
+ * @hw: pointer to the hw struct
+ * @gpio_ctrl_handle: GPIO controller node handle
+ * @pin_idx: IO Number of the GPIO that needs to be set
+ * @value: SW provide IO value to set in the LSB
+ *
+ * Set the GPIO pin state that is a part of the topology
+ * using ACI command (0x06EC).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_set_gpio(struct ixgbe_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+ bool value)
+{
+ struct ixgbe_aci_cmd_gpio *cmd;
+ struct ixgbe_aci_desc desc;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_set_gpio);
+ cmd = &desc.params.read_write_gpio;
+ cmd->gpio_ctrl_handle = IXGBE_CPU_TO_LE16(gpio_ctrl_handle);
+ cmd->gpio_num = pin_idx;
+ cmd->gpio_val = value ? 1 : 0;
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_get_gpio - get GPIO pin state
+ * @hw: pointer to the hw struct
+ * @gpio_ctrl_handle: GPIO controller node handle
+ * @pin_idx: IO Number of the GPIO that needs to be set
+ * @value: IO value read
+ *
+ * Get the value of a GPIO signal which is part of the topology
+ * using ACI command (0x06ED).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_gpio(struct ixgbe_hw *hw, u16 gpio_ctrl_handle, u8 pin_idx,
+ bool *value)
+{
+ struct ixgbe_aci_cmd_gpio *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_gpio);
+ cmd = &desc.params.read_write_gpio;
+ cmd->gpio_ctrl_handle = IXGBE_CPU_TO_LE16(gpio_ctrl_handle);
+ cmd->gpio_num = pin_idx;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+ if (status)
+ return status;
+
+ *value = !!cmd->gpio_val;
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_aci_sff_eeprom - read/write SFF EEPROM
+ * @hw: pointer to the HW struct
+ * @lport: bits [7:0] = logical port, bit [8] = logical port valid
+ * @bus_addr: I2C bus address of the eeprom (typically 0xA0, 0=topo default)
+ * @mem_addr: I2C offset. lower 8 bits for address, 8 upper bits zero padding.
+ * @page: QSFP page
+ * @page_bank_ctrl: configuration of SFF/CMIS paging and banking control
+ * @data: pointer to data buffer to be read/written to the I2C device.
+ * @length: 1-16 for read, 1 for write.
+ * @write: 0 read, 1 for write.
+ *
+ * Read/write SFF EEPROM using ACI command (0x06EE).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_sff_eeprom(struct ixgbe_hw *hw, u16 lport, u8 bus_addr,
+ u16 mem_addr, u8 page, u8 page_bank_ctrl, u8 *data,
+ u8 length, bool write)
+{
+ struct ixgbe_aci_cmd_sff_eeprom *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ if (!data || (mem_addr & 0xff00))
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_sff_eeprom);
+ cmd = &desc.params.read_write_sff_param;
+ desc.flags = IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_RD);
+ cmd->lport_num = (u8)(lport & 0xff);
+ cmd->lport_num_valid = (u8)((lport >> 8) & 0x01);
+ cmd->i2c_bus_addr = IXGBE_CPU_TO_LE16(((bus_addr >> 1) &
+ IXGBE_ACI_SFF_I2CBUS_7BIT_M) |
+ ((page_bank_ctrl <<
+ IXGBE_ACI_SFF_PAGE_BANK_CTRL_S) &
+ IXGBE_ACI_SFF_PAGE_BANK_CTRL_M));
+ cmd->i2c_offset = IXGBE_CPU_TO_LE16(mem_addr & 0xff);
+ cmd->module_page = page;
+ if (write)
+ cmd->i2c_bus_addr |= IXGBE_CPU_TO_LE16(IXGBE_ACI_SFF_IS_WRITE);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, data, length);
+ return status;
+}
+
+/**
+ * ixgbe_aci_prog_topo_dev_nvm - program Topology Device NVM
+ * @hw: pointer to the hardware structure
+ * @topo_params: pointer to structure storing topology parameters for a device
+ *
+ * Program Topology Device NVM using ACI command (0x06F2).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_prog_topo_dev_nvm(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_link_topo_params *topo_params)
+{
+ struct ixgbe_aci_cmd_prog_topo_dev_nvm *cmd;
+ struct ixgbe_aci_desc desc;
+
+ cmd = &desc.params.prog_topo_dev_nvm;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_prog_topo_dev_nvm);
+
+ memcpy(&cmd->topo_params, topo_params, sizeof(*topo_params));
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_read_topo_dev_nvm - read Topology Device NVM
+ * @hw: pointer to the hardware structure
+ * @topo_params: pointer to structure storing topology parameters for a device
+ * @start_address: byte offset in the topology device NVM
+ * @data: pointer to data buffer
+ * @data_size: number of bytes to be read from the topology device NVM
+ * Read Topology Device NVM (0x06F3)
+ *
+ * Read Topology of Device NVM using ACI command (0x06F3).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_read_topo_dev_nvm(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_link_topo_params *topo_params,
+ u32 start_address, u8 *data, u8 data_size)
+{
+ struct ixgbe_aci_cmd_read_topo_dev_nvm *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ if (!data || data_size == 0 ||
+ data_size > IXGBE_ACI_READ_TOPO_DEV_NVM_DATA_READ_SIZE)
+ return IXGBE_ERR_PARAM;
+
+ cmd = &desc.params.read_topo_dev_nvm;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_read_topo_dev_nvm);
+
+ desc.datalen = IXGBE_CPU_TO_LE16(data_size);
+ memcpy(&cmd->topo_params, topo_params, sizeof(*topo_params));
+ cmd->start_address = IXGBE_CPU_TO_LE32(start_address);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+ if (status)
+ return status;
+
+ memcpy(data, cmd->data_read, data_size);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_acquire_nvm - Generic request for acquiring the NVM ownership
+ * @hw: pointer to the HW structure
+ * @access: NVM access type (read or write)
+ *
+ * Request NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_acquire_nvm(struct ixgbe_hw *hw,
+ enum ixgbe_aci_res_access_type access)
+{
+ u32 fla;
+
+ /* Skip if we are in blank NVM programming mode */
+ fla = IXGBE_READ_REG(hw, GLNVM_FLA);
+ if ((fla & GLNVM_FLA_LOCKED_M) == 0)
+ return IXGBE_SUCCESS;
+
+ return ixgbe_acquire_res(hw, IXGBE_NVM_RES_ID, access,
+ IXGBE_NVM_TIMEOUT);
+}
+
+/**
+ * ixgbe_release_nvm - Generic request for releasing the NVM ownership
+ * @hw: pointer to the HW structure
+ *
+ * Release NVM ownership.
+ */
+void ixgbe_release_nvm(struct ixgbe_hw *hw)
+{
+ u32 fla;
+
+ /* Skip if we are in blank NVM programming mode */
+ fla = IXGBE_READ_REG(hw, GLNVM_FLA);
+ if ((fla & GLNVM_FLA_LOCKED_M) == 0)
+ return;
+
+ ixgbe_release_res(hw, IXGBE_NVM_RES_ID);
+}
+
+
+/**
+ * ixgbe_aci_read_nvm - read NVM
+ * @hw: pointer to the HW struct
+ * @module_typeid: module pointer location in words from the NVM beginning
+ * @offset: byte offset from the module beginning
+ * @length: length of the section to be read (in bytes from the offset)
+ * @data: command buffer (size [bytes] = length)
+ * @last_command: tells if this is the last command in a series
+ * @read_shadow_ram: tell if this is a shadow RAM read
+ *
+ * Read the NVM using ACI command (0x0701).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_read_nvm(struct ixgbe_hw *hw, u16 module_typeid, u32 offset,
+ u16 length, void *data, bool last_command,
+ bool read_shadow_ram)
+{
+ struct ixgbe_aci_desc desc;
+ struct ixgbe_aci_cmd_nvm *cmd;
+
+ cmd = &desc.params.nvm;
+
+ if (offset > IXGBE_ACI_NVM_MAX_OFFSET)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_read);
+
+ if (!read_shadow_ram && module_typeid == IXGBE_ACI_NVM_START_POINT)
+ cmd->cmd_flags |= IXGBE_ACI_NVM_FLASH_ONLY;
+
+ /* If this is the last command in a series, set the proper flag. */
+ if (last_command)
+ cmd->cmd_flags |= IXGBE_ACI_NVM_LAST_CMD;
+ cmd->module_typeid = IXGBE_CPU_TO_LE16(module_typeid);
+ cmd->offset_low = IXGBE_CPU_TO_LE16(offset & 0xFFFF);
+ cmd->offset_high = (offset >> 16) & 0xFF;
+ cmd->length = IXGBE_CPU_TO_LE16(length);
+
+ return ixgbe_aci_send_cmd(hw, &desc, data, length);
+}
+
+/**
+ * ixgbe_aci_erase_nvm - erase NVM sector
+ * @hw: pointer to the HW struct
+ * @module_typeid: module pointer location in words from the NVM beginning
+ *
+ * Erase the NVM sector using the ACI command (0x0702).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_erase_nvm(struct ixgbe_hw *hw, u16 module_typeid)
+{
+ struct ixgbe_aci_desc desc;
+ struct ixgbe_aci_cmd_nvm *cmd;
+ s32 status;
+ __le16 len;
+
+ /* read a length value from SR, so module_typeid is equal to 0 */
+ /* calculate offset where module size is placed from bytes to words */
+ /* set last command and read from SR values to true */
+ status = ixgbe_aci_read_nvm(hw, 0, 2 * module_typeid + 2, 2, &len, true,
+ true);
+ if (status)
+ return status;
+
+ cmd = &desc.params.nvm;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_erase);
+
+ cmd->module_typeid = IXGBE_CPU_TO_LE16(module_typeid);
+ cmd->length = len;
+ cmd->offset_low = 0;
+ cmd->offset_high = 0;
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_aci_update_nvm - update NVM
+ * @hw: pointer to the HW struct
+ * @module_typeid: module pointer location in words from the NVM beginning
+ * @offset: byte offset from the module beginning
+ * @length: length of the section to be written (in bytes from the offset)
+ * @data: command buffer (size [bytes] = length)
+ * @last_command: tells if this is the last command in a series
+ * @command_flags: command parameters
+ *
+ * Update the NVM using the ACI command (0x0703).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_update_nvm(struct ixgbe_hw *hw, u16 module_typeid,
+ u32 offset, u16 length, void *data,
+ bool last_command, u8 command_flags)
+{
+ struct ixgbe_aci_desc desc;
+ struct ixgbe_aci_cmd_nvm *cmd;
+
+ cmd = &desc.params.nvm;
+
+ /* In offset the highest byte must be zeroed. */
+ if (offset & 0xFF000000)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_write);
+
+ cmd->cmd_flags |= command_flags;
+
+ /* If this is the last command in a series, set the proper flag. */
+ if (last_command)
+ cmd->cmd_flags |= IXGBE_ACI_NVM_LAST_CMD;
+ cmd->module_typeid = IXGBE_CPU_TO_LE16(module_typeid);
+ cmd->offset_low = IXGBE_CPU_TO_LE16(offset & 0xFFFF);
+ cmd->offset_high = (offset >> 16) & 0xFF;
+ cmd->length = IXGBE_CPU_TO_LE16(length);
+
+ desc.flags |= IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_RD);
+
+ return ixgbe_aci_send_cmd(hw, &desc, data, length);
+}
+
+/**
+ * ixgbe_aci_read_nvm_cfg - read an NVM config block
+ * @hw: pointer to the HW struct
+ * @cmd_flags: NVM access admin command bits
+ * @field_id: field or feature ID
+ * @data: buffer for result
+ * @buf_size: buffer size
+ * @elem_count: pointer to count of elements read by FW
+ *
+ * Reads a single or multiple feature/field ID and data using ACI command
+ * (0x0704).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_read_nvm_cfg(struct ixgbe_hw *hw, u8 cmd_flags,
+ u16 field_id, void *data, u16 buf_size,
+ u16 *elem_count)
+{
+ struct ixgbe_aci_cmd_nvm_cfg *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.nvm_cfg;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_cfg_read);
+
+ cmd->cmd_flags = cmd_flags;
+ cmd->id = IXGBE_CPU_TO_LE16(field_id);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, data, buf_size);
+ if (!status && elem_count)
+ *elem_count = IXGBE_LE16_TO_CPU(cmd->count);
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_write_nvm_cfg - write an NVM config block
+ * @hw: pointer to the HW struct
+ * @cmd_flags: NVM access admin command bits
+ * @data: buffer for result
+ * @buf_size: buffer size
+ * @elem_count: count of elements to be written
+ *
+ * Writes a single or multiple feature/field ID and data using ACI command
+ * (0x0705).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_write_nvm_cfg(struct ixgbe_hw *hw, u8 cmd_flags,
+ void *data, u16 buf_size, u16 elem_count)
+{
+ struct ixgbe_aci_cmd_nvm_cfg *cmd;
+ struct ixgbe_aci_desc desc;
+
+ cmd = &desc.params.nvm_cfg;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_cfg_write);
+ desc.flags |= IXGBE_CPU_TO_LE16(IXGBE_ACI_FLAG_RD);
+
+ cmd->count = IXGBE_CPU_TO_LE16(elem_count);
+ cmd->cmd_flags = cmd_flags;
+
+ return ixgbe_aci_send_cmd(hw, &desc, data, buf_size);
+}
+
+/**
+ * ixgbe_nvm_validate_checksum - validate checksum
+ * @hw: pointer to the HW struct
+ *
+ * Verify NVM PFA checksum validity using ACI command (0x0706).
+ * If the checksum verification failed, IXGBE_ERR_NVM_CHECKSUM is returned.
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_nvm_validate_checksum(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_nvm_checksum *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+ if (status)
+ return status;
+
+ cmd = &desc.params.nvm_checksum;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_checksum);
+ cmd->flags = IXGBE_ACI_NVM_CHECKSUM_VERIFY;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ ixgbe_release_nvm(hw);
+
+ if (!status)
+ if (IXGBE_LE16_TO_CPU(cmd->checksum) !=
+ IXGBE_ACI_NVM_CHECKSUM_CORRECT) {
+ ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE,
+ "Invalid Shadow Ram checksum");
+ status = IXGBE_ERR_NVM_CHECKSUM;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_nvm_recalculate_checksum - recalculate checksum
+ * @hw: pointer to the HW struct
+ *
+ * Recalculate NVM PFA checksum using ACI command (0x0706).
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_nvm_recalculate_checksum(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_nvm_checksum *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_WRITE);
+ if (status)
+ return status;
+
+ cmd = &desc.params.nvm_checksum;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_checksum);
+ cmd->flags = IXGBE_ACI_NVM_CHECKSUM_RECALC;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_nvm_write_activate - NVM activate write
+ * @hw: pointer to the HW struct
+ * @cmd_flags: flags for write activate command
+ * @response_flags: response indicators from firmware
+ *
+ * Update the control word with the required banks' validity bits
+ * and dumps the Shadow RAM to flash using ACI command (0x0707).
+ *
+ * cmd_flags controls which banks to activate, the preservation level to use
+ * when activating the NVM bank, and whether an EMP reset is required for
+ * activation.
+ *
+ * Note that the 16bit cmd_flags value is split between two separate 1 byte
+ * flag values in the descriptor.
+ *
+ * On successful return of the firmware command, the response_flags variable
+ * is updated with the flags reported by firmware indicating certain status,
+ * such as whether EMP reset is enabled.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_nvm_write_activate(struct ixgbe_hw *hw, u16 cmd_flags,
+ u8 *response_flags)
+{
+ struct ixgbe_aci_desc desc;
+ struct ixgbe_aci_cmd_nvm *cmd;
+ s32 status;
+
+ cmd = &desc.params.nvm;
+ ixgbe_fill_dflt_direct_cmd_desc(&desc,
+ ixgbe_aci_opc_nvm_write_activate);
+
+ cmd->cmd_flags = LO_BYTE(cmd_flags);
+ cmd->offset_high = HI_BYTE(cmd_flags);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+ if (!status && response_flags)
+ *response_flags = cmd->cmd_flags;
+
+ return status;
+}
+
+/**
+ * ixgbe_get_flash_bank_offset - Get offset into requested flash bank
+ * @hw: pointer to the HW structure
+ * @bank: whether to read from the active or inactive flash bank
+ * @module: the module to read from
+ *
+ * Based on the module, lookup the module offset from the beginning of the
+ * flash.
+ *
+ * Return: the flash offset. Note that a value of zero is invalid and must be
+ * treated as an error.
+ */
+static u32 ixgbe_get_flash_bank_offset(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank,
+ u16 module)
+{
+ struct ixgbe_bank_info *banks = &hw->flash.banks;
+ enum ixgbe_flash_bank active_bank;
+ bool second_bank_active;
+ u32 offset, size;
+
+ switch (module) {
+ case E610_SR_1ST_NVM_BANK_PTR:
+ offset = banks->nvm_ptr;
+ size = banks->nvm_size;
+ active_bank = banks->nvm_bank;
+ break;
+ case E610_SR_1ST_OROM_BANK_PTR:
+ offset = banks->orom_ptr;
+ size = banks->orom_size;
+ active_bank = banks->orom_bank;
+ break;
+ case E610_SR_NETLIST_BANK_PTR:
+ offset = banks->netlist_ptr;
+ size = banks->netlist_size;
+ active_bank = banks->netlist_bank;
+ break;
+ default:
+ return 0;
+ }
+
+ switch (active_bank) {
+ case IXGBE_1ST_FLASH_BANK:
+ second_bank_active = false;
+ break;
+ case IXGBE_2ND_FLASH_BANK:
+ second_bank_active = true;
+ break;
+ default:
+ return 0;
+ }
+
+ /* The second flash bank is stored immediately following the first
+ * bank. Based on whether the 1st or 2nd bank is active, and whether
+ * we want the active or inactive bank, calculate the desired offset.
+ */
+ switch (bank) {
+ case IXGBE_ACTIVE_FLASH_BANK:
+ return offset + (second_bank_active ? size : 0);
+ case IXGBE_INACTIVE_FLASH_BANK:
+ return offset + (second_bank_active ? 0 : size);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_flash_module - Read a word from one of the main NVM modules
+ * @hw: pointer to the HW structure
+ * @bank: which bank of the module to read
+ * @module: the module to read
+ * @offset: the offset into the module in bytes
+ * @data: storage for the word read from the flash
+ * @length: bytes of data to read
+ *
+ * Read data from the specified flash module. The bank parameter indicates
+ * whether or not to read from the active bank or the inactive bank of that
+ * module.
+ *
+ * The word will be read using flat NVM access, and relies on the
+ * hw->flash.banks data being setup by ixgbe_determine_active_flash_banks()
+ * during initialization.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_read_flash_module(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank,
+ u16 module, u32 offset, u8 *data, u32 length)
+{
+ s32 status;
+ u32 start;
+
+ start = ixgbe_get_flash_bank_offset(hw, bank, module);
+ if (!start) {
+ return IXGBE_ERR_PARAM;
+ }
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+ if (status)
+ return status;
+
+ status = ixgbe_read_flat_nvm(hw, start + offset, &length, data, false);
+
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_read_netlist_module - Read data from the netlist module area
+ * @hw: pointer to the HW structure
+ * @bank: whether to read from the active or inactive module
+ * @offset: offset into the netlist to read from
+ * @data: storage for returned word value
+ *
+ * Read a word from the specified netlist bank.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_read_netlist_module(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank,
+ u32 offset, u16 *data)
+{
+ __le16 data_local;
+ s32 status;
+
+ status = ixgbe_read_flash_module(hw, bank, E610_SR_NETLIST_BANK_PTR,
+ offset * sizeof(u16),
+ (u8 *)&data_local,
+ sizeof(u16));
+ if (!status)
+ *data = IXGBE_LE16_TO_CPU(data_local);
+
+ return status;
+}
+
+/**
+ * ixgbe_read_nvm_module - Read from the active main NVM module
+ * @hw: pointer to the HW structure
+ * @bank: whether to read from active or inactive NVM module
+ * @offset: offset into the NVM module to read, in words
+ * @data: storage for returned word value
+ *
+ * Read the specified word from the active NVM module. This includes the CSS
+ * header at the start of the NVM module.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_read_nvm_module(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank,
+ u32 offset, u16 *data)
+{
+ __le16 data_local;
+ s32 status;
+
+ status = ixgbe_read_flash_module(hw, bank, E610_SR_1ST_NVM_BANK_PTR,
+ offset * sizeof(u16),
+ (u8 *)&data_local,
+ sizeof(u16));
+ if (!status)
+ *data = IXGBE_LE16_TO_CPU(data_local);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_nvm_css_hdr_len - Read the CSS header length from the
+ * NVM CSS header
+ * @hw: pointer to the HW struct
+ * @bank: whether to read from the active or inactive flash bank
+ * @hdr_len: storage for header length in words
+ *
+ * Read the CSS header length from the NVM CSS header and add the
+ * Authentication header size, and then convert to words.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_get_nvm_css_hdr_len(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank,
+ u32 *hdr_len)
+{
+ u16 hdr_len_l, hdr_len_h;
+ u32 hdr_len_dword;
+ s32 status;
+
+ status = ixgbe_read_nvm_module(hw, bank, IXGBE_NVM_CSS_HDR_LEN_L,
+ &hdr_len_l);
+ if (status)
+ return status;
+
+ status = ixgbe_read_nvm_module(hw, bank, IXGBE_NVM_CSS_HDR_LEN_H,
+ &hdr_len_h);
+ if (status)
+ return status;
+
+ /* CSS header length is in DWORD, so convert to words and add
+ * authentication header size
+ */
+ hdr_len_dword = hdr_len_h << 16 | hdr_len_l;
+ *hdr_len = (hdr_len_dword * 2) + IXGBE_NVM_AUTH_HEADER_LEN;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_nvm_sr_copy - Read a word from the Shadow RAM copy in the NVM bank
+ * @hw: pointer to the HW structure
+ * @bank: whether to read from the active or inactive NVM module
+ * @offset: offset into the Shadow RAM copy to read, in words
+ * @data: storage for returned word value
+ *
+ * Read the specified word from the copy of the Shadow RAM found in the
+ * specified NVM module.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_read_nvm_sr_copy(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank,
+ u32 offset, u16 *data)
+{
+ u32 hdr_len;
+ s32 status;
+
+ status = ixgbe_get_nvm_css_hdr_len(hw, bank, &hdr_len);
+ if (status)
+ return status;
+
+ hdr_len = ROUND_UP(hdr_len, 32);
+
+ return ixgbe_read_nvm_module(hw, bank, hdr_len + offset, data);
+}
+
+/**
+ * ixgbe_get_nvm_minsrevs - Get the minsrevs values from flash
+ * @hw: pointer to the HW struct
+ * @minsrevs: structure to store NVM and OROM minsrev values
+ *
+ * Read the Minimum Security Revision TLV and extract
+ * the revision values from the flash image
+ * into a readable structure for processing.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_nvm_minsrevs(struct ixgbe_hw *hw,
+ struct ixgbe_minsrev_info *minsrevs)
+{
+ struct ixgbe_aci_cmd_nvm_minsrev data;
+ s32 status;
+ u16 valid;
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+ if (status)
+ return status;
+
+ status = ixgbe_aci_read_nvm(hw, IXGBE_ACI_NVM_MINSREV_MOD_ID,
+ 0, sizeof(data), &data,
+ true, false);
+
+ ixgbe_release_nvm(hw);
+
+ if (status)
+ return status;
+
+ valid = IXGBE_LE16_TO_CPU(data.validity);
+
+ /* Extract NVM minimum security revision */
+ if (valid & IXGBE_ACI_NVM_MINSREV_NVM_VALID) {
+ u16 minsrev_l = IXGBE_LE16_TO_CPU(data.nvm_minsrev_l);
+ u16 minsrev_h = IXGBE_LE16_TO_CPU(data.nvm_minsrev_h);
+
+ minsrevs->nvm = minsrev_h << 16 | minsrev_l;
+ minsrevs->nvm_valid = true;
+ }
+
+ /* Extract the OROM minimum security revision */
+ if (valid & IXGBE_ACI_NVM_MINSREV_OROM_VALID) {
+ u16 minsrev_l = IXGBE_LE16_TO_CPU(data.orom_minsrev_l);
+ u16 minsrev_h = IXGBE_LE16_TO_CPU(data.orom_minsrev_h);
+
+ minsrevs->orom = minsrev_h << 16 | minsrev_l;
+ minsrevs->orom_valid = true;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_update_nvm_minsrevs - Update minsrevs TLV data in flash
+ * @hw: pointer to the HW struct
+ * @minsrevs: minimum security revision information
+ *
+ * Update the NVM or Option ROM minimum security revision fields in the PFA
+ * area of the flash. Reads the minsrevs->nvm_valid and minsrevs->orom_valid
+ * fields to determine what update is being requested. If the valid bit is not
+ * set for that module, then the associated minsrev will be left as is.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_update_nvm_minsrevs(struct ixgbe_hw *hw,
+ struct ixgbe_minsrev_info *minsrevs)
+{
+ struct ixgbe_aci_cmd_nvm_minsrev data;
+ s32 status;
+
+ if (!minsrevs->nvm_valid && !minsrevs->orom_valid) {
+ return IXGBE_ERR_PARAM;
+ }
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_WRITE);
+ if (status)
+ return status;
+
+ /* Get current data */
+ status = ixgbe_aci_read_nvm(hw, IXGBE_ACI_NVM_MINSREV_MOD_ID, 0,
+ sizeof(data), &data, true, false);
+ if (status)
+ goto exit_release_res;
+
+ if (minsrevs->nvm_valid) {
+ data.nvm_minsrev_l = IXGBE_CPU_TO_LE16(minsrevs->nvm & 0xFFFF);
+ data.nvm_minsrev_h = IXGBE_CPU_TO_LE16(minsrevs->nvm >> 16);
+ data.validity |=
+ IXGBE_CPU_TO_LE16(IXGBE_ACI_NVM_MINSREV_NVM_VALID);
+ }
+
+ if (minsrevs->orom_valid) {
+ data.orom_minsrev_l = IXGBE_CPU_TO_LE16(minsrevs->orom & 0xFFFF);
+ data.orom_minsrev_h = IXGBE_CPU_TO_LE16(minsrevs->orom >> 16);
+ data.validity |=
+ IXGBE_CPU_TO_LE16(IXGBE_ACI_NVM_MINSREV_OROM_VALID);
+ }
+
+ /* Update flash data */
+ status = ixgbe_aci_update_nvm(hw, IXGBE_ACI_NVM_MINSREV_MOD_ID, 0,
+ sizeof(data), &data, false,
+ IXGBE_ACI_NVM_SPECIAL_UPDATE);
+ if (status)
+ goto exit_release_res;
+
+ /* Dump the Shadow RAM to the flash */
+ status = ixgbe_nvm_write_activate(hw, 0, NULL);
+
+exit_release_res:
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_nvm_srev - Read the security revision from the NVM CSS header
+ * @hw: pointer to the HW struct
+ * @bank: whether to read from the active or inactive flash bank
+ * @srev: storage for security revision
+ *
+ * Read the security revision out of the CSS header of the active NVM module
+ * bank.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_get_nvm_srev(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank, u32 *srev)
+{
+ u16 srev_l, srev_h;
+ s32 status;
+
+ status = ixgbe_read_nvm_module(hw, bank, IXGBE_NVM_CSS_SREV_L, &srev_l);
+ if (status)
+ return status;
+
+ status = ixgbe_read_nvm_module(hw, bank, IXGBE_NVM_CSS_SREV_H, &srev_h);
+ if (status)
+ return status;
+
+ *srev = srev_h << 16 | srev_l;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_nvm_ver_info - Read NVM version information
+ * @hw: pointer to the HW struct
+ * @bank: whether to read from the active or inactive flash bank
+ * @nvm: pointer to NVM info structure
+ *
+ * Read the NVM EETRACK ID and map version of the main NVM image bank, filling
+ * in the nvm info structure.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_get_nvm_ver_info(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank,
+ struct ixgbe_nvm_info *nvm)
+{
+ u16 eetrack_lo, eetrack_hi, ver;
+ s32 status;
+
+ status = ixgbe_read_nvm_sr_copy(hw, bank,
+ E610_SR_NVM_DEV_STARTER_VER, &ver);
+ if (status) {
+ return status;
+ }
+
+ nvm->major = (ver & E610_NVM_VER_HI_MASK) >> E610_NVM_VER_HI_SHIFT;
+ nvm->minor = (ver & E610_NVM_VER_LO_MASK) >> E610_NVM_VER_LO_SHIFT;
+
+ status = ixgbe_read_nvm_sr_copy(hw, bank, E610_SR_NVM_EETRACK_LO,
+ &eetrack_lo);
+ if (status) {
+ return status;
+ }
+ status = ixgbe_read_nvm_sr_copy(hw, bank, E610_SR_NVM_EETRACK_HI,
+ &eetrack_hi);
+ if (status) {
+ return status;
+ }
+
+ nvm->eetrack = (eetrack_hi << 16) | eetrack_lo;
+
+ status = ixgbe_get_nvm_srev(hw, bank, &nvm->srev);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_inactive_nvm_ver - Read Option ROM version from the inactive bank
+ * @hw: pointer to the HW structure
+ * @nvm: storage for Option ROM version information
+ *
+ * Reads the NVM EETRACK ID, Map version, and security revision of the
+ * inactive NVM bank. Used to access version data for a pending update that
+ * has not yet been activated.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_inactive_nvm_ver(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm)
+{
+ return ixgbe_get_nvm_ver_info(hw, IXGBE_INACTIVE_FLASH_BANK, nvm);
+}
+
+/**
+ * ixgbe_get_active_nvm_ver - Read Option ROM version from the active bank
+ * @hw: pointer to the HW structure
+ * @nvm: storage for Option ROM version information
+ *
+ * Reads the NVM EETRACK ID, Map version, and security revision of the
+ * active NVM bank.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_active_nvm_ver(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm)
+{
+ return ixgbe_get_nvm_ver_info(hw, IXGBE_ACTIVE_FLASH_BANK, nvm);
+}
+
+/**
+ * ixgbe_get_netlist_info
+ * @hw: pointer to the HW struct
+ * @bank: whether to read from the active or inactive flash bank
+ * @netlist: pointer to netlist version info structure
+ *
+ * Get the netlist version information from the requested bank. Reads the Link
+ * Topology section to find the Netlist ID block and extract the relevant
+ * information into the netlist version structure.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_get_netlist_info(struct ixgbe_hw *hw,
+ enum ixgbe_bank_select bank,
+ struct ixgbe_netlist_info *netlist)
+{
+ u16 module_id, length, node_count, i;
+ u16 *id_blk;
+ s32 status;
+
+ status = ixgbe_read_netlist_module(hw, bank, IXGBE_NETLIST_TYPE_OFFSET,
+ &module_id);
+ if (status)
+ return status;
+
+ if (module_id != IXGBE_NETLIST_LINK_TOPO_MOD_ID) {
+ return IXGBE_ERR_NVM;
+ }
+
+ status = ixgbe_read_netlist_module(hw, bank, IXGBE_LINK_TOPO_MODULE_LEN,
+ &length);
+ if (status)
+ return status;
+
+ /* sanity check that we have at least enough words to store the
+ * netlist ID block
+ */
+ if (length < IXGBE_NETLIST_ID_BLK_SIZE) {
+ return IXGBE_ERR_NVM;
+ }
+
+ status = ixgbe_read_netlist_module(hw, bank, IXGBE_LINK_TOPO_NODE_COUNT,
+ &node_count);
+ if (status)
+ return status;
+ node_count &= IXGBE_LINK_TOPO_NODE_COUNT_M;
+
+ id_blk = (u16 *)ixgbe_calloc(hw, IXGBE_NETLIST_ID_BLK_SIZE,
+ sizeof(*id_blk));
+ if (!id_blk)
+ return IXGBE_ERR_NO_SPACE;
+
+ /* Read out the entire Netlist ID Block at once. */
+ status = ixgbe_read_flash_module(hw, bank, E610_SR_NETLIST_BANK_PTR,
+ IXGBE_NETLIST_ID_BLK_OFFSET(node_count) * sizeof(u16),
+ (u8 *)id_blk,
+ IXGBE_NETLIST_ID_BLK_SIZE * sizeof(u16));
+ if (status)
+ goto exit_error;
+
+ for (i = 0; i < IXGBE_NETLIST_ID_BLK_SIZE; i++)
+ id_blk[i] = IXGBE_LE16_TO_CPU(((__le16 *)id_blk)[i]);
+
+ netlist->major = id_blk[IXGBE_NETLIST_ID_BLK_MAJOR_VER_HIGH] << 16 |
+ id_blk[IXGBE_NETLIST_ID_BLK_MAJOR_VER_LOW];
+ netlist->minor = id_blk[IXGBE_NETLIST_ID_BLK_MINOR_VER_HIGH] << 16 |
+ id_blk[IXGBE_NETLIST_ID_BLK_MINOR_VER_LOW];
+ netlist->type = id_blk[IXGBE_NETLIST_ID_BLK_TYPE_HIGH] << 16 |
+ id_blk[IXGBE_NETLIST_ID_BLK_TYPE_LOW];
+ netlist->rev = id_blk[IXGBE_NETLIST_ID_BLK_REV_HIGH] << 16 |
+ id_blk[IXGBE_NETLIST_ID_BLK_REV_LOW];
+ netlist->cust_ver = id_blk[IXGBE_NETLIST_ID_BLK_CUST_VER];
+ /* Read the left most 4 bytes of SHA */
+ netlist->hash = id_blk[IXGBE_NETLIST_ID_BLK_SHA_HASH_WORD(15)] << 16 |
+ id_blk[IXGBE_NETLIST_ID_BLK_SHA_HASH_WORD(14)];
+
+exit_error:
+ ixgbe_free(hw, id_blk);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_inactive_netlist_ver
+ * @hw: pointer to the HW struct
+ * @netlist: pointer to netlist version info structure
+ *
+ * Read the netlist version data from the inactive netlist bank. Used to
+ * extract version data of a pending flash update in order to display the
+ * version data.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_inactive_netlist_ver(struct ixgbe_hw *hw,
+ struct ixgbe_netlist_info *netlist)
+{
+ return ixgbe_get_netlist_info(hw, IXGBE_INACTIVE_FLASH_BANK, netlist);
+}
+
+/**
+ * ixgbe_read_sr_pointer - Read the value of a Shadow RAM pointer word
+ * @hw: pointer to the HW structure
+ * @offset: the word offset of the Shadow RAM word to read
+ * @pointer: pointer value read from Shadow RAM
+ *
+ * Read the given Shadow RAM word, and convert it to a pointer value specified
+ * in bytes. This function assumes the specified offset is a valid pointer
+ * word.
+ *
+ * Each pointer word specifies whether it is stored in word size or 4KB
+ * sector size by using the highest bit. The reported pointer value will be in
+ * bytes, intended for flat NVM reads.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_read_sr_pointer(struct ixgbe_hw *hw, u16 offset, u32 *pointer)
+{
+ s32 status;
+ u16 value;
+
+ status = ixgbe_read_ee_aci_E610(hw, offset, &value);
+ if (status)
+ return status;
+
+ /* Determine if the pointer is in 4KB or word units */
+ if (value & IXGBE_SR_NVM_PTR_4KB_UNITS)
+ *pointer = (value & ~IXGBE_SR_NVM_PTR_4KB_UNITS) * 4 * 1024;
+ else
+ *pointer = value * 2;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_sr_area_size - Read an area size from a Shadow RAM word
+ * @hw: pointer to the HW structure
+ * @offset: the word offset of the Shadow RAM to read
+ * @size: size value read from the Shadow RAM
+ *
+ * Read the given Shadow RAM word, and convert it to an area size value
+ * specified in bytes. This function assumes the specified offset is a valid
+ * area size word.
+ *
+ * Each area size word is specified in 4KB sector units. This function reports
+ * the size in bytes, intended for flat NVM reads.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_read_sr_area_size(struct ixgbe_hw *hw, u16 offset, u32 *size)
+{
+ s32 status;
+ u16 value;
+
+ status = ixgbe_read_ee_aci_E610(hw, offset, &value);
+ if (status)
+ return status;
+
+ /* Area sizes are always specified in 4KB units */
+ *size = value * 4 * 1024;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_discover_flash_size - Discover the available flash size.
+ * @hw: pointer to the HW struct
+ *
+ * The device flash could be up to 16MB in size. However, it is possible that
+ * the actual size is smaller. Use bisection to determine the accessible size
+ * of flash memory.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_discover_flash_size(struct ixgbe_hw *hw)
+{
+ u32 min_size = 0, max_size = IXGBE_ACI_NVM_MAX_OFFSET + 1;
+ s32 status;
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+ if (status)
+ return status;
+
+ while ((max_size - min_size) > 1) {
+ u32 offset = (max_size + min_size) / 2;
+ u32 len = 1;
+ u8 data;
+
+ status = ixgbe_read_flat_nvm(hw, offset, &len, &data, false);
+ if (status == IXGBE_ERR_ACI_ERROR &&
+ hw->aci.last_status == IXGBE_ACI_RC_EINVAL) {
+ status = IXGBE_SUCCESS;
+ max_size = offset;
+ } else if (!status) {
+ min_size = offset;
+ } else {
+ /* an unexpected error occurred */
+ goto err_read_flat_nvm;
+ }
+ }
+
+ hw->flash.flash_size = max_size;
+
+err_read_flat_nvm:
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_determine_active_flash_banks - Discover active bank for each module
+ * @hw: pointer to the HW struct
+ *
+ * Read the Shadow RAM control word and determine which banks are active for
+ * the NVM, OROM, and Netlist modules. Also read and calculate the associated
+ * pointer and size. These values are then cached into the ixgbe_flash_info
+ * structure for later use in order to calculate the correct offset to read
+ * from the active module.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_determine_active_flash_banks(struct ixgbe_hw *hw)
+{
+ struct ixgbe_bank_info *banks = &hw->flash.banks;
+ u16 ctrl_word;
+ s32 status;
+
+ status = ixgbe_read_ee_aci_E610(hw, E610_SR_NVM_CTRL_WORD, &ctrl_word);
+ if (status) {
+ return status;
+ }
+
+ /* Check that the control word indicates validity */
+ if ((ctrl_word & IXGBE_SR_CTRL_WORD_1_M) >> IXGBE_SR_CTRL_WORD_1_S !=
+ IXGBE_SR_CTRL_WORD_VALID) {
+ return IXGBE_ERR_CONFIG;
+ }
+
+ if (!(ctrl_word & IXGBE_SR_CTRL_WORD_NVM_BANK))
+ banks->nvm_bank = IXGBE_1ST_FLASH_BANK;
+ else
+ banks->nvm_bank = IXGBE_2ND_FLASH_BANK;
+
+ if (!(ctrl_word & IXGBE_SR_CTRL_WORD_OROM_BANK))
+ banks->orom_bank = IXGBE_1ST_FLASH_BANK;
+ else
+ banks->orom_bank = IXGBE_2ND_FLASH_BANK;
+
+ if (!(ctrl_word & IXGBE_SR_CTRL_WORD_NETLIST_BANK))
+ banks->netlist_bank = IXGBE_1ST_FLASH_BANK;
+ else
+ banks->netlist_bank = IXGBE_2ND_FLASH_BANK;
+
+ status = ixgbe_read_sr_pointer(hw, E610_SR_1ST_NVM_BANK_PTR,
+ &banks->nvm_ptr);
+ if (status) {
+ return status;
+ }
+
+ status = ixgbe_read_sr_area_size(hw, E610_SR_NVM_BANK_SIZE,
+ &banks->nvm_size);
+ if (status) {
+ return status;
+ }
+
+ status = ixgbe_read_sr_pointer(hw, E610_SR_1ST_OROM_BANK_PTR,
+ &banks->orom_ptr);
+ if (status) {
+ return status;
+ }
+
+ status = ixgbe_read_sr_area_size(hw, E610_SR_OROM_BANK_SIZE,
+ &banks->orom_size);
+ if (status) {
+ return status;
+ }
+
+ status = ixgbe_read_sr_pointer(hw, E610_SR_NETLIST_BANK_PTR,
+ &banks->netlist_ptr);
+ if (status) {
+ return status;
+ }
+
+ status = ixgbe_read_sr_area_size(hw, E610_SR_NETLIST_BANK_SIZE,
+ &banks->netlist_size);
+ if (status) {
+ return status;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_init_nvm - initializes NVM setting
+ * @hw: pointer to the HW struct
+ *
+ * Read and populate NVM settings such as Shadow RAM size,
+ * max_timeout, and blank_nvm_mode
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_init_nvm(struct ixgbe_hw *hw)
+{
+ struct ixgbe_flash_info *flash = &hw->flash;
+ u32 fla, gens_stat, status;
+ u8 sr_size;
+
+ /* The SR size is stored regardless of the NVM programming mode
+ * as the blank mode may be used in the factory line.
+ */
+ gens_stat = IXGBE_READ_REG(hw, GLNVM_GENS);
+ sr_size = (gens_stat & GLNVM_GENS_SR_SIZE_M) >> GLNVM_GENS_SR_SIZE_S;
+
+ /* Switching to words (sr_size contains power of 2) */
+ flash->sr_words = BIT(sr_size) * IXGBE_SR_WORDS_IN_1KB;
+
+ /* Check if we are in the normal or blank NVM programming mode */
+ fla = IXGBE_READ_REG(hw, GLNVM_FLA);
+ if (fla & GLNVM_FLA_LOCKED_M) { /* Normal programming mode */
+ flash->blank_nvm_mode = false;
+ } else {
+ /* Blank programming mode */
+ flash->blank_nvm_mode = true;
+ return IXGBE_ERR_NVM_BLANK_MODE;
+ }
+
+ status = ixgbe_discover_flash_size(hw);
+ if (status) {
+ return status;
+ }
+
+ status = ixgbe_determine_active_flash_banks(hw);
+ if (status) {
+ return status;
+ }
+
+ status = ixgbe_get_nvm_ver_info(hw, IXGBE_ACTIVE_FLASH_BANK,
+ &flash->nvm);
+ if (status) {
+ return status;
+ }
+
+ /* read the netlist version information */
+ status = ixgbe_get_netlist_info(hw, IXGBE_ACTIVE_FLASH_BANK,
+ &flash->netlist);
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_sanitize_operate - Clear the user data
+ * @hw: pointer to the HW struct
+ *
+ * Clear user data from NVM using ACI command (0x070C).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_sanitize_operate(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u8 values;
+
+ u8 cmd_flags = IXGBE_ACI_SANITIZE_REQ_OPERATE |
+ IXGBE_ACI_SANITIZE_OPERATE_SUBJECT_CLEAR;
+
+ status = ixgbe_sanitize_nvm(hw, cmd_flags, &values);
+ if (status)
+ return status;
+ if ((!(values & IXGBE_ACI_SANITIZE_OPERATE_HOST_CLEAN_DONE) &&
+ !(values & IXGBE_ACI_SANITIZE_OPERATE_BMC_CLEAN_DONE)) ||
+ ((values & IXGBE_ACI_SANITIZE_OPERATE_HOST_CLEAN_DONE) &&
+ !(values & IXGBE_ACI_SANITIZE_OPERATE_HOST_CLEAN_SUCCESS)) ||
+ ((values & IXGBE_ACI_SANITIZE_OPERATE_BMC_CLEAN_DONE) &&
+ !(values & IXGBE_ACI_SANITIZE_OPERATE_BMC_CLEAN_SUCCESS)))
+ return IXGBE_ERR_ACI_ERROR;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_sanitize_nvm - Sanitize NVM
+ * @hw: pointer to the HW struct
+ * @cmd_flags: flag to the ACI command
+ * @values: values returned from the command
+ *
+ * Sanitize NVM using ACI command (0x070C).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_sanitize_nvm(struct ixgbe_hw *hw, u8 cmd_flags, u8 *values)
+{
+ struct ixgbe_aci_desc desc;
+ struct ixgbe_aci_cmd_nvm_sanitization *cmd;
+ s32 status;
+
+ cmd = &desc.params.nvm_sanitization;
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_nvm_sanitization);
+ cmd->cmd_flags = cmd_flags;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+ if (values)
+ *values = cmd->values;
+
+ return status;
+}
+
+/**
+ * ixgbe_read_sr_word_aci - Reads Shadow RAM via ACI
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF)
+ * @data: word read from the Shadow RAM
+ *
+ * Reads one 16 bit word from the Shadow RAM using ixgbe_read_flat_nvm.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_read_sr_word_aci(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ u32 bytes = sizeof(u16);
+ __le16 data_local;
+ s32 status;
+
+ status = ixgbe_read_flat_nvm(hw, offset * sizeof(u16), &bytes,
+ (u8 *)&data_local, true);
+ if (status)
+ return status;
+
+ *data = IXGBE_LE16_TO_CPU(data_local);
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_sr_buf_aci - Reads Shadow RAM buf via ACI
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM word to read (0x000000 - 0x001FFF)
+ * @words: (in) number of words to read; (out) number of words actually read
+ * @data: words read from the Shadow RAM
+ *
+ * Reads 16 bit words (data buf) from the Shadow RAM. Ownership of the NVM is
+ * taken before reading the buffer and later released.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_read_sr_buf_aci(struct ixgbe_hw *hw, u16 offset, u16 *words,
+ u16 *data)
+{
+ u32 bytes = *words * 2, i;
+ s32 status;
+
+ status = ixgbe_read_flat_nvm(hw, offset * 2, &bytes, (u8 *)data, true);
+
+ *words = bytes / 2;
+
+ for (i = 0; i < *words; i++)
+ data[i] = IXGBE_LE16_TO_CPU(((__le16 *)data)[i]);
+
+ return status;
+}
+
+/**
+ * ixgbe_read_flat_nvm - Read portion of NVM by flat offset
+ * @hw: pointer to the HW struct
+ * @offset: offset from beginning of NVM
+ * @length: (in) number of bytes to read; (out) number of bytes actually read
+ * @data: buffer to return data in (sized to fit the specified length)
+ * @read_shadow_ram: if true, read from shadow RAM instead of NVM
+ *
+ * Reads a portion of the NVM, as a flat memory space. This function correctly
+ * breaks read requests across Shadow RAM sectors, prevents Shadow RAM size
+ * from being exceeded in case of Shadow RAM read requests and ensures that no
+ * single read request exceeds the maximum 4KB read for a single admin command.
+ *
+ * Returns a status code on failure. Note that the data pointer may be
+ * partially updated if some reads succeed before a failure.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_read_flat_nvm(struct ixgbe_hw *hw, u32 offset, u32 *length,
+ u8 *data, bool read_shadow_ram)
+{
+ u32 inlen = *length;
+ u32 bytes_read = 0;
+ bool last_cmd;
+ s32 status;
+
+ *length = 0;
+
+ /* Verify the length of the read if this is for the Shadow RAM */
+ if (read_shadow_ram && ((offset + inlen) >
+ (hw->eeprom.word_size * 2u))) {
+ return IXGBE_ERR_PARAM;
+ }
+
+ do {
+ u32 read_size, sector_offset;
+
+ /* ixgbe_aci_read_nvm cannot read more than 4KB at a time.
+ * Additionally, a read from the Shadow RAM may not cross over
+ * a sector boundary. Conveniently, the sector size is also 4KB.
+ */
+ sector_offset = offset % IXGBE_ACI_MAX_BUFFER_SIZE;
+ read_size = MIN_T(u32,
+ IXGBE_ACI_MAX_BUFFER_SIZE - sector_offset,
+ inlen - bytes_read);
+
+ last_cmd = !(bytes_read + read_size < inlen);
+
+ /* ixgbe_aci_read_nvm takes the length as a u16. Our read_size
+ * is calculated using a u32, but the IXGBE_ACI_MAX_BUFFER_SIZE
+ * maximum size guarantees that it will fit within the 2 bytes.
+ */
+ status = ixgbe_aci_read_nvm(hw, IXGBE_ACI_NVM_START_POINT,
+ offset, (u16)read_size,
+ data + bytes_read, last_cmd,
+ read_shadow_ram);
+ if (status)
+ break;
+
+ bytes_read += read_size;
+ offset += read_size;
+ } while (!last_cmd);
+
+ *length = bytes_read;
+ return status;
+}
+
+/**
+ * ixgbe_check_sr_access_params - verify params for Shadow RAM R/W operations.
+ * @hw: pointer to the HW structure
+ * @offset: offset in words from module start
+ * @words: number of words to access
+ *
+ * Check if all the parameters are valid
+ * before performing any Shadow RAM read/write operations.
+ *
+ * Return: the exit code of the operation.
+ * * - IXGBE_SUCCESS - success.
+ * * - IXGBE_ERR_PARAM - NVM error: offset beyond SR limit or
+ * NVM error: tried to access more words then the set limit or
+ * NVM error: cannot spread over two sectors.
+ */
+static s32 ixgbe_check_sr_access_params(struct ixgbe_hw *hw, u32 offset,
+ u16 words)
+{
+ if ((offset + words) > hw->eeprom.word_size) {
+ return IXGBE_ERR_PARAM;
+ }
+
+ if (words > IXGBE_SR_SECTOR_SIZE_IN_WORDS) {
+ /* We can access only up to 4KB (one sector),
+ * in one Admin Command write
+ */
+ return IXGBE_ERR_PARAM;
+ }
+
+ if (((offset + (words - 1)) / IXGBE_SR_SECTOR_SIZE_IN_WORDS) !=
+ (offset / IXGBE_SR_SECTOR_SIZE_IN_WORDS)) {
+ /* A single access cannot spread over two sectors */
+ return IXGBE_ERR_PARAM;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_sr_word_aci - Writes Shadow RAM word
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM word to write
+ * @data: word to write to the Shadow RAM
+ *
+ * Writes a 16 bit word to the Shadow RAM using the admin command.
+ * NVM ownership must be acquired before calling this function and released
+ * by a caller. To commit SR to NVM update checksum function should be called.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_write_sr_word_aci(struct ixgbe_hw *hw, u32 offset, const u16 *data)
+{
+ __le16 data_local = IXGBE_CPU_TO_LE16(*data);
+ s32 status;
+
+ status = ixgbe_check_sr_access_params(hw, offset, 1);
+ if (!status)
+ status = ixgbe_aci_update_nvm(hw, 0, BYTES_PER_WORD * offset,
+ BYTES_PER_WORD, &data_local,
+ false, 0);
+
+ return status;
+}
+
+/**
+ * ixgbe_write_sr_buf_aci - Writes Shadow RAM buf
+ * @hw: pointer to the HW structure
+ * @offset: offset of the Shadow RAM buffer to write
+ * @words: number of words to write
+ * @data: words to write to the Shadow RAM
+ *
+ * Writes a 16 bit word to the Shadow RAM using the admin command.
+ * NVM ownership must be acquired before calling this function and released
+ * by a caller. To commit SR to NVM update checksum function should be called.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_write_sr_buf_aci(struct ixgbe_hw *hw, u32 offset, u16 words,
+ const u16 *data)
+{
+ __le16 *data_local;
+ s32 status;
+ void *vmem;
+ u32 i;
+
+ vmem = ixgbe_calloc(hw, words, sizeof(u16));
+ if (!vmem)
+ return IXGBE_ERR_OUT_OF_MEM;
+ data_local = (__le16 *)vmem;
+
+ for (i = 0; i < words; i++)
+ data_local[i] = IXGBE_CPU_TO_LE16(data[i]);
+
+ /* Here we will only write one buffer as the size of the modules
+ * mirrored in the Shadow RAM is always less than 4K.
+ */
+ status = ixgbe_check_sr_access_params(hw, offset, words);
+ if (!status)
+ status = ixgbe_aci_update_nvm(hw, 0, BYTES_PER_WORD * offset,
+ BYTES_PER_WORD * words,
+ data_local, false, 0);
+
+ ixgbe_free(hw, vmem);
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_alternate_write - write to alternate structure
+ * @hw: pointer to the hardware structure
+ * @reg_addr0: address of first dword to be written
+ * @reg_val0: value to be written under 'reg_addr0'
+ * @reg_addr1: address of second dword to be written
+ * @reg_val1: value to be written under 'reg_addr1'
+ *
+ * Write one or two dwords to alternate structure using ACI command (0x0900).
+ * Fields are indicated by 'reg_addr0' and 'reg_addr1' register numbers.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_write(struct ixgbe_hw *hw, u32 reg_addr0,
+ u32 reg_val0, u32 reg_addr1, u32 reg_val1)
+{
+ struct ixgbe_aci_cmd_read_write_alt_direct *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.read_write_alt_direct;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_write_alt_direct);
+ cmd->dword0_addr = IXGBE_CPU_TO_LE32(reg_addr0);
+ cmd->dword1_addr = IXGBE_CPU_TO_LE32(reg_addr1);
+ cmd->dword0_value = IXGBE_CPU_TO_LE32(reg_val0);
+ cmd->dword1_value = IXGBE_CPU_TO_LE32(reg_val1);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_alternate_read - read from alternate structure
+ * @hw: pointer to the hardware structure
+ * @reg_addr0: address of first dword to be read
+ * @reg_val0: pointer for data read from 'reg_addr0'
+ * @reg_addr1: address of second dword to be read
+ * @reg_val1: pointer for data read from 'reg_addr1'
+ *
+ * Read one or two dwords from alternate structure using ACI command (0x0902).
+ * Fields are indicated by 'reg_addr0' and 'reg_addr1' register numbers.
+ * If 'reg_val1' pointer is not passed then only register at 'reg_addr0'
+ * is read.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_read(struct ixgbe_hw *hw, u32 reg_addr0,
+ u32 *reg_val0, u32 reg_addr1, u32 *reg_val1)
+{
+ struct ixgbe_aci_cmd_read_write_alt_direct *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.read_write_alt_direct;
+
+ if (!reg_val0)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_read_alt_direct);
+ cmd->dword0_addr = IXGBE_CPU_TO_LE32(reg_addr0);
+ cmd->dword1_addr = IXGBE_CPU_TO_LE32(reg_addr1);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ if (status == IXGBE_SUCCESS) {
+ *reg_val0 = IXGBE_LE32_TO_CPU(cmd->dword0_value);
+
+ if (reg_val1)
+ *reg_val1 = IXGBE_LE32_TO_CPU(cmd->dword1_value);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_alternate_write_done - check if writing to alternate structure
+ * is done
+ * @hw: pointer to the HW structure.
+ * @bios_mode: indicates whether the command is executed by UEFI or legacy BIOS
+ * @reset_needed: indicates the SW should trigger GLOBAL reset
+ *
+ * Indicates to the FW that alternate structures have been changed.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_write_done(struct ixgbe_hw *hw, u8 bios_mode,
+ bool *reset_needed)
+{
+ struct ixgbe_aci_cmd_done_alt_write *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.done_alt_write;
+
+ if (!reset_needed)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_done_alt_write);
+ cmd->flags = bios_mode;
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+ if (!status)
+ *reset_needed = (IXGBE_LE16_TO_CPU(cmd->flags) &
+ IXGBE_ACI_RESP_RESET_NEEDED) != 0;
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_alternate_clear - clear alternate structure
+ * @hw: pointer to the HW structure.
+ *
+ * Clear the alternate structures of the port from which the function
+ * is called.
+ *
+ * Return: 0 on success and error code on failure.
+ */
+s32 ixgbe_aci_alternate_clear(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc,
+ ixgbe_aci_opc_clear_port_alt_write);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+
+ return status;
+}
+
+/**
+ * ixgbe_aci_get_internal_data - get internal FW/HW data
+ * @hw: pointer to the hardware structure
+ * @cluster_id: specific cluster to dump
+ * @table_id: table ID within cluster
+ * @start: index of line in the block to read
+ * @buf: dump buffer
+ * @buf_size: dump buffer size
+ * @ret_buf_size: return buffer size (returned by FW)
+ * @ret_next_cluster: next cluster to read (returned by FW)
+ * @ret_next_table: next block to read (returned by FW)
+ * @ret_next_index: next index to read (returned by FW)
+ *
+ * Get internal FW/HW data using ACI command (0xFF08) for debug purposes.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_get_internal_data(struct ixgbe_hw *hw, u16 cluster_id,
+ u16 table_id, u32 start, void *buf,
+ u16 buf_size, u16 *ret_buf_size,
+ u16 *ret_next_cluster, u16 *ret_next_table,
+ u32 *ret_next_index)
+{
+ struct ixgbe_aci_cmd_debug_dump_internals *cmd;
+ struct ixgbe_aci_desc desc;
+ s32 status;
+
+ cmd = &desc.params.debug_dump;
+
+ if (buf_size == 0 || !buf)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc,
+ ixgbe_aci_opc_debug_dump_internals);
+
+ cmd->cluster_id = IXGBE_CPU_TO_LE16(cluster_id);
+ cmd->table_id = IXGBE_CPU_TO_LE16(table_id);
+ cmd->idx = IXGBE_CPU_TO_LE32(start);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, buf, buf_size);
+
+ if (!status) {
+ if (ret_buf_size)
+ *ret_buf_size = IXGBE_LE16_TO_CPU(desc.datalen);
+ if (ret_next_cluster)
+ *ret_next_cluster = IXGBE_LE16_TO_CPU(cmd->cluster_id);
+ if (ret_next_table)
+ *ret_next_table = IXGBE_LE16_TO_CPU(cmd->table_id);
+ if (ret_next_index)
+ *ret_next_index = IXGBE_LE32_TO_CPU(cmd->idx);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_validate_nvm_rw_reg - Check that an NVM access request is valid
+ * @cmd: NVM access command structure
+ *
+ * Validates that an NVM access structure is request to read or write a valid
+ * register offset. First validates that the module and flags are correct, and
+ * then ensures that the register offset is one of the accepted registers.
+ *
+ * Return: 0 if the register access is valid, out of range error code otherwise.
+ */
+static s32
+ixgbe_validate_nvm_rw_reg(struct ixgbe_nvm_access_cmd *cmd)
+{
+ u16 i;
+
+ switch (cmd->offset) {
+ case GL_HICR:
+ case GL_HICR_EN: /* Note, this register is read only */
+ case GL_FWSTS:
+ case GL_MNG_FWSM:
+ case GLNVM_GENS:
+ case GLNVM_FLA:
+ case GL_FWRESETCNT:
+ return 0;
+ default:
+ break;
+ }
+
+ for (i = 0; i <= GL_HIDA_MAX_INDEX; i++)
+ if (cmd->offset == (u32)GL_HIDA(i))
+ return 0;
+
+ for (i = 0; i <= GL_HIBA_MAX_INDEX; i++)
+ if (cmd->offset == (u32)GL_HIBA(i))
+ return 0;
+
+ /* All other register offsets are not valid */
+ return IXGBE_ERR_OUT_OF_RANGE;
+}
+
+/**
+ * ixgbe_nvm_access_read - Handle an NVM read request
+ * @hw: pointer to the HW struct
+ * @cmd: NVM access command to process
+ * @data: storage for the register value read
+ *
+ * Process an NVM access request to read a register.
+ *
+ * Return: 0 if the register read is valid and successful,
+ * out of range error code otherwise.
+ */
+static s32 ixgbe_nvm_access_read(struct ixgbe_hw *hw,
+ struct ixgbe_nvm_access_cmd *cmd,
+ struct ixgbe_nvm_access_data *data)
+{
+ s32 status;
+
+ /* Always initialize the output data, even on failure */
+ memset(&data->regval, 0, cmd->data_size);
+
+ /* Make sure this is a valid read/write access request */
+ status = ixgbe_validate_nvm_rw_reg(cmd);
+ if (status)
+ return status;
+
+ DEBUGOUT1("NVM access: reading register %08x\n", cmd->offset);
+
+ /* Read the register and store the contents in the data field */
+ data->regval = IXGBE_READ_REG(hw, cmd->offset);
+
+ return 0;
+}
+
+/**
+ * ixgbe_nvm_access_write - Handle an NVM write request
+ * @hw: pointer to the HW struct
+ * @cmd: NVM access command to process
+ * @data: NVM access data to write
+ *
+ * Process an NVM access request to write a register.
+ *
+ * Return: 0 if the register write is valid and successful,
+ * out of range error code otherwise.
+ */
+static s32 ixgbe_nvm_access_write(struct ixgbe_hw *hw,
+ struct ixgbe_nvm_access_cmd *cmd,
+ struct ixgbe_nvm_access_data *data)
+{
+ s32 status;
+
+ /* Make sure this is a valid read/write access request */
+ status = ixgbe_validate_nvm_rw_reg(cmd);
+ if (status)
+ return status;
+
+ /* Reject requests to write to read-only registers */
+ switch (cmd->offset) {
+ case GL_HICR_EN:
+ return IXGBE_ERR_OUT_OF_RANGE;
+ default:
+ break;
+ }
+
+ DEBUGOUT2("NVM access: writing register %08x with value %08x\n",
+ cmd->offset, data->regval);
+
+ /* Write the data field to the specified register */
+ IXGBE_WRITE_REG(hw, cmd->offset, data->regval);
+
+ return 0;
+}
+
+/**
+ * ixgbe_handle_nvm_access - Handle an NVM access request
+ * @hw: pointer to the HW struct
+ * @cmd: NVM access command info
+ * @data: pointer to read or return data
+ *
+ * Process an NVM access request. Read the command structure information and
+ * determine if it is valid. If not, report an error indicating the command
+ * was invalid.
+ *
+ * For valid commands, perform the necessary function, copying the data into
+ * the provided data buffer.
+ *
+ * Return: 0 if the nvm access request is valid and successful,
+ * error code otherwise.
+ */
+s32 ixgbe_handle_nvm_access(struct ixgbe_hw *hw,
+ struct ixgbe_nvm_access_cmd *cmd,
+ struct ixgbe_nvm_access_data *data)
+{
+ switch (cmd->command) {
+ case IXGBE_NVM_CMD_READ:
+ return ixgbe_nvm_access_read(hw, cmd, data);
+ case IXGBE_NVM_CMD_WRITE:
+ return ixgbe_nvm_access_write(hw, cmd, data);
+ default:
+ return IXGBE_ERR_PARAM;
+ }
+}
+
+/**
+ * ixgbe_aci_set_health_status_config - Configure FW health events
+ * @hw: pointer to the HW struct
+ * @event_source: type of diagnostic events to enable
+ *
+ * Configure the health status event types that the firmware will send to this
+ * PF using ACI command (0xFF20). The supported event types are: PF-specific,
+ * all PFs, and global.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_aci_set_health_status_config(struct ixgbe_hw *hw, u8 event_source)
+{
+ struct ixgbe_aci_cmd_set_health_status_config *cmd;
+ struct ixgbe_aci_desc desc;
+
+ cmd = &desc.params.set_health_status_config;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc,
+ ixgbe_aci_opc_set_health_status_config);
+
+ cmd->event_source = event_source;
+
+ return ixgbe_aci_send_cmd(hw, &desc, NULL, 0);
+}
+
+/**
+ * ixgbe_init_ops_E610 - Inits func ptrs and MAC type
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the function pointers and assign the MAC type for E610.
+ * Does not touch the hardware.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_init_ops_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ ret_val = ixgbe_init_ops_X550(hw);
+
+ /* MAC */
+ mac->ops.reset_hw = ixgbe_reset_hw_E610;
+ mac->ops.start_hw = ixgbe_start_hw_E610;
+ mac->ops.get_media_type = ixgbe_get_media_type_E610;
+ mac->ops.get_supported_physical_layer =
+ ixgbe_get_supported_physical_layer_E610;
+ mac->ops.get_san_mac_addr = NULL;
+ mac->ops.set_san_mac_addr = NULL;
+ mac->ops.get_wwn_prefix = NULL;
+ mac->ops.setup_link = ixgbe_setup_link_E610;
+ mac->ops.check_link = ixgbe_check_link_E610;
+ mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_E610;
+ mac->ops.setup_fc = ixgbe_setup_fc_E610;
+ mac->ops.fc_autoneg = ixgbe_fc_autoneg_E610;
+ mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_E610;
+ mac->ops.disable_rx = ixgbe_disable_rx_E610;
+ mac->ops.setup_eee = ixgbe_setup_eee_E610;
+ mac->ops.fw_recovery_mode = ixgbe_fw_recovery_mode_E610;
+ mac->ops.fw_rollback_mode = ixgbe_fw_rollback_mode_E610;
+ mac->ops.get_fw_tsam_mode = ixgbe_get_fw_tsam_mode_E610;
+ mac->ops.get_fw_version = ixgbe_aci_get_fw_ver;
+ mac->ops.get_nvm_version = ixgbe_get_active_nvm_ver;
+ mac->ops.get_thermal_sensor_data = NULL;
+ mac->ops.init_thermal_sensor_thresh = NULL;
+
+ /* PHY */
+ phy->ops.init = ixgbe_init_phy_ops_E610;
+ phy->ops.identify = ixgbe_identify_phy_E610;
+ phy->eee_speeds_supported = IXGBE_LINK_SPEED_10_FULL |
+ IXGBE_LINK_SPEED_100_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ phy->eee_speeds_advertised = phy->eee_speeds_supported;
+
+ /* Additional ops overrides for e610 to go here */
+ eeprom->ops.init_params = ixgbe_init_eeprom_params_E610;
+ eeprom->ops.read = ixgbe_read_ee_aci_E610;
+ eeprom->ops.read_buffer = ixgbe_read_ee_aci_buffer_E610;
+ eeprom->ops.write = ixgbe_write_ee_aci_E610;
+ eeprom->ops.write_buffer = ixgbe_write_ee_aci_buffer_E610;
+ eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_E610;
+ eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_E610;
+ eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_E610;
+ eeprom->ops.read_pba_string = ixgbe_read_pba_string_E610;
+
+ /* Initialize bus function number */
+ hw->mac.ops.set_lan_id(hw);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_reset_hw_E610 - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, and perform a reset.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_reset_hw_E610(struct ixgbe_hw *hw)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ u32 ctrl, i;
+ s32 status;
+
+ DEBUGFUNC("ixgbe_reset_hw_E610");
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ status = hw->mac.ops.stop_adapter(hw);
+ if (status != IXGBE_SUCCESS)
+ goto reset_hw_out;
+
+ /* flush pending Tx transactions */
+ ixgbe_clear_tx_pending(hw);
+
+ status = hw->phy.ops.init(hw);
+ if (status != IXGBE_SUCCESS)
+ DEBUGOUT1("Failed to initialize PHY ops, STATUS = %d\n",
+ status);
+mac_reset_top:
+ status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask);
+ if (status != IXGBE_SUCCESS) {
+ ERROR_REPORT2(IXGBE_ERROR_CAUTION,
+ "semaphore failed with %d", status);
+ return IXGBE_ERR_SWFW_SYNC;
+ }
+ ctrl = IXGBE_CTRL_RST;
+ ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+ IXGBE_WRITE_FLUSH(hw);
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ usec_delay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST_MASK))
+ break;
+ }
+
+ if (ctrl & IXGBE_CTRL_RST_MASK) {
+ status = IXGBE_ERR_RESET_FAILED;
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "Reset polling failed to complete.\n");
+ }
+ msec_delay(100);
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ goto mac_reset_top;
+ }
+
+ /* Set the Rx packet buffer size. */
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+reset_hw_out:
+ return status;
+}
+
+/**
+ * ixgbe_start_hw_E610 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Gets firmware version and if API version matches it
+ * starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+s32 ixgbe_start_hw_E610(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_SUCCESS;
+
+ ret_val = hw->mac.ops.get_fw_version(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val != IXGBE_SUCCESS)
+ goto out;
+
+ ixgbe_start_hw_gen2(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_media_type_E610 - Gets media type
+ * @hw: pointer to the HW struct
+ *
+ * In order to get the media type, the function gets PHY
+ * capabilities and later on use them to identify the PHY type
+ * checking phy_type_high and phy_type_low.
+ *
+ * Return: the type of media in form of ixgbe_media_type enum
+ * or ixgbe_media_type_unknown in case of an error.
+ */
+enum ixgbe_media_type ixgbe_get_media_type_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data pcaps;
+ u64 phy_mask = 0;
+ s32 rc;
+ u8 i;
+
+ rc = ixgbe_update_link_info(hw);
+ if (rc) {
+ return ixgbe_media_type_unknown;
+ }
+
+ /* If there is no link but PHY (dongle) is available SW should use
+ * Get PHY Caps admin command instead of Get Link Status, find most
+ * significant bit that is set in PHY types reported by the command
+ * and use it to discover media type.
+ */
+ if (!(hw->link.link_info.link_info & IXGBE_ACI_LINK_UP) &&
+ (hw->link.link_info.link_info & IXGBE_ACI_MEDIA_AVAILABLE)) {
+ /* Get PHY Capabilities */
+ rc = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_TOPO_CAP_MEDIA,
+ &pcaps);
+ if (rc) {
+ return ixgbe_media_type_unknown;
+ }
+
+ /* Check if there is some bit set in phy_type_high */
+ for (i = 64; i > 0; i--) {
+ phy_mask = (u64)((u64)1 << (i - 1));
+ if ((pcaps.phy_type_high & phy_mask) != 0) {
+ /* If any bit is set treat it as PHY type */
+ hw->link.link_info.phy_type_high = phy_mask;
+ hw->link.link_info.phy_type_low = 0;
+ break;
+ }
+ phy_mask = 0;
+ }
+
+ /* If nothing found in phy_type_high search in phy_type_low */
+ if (phy_mask == 0) {
+ for (i = 64; i > 0; i--) {
+ phy_mask = (u64)((u64)1 << (i - 1));
+ if ((pcaps.phy_type_low & phy_mask) != 0) {
+ /* If any bit is set treat it as PHY type */
+ hw->link.link_info.phy_type_high = 0;
+ hw->link.link_info.phy_type_low = phy_mask;
+ break;
+ }
+ }
+ }
+
+ }
+
+ /* Based on link status or search above try to discover media type */
+ hw->phy.media_type = ixgbe_get_media_type_from_phy_type(hw);
+
+ return hw->phy.media_type;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_E610 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ *
+ * Return: the exit code of the operation.
+ **/
+u64 ixgbe_get_supported_physical_layer_E610(struct ixgbe_hw *hw)
+{
+ u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ struct ixgbe_aci_cmd_get_phy_caps_data pcaps;
+ u64 phy_type;
+ s32 rc;
+
+ rc = ixgbe_aci_get_phy_caps(hw, false, IXGBE_ACI_REPORT_TOPO_CAP_MEDIA,
+ &pcaps);
+ if (rc)
+ return IXGBE_PHYSICAL_LAYER_UNKNOWN;
+
+ phy_type = IXGBE_LE64_TO_CPU(pcaps.phy_type_low);
+ if(phy_type & IXGBE_PHY_TYPE_LOW_10GBASE_T)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_1000BASE_T)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_100BASE_TX)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_10GBASE_LR)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_10GBASE_SR)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_1000BASE_KX)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_10GBASE_KR_CR1)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_1000BASE_SX)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_SX;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_2500BASE_KX)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_2500BASE_KX;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_2500BASE_T)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_2500BASE_T;
+ if(phy_type & IXGBE_PHY_TYPE_LOW_5GBASE_T)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_5000BASE_T;
+
+ phy_type = IXGBE_LE64_TO_CPU(pcaps.phy_type_high);
+ if(phy_type & IXGBE_PHY_TYPE_HIGH_10BASE_T)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10BASE_T;
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_setup_link_E610 - Set up link
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg_wait: true when waiting for completion is needed
+ *
+ * Set up the link with the specified speed.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_setup_link_E610(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+ bool autoneg_wait)
+{
+ /* Simply request FW to perform proper PHY setup */
+ return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait);
+}
+
+/**
+ * ixgbe_check_link_E610 - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Determine if the link is up and the current link speed
+ * using ACI command (0x0607).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_check_link_E610(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ s32 rc;
+ u32 i;
+
+ if (!speed || !link_up)
+ return IXGBE_ERR_PARAM;
+
+ /* Set get_link_info flag to ensure that fresh
+ * link information will be obtained from FW
+ * by sending Get Link Status admin command. */
+ hw->link.get_link_info = true;
+
+ /* Update link information in adapter context. */
+ rc = ixgbe_get_link_status(hw, link_up);
+ if (rc)
+ return rc;
+
+ /* Wait for link up if it was requested. */
+ if (link_up_wait_to_complete && *link_up == false) {
+ for (i = 0; i < hw->mac.max_link_up_time; i++) {
+ msec_delay(100);
+ hw->link.get_link_info = true;
+ rc = ixgbe_get_link_status(hw, link_up);
+ if (rc)
+ return rc;
+ if (*link_up)
+ break;
+ }
+ }
+
+ /* Use link information in adapter context updated by the call
+ * to ixgbe_get_link_status() to determine current link speed.
+ * Link speed information is valid only when link up was
+ * reported by FW. */
+ if (*link_up) {
+ switch (hw->link.link_info.link_speed) {
+ case IXGBE_ACI_LINK_SPEED_10MB:
+ *speed = IXGBE_LINK_SPEED_10_FULL;
+ break;
+ case IXGBE_ACI_LINK_SPEED_100MB:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ break;
+ case IXGBE_ACI_LINK_SPEED_1000MB:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ case IXGBE_ACI_LINK_SPEED_2500MB:
+ *speed = IXGBE_LINK_SPEED_2_5GB_FULL;
+ break;
+ case IXGBE_ACI_LINK_SPEED_5GB:
+ *speed = IXGBE_LINK_SPEED_5GB_FULL;
+ break;
+ case IXGBE_ACI_LINK_SPEED_10GB:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ break;
+ default:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ break;
+ }
+ } else {
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_get_link_capabilities_E610 - Determine link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: true when autoneg or autotry is enabled
+ *
+ * Determine speed and AN parameters of a link.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_link_capabilities_E610(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ if (!speed || !autoneg)
+ return IXGBE_ERR_PARAM;
+
+ *autoneg = true;
+ *speed = hw->phy.speeds_supported;
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_cfg_phy_fc - Configure PHY Flow Control (FC) data based on FC mode
+ * @hw: pointer to hardware structure
+ * @cfg: PHY configuration data to set FC mode
+ * @req_mode: FC mode to configure
+ *
+ * Configures PHY Flow Control according to the provided configuration.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_cfg_phy_fc(struct ixgbe_hw *hw,
+ struct ixgbe_aci_cmd_set_phy_cfg_data *cfg,
+ enum ixgbe_fc_mode req_mode)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data* pcaps = NULL;
+ s32 status = IXGBE_SUCCESS;
+ u8 pause_mask = 0x0;
+
+ if (!cfg)
+ return IXGBE_ERR_PARAM;
+
+ switch (req_mode) {
+ case ixgbe_fc_auto:
+ {
+ pcaps = (struct ixgbe_aci_cmd_get_phy_caps_data *)
+ ixgbe_malloc(hw, sizeof(*pcaps));
+ if (!pcaps) {
+ status = IXGBE_ERR_OUT_OF_MEM;
+ goto out;
+ }
+
+ /* Query the value of FC that both the NIC and the attached
+ * media can do. */
+ status = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_TOPO_CAP_MEDIA, pcaps);
+ if (status)
+ goto out;
+
+ pause_mask |= pcaps->caps & IXGBE_ACI_PHY_EN_TX_LINK_PAUSE;
+ pause_mask |= pcaps->caps & IXGBE_ACI_PHY_EN_RX_LINK_PAUSE;
+
+ break;
+ }
+ case ixgbe_fc_full:
+ pause_mask |= IXGBE_ACI_PHY_EN_TX_LINK_PAUSE;
+ pause_mask |= IXGBE_ACI_PHY_EN_RX_LINK_PAUSE;
+ break;
+ case ixgbe_fc_rx_pause:
+ pause_mask |= IXGBE_ACI_PHY_EN_RX_LINK_PAUSE;
+ break;
+ case ixgbe_fc_tx_pause:
+ pause_mask |= IXGBE_ACI_PHY_EN_TX_LINK_PAUSE;
+ break;
+ default:
+ break;
+ }
+
+ /* clear the old pause settings */
+ cfg->caps &= ~(IXGBE_ACI_PHY_EN_TX_LINK_PAUSE |
+ IXGBE_ACI_PHY_EN_RX_LINK_PAUSE);
+
+ /* set the new capabilities */
+ cfg->caps |= pause_mask;
+
+out:
+ if (pcaps)
+ ixgbe_free(hw, pcaps);
+ return status;
+}
+
+/**
+ * ixgbe_setup_fc_E610 - Set up flow control
+ * @hw: pointer to hardware structure
+ *
+ * Set up flow control. This has to be done during init time.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_setup_fc_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data pcaps = { 0 };
+ struct ixgbe_aci_cmd_set_phy_cfg_data cfg = { 0 };
+ s32 status;
+
+ /* Get the current PHY config */
+ status = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_ACTIVE_CFG, &pcaps);
+ if (status)
+ return status;
+
+ ixgbe_copy_phy_caps_to_cfg(&pcaps, &cfg);
+
+ /* Configure the set PHY data */
+ status = ixgbe_cfg_phy_fc(hw, &cfg, hw->fc.requested_mode);
+ if (status)
+ return status;
+
+ /* If the capabilities have changed, then set the new config */
+ if (cfg.caps != pcaps.caps) {
+ cfg.caps |= IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT;
+
+ status = ixgbe_aci_set_phy_cfg(hw, &cfg);
+ if (status)
+ return status;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_fc_autoneg_E610 - Configure flow control
+ * @hw: pointer to hardware structure
+ *
+ * Configure Flow Control.
+ */
+void ixgbe_fc_autoneg_E610(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ /* Get current link status.
+ * Current FC mode will be stored in the hw context. */
+ status = ixgbe_aci_get_link_info(hw, false, NULL);
+ if (status) {
+ goto out;
+ }
+
+ /* Check if the link is up */
+ if (!(hw->link.link_info.link_info & IXGBE_ACI_LINK_UP)) {
+ status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ goto out;
+ }
+
+ /* Check if auto-negotiation has completed */
+ if (!(hw->link.link_info.an_info & IXGBE_ACI_AN_COMPLETED)) {
+ status = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ goto out;
+ }
+
+out:
+ if (status == IXGBE_SUCCESS) {
+ hw->fc.fc_was_autonegged = true;
+ } else {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ }
+}
+
+/**
+ * ixgbe_set_fw_drv_ver_E610 - Send driver version to FW
+ * @hw: pointer to the HW structure
+ * @maj: driver version major number
+ * @minor: driver version minor number
+ * @build: driver version build number
+ * @sub: driver version sub build number
+ * @len: length of driver_ver string
+ * @driver_ver: driver string
+ *
+ * Send driver version number to Firmware using ACI command (0x0002).
+ *
+ * Return: the exit code of the operation.
+ * IXGBE_SUCCESS - OK
+ * IXGBE_ERR_PARAM - incorrect parameters were given
+ * IXGBE_ERR_ACI_ERROR - encountered an error during sending the command
+ * IXGBE_ERR_ACI_TIMEOUT - a timeout occurred
+ * IXGBE_ERR_OUT_OF_MEM - ran out of memory
+ */
+s32 ixgbe_set_fw_drv_ver_E610(struct ixgbe_hw *hw, u8 maj, u8 minor, u8 build,
+ u8 sub, u16 len, const char *driver_ver)
+{
+ size_t limited_len = min(len, (u16)IXGBE_DRV_VER_STR_LEN_E610);
+ struct ixgbe_driver_ver dv;
+
+ DEBUGFUNC("ixgbe_set_fw_drv_ver_E610");
+
+ if (!len || !driver_ver)
+ return IXGBE_ERR_PARAM;
+
+ dv.major_ver = maj;
+ dv.minor_ver = minor;
+ dv.build_ver = build;
+ dv.subbuild_ver = sub;
+
+ memset(dv.driver_string, 0, IXGBE_DRV_VER_STR_LEN_E610);
+ memcpy(dv.driver_string, driver_ver, limited_len);
+
+ return ixgbe_aci_send_driver_ver(hw, &dv);
+}
+
+/**
+ * ixgbe_disable_rx_E610 - Disable RX unit
+ * @hw: pointer to hardware structure
+ *
+ * Disable RX DMA unit on E610 with use of ACI command (0x000C).
+ *
+ * Return: the exit code of the operation.
+ */
+void ixgbe_disable_rx_E610(struct ixgbe_hw *hw)
+{
+ u32 rxctrl;
+
+ DEBUGFUNC("ixgbe_disable_rx_E610");
+
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ if (rxctrl & IXGBE_RXCTRL_RXEN) {
+ u32 pfdtxgswc;
+ s32 status;
+
+ pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC);
+ if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) {
+ pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN;
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc);
+ hw->mac.set_lben = true;
+ } else {
+ hw->mac.set_lben = false;
+ }
+
+ status = ixgbe_aci_disable_rxen(hw);
+
+ /* If we fail - disable RX using register write */
+ if (status) {
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ if (rxctrl & IXGBE_RXCTRL_RXEN) {
+ rxctrl &= ~IXGBE_RXCTRL_RXEN;
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
+ }
+ }
+ }
+}
+
+/**
+ * ixgbe_setup_eee_E610 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @enable_eee: boolean flag to enable EEE
+ *
+ * Enables/disable EEE based on enable_eee flag.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_setup_eee_E610(struct ixgbe_hw *hw, bool enable_eee)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data phy_caps = { 0 };
+ struct ixgbe_aci_cmd_set_phy_cfg_data phy_cfg = { 0 };
+ u16 eee_cap = 0;
+ s32 status;
+
+ status = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_ACTIVE_CFG, &phy_caps);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ ixgbe_copy_phy_caps_to_cfg(&phy_caps, &phy_cfg);
+
+ phy_cfg.caps |= IXGBE_ACI_PHY_ENA_LINK;
+ phy_cfg.caps |= IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT;
+
+ if (enable_eee) {
+ if (phy_caps.phy_type_low & IXGBE_PHY_TYPE_LOW_100BASE_TX)
+ eee_cap |= IXGBE_ACI_PHY_EEE_EN_100BASE_TX;
+ if (phy_caps.phy_type_low & IXGBE_PHY_TYPE_LOW_1000BASE_T)
+ eee_cap |= IXGBE_ACI_PHY_EEE_EN_1000BASE_T;
+ if (phy_caps.phy_type_low & IXGBE_PHY_TYPE_LOW_1000BASE_KX)
+ eee_cap |= IXGBE_ACI_PHY_EEE_EN_1000BASE_KX;
+ if (phy_caps.phy_type_low & IXGBE_PHY_TYPE_LOW_10GBASE_T)
+ eee_cap |= IXGBE_ACI_PHY_EEE_EN_10GBASE_T;
+ if (phy_caps.phy_type_low & IXGBE_PHY_TYPE_LOW_10GBASE_KR_CR1)
+ eee_cap |= IXGBE_ACI_PHY_EEE_EN_10GBASE_KR;
+ if (phy_caps.phy_type_high & IXGBE_PHY_TYPE_HIGH_10BASE_T)
+ eee_cap |= IXGBE_ACI_PHY_EEE_EN_10BASE_T;
+ }
+
+ /* Set EEE capability for particular PHY types */
+ phy_cfg.eee_cap = IXGBE_CPU_TO_LE16(eee_cap);
+
+ status = ixgbe_aci_set_phy_cfg(hw, &phy_cfg);
+
+ return status;
+}
+
+/**
+ * ixgbe_fw_recovery_mode_E610 - Check FW NVM recovery mode
+ * @hw: pointer to hardware structure
+ *
+ * Checks FW NVM recovery mode by
+ * reading the value of the dedicated register.
+ *
+ * Return: true if FW is in recovery mode, otherwise false.
+ */
+bool ixgbe_fw_recovery_mode_E610(struct ixgbe_hw *hw)
+{
+ u32 fwsm = IXGBE_READ_REG(hw, GL_MNG_FWSM);
+
+ return !!(fwsm & GL_MNG_FWSM_FW_MODES_RECOVERY_M);
+}
+
+/**
+ * ixgbe_fw_rollback_mode_E610 - Check FW NVM Rollback
+ * @hw: pointer to hardware structure
+ *
+ * Checks FW NVM Rollback mode by reading the
+ * value of the dedicated register.
+ *
+ * Return: true if FW is in Rollback mode, otherwise false.
+ */
+bool ixgbe_fw_rollback_mode_E610(struct ixgbe_hw *hw)
+{
+ u32 fwsm = IXGBE_READ_REG(hw, GL_MNG_FWSM);
+
+ return !!(fwsm & GL_MNG_FWSM_FW_MODES_ROLLBACK_M);
+}
+
+/**
+ * ixgbe_get_fw_tsam_mode_E610 - Check FW NVM Thermal Sensor Autonomous Mode
+ * @hw: pointer to hardware structure
+ *
+ * Checks Thermal Sensor Autonomous Mode by reading the
+ * value of the dedicated register.
+ *
+ * Return: true if FW is in TSAM, otherwise false.
+ */
+bool ixgbe_get_fw_tsam_mode_E610(struct ixgbe_hw *hw)
+{
+ u32 fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM_X550EM_a);
+
+ return !!(fwsm & IXGBE_FWSM_TS_ENABLED);
+}
+
+/**
+ * ixgbe_init_phy_ops_E610 - PHY specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during init_shared_code because the PHY type was not known.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_init_phy_ops_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ phy->ops.identify_sfp = ixgbe_identify_module_E610;
+ phy->ops.read_reg = NULL; /* PHY reg access is not required */
+ phy->ops.write_reg = NULL;
+ phy->ops.read_reg_mdi = NULL;
+ phy->ops.write_reg_mdi = NULL;
+ phy->ops.setup_link = ixgbe_setup_phy_link_E610;
+ phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_E610;
+ phy->ops.read_i2c_byte = NULL; /* disabled for E610 */
+ phy->ops.write_i2c_byte = NULL; /* disabled for E610 */
+ phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_E610;
+ phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_E610;
+ phy->ops.write_i2c_eeprom = ixgbe_write_i2c_eeprom_E610;
+ phy->ops.i2c_bus_clear = NULL; /* do not use generic implementation */
+ phy->ops.check_overtemp = ixgbe_check_overtemp_E610;
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper)
+ phy->ops.set_phy_power = ixgbe_set_phy_power_E610;
+ else
+ phy->ops.set_phy_power = NULL;
+ phy->ops.enter_lplu = ixgbe_enter_lplu_E610;
+ phy->ops.handle_lasi = NULL; /* no implementation for E610 */
+ phy->ops.read_i2c_byte_unlocked = NULL; /* disabled for E610 */
+ phy->ops.write_i2c_byte_unlocked = NULL; /* disabled for E610 */
+
+ /* TODO: Set functions pointers based on device ID */
+
+ /* Identify the PHY */
+ ret_val = phy->ops.identify(hw);
+ if (ret_val != IXGBE_SUCCESS)
+ return ret_val;
+
+ /* TODO: Set functions pointers based on PHY type */
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_identify_phy_E610 - Identify PHY
+ * @hw: pointer to hardware structure
+ *
+ * Determine PHY type, supported speeds and PHY ID.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_identify_phy_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data pcaps;
+ s32 rc;
+
+ /* Set PHY type */
+ hw->phy.type = ixgbe_phy_fw;
+
+ rc = ixgbe_aci_get_phy_caps(hw, false, IXGBE_ACI_REPORT_TOPO_CAP_MEDIA,
+ &pcaps);
+ if (rc)
+ return rc;
+
+ if (!(pcaps.module_compliance_enforcement &
+ IXGBE_ACI_MOD_ENFORCE_STRICT_MODE)) {
+ /* Handle lenient mode */
+ rc = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_TOPO_CAP_NO_MEDIA,
+ &pcaps);
+ if (rc)
+ return rc;
+ }
+
+ /* Determine supported speeds */
+ hw->phy.speeds_supported = IXGBE_LINK_SPEED_UNKNOWN;
+
+ if (pcaps.phy_type_high & IXGBE_PHY_TYPE_HIGH_10BASE_T ||
+ pcaps.phy_type_high & IXGBE_PHY_TYPE_HIGH_10M_SGMII)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10_FULL;
+ if (pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_100BASE_TX ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_100M_SGMII ||
+ pcaps.phy_type_high & IXGBE_PHY_TYPE_HIGH_100M_USXGMII)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL;
+ if (pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_1000BASE_T ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_1000BASE_SX ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_1000BASE_LX ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_1000BASE_KX ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_1G_SGMII ||
+ pcaps.phy_type_high & IXGBE_PHY_TYPE_HIGH_1G_USXGMII)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL;
+ if (pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_10GBASE_T ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_10G_SFI_DA ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_10GBASE_SR ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_10GBASE_LR ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_10GBASE_KR_CR1 ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_10G_SFI_AOC_ACC ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_10G_SFI_C2C ||
+ pcaps.phy_type_high & IXGBE_PHY_TYPE_HIGH_10G_USXGMII)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ /* 2.5 and 5 Gbps link speeds must be excluded from the
+ * auto-negotiation set used during driver initialization due to
+ * compatibility issues with certain switches. Those issues do not
+ * exist in case of E610 2.5G SKU device (0x57b1).
+ */
+ if (!hw->phy.autoneg_advertised &&
+ hw->device_id != IXGBE_DEV_ID_E610_2_5G_T)
+ hw->phy.autoneg_advertised = hw->phy.speeds_supported;
+
+ if (pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_2500BASE_T ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_2500BASE_X ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_2500BASE_KX ||
+ pcaps.phy_type_high & IXGBE_PHY_TYPE_HIGH_2500M_SGMII ||
+ pcaps.phy_type_high & IXGBE_PHY_TYPE_HIGH_2500M_USXGMII)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_2_5GB_FULL;
+
+ if (!hw->phy.autoneg_advertised &&
+ hw->device_id == IXGBE_DEV_ID_E610_2_5G_T)
+ hw->phy.autoneg_advertised = hw->phy.speeds_supported;
+
+ if (pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_5GBASE_T ||
+ pcaps.phy_type_low & IXGBE_PHY_TYPE_LOW_5GBASE_KR ||
+ pcaps.phy_type_high & IXGBE_PHY_TYPE_HIGH_5G_USXGMII)
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL;
+
+ /* Set PHY ID */
+ memcpy(&hw->phy.id, pcaps.phy_id_oui, sizeof(u32));
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_identify_module_E610 - Identify SFP module type
+ * @hw: pointer to hardware structure
+ *
+ * Identify the SFP module type.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_identify_module_E610(struct ixgbe_hw *hw)
+{
+ bool media_available;
+ u8 module_type;
+ s32 rc;
+
+ rc = ixgbe_update_link_info(hw);
+ if (rc)
+ goto err;
+
+ media_available =
+ (hw->link.link_info.link_info &
+ IXGBE_ACI_MEDIA_AVAILABLE) ? true : false;
+
+ if (media_available) {
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+
+ /* Get module type from hw context updated by ixgbe_update_link_info() */
+ module_type = hw->link.link_info.module_type[IXGBE_ACI_MOD_TYPE_IDENT];
+
+ if ((module_type & IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_PASSIVE) ||
+ (module_type & IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_ACTIVE)) {
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+ } else if (module_type & IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_SR) {
+ hw->phy.sfp_type = ixgbe_sfp_type_sr;
+ } else if ((module_type & IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_LR) ||
+ (module_type & IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_LRM)) {
+ hw->phy.sfp_type = ixgbe_sfp_type_lr;
+ }
+ rc = IXGBE_SUCCESS;
+ } else {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ rc = IXGBE_ERR_SFP_NOT_PRESENT;
+ }
+err:
+ return rc;
+}
+
+/**
+ * ixgbe_setup_phy_link_E610 - Sets up firmware-controlled PHYs
+ * @hw: pointer to hardware structure
+ *
+ * Set the parameters for the firmware-controlled PHYs.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_setup_phy_link_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data pcaps;
+ struct ixgbe_aci_cmd_set_phy_cfg_data pcfg;
+ u8 rmode = IXGBE_ACI_REPORT_TOPO_CAP_MEDIA;
+ u64 sup_phy_type_low, sup_phy_type_high;
+ s32 rc;
+
+ rc = ixgbe_aci_get_link_info(hw, false, NULL);
+ if (rc) {
+ goto err;
+ }
+
+ /* If media is not available get default config */
+ if (!(hw->link.link_info.link_info & IXGBE_ACI_MEDIA_AVAILABLE))
+ rmode = IXGBE_ACI_REPORT_DFLT_CFG;
+
+ rc = ixgbe_aci_get_phy_caps(hw, false, rmode, &pcaps);
+ if (rc) {
+ goto err;
+ }
+
+ sup_phy_type_low = pcaps.phy_type_low;
+ sup_phy_type_high = pcaps.phy_type_high;
+
+ /* Get Active configuration to avoid unintended changes */
+ rc = ixgbe_aci_get_phy_caps(hw, false, IXGBE_ACI_REPORT_ACTIVE_CFG,
+ &pcaps);
+ if (rc) {
+ goto err;
+ }
+ ixgbe_copy_phy_caps_to_cfg(&pcaps, &pcfg);
+
+ /* Set default PHY types for a given speed */
+ pcfg.phy_type_low = 0;
+ pcfg.phy_type_high = 0;
+
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10_FULL) {
+ pcfg.phy_type_high |= IXGBE_PHY_TYPE_HIGH_10BASE_T;
+ pcfg.phy_type_high |= IXGBE_PHY_TYPE_HIGH_10M_SGMII;
+ }
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) {
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_100BASE_TX;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_100M_SGMII;
+ pcfg.phy_type_high |= IXGBE_PHY_TYPE_HIGH_100M_USXGMII;
+ }
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) {
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_1000BASE_T;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_1000BASE_SX;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_1000BASE_LX;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_1000BASE_KX;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_1G_SGMII;
+ pcfg.phy_type_high |= IXGBE_PHY_TYPE_HIGH_1G_USXGMII;
+ }
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) {
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_2500BASE_T;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_2500BASE_X;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_2500BASE_KX;
+ pcfg.phy_type_high |= IXGBE_PHY_TYPE_HIGH_2500M_SGMII;
+ pcfg.phy_type_high |= IXGBE_PHY_TYPE_HIGH_2500M_USXGMII;
+ }
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_5GB_FULL) {
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_5GBASE_T;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_5GBASE_KR;
+ pcfg.phy_type_high |= IXGBE_PHY_TYPE_HIGH_5G_USXGMII;
+ }
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) {
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_10GBASE_T;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_10G_SFI_DA;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_10GBASE_SR;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_10GBASE_LR;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_10GBASE_KR_CR1;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_10G_SFI_AOC_ACC;
+ pcfg.phy_type_low |= IXGBE_PHY_TYPE_LOW_10G_SFI_C2C;
+ pcfg.phy_type_high |= IXGBE_PHY_TYPE_HIGH_10G_USXGMII;
+ }
+
+ /* Mask the set values to avoid requesting unsupported link types */
+ pcfg.phy_type_low &= sup_phy_type_low;
+ pcfg.phy_type_high &= sup_phy_type_high;
+
+ if (pcfg.phy_type_high != pcaps.phy_type_high ||
+ pcfg.phy_type_low != pcaps.phy_type_low ||
+ pcfg.caps != pcaps.caps) {
+ pcfg.caps |= IXGBE_ACI_PHY_ENA_LINK;
+ pcfg.caps |= IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT;
+
+ rc = ixgbe_aci_set_phy_cfg(hw, &pcfg);
+ }
+
+err:
+ return rc;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_E610 - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ *
+ * Determines PHY FW version based on response to Get PHY Capabilities
+ * admin command (0x0600).
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_get_phy_firmware_version_E610(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data pcaps;
+ s32 status;
+
+ if (!firmware_version)
+ return IXGBE_ERR_PARAM;
+
+ status = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_ACTIVE_CFG,
+ &pcaps);
+ if (status)
+ return status;
+
+ /* TODO: determine which bytes of the 8-byte phy_fw_ver
+ * field should be written to the 2-byte firmware_version
+ * output argument. */
+ memcpy(firmware_version, pcaps.phy_fw_ver, sizeof(u16));
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_i2c_sff8472_E610 - Reads 8 bit word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset at address 0xA2
+ * @sff8472_data: value read
+ *
+ * Performs byte read operation from SFP module's SFF-8472 data over I2C.
+ *
+ * Return: the exit code of the operation.
+ **/
+s32 ixgbe_read_i2c_sff8472_E610(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data)
+{
+ return ixgbe_aci_sff_eeprom(hw, 0, IXGBE_I2C_EEPROM_DEV_ADDR2,
+ byte_offset, 0,
+ IXGBE_ACI_SFF_NO_PAGE_BANK_UPDATE,
+ sff8472_data, 1, false);
+}
+
+/**
+ * ixgbe_read_i2c_eeprom_E610 - Reads 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation from SFP module's EEPROM over I2C interface.
+ *
+ * Return: the exit code of the operation.
+ **/
+s32 ixgbe_read_i2c_eeprom_E610(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ return ixgbe_aci_sff_eeprom(hw, 0, IXGBE_I2C_EEPROM_DEV_ADDR,
+ byte_offset, 0,
+ IXGBE_ACI_SFF_NO_PAGE_BANK_UPDATE,
+ eeprom_data, 1, false);
+}
+
+/**
+ * ixgbe_write_i2c_eeprom_E610 - Writes 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to write
+ * @eeprom_data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface.
+ *
+ * Return: the exit code of the operation.
+ **/
+s32 ixgbe_write_i2c_eeprom_E610(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data)
+{
+ return ixgbe_aci_sff_eeprom(hw, 0, IXGBE_I2C_EEPROM_DEV_ADDR,
+ byte_offset, 0,
+ IXGBE_ACI_SFF_NO_PAGE_BANK_UPDATE,
+ &eeprom_data, 1, true);
+}
+
+/**
+ * ixgbe_check_overtemp_E610 - Check firmware-controlled PHYs for overtemp
+ * @hw: pointer to hardware structure
+ *
+ * Get the link status and check if the PHY temperature alarm detected.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_check_overtemp_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_link_status_data link_data = { 0 };
+ struct ixgbe_aci_cmd_get_link_status *resp;
+ struct ixgbe_aci_desc desc;
+ s32 status = IXGBE_SUCCESS;
+
+ if (!hw)
+ return IXGBE_ERR_PARAM;
+
+ ixgbe_fill_dflt_direct_cmd_desc(&desc, ixgbe_aci_opc_get_link_status);
+ resp = &desc.params.get_link_status;
+ resp->cmd_flags = IXGBE_CPU_TO_LE16(IXGBE_ACI_LSE_NOP);
+
+ status = ixgbe_aci_send_cmd(hw, &desc, &link_data, sizeof(link_data));
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ if (link_data.ext_info & IXGBE_ACI_LINK_PHY_TEMP_ALARM) {
+ ERROR_REPORT1(IXGBE_ERROR_CAUTION,
+ "PHY Temperature Alarm detected");
+ status = IXGBE_ERR_OVERTEMP;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_set_phy_power_E610 - Control power for copper PHY
+ * @hw: pointer to hardware structure
+ * @on: true for on, false for off
+ *
+ * Set the power on/off of the PHY
+ * by getting its capabilities and setting the appropriate
+ * configuration parameters.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_set_phy_power_E610(struct ixgbe_hw *hw, bool on)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data phy_caps = { 0 };
+ struct ixgbe_aci_cmd_set_phy_cfg_data phy_cfg = { 0 };
+ s32 status;
+
+ status = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_ACTIVE_CFG, &phy_caps);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ ixgbe_copy_phy_caps_to_cfg(&phy_caps, &phy_cfg);
+
+ if (on) {
+ phy_cfg.caps &= ~IXGBE_ACI_PHY_ENA_LOW_POWER;
+ } else {
+ phy_cfg.caps |= IXGBE_ACI_PHY_ENA_LOW_POWER;
+ }
+
+ /* PHY is already in requested power mode */
+ if (phy_caps.caps == phy_cfg.caps)
+ return IXGBE_SUCCESS;
+
+ phy_cfg.caps |= IXGBE_ACI_PHY_ENA_LINK;
+ phy_cfg.caps |= IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT;
+
+ status = ixgbe_aci_set_phy_cfg(hw, &phy_cfg);
+
+ return status;
+}
+
+/**
+ * ixgbe_enter_lplu_E610 - Transition to low power states
+ * @hw: pointer to hardware structure
+ *
+ * Configures Low Power Link Up on transition to low power states
+ * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the
+ * X557 PHY immediately prior to entering LPLU.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_enter_lplu_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_aci_cmd_get_phy_caps_data phy_caps = { 0 };
+ struct ixgbe_aci_cmd_set_phy_cfg_data phy_cfg = { 0 };
+ s32 status;
+
+ status = ixgbe_aci_get_phy_caps(hw, false,
+ IXGBE_ACI_REPORT_ACTIVE_CFG, &phy_caps);
+ if (status != IXGBE_SUCCESS)
+ return status;
+
+ ixgbe_copy_phy_caps_to_cfg(&phy_caps, &phy_cfg);
+
+ phy_cfg.low_power_ctrl_an |= IXGBE_ACI_PHY_EN_D3COLD_LOW_POWER_AUTONEG;
+
+ status = ixgbe_aci_set_phy_cfg(hw, &phy_cfg);
+
+ return status;
+}
+
+/**
+ * ixgbe_init_eeprom_params_E610 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_init_eeprom_params_E610(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 gens_stat;
+ u8 sr_size;
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->type = ixgbe_flash;
+
+ gens_stat = IXGBE_READ_REG(hw, GLNVM_GENS);
+ sr_size = (gens_stat & GLNVM_GENS_SR_SIZE_M) >>
+ GLNVM_GENS_SR_SIZE_S;
+
+ /* Switching to words (sr_size contains power of 2) */
+ eeprom->word_size = BIT(sr_size) * IXGBE_SR_WORDS_IN_1KB;
+
+ DEBUGOUT2("Eeprom params: type = %d, size = %d\n",
+ eeprom->type, eeprom->word_size);
+ }
+
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_ee_aci_E610 - Read EEPROM word using the admin command.
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the ACI.
+ * If the EEPROM params are not initialized, the function
+ * initialize them before proceeding with reading.
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_read_ee_aci_E610(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ s32 status;
+
+ if (hw->eeprom.type == ixgbe_eeprom_uninitialized) {
+ status = ixgbe_init_eeprom_params(hw);
+ if (status)
+ return status;
+ }
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+ if (status)
+ return status;
+
+ status = ixgbe_read_sr_word_aci(hw, offset, data);
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_read_ee_aci_buffer_E610- Read EEPROM word(s) using admin commands.
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the ACI.
+ * If the EEPROM params are not initialized, the function
+ * initialize them before proceeding with reading.
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_read_ee_aci_buffer_E610(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+
+ if (hw->eeprom.type == ixgbe_eeprom_uninitialized) {
+ status = ixgbe_init_eeprom_params(hw);
+ if (status)
+ return status;
+ }
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+ if (status)
+ return status;
+
+ status = ixgbe_read_sr_buf_aci(hw, offset, &words, data);
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_write_ee_aci_E610 - Write EEPROM word using the admin command.
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the ACI.
+ * If the EEPROM params are not initialized, the function
+ * initialize them before proceeding with writing.
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_write_ee_aci_E610(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status;
+
+ if (hw->eeprom.type == ixgbe_eeprom_uninitialized) {
+ status = ixgbe_init_eeprom_params(hw);
+ if (status)
+ return status;
+ }
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_WRITE);
+ if (status)
+ return status;
+
+ status = ixgbe_write_sr_word_aci(hw, (u32)offset, &data);
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_write_ee_aci_buffer_E610 - Write EEPROM word(s) using admin commands.
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the ACI.
+ * If the EEPROM params are not initialized, the function
+ * initialize them before proceeding with writing.
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_write_ee_aci_buffer_E610(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+
+ if (hw->eeprom.type == ixgbe_eeprom_uninitialized) {
+ status = ixgbe_init_eeprom_params(hw);
+ if (status)
+ return status;
+ }
+
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_WRITE);
+ if (status)
+ return status;
+
+ status = ixgbe_write_sr_buf_aci(hw, (u32)offset, words, data);
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_E610 - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ *
+ * Calculate SW Checksum that covers the whole 64kB shadow RAM
+ * except the VPD and PCIe ALT Auto-load modules. The structure and size of VPD
+ * is customer specific and unknown. Therefore, this function skips all maximum
+ * possible size of VPD (1kB).
+ * If the EEPROM params are not initialized, the function
+ * initializes them before proceeding.
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the negative error code on error, or the 16-bit checksum
+ */
+s32 ixgbe_calc_eeprom_checksum_E610(struct ixgbe_hw *hw)
+{
+ bool nvm_acquired = false;
+ u16 pcie_alt_module = 0;
+ u16 checksum_local = 0;
+ u16 checksum = 0;
+ u16 vpd_module;
+ void *vmem;
+ s32 status;
+ u16 *data;
+ u16 i;
+
+ if (hw->eeprom.type == ixgbe_eeprom_uninitialized) {
+ status = ixgbe_init_eeprom_params(hw);
+ if (status)
+ return status;
+ }
+
+ vmem = ixgbe_calloc(hw, IXGBE_SR_SECTOR_SIZE_IN_WORDS, sizeof(u16));
+ if (!vmem)
+ return IXGBE_ERR_OUT_OF_MEM;
+ data = (u16 *)vmem;
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+ if (status)
+ goto ixgbe_calc_sr_checksum_exit;
+ nvm_acquired = true;
+
+ /* read pointer to VPD area */
+ status = ixgbe_read_sr_word_aci(hw, E610_SR_VPD_PTR, &vpd_module);
+ if (status)
+ goto ixgbe_calc_sr_checksum_exit;
+
+ /* read pointer to PCIe Alt Auto-load module */
+ status = ixgbe_read_sr_word_aci(hw, E610_SR_PCIE_ALT_AUTO_LOAD_PTR,
+ &pcie_alt_module);
+ if (status)
+ goto ixgbe_calc_sr_checksum_exit;
+
+ /* Calculate SW checksum that covers the whole 64kB shadow RAM
+ * except the VPD and PCIe ALT Auto-load modules
+ */
+ for (i = 0; i < hw->eeprom.word_size; i++) {
+ /* Read SR page */
+ if ((i % IXGBE_SR_SECTOR_SIZE_IN_WORDS) == 0) {
+ u16 words = IXGBE_SR_SECTOR_SIZE_IN_WORDS;
+
+ status = ixgbe_read_sr_buf_aci(hw, i, &words, data);
+ if (status != IXGBE_SUCCESS)
+ goto ixgbe_calc_sr_checksum_exit;
+ }
+
+ /* Skip Checksum word */
+ if (i == E610_SR_SW_CHECKSUM_WORD)
+ continue;
+ /* Skip VPD module (convert byte size to word count) */
+ if (i >= (u32)vpd_module &&
+ i < ((u32)vpd_module + E610_SR_VPD_SIZE_WORDS))
+ continue;
+ /* Skip PCIe ALT module (convert byte size to word count) */
+ if (i >= (u32)pcie_alt_module &&
+ i < ((u32)pcie_alt_module + E610_SR_PCIE_ALT_SIZE_WORDS))
+ continue;
+
+ checksum_local += data[i % IXGBE_SR_SECTOR_SIZE_IN_WORDS];
+ }
+
+ checksum = (u16)IXGBE_SR_SW_CHECKSUM_BASE - checksum_local;
+
+ixgbe_calc_sr_checksum_exit:
+ if(nvm_acquired)
+ ixgbe_release_nvm(hw);
+ ixgbe_free(hw, vmem);
+
+ if(!status)
+ return (s32)checksum;
+ else
+ return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_E610 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to Shadow RAM, software sends the admin command
+ * to recalculate and update EEPROM checksum and instructs the hardware
+ * to update the flash.
+ * If the EEPROM params are not initialized, the function
+ * initialize them before proceeding.
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_update_eeprom_checksum_E610(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ if (hw->eeprom.type == ixgbe_eeprom_uninitialized) {
+ status = ixgbe_init_eeprom_params(hw);
+ if (status)
+ return status;
+ }
+
+ status = ixgbe_nvm_recalculate_checksum(hw);
+ if (status)
+ return status;
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_WRITE);
+ if (status)
+ return status;
+
+ status = ixgbe_nvm_write_activate(hw, IXGBE_ACI_NVM_ACTIV_REQ_EMPR,
+ NULL);
+ ixgbe_release_nvm(hw);
+
+ return status;
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum_E610 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ * If the EEPROM params are not initialized, the function
+ * initialize them before proceeding.
+ * The function acquires and then releases the NVM ownership.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_validate_eeprom_checksum_E610(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+ u32 status;
+
+ if (hw->eeprom.type == ixgbe_eeprom_uninitialized) {
+ status = ixgbe_init_eeprom_params(hw);
+ if (status)
+ return status;
+ }
+
+ status = ixgbe_nvm_validate_checksum(hw);
+
+ if (status)
+ return status;
+
+ if (checksum_val) {
+ u16 tmp_checksum;
+ status = ixgbe_acquire_nvm(hw, IXGBE_RES_READ);
+ if (status)
+ return status;
+
+ status = ixgbe_read_sr_word_aci(hw, E610_SR_SW_CHECKSUM_WORD,
+ &tmp_checksum);
+ ixgbe_release_nvm(hw);
+
+ if (!status)
+ *checksum_val = tmp_checksum;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_pfa_module_tlv - Reads sub module TLV from NVM PFA
+ * @hw: pointer to hardware structure
+ * @module_tlv: pointer to module TLV to return
+ * @module_tlv_len: pointer to module TLV length to return
+ * @module_type: module type requested
+ *
+ * Finds the requested sub module TLV type from the Preserved Field
+ * Area (PFA) and returns the TLV pointer and length. The caller can
+ * use these to read the variable length TLV value.
+ *
+ * Return: the exit code of the operation.
+ */
+static s32 ixgbe_get_pfa_module_tlv(struct ixgbe_hw *hw, u16 *module_tlv,
+ u16 *module_tlv_len, u16 module_type)
+{
+ u16 pfa_len, pfa_ptr, pfa_end_ptr;
+ u16 next_tlv;
+ s32 status;
+
+ status = ixgbe_read_ee_aci_E610(hw, E610_SR_PFA_PTR, &pfa_ptr);
+ if (status != IXGBE_SUCCESS) {
+ return status;
+ }
+ status = ixgbe_read_ee_aci_E610(hw, pfa_ptr, &pfa_len);
+ if (status != IXGBE_SUCCESS) {
+ return status;
+ }
+ /* Starting with first TLV after PFA length, iterate through the list
+ * of TLVs to find the requested one.
+ */
+ next_tlv = pfa_ptr + 1;
+ pfa_end_ptr = pfa_ptr + pfa_len;
+ while (next_tlv < pfa_end_ptr) {
+ u16 tlv_sub_module_type, tlv_len;
+
+ /* Read TLV type */
+ status = ixgbe_read_ee_aci_E610(hw, next_tlv,
+ &tlv_sub_module_type);
+ if (status != IXGBE_SUCCESS) {
+ break;
+ }
+ /* Read TLV length */
+ status = ixgbe_read_ee_aci_E610(hw, next_tlv + 1, &tlv_len);
+ if (status != IXGBE_SUCCESS) {
+ break;
+ }
+ if (tlv_sub_module_type == module_type) {
+ if (tlv_len) {
+ *module_tlv = next_tlv;
+ *module_tlv_len = tlv_len;
+ return IXGBE_SUCCESS;
+ }
+ return IXGBE_ERR_INVAL_SIZE;
+ }
+ /* Check next TLV, i.e. current TLV pointer + length + 2 words
+ * (for current TLV's type and length)
+ */
+ next_tlv = next_tlv + tlv_len + 2;
+ }
+ /* Module does not exist */
+ return IXGBE_ERR_DOES_NOT_EXIST;
+}
+
+/**
+ * ixgbe_read_pba_string_E610 - Reads part number string from NVM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number string from the NVM
+ * @pba_num_size: part number string buffer length
+ *
+ * Reads the part number string from the NVM.
+ *
+ * Return: the exit code of the operation.
+ */
+s32 ixgbe_read_pba_string_E610(struct ixgbe_hw *hw, u8 *pba_num,
+ u32 pba_num_size)
+{
+ u16 pba_tlv, pba_tlv_len;
+ u16 pba_word, pba_size;
+ s32 status;
+ u16 i;
+
+ status = ixgbe_get_pfa_module_tlv(hw, &pba_tlv, &pba_tlv_len,
+ E610_SR_PBA_BLOCK_PTR);
+ if (status != IXGBE_SUCCESS) {
+ return status;
+ }
+
+ /* pba_size is the next word */
+ status = ixgbe_read_ee_aci_E610(hw, (pba_tlv + 2), &pba_size);
+ if (status != IXGBE_SUCCESS) {
+ return status;
+ }
+
+ if (pba_tlv_len < pba_size) {
+ return IXGBE_ERR_INVAL_SIZE;
+ }
+
+ /* Subtract one to get PBA word count (PBA Size word is included in
+ * total size)
+ */
+ pba_size--;
+ if (pba_num_size < (((u32)pba_size * 2) + 1)) {
+ return IXGBE_ERR_PARAM;
+ }
+
+ for (i = 0; i < pba_size; i++) {
+ status = ixgbe_read_ee_aci_E610(hw, (pba_tlv + 2 + 1) + i,
+ &pba_word);
+ if (status != IXGBE_SUCCESS) {
+ return status;
+ }
+
+ pba_num[(i * 2)] = (pba_word >> 8) & 0xFF;
+ pba_num[(i * 2) + 1] = pba_word & 0xFF;
+ }
+ pba_num[(pba_size * 2)] = '\0';
+
+ return status;
+}
diff --git a/sys/dev/ixgbe/ixgbe_osdep.h b/sys/dev/ixgbe/ixgbe_osdep.h
--- a/sys/dev/ixgbe/ixgbe_osdep.h
+++ b/sys/dev/ixgbe/ixgbe_osdep.h
@@ -133,7 +133,9 @@
/* XXX these need to be revisited */
#define IXGBE_CPU_TO_LE16 htole16
#define IXGBE_CPU_TO_LE32 htole32
+#define IXGBE_LE16_TO_CPU le16toh
#define IXGBE_LE32_TO_CPU le32toh
+#define IXGBE_LE64_TO_CPU le64toh
#define IXGBE_LE32_TO_CPUS(x) *(x) = le32dec(x)
#define IXGBE_CPU_TO_BE16 htobe16
#define IXGBE_CPU_TO_BE32 htobe32
@@ -146,6 +148,7 @@
typedef uint32_t u32;
typedef int32_t s32;
typedef uint64_t u64;
+typedef int64_t s64;
#ifndef __bool_true_false_are_defined
typedef boolean_t bool;
#endif
@@ -195,6 +198,11 @@
bus_space_handle_t mem_bus_space_handle;
};
+struct ixgbe_lock
+{
+ struct mtx mutex;
+};
+
/* These routines need struct ixgbe_hw declared */
struct ixgbe_hw;
device_t ixgbe_dev_from_hw(struct ixgbe_hw *hw);
@@ -222,4 +230,27 @@
#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, val) \
ixgbe_write_reg_array(a, reg, offset, val)
+void ixgbe_init_lock(struct ixgbe_lock *);
+void ixgbe_destroy_lock(struct ixgbe_lock *);
+void ixgbe_acquire_lock(struct ixgbe_lock *);
+void ixgbe_release_lock(struct ixgbe_lock *);
+
+static inline void *
+ixgbe_calloc(struct ixgbe_hw __unused *hw, size_t count, size_t size)
+{
+ return (malloc(count * size, M_DEVBUF, M_ZERO | M_NOWAIT));
+}
+
+static inline void *
+ixgbe_malloc(struct ixgbe_hw __unused *hw, size_t size)
+{
+ return (malloc(size, M_DEVBUF, M_ZERO | M_NOWAIT));
+}
+
+static inline void
+ixgbe_free(struct ixgbe_hw __unused *hw, void *addr)
+{
+ free(addr, M_DEVBUF);
+}
+
#endif /* _IXGBE_OSDEP_H_ */
diff --git a/sys/dev/ixgbe/ixgbe_osdep.c b/sys/dev/ixgbe/ixgbe_osdep.c
--- a/sys/dev/ixgbe/ixgbe_osdep.c
+++ b/sys/dev/ixgbe/ixgbe_osdep.c
@@ -114,3 +114,29 @@
return baudrate;
}
+
+void
+ixgbe_init_lock(struct ixgbe_lock *lock)
+{
+ mtx_init(&lock->mutex, "mutex",
+ "ixgbe ACI lock", MTX_DEF | MTX_DUPOK);
+}
+
+void
+ixgbe_acquire_lock(struct ixgbe_lock *lock)
+{
+ mtx_lock(&lock->mutex);
+}
+
+void
+ixgbe_release_lock(struct ixgbe_lock *lock)
+{
+ mtx_unlock(&lock->mutex);
+}
+
+void
+ixgbe_destroy_lock(struct ixgbe_lock *lock)
+{
+ if (mtx_initialized(&lock->mutex))
+ mtx_destroy(&lock->mutex);
+}
diff --git a/sys/dev/ixgbe/ixgbe_type.h b/sys/dev/ixgbe/ixgbe_type.h
--- a/sys/dev/ixgbe/ixgbe_type.h
+++ b/sys/dev/ixgbe/ixgbe_type.h
@@ -74,6 +74,7 @@
*/
#include "ixgbe_osdep.h"
+#include "ixgbe_type_e610.h"
/* Override this by setting IOMEM in your ixgbe_osdep.h header */
#define IOMEM
@@ -150,12 +151,19 @@
#define IXGBE_DEV_ID_X550EM_X_10G_T 0x15AD
#define IXGBE_DEV_ID_X550EM_X_1G_T 0x15AE
#define IXGBE_DEV_ID_X550EM_X_XFI 0x15B0
+#define IXGBE_DEV_ID_E610_BACKPLANE 0x57AE
+#define IXGBE_DEV_ID_E610_SFP 0x57AF
+#define IXGBE_DEV_ID_E610_10G_T 0x57B0
+#define IXGBE_DEV_ID_E610_2_5G_T 0x57B1
+#define IXGBE_DEV_ID_E610_SGMII 0x57B2
#define IXGBE_DEV_ID_X550_VF_HV 0x1564
#define IXGBE_DEV_ID_X550_VF 0x1565
#define IXGBE_DEV_ID_X550EM_A_VF 0x15C5
#define IXGBE_DEV_ID_X550EM_A_VF_HV 0x15B4
#define IXGBE_DEV_ID_X550EM_X_VF 0x15A8
#define IXGBE_DEV_ID_X550EM_X_VF_HV 0x15A9
+#define IXGBE_DEV_ID_E610_VF 0x57AD
+#define IXGBE_SUBDEV_ID_E610_VF_HV 0x0001
#define IXGBE_CAT(r, m) IXGBE_##r##m
@@ -1969,6 +1977,7 @@
#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */
#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */
#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */
+#define IXGBE_EICR_FW_EVENT 0x00200000 /* Async FW event */
#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */
#define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */
#define IXGBE_EICR_TIMESYNC 0x01000000 /* Timesync Event */
@@ -2004,6 +2013,7 @@
#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */
#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EICS_FW_EVENT IXGBE_EICR_FW_EVENT /* Async FW event */
#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
#define IXGBE_EICS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */
#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
@@ -2025,6 +2035,7 @@
#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */
#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EIMS_FW_EVENT IXGBE_EICR_FW_EVENT /* Async FW event */
#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
#define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermal Sensor Event */
#define IXGBE_EIMS_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */
@@ -2047,6 +2058,7 @@
#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */
#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EIMC_FW_EVENT IXGBE_EICR_FW_EVENT /* Async FW event */
#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
#define IXGBE_EIMC_TIMESYNC IXGBE_EICR_TIMESYNC /* Timesync Event */
#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
@@ -2454,6 +2466,7 @@
#define IXGBE_82599_SERIAL_NUMBER_MAC_ADDR 0x11
#define IXGBE_X550_SERIAL_NUMBER_MAC_ADDR 0x04
+#define IXGBE_PCIE_MSIX_LKV_CAPS 0xB2
#define IXGBE_PCIE_MSIX_82599_CAPS 0x72
#define IXGBE_MAX_MSIX_VECTORS_82599 0x40
#define IXGBE_PCIE_MSIX_82598_CAPS 0x62
@@ -2571,6 +2584,7 @@
#define IXGBE_PCI_DEVICE_STATUS 0xAA
#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020
#define IXGBE_PCI_LINK_STATUS 0xB2
+#define IXGBE_PCI_LINK_STATUS_E610 0x82
#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
#define IXGBE_PCI_LINK_WIDTH 0x3F0
#define IXGBE_PCI_LINK_WIDTH_1 0x10
@@ -2581,6 +2595,7 @@
#define IXGBE_PCI_LINK_SPEED_2500 0x1
#define IXGBE_PCI_LINK_SPEED_5000 0x2
#define IXGBE_PCI_LINK_SPEED_8000 0x3
+#define IXGBE_PCI_LINK_SPEED_16000 0x4
#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
@@ -3743,6 +3758,8 @@
ixgbe_mac_X550_vf,
ixgbe_mac_X550EM_x_vf,
ixgbe_mac_X550EM_a_vf,
+ ixgbe_mac_E610,
+ ixgbe_mac_E610_vf,
ixgbe_num_macs
};
@@ -3822,7 +3839,9 @@
ixgbe_media_type_copper,
ixgbe_media_type_backplane,
ixgbe_media_type_cx4,
- ixgbe_media_type_virtual
+ ixgbe_media_type_virtual,
+ ixgbe_media_type_da,
+ ixgbe_media_type_aui
};
/* Flow Control Settings */
@@ -3831,6 +3850,7 @@
ixgbe_fc_rx_pause,
ixgbe_fc_tx_pause,
ixgbe_fc_full,
+ ixgbe_fc_auto,
ixgbe_fc_default
};
@@ -3863,6 +3883,7 @@
ixgbe_bus_speed_2500 = 2500,
ixgbe_bus_speed_5000 = 5000,
ixgbe_bus_speed_8000 = 8000,
+ ixgbe_bus_speed_16000 = 16000,
ixgbe_bus_speed_reserved
};
@@ -4007,6 +4028,7 @@
s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
s32 (*update_checksum)(struct ixgbe_hw *);
s32 (*calc_checksum)(struct ixgbe_hw *);
+ s32 (*read_pba_string)(struct ixgbe_hw *, u8 *, u32);
};
struct ixgbe_mac_operations {
@@ -4118,6 +4140,10 @@
void (*mdd_event)(struct ixgbe_hw *hw, u32 *vf_bitmap);
void (*restore_mdd_vf)(struct ixgbe_hw *hw, u32 vf);
bool (*fw_recovery_mode)(struct ixgbe_hw *hw);
+ bool (*fw_rollback_mode)(struct ixgbe_hw *hw);
+ bool (*get_fw_tsam_mode)(struct ixgbe_hw *hw);
+ s32 (*get_fw_version)(struct ixgbe_hw *hw);
+ s32 (*get_nvm_version)(struct ixgbe_hw *hw, struct ixgbe_nvm_info *nvm);
};
struct ixgbe_phy_operations {
@@ -4162,6 +4188,9 @@
struct ixgbe_link_info {
struct ixgbe_link_operations ops;
u8 addr;
+ struct ixgbe_link_status link_info;
+ struct ixgbe_link_status link_info_old;
+ u8 get_link_info;
};
struct ixgbe_eeprom_info {
@@ -4233,6 +4262,9 @@
bool reset_if_overtemp;
bool qsfp_shared_i2c_bus;
u32 nw_mng_if_sel;
+ u64 phy_type_low;
+ u64 phy_type_high;
+ struct ixgbe_aci_cmd_set_phy_cfg_data curr_user_phy_cfg;
};
#include "ixgbe_mbx.h"
@@ -4261,6 +4293,22 @@
bool wol_enabled;
bool need_crosstalk_fix;
u32 fw_rst_cnt;
+ u8 api_branch;
+ u8 api_maj_ver;
+ u8 api_min_ver;
+ u8 api_patch;
+ u8 fw_branch;
+ u8 fw_maj_ver;
+ u8 fw_min_ver;
+ u8 fw_patch;
+ u32 fw_build;
+ struct ixgbe_aci_info aci;
+ struct ixgbe_flash_info flash;
+ struct ixgbe_hw_dev_caps dev_caps;
+ struct ixgbe_hw_func_caps func_caps;
+ struct ixgbe_fwlog_cfg fwlog_cfg;
+ bool fwlog_support_ena;
+ struct ixgbe_fwlog_ring fwlog_ring;
};
#define ixgbe_call_func(hw, func, params, error) \
@@ -4312,6 +4360,24 @@
#define IXGBE_ERR_MBX_NOMSG -42
#define IXGBE_ERR_TIMEOUT -43
+#define IXGBE_ERR_NOT_SUPPORTED -45
+#define IXGBE_ERR_OUT_OF_RANGE -46
+
+#define IXGBE_ERR_NVM -50
+#define IXGBE_ERR_NVM_CHECKSUM -51
+#define IXGBE_ERR_BUF_TOO_SHORT -52
+#define IXGBE_ERR_NVM_BLANK_MODE -53
+#define IXGBE_ERR_INVAL_SIZE -54
+#define IXGBE_ERR_DOES_NOT_EXIST -55
+
+#define IXGBE_ERR_ACI_ERROR -100
+#define IXGBE_ERR_ACI_DISABLED -101
+#define IXGBE_ERR_ACI_TIMEOUT -102
+#define IXGBE_ERR_ACI_BUSY -103
+#define IXGBE_ERR_ACI_NO_WORK -104
+#define IXGBE_ERR_ACI_NO_EVENTS -105
+#define IXGBE_ERR_FW_API_VER -106
+
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
@@ -4540,5 +4606,6 @@
#define IXGBE_REQUEST_TASK_FDIR 0x08
#define IXGBE_REQUEST_TASK_PHY 0x10
#define IXGBE_REQUEST_TASK_LSC 0x20
+#define IXGBE_REQUEST_TASK_FWEVENT 0x40
#endif /* _IXGBE_TYPE_H_ */
diff --git a/sys/dev/ixgbe/ixgbe_type_e610.h b/sys/dev/ixgbe/ixgbe_type_e610.h
new file mode 100644
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_type_e610.h
@@ -0,0 +1,2278 @@
+/******************************************************************************
+ SPDX-License-Identifier: BSD-3-Clause
+
+ Copyright (c) 2025, Intel Corporation
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+
+******************************************************************************/
+
+#ifndef _IXGBE_TYPE_E610_H_
+#define _IXGBE_TYPE_E610_H_
+
+
+/* Generic defines */
+#ifndef BIT
+#define BIT(a) (1UL << (a))
+#endif /* !BIT */
+#ifndef BIT_ULL
+#define BIT_ULL(a) (1ULL << (a))
+#endif /* !BIT_ULL */
+#ifndef BITS_PER_BYTE
+#define BITS_PER_BYTE 8
+#endif /* !BITS_PER_BYTE */
+#ifndef DIVIDE_AND_ROUND_UP
+#define DIVIDE_AND_ROUND_UP(a, b) (((a) + (b) - 1) / (b))
+#endif /* !DIVIDE_AND_ROUND_UP */
+
+#ifndef ROUND_UP
+/**
+ * ROUND_UP - round up to next arbitrary multiple (not a power of 2)
+ * @a: value to round up
+ * @b: arbitrary multiple
+ *
+ * Round up to the next multiple of the arbitrary b.
+ */
+#define ROUND_UP(a, b) ((b) * DIVIDE_AND_ROUND_UP((a), (b)))
+#endif /* !ROUND_UP */
+
+#define MAKEMASK(mask, shift) (mask << shift)
+
+#define BYTES_PER_WORD 2
+#define BYTES_PER_DWORD 4
+
+#ifndef BITS_PER_LONG
+#define BITS_PER_LONG 64
+#endif /* !BITS_PER_LONG */
+#ifndef BITS_PER_LONG_LONG
+#define BITS_PER_LONG_LONG 64
+#endif /* !BITS_PER_LONG_LONG */
+#undef GENMASK
+#define GENMASK(h, l) \
+ (((~0UL) << (l)) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
+#undef GENMASK_ULL
+#define GENMASK_ULL(h, l) \
+ (((~0ULL) << (l)) & (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
+
+/* Data type manipulation macros. */
+#define HI_DWORD(x) ((u32)((((x) >> 16) >> 16) & 0xFFFFFFFF))
+#define LO_DWORD(x) ((u32)((x) & 0xFFFFFFFF))
+#define HI_WORD(x) ((u16)(((x) >> 16) & 0xFFFF))
+#define LO_WORD(x) ((u16)((x) & 0xFFFF))
+#define HI_BYTE(x) ((u8)(((x) >> 8) & 0xFF))
+#define LO_BYTE(x) ((u8)((x) & 0xFF))
+
+#ifndef MIN_T
+#define MIN_T(_t, _a, _b) min((_t)(_a), (_t)(_b))
+#endif
+
+#define IS_ASCII(_ch) ((_ch) < 0x80)
+
+/**
+ * ixgbe_struct_size - size of struct with C99 flexible array member
+ * @ptr: pointer to structure
+ * @field: flexible array member (last member of the structure)
+ * @num: number of elements of that flexible array member
+ */
+#define ixgbe_struct_size(ptr, field, num) \
+ (sizeof(*(ptr)) + sizeof(*(ptr)->field) * (num))
+
+/* General E610 defines */
+#define IXGBE_MAX_VSI 768
+
+/* Auxiliary field, mask and shift definition for Shadow RAM and NVM Flash */
+#define E610_SR_VPD_SIZE_WORDS 512
+#define E610_SR_PCIE_ALT_SIZE_WORDS 512
+
+/* Checksum and Shadow RAM pointers */
+#define E610_SR_NVM_DEV_STARTER_VER 0x18
+#define E610_NVM_VER_LO_SHIFT 0
+#define E610_NVM_VER_LO_MASK (0xff << E610_NVM_VER_LO_SHIFT)
+#define E610_NVM_VER_HI_SHIFT 12
+#define E610_NVM_VER_HI_MASK (0xf << E610_NVM_VER_HI_SHIFT)
+#define E610_SR_NVM_MAP_VER 0x29
+#define E610_SR_NVM_EETRACK_LO 0x2D
+#define E610_SR_NVM_EETRACK_HI 0x2E
+#define E610_SR_VPD_PTR 0x2F
+#define E610_SR_PCIE_ALT_AUTO_LOAD_PTR 0x3E
+#define E610_SR_SW_CHECKSUM_WORD 0x3F
+#define E610_SR_PFA_PTR 0x40
+#define E610_SR_1ST_NVM_BANK_PTR 0x42
+#define E610_SR_NVM_BANK_SIZE 0x43
+#define E610_SR_1ST_OROM_BANK_PTR 0x44
+#define E610_SR_OROM_BANK_SIZE 0x45
+#define E610_SR_NETLIST_BANK_PTR 0x46
+#define E610_SR_NETLIST_BANK_SIZE 0x47
+#define E610_SR_POINTER_TYPE_BIT BIT(15)
+#define E610_SR_POINTER_MASK 0x7fff
+#define E610_SR_HALF_4KB_SECTOR_UNITS 2048
+#define E610_GET_PFA_POINTER_IN_WORDS(offset) \
+ ((offset & E610_SR_POINTER_TYPE_BIT) == E610_SR_POINTER_TYPE_BIT) ? \
+ ((offset & E610_SR_POINTER_MASK) * E610_SR_HALF_4KB_SECTOR_UNITS) : \
+ (offset & E610_SR_POINTER_MASK)
+
+/* Checksum and Shadow RAM pointers */
+#define E610_SR_NVM_CTRL_WORD 0x00
+#define E610_SR_PBA_BLOCK_PTR 0x16
+
+/* The Orom version topology */
+#define IXGBE_OROM_VER_PATCH_SHIFT 0
+#define IXGBE_OROM_VER_PATCH_MASK (0xff << IXGBE_OROM_VER_PATCH_SHIFT)
+#define IXGBE_OROM_VER_BUILD_SHIFT 8
+#define IXGBE_OROM_VER_BUILD_MASK (0xffff << IXGBE_OROM_VER_BUILD_SHIFT)
+#define IXGBE_OROM_VER_SHIFT 24
+#define IXGBE_OROM_VER_MASK (0xff << IXGBE_OROM_VER_SHIFT)
+
+/* CSS Header words */
+#define IXGBE_NVM_CSS_HDR_LEN_L 0x02
+#define IXGBE_NVM_CSS_HDR_LEN_H 0x03
+#define IXGBE_NVM_CSS_SREV_L 0x14
+#define IXGBE_NVM_CSS_SREV_H 0x15
+
+/* Length of Authentication header section in words */
+#define IXGBE_NVM_AUTH_HEADER_LEN 0x08
+
+/* The Netlist ID Block is located after all of the Link Topology nodes. */
+#define IXGBE_NETLIST_ID_BLK_SIZE 0x30
+#define IXGBE_NETLIST_ID_BLK_OFFSET(n) IXGBE_NETLIST_LINK_TOPO_OFFSET(0x0004 + 2 * (n))
+
+/* netlist ID block field offsets (word offsets) */
+#define IXGBE_NETLIST_ID_BLK_MAJOR_VER_LOW 0x02
+#define IXGBE_NETLIST_ID_BLK_MAJOR_VER_HIGH 0x03
+#define IXGBE_NETLIST_ID_BLK_MINOR_VER_LOW 0x04
+#define IXGBE_NETLIST_ID_BLK_MINOR_VER_HIGH 0x05
+#define IXGBE_NETLIST_ID_BLK_TYPE_LOW 0x06
+#define IXGBE_NETLIST_ID_BLK_TYPE_HIGH 0x07
+#define IXGBE_NETLIST_ID_BLK_REV_LOW 0x08
+#define IXGBE_NETLIST_ID_BLK_REV_HIGH 0x09
+#define IXGBE_NETLIST_ID_BLK_SHA_HASH_WORD(n) (0x0A + (n))
+#define IXGBE_NETLIST_ID_BLK_CUST_VER 0x2F
+
+/* The Link Topology Netlist section is stored as a series of words. It is
+ * stored in the NVM as a TLV, with the first two words containing the type
+ * and length.
+ */
+#define IXGBE_NETLIST_LINK_TOPO_MOD_ID 0x011B
+#define IXGBE_NETLIST_TYPE_OFFSET 0x0000
+#define IXGBE_NETLIST_LEN_OFFSET 0x0001
+
+/* The Link Topology section follows the TLV header. When reading the netlist
+ * using ixgbe_read_netlist_module, we need to account for the 2-word TLV
+ * header.
+ */
+#define IXGBE_NETLIST_LINK_TOPO_OFFSET(n) ((n) + 2)
+#define IXGBE_LINK_TOPO_MODULE_LEN IXGBE_NETLIST_LINK_TOPO_OFFSET(0x0000)
+#define IXGBE_LINK_TOPO_NODE_COUNT IXGBE_NETLIST_LINK_TOPO_OFFSET(0x0001)
+#define IXGBE_LINK_TOPO_NODE_COUNT_M MAKEMASK(0x3FF, 0)
+
+/* Auxiliary field, mask and shift definition for Shadow RAM and NVM Flash */
+#define IXGBE_SR_CTRL_WORD_1_S 0x06
+#define IXGBE_SR_CTRL_WORD_1_M (0x03 << IXGBE_SR_CTRL_WORD_1_S)
+#define IXGBE_SR_CTRL_WORD_VALID 0x1
+#define IXGBE_SR_CTRL_WORD_OROM_BANK BIT(3)
+#define IXGBE_SR_CTRL_WORD_NETLIST_BANK BIT(4)
+#define IXGBE_SR_CTRL_WORD_NVM_BANK BIT(5)
+#define IXGBE_SR_NVM_PTR_4KB_UNITS BIT(15)
+
+/* These macros strip from NVM Image Revision the particular part of NVM ver:
+ major ver, minor ver and image id */
+#define E610_NVM_MAJOR_VER(x) ((x & 0xF000) >> 12)
+#define E610_NVM_MINOR_VER(x) (x & 0x00FF)
+
+/* Shadow RAM related */
+#define IXGBE_SR_SECTOR_SIZE_IN_WORDS 0x800
+#define IXGBE_SR_WORDS_IN_1KB 512
+/* Checksum should be calculated such that after adding all the words,
+ * including the checksum word itself, the sum should be 0xBABA.
+ */
+#define IXGBE_SR_SW_CHECKSUM_BASE 0xBABA
+
+/* Netlist */
+#define IXGBE_MAX_NETLIST_SIZE 10
+
+/* General registers */
+
+/* Firmware Status Register (GL_FWSTS) */
+#define GL_FWSTS 0x00083048 /* Reset Source: POR */
+#define GL_FWSTS_FWS0B_S 0
+#define GL_FWSTS_FWS0B_M MAKEMASK(0xFF, 0)
+#define GL_FWSTS_FWROWD_S 8
+#define GL_FWSTS_FWROWD_M BIT(8)
+#define GL_FWSTS_FWRI_S 9
+#define GL_FWSTS_FWRI_M BIT(9)
+#define GL_FWSTS_FWS1B_S 16
+#define GL_FWSTS_FWS1B_M MAKEMASK(0xFF, 16)
+#define GL_FWSTS_EP_PF0 BIT(24)
+#define GL_FWSTS_EP_PF1 BIT(25)
+
+/* Recovery mode values of Firmware Status 1 Byte (FWS1B) bitfield */
+#define GL_FWSTS_FWS1B_RECOVERY_MODE_CORER_LEGACY 0x0B
+#define GL_FWSTS_FWS1B_RECOVERY_MODE_GLOBR_LEGACY 0x0C
+#define GL_FWSTS_FWS1B_RECOVERY_MODE_CORER 0x30
+#define GL_FWSTS_FWS1B_RECOVERY_MODE_GLOBR 0x31
+#define GL_FWSTS_FWS1B_RECOVERY_MODE_TRANSITION 0x32
+#define GL_FWSTS_FWS1B_RECOVERY_MODE_NVM 0x33
+
+/* Firmware Status (GL_MNG_FWSM) */
+#define GL_MNG_FWSM 0x000B6134 /* Reset Source: POR */
+#define GL_MNG_FWSM_FW_MODES_S 0
+#define GL_MNG_FWSM_FW_MODES_M MAKEMASK(0x7, 0)
+#define GL_MNG_FWSM_RSV0_S 2
+#define GL_MNG_FWSM_RSV0_M MAKEMASK(0xFF, 2)
+#define GL_MNG_FWSM_EEP_RELOAD_IND_S 10
+#define GL_MNG_FWSM_EEP_RELOAD_IND_M BIT(10)
+#define GL_MNG_FWSM_RSV1_S 11
+#define GL_MNG_FWSM_RSV1_M MAKEMASK(0xF, 11)
+#define GL_MNG_FWSM_RSV2_S 15
+#define GL_MNG_FWSM_RSV2_M BIT(15)
+#define GL_MNG_FWSM_PCIR_AL_FAILURE_S 16
+#define GL_MNG_FWSM_PCIR_AL_FAILURE_M BIT(16)
+#define GL_MNG_FWSM_POR_AL_FAILURE_S 17
+#define GL_MNG_FWSM_POR_AL_FAILURE_M BIT(17)
+#define GL_MNG_FWSM_RSV3_S 18
+#define GL_MNG_FWSM_RSV3_M BIT(18)
+#define GL_MNG_FWSM_EXT_ERR_IND_S 19
+#define GL_MNG_FWSM_EXT_ERR_IND_M MAKEMASK(0x3F, 19)
+#define GL_MNG_FWSM_RSV4_S 25
+#define GL_MNG_FWSM_RSV4_M BIT(25)
+#define GL_MNG_FWSM_RESERVED_11_S 26
+#define GL_MNG_FWSM_RESERVED_11_M MAKEMASK(0xF, 26)
+#define GL_MNG_FWSM_RSV5_S 30
+#define GL_MNG_FWSM_RSV5_M MAKEMASK(0x3, 30)
+
+/* FW mode indications */
+#define GL_MNG_FWSM_FW_MODES_DEBUG_M BIT(0)
+#define GL_MNG_FWSM_FW_MODES_RECOVERY_M BIT(1)
+#define GL_MNG_FWSM_FW_MODES_ROLLBACK_M BIT(2)
+
+/* Global NVM General Status Register */
+#define GLNVM_GENS 0x000B6100 /* Reset Source: POR */
+#define GLNVM_GENS_NVM_PRES_S 0
+#define GLNVM_GENS_NVM_PRES_M BIT(0)
+#define GLNVM_GENS_SR_SIZE_S 5
+#define GLNVM_GENS_SR_SIZE_M MAKEMASK(0x7, 5)
+#define GLNVM_GENS_BANK1VAL_S 8
+#define GLNVM_GENS_BANK1VAL_M BIT(8)
+#define GLNVM_GENS_ALT_PRST_S 23
+#define GLNVM_GENS_ALT_PRST_M BIT(23)
+#define GLNVM_GENS_FL_AUTO_RD_S 25
+#define GLNVM_GENS_FL_AUTO_RD_M BIT(25)
+
+/* Flash Access Register */
+#define GLNVM_FLA 0x000B6108 /* Reset Source: POR */
+#define GLNVM_FLA_LOCKED_S 6
+#define GLNVM_FLA_LOCKED_M BIT(6)
+
+/* Bit Bang registers */
+#define RDASB_MSGCTL 0x000B6820
+#define RDASB_MSGCTL_HDR_DWS_S 0
+#define RDASB_MSGCTL_EXP_RDW_S 8
+#define RDASB_MSGCTL_CMDV_M BIT(31)
+#define RDASB_RSPCTL 0x000B6824
+#define RDASB_RSPCTL_BAD_LENGTH_M BIT(30)
+#define RDASB_RSPCTL_NOT_SUCCESS_M BIT(31)
+#define RDASB_WHDR0 0x000B68F4
+#define RDASB_WHDR1 0x000B68F8
+#define RDASB_WHDR2 0x000B68FC
+#define RDASB_WHDR3 0x000B6900
+#define RDASB_WHDR4 0x000B6904
+#define RDASB_RHDR0 0x000B6AFC
+#define RDASB_RHDR0_RESPONSE_S 27
+#define RDASB_RHDR0_RESPONSE_M MAKEMASK(0x7, 27)
+#define RDASB_RDATA0 0x000B6B00
+#define RDASB_RDATA1 0x000B6B04
+
+/* SPI Registers */
+#define SPISB_MSGCTL 0x000B7020
+#define SPISB_MSGCTL_HDR_DWS_S 0
+#define SPISB_MSGCTL_EXP_RDW_S 8
+#define SPISB_MSGCTL_MSG_MODE_S 26
+#define SPISB_MSGCTL_TOKEN_MODE_S 28
+#define SPISB_MSGCTL_BARCLR_S 30
+#define SPISB_MSGCTL_CMDV_S 31
+#define SPISB_MSGCTL_CMDV_M BIT(31)
+#define SPISB_RSPCTL 0x000B7024
+#define SPISB_RSPCTL_BAD_LENGTH_M BIT(30)
+#define SPISB_RSPCTL_NOT_SUCCESS_M BIT(31)
+#define SPISB_WHDR0 0x000B70F4
+#define SPISB_WHDR0_DEST_SEL_S 12
+#define SPISB_WHDR0_OPCODE_SEL_S 16
+#define SPISB_WHDR0_TAG_S 24
+#define SPISB_WHDR1 0x000B70F8
+#define SPISB_WHDR2 0x000B70FC
+#define SPISB_RDATA 0x000B7300
+#define SPISB_WDATA 0x000B7100
+
+/* Firmware Reset Count register */
+#define GL_FWRESETCNT 0x00083100 /* Reset Source: POR */
+#define GL_FWRESETCNT_FWRESETCNT_S 0
+#define GL_FWRESETCNT_FWRESETCNT_M MAKEMASK(0xFFFFFFFF, 0)
+
+/* Admin Command Interface (ACI) registers */
+#define PF_HIDA(_i) (0x00085000 + ((_i) * 4))
+#define PF_HIDA_2(_i) (0x00085020 + ((_i) * 4))
+#define PF_HIBA(_i) (0x00084000 + ((_i) * 4))
+#define PF_HICR 0x00082048
+
+#define PF_HIDA_MAX_INDEX 15
+#define PF_HIBA_MAX_INDEX 1023
+
+#define PF_HICR_EN BIT(0)
+#define PF_HICR_C BIT(1)
+#define PF_HICR_SV BIT(2)
+#define PF_HICR_EV BIT(3)
+
+#define GL_HIDA(_i) (0x00082000 + ((_i) * 4))
+#define GL_HIDA_2(_i) (0x00082020 + ((_i) * 4))
+#define GL_HIBA(_i) (0x00081000 + ((_i) * 4))
+#define GL_HICR 0x00082040
+
+#define GL_HIDA_MAX_INDEX 15
+#define GL_HIBA_MAX_INDEX 1023
+
+#define GL_HICR_C BIT(1)
+#define GL_HICR_SV BIT(2)
+#define GL_HICR_EV BIT(3)
+
+#define GL_HICR_EN 0x00082044
+
+#define GL_HICR_EN_CHECK BIT(0)
+
+/* Admin Command Interface (ACI) defines */
+/* Defines that help manage the driver vs FW API checks.
+ */
+#define IXGBE_FW_API_VER_BRANCH 0x00
+#define IXGBE_FW_API_VER_MAJOR 0x01
+#define IXGBE_FW_API_VER_MINOR 0x07
+#define IXGBE_FW_API_VER_DIFF_ALLOWED 0x02
+
+#define IXGBE_ACI_DESC_SIZE 32
+#define IXGBE_ACI_DESC_SIZE_IN_DWORDS IXGBE_ACI_DESC_SIZE / BYTES_PER_DWORD
+
+#define IXGBE_ACI_MAX_BUFFER_SIZE 4096 /* Size in bytes */
+#define IXGBE_ACI_DESC_COOKIE_L_DWORD_OFFSET 3
+#define IXGBE_ACI_SEND_DELAY_TIME_MS 10
+#define IXGBE_ACI_SEND_MAX_EXECUTE 3
+/* [ms] timeout of waiting for sync response */
+#define IXGBE_ACI_SYNC_RESPONSE_TIMEOUT 100000
+/* [ms] timeout of waiting for async response */
+#define IXGBE_ACI_ASYNC_RESPONSE_TIMEOUT 150000
+/* [ms] timeout of waiting for resource release */
+#define IXGBE_ACI_RELEASE_RES_TIMEOUT 10000
+
+/* Timestamp spacing for Tools ACI: queue is active if spacing is within the range [LO..HI] */
+#define IXGBE_TOOLS_ACI_ACTIVE_STAMP_SPACING_LO 0
+#define IXGBE_TOOLS_ACI_ACTIVE_STAMP_SPACING_HI 200
+
+/* Timestamp spacing for Tools ACI: queue is expired if spacing is outside the range [LO..HI] */
+#define IXGBE_TOOLS_ACI_EXPIRED_STAMP_SPACING_LO -5
+#define IXGBE_TOOLS_ACI_EXPIRED_STAMP_SPACING_HI 205
+
+/* FW defined boundary for a large buffer, 4k >= Large buffer > 512 bytes */
+#define IXGBE_ACI_LG_BUF 512
+
+/* Flags sub-structure
+ * |0 |1 |2 |3 |4 |5 |6 |7 |8 |9 |10 |11 |12 |13 |14 |15 |
+ * |DD |CMP|ERR|VFE| * * RESERVED * * |LB |RD |VFC|BUF|SI |EI |FE |
+ */
+
+/* command flags and offsets */
+#define IXGBE_ACI_FLAG_DD_S 0
+#define IXGBE_ACI_FLAG_CMP_S 1
+#define IXGBE_ACI_FLAG_ERR_S 2
+#define IXGBE_ACI_FLAG_VFE_S 3
+#define IXGBE_ACI_FLAG_LB_S 9
+#define IXGBE_ACI_FLAG_RD_S 10
+#define IXGBE_ACI_FLAG_VFC_S 11
+#define IXGBE_ACI_FLAG_BUF_S 12
+#define IXGBE_ACI_FLAG_SI_S 13
+#define IXGBE_ACI_FLAG_EI_S 14
+#define IXGBE_ACI_FLAG_FE_S 15
+
+#define IXGBE_ACI_FLAG_DD BIT(IXGBE_ACI_FLAG_DD_S) /* 0x1 */
+#define IXGBE_ACI_FLAG_CMP BIT(IXGBE_ACI_FLAG_CMP_S) /* 0x2 */
+#define IXGBE_ACI_FLAG_ERR BIT(IXGBE_ACI_FLAG_ERR_S) /* 0x4 */
+#define IXGBE_ACI_FLAG_VFE BIT(IXGBE_ACI_FLAG_VFE_S) /* 0x8 */
+#define IXGBE_ACI_FLAG_LB BIT(IXGBE_ACI_FLAG_LB_S) /* 0x200 */
+#define IXGBE_ACI_FLAG_RD BIT(IXGBE_ACI_FLAG_RD_S) /* 0x400 */
+#define IXGBE_ACI_FLAG_VFC BIT(IXGBE_ACI_FLAG_VFC_S) /* 0x800 */
+#define IXGBE_ACI_FLAG_BUF BIT(IXGBE_ACI_FLAG_BUF_S) /* 0x1000 */
+#define IXGBE_ACI_FLAG_SI BIT(IXGBE_ACI_FLAG_SI_S) /* 0x2000 */
+#define IXGBE_ACI_FLAG_EI BIT(IXGBE_ACI_FLAG_EI_S) /* 0x4000 */
+#define IXGBE_ACI_FLAG_FE BIT(IXGBE_ACI_FLAG_FE_S) /* 0x8000 */
+
+/* Admin Command Interface (ACI) error codes */
+enum ixgbe_aci_err {
+ IXGBE_ACI_RC_OK = 0, /* Success */
+ IXGBE_ACI_RC_EPERM = 1, /* Operation not permitted */
+ IXGBE_ACI_RC_ENOENT = 2, /* No such element */
+ IXGBE_ACI_RC_ESRCH = 3, /* Bad opcode */
+ IXGBE_ACI_RC_EINTR = 4, /* Operation interrupted */
+ IXGBE_ACI_RC_EIO = 5, /* I/O error */
+ IXGBE_ACI_RC_ENXIO = 6, /* No such resource */
+ IXGBE_ACI_RC_E2BIG = 7, /* Arg too long */
+ IXGBE_ACI_RC_EAGAIN = 8, /* Try again */
+ IXGBE_ACI_RC_ENOMEM = 9, /* Out of memory */
+ IXGBE_ACI_RC_EACCES = 10, /* Permission denied */
+ IXGBE_ACI_RC_EFAULT = 11, /* Bad address */
+ IXGBE_ACI_RC_EBUSY = 12, /* Device or resource busy */
+ IXGBE_ACI_RC_EEXIST = 13, /* Object already exists */
+ IXGBE_ACI_RC_EINVAL = 14, /* Invalid argument */
+ IXGBE_ACI_RC_ENOTTY = 15, /* Not a typewriter */
+ IXGBE_ACI_RC_ENOSPC = 16, /* No space left or allocation failure */
+ IXGBE_ACI_RC_ENOSYS = 17, /* Function not implemented */
+ IXGBE_ACI_RC_ERANGE = 18, /* Parameter out of range */
+ IXGBE_ACI_RC_EFLUSHED = 19, /* Cmd flushed due to prev cmd error */
+ IXGBE_ACI_RC_BAD_ADDR = 20, /* Descriptor contains a bad pointer */
+ IXGBE_ACI_RC_EMODE = 21, /* Op not allowed in current dev mode */
+ IXGBE_ACI_RC_EFBIG = 22, /* File too big */
+ IXGBE_ACI_RC_ESBCOMP = 23, /* SB-IOSF completion unsuccessful */
+ IXGBE_ACI_RC_ENOSEC = 24, /* Missing security manifest */
+ IXGBE_ACI_RC_EBADSIG = 25, /* Bad RSA signature */
+ IXGBE_ACI_RC_ESVN = 26, /* SVN number prohibits this package */
+ IXGBE_ACI_RC_EBADMAN = 27, /* Manifest hash mismatch */
+ IXGBE_ACI_RC_EBADBUF = 28, /* Buffer hash mismatches manifest */
+ IXGBE_ACI_RC_EACCES_BMCU = 29, /* BMC Update in progress */
+};
+
+/* Admin Command Interface (ACI) opcodes */
+enum ixgbe_aci_opc {
+ ixgbe_aci_opc_get_ver = 0x0001,
+ ixgbe_aci_opc_driver_ver = 0x0002,
+ ixgbe_aci_opc_get_exp_err = 0x0005,
+
+ /* resource ownership */
+ ixgbe_aci_opc_req_res = 0x0008,
+ ixgbe_aci_opc_release_res = 0x0009,
+
+ /* device/function capabilities */
+ ixgbe_aci_opc_list_func_caps = 0x000A,
+ ixgbe_aci_opc_list_dev_caps = 0x000B,
+
+ /* safe disable of RXEN */
+ ixgbe_aci_opc_disable_rxen = 0x000C,
+
+ /* FW events */
+ ixgbe_aci_opc_get_fw_event = 0x0014,
+
+ /* PHY commands */
+ ixgbe_aci_opc_get_phy_caps = 0x0600,
+ ixgbe_aci_opc_set_phy_cfg = 0x0601,
+ ixgbe_aci_opc_restart_an = 0x0605,
+ ixgbe_aci_opc_get_link_status = 0x0607,
+ ixgbe_aci_opc_set_event_mask = 0x0613,
+ ixgbe_aci_opc_get_link_topo = 0x06E0,
+ ixgbe_aci_opc_read_i2c = 0x06E2,
+ ixgbe_aci_opc_write_i2c = 0x06E3,
+ ixgbe_aci_opc_read_mdio = 0x06E4,
+ ixgbe_aci_opc_write_mdio = 0x06E5,
+ ixgbe_aci_opc_set_gpio_by_func = 0x06E6,
+ ixgbe_aci_opc_get_gpio_by_func = 0x06E7,
+ ixgbe_aci_opc_set_port_id_led = 0x06E9,
+ ixgbe_aci_opc_set_gpio = 0x06EC,
+ ixgbe_aci_opc_get_gpio = 0x06ED,
+ ixgbe_aci_opc_sff_eeprom = 0x06EE,
+ ixgbe_aci_opc_prog_topo_dev_nvm = 0x06F2,
+ ixgbe_aci_opc_read_topo_dev_nvm = 0x06F3,
+
+ /* NVM commands */
+ ixgbe_aci_opc_nvm_read = 0x0701,
+ ixgbe_aci_opc_nvm_erase = 0x0702,
+ ixgbe_aci_opc_nvm_write = 0x0703,
+ ixgbe_aci_opc_nvm_cfg_read = 0x0704,
+ ixgbe_aci_opc_nvm_cfg_write = 0x0705,
+ ixgbe_aci_opc_nvm_checksum = 0x0706,
+ ixgbe_aci_opc_nvm_write_activate = 0x0707,
+ ixgbe_aci_opc_nvm_sr_dump = 0x0707,
+ ixgbe_aci_opc_nvm_save_factory_settings = 0x0708,
+ ixgbe_aci_opc_nvm_update_empr = 0x0709,
+ ixgbe_aci_opc_nvm_pkg_data = 0x070A,
+ ixgbe_aci_opc_nvm_pass_component_tbl = 0x070B,
+ ixgbe_aci_opc_nvm_sanitization = 0x070C,
+
+ /* Alternate Structure Commands */
+ ixgbe_aci_opc_write_alt_direct = 0x0900,
+ ixgbe_aci_opc_write_alt_indirect = 0x0901,
+ ixgbe_aci_opc_read_alt_direct = 0x0902,
+ ixgbe_aci_opc_read_alt_indirect = 0x0903,
+ ixgbe_aci_opc_done_alt_write = 0x0904,
+ ixgbe_aci_opc_clear_port_alt_write = 0x0906,
+
+ ixgbe_aci_opc_temp_tca_event = 0x0C94,
+
+ /* debug commands */
+ ixgbe_aci_opc_debug_dump_internals = 0xFF08,
+
+ /* SystemDiagnostic commands */
+ ixgbe_aci_opc_set_health_status_config = 0xFF20,
+ ixgbe_aci_opc_get_supported_health_status_codes = 0xFF21,
+ ixgbe_aci_opc_get_health_status = 0xFF22,
+ ixgbe_aci_opc_clear_health_status = 0xFF23,
+
+ /* FW Logging Commands */
+ ixgbe_aci_opc_fw_logs_config = 0xFF30,
+ ixgbe_aci_opc_fw_logs_register = 0xFF31,
+ ixgbe_aci_opc_fw_logs_query = 0xFF32,
+ ixgbe_aci_opc_fw_logs_event = 0xFF33,
+ ixgbe_aci_opc_fw_logs_get = 0xFF34,
+ ixgbe_aci_opc_fw_logs_clear = 0xFF35
+};
+
+/* This macro is used to generate a compilation error if a structure
+ * is not exactly the correct length. It gives a divide by zero error if the
+ * structure is not of the correct size, otherwise it creates an enum that is
+ * never used.
+ */
+#define IXGBE_CHECK_STRUCT_LEN(n, X) enum ixgbe_static_assert_enum_##X \
+ { ixgbe_static_assert_##X = (n) / ((sizeof(struct X) == (n)) ? 1 : 0) }
+
+/* This macro is used to generate a compilation error if a variable-length
+ * structure is not exactly the correct length assuming a single element of
+ * the variable-length object as the last element of the structure. It gives
+ * a divide by zero error if the structure is not of the correct size,
+ * otherwise it creates an enum that is never used.
+ */
+#define IXGBE_CHECK_VAR_LEN_STRUCT_LEN(n, X, T) enum ixgbe_static_assert_enum_##X \
+ { ixgbe_static_assert_##X = (n) / \
+ (((sizeof(struct X) + sizeof(T)) == (n)) ? 1 : 0) }
+
+/* This macro is used to ensure that parameter structures (i.e. structures
+ * in the params union member of struct ixgbe_aci_desc) are 16 bytes in length.
+ *
+ * NOT intended to be used to check the size of an indirect command/response
+ * additional data buffer (e.g. struct foo) which should just happen to be 16
+ * bytes (instead, use IXGBE_CHECK_STRUCT_LEN(16, foo) for that).
+ */
+#define IXGBE_CHECK_PARAM_LEN(X) IXGBE_CHECK_STRUCT_LEN(16, X)
+
+struct ixgbe_aci_cmd_generic {
+ __le32 param0;
+ __le32 param1;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_generic);
+
+/* Get version (direct 0x0001) */
+struct ixgbe_aci_cmd_get_ver {
+ __le32 rom_ver;
+ __le32 fw_build;
+ u8 fw_branch;
+ u8 fw_major;
+ u8 fw_minor;
+ u8 fw_patch;
+ u8 api_branch;
+ u8 api_major;
+ u8 api_minor;
+ u8 api_patch;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_ver);
+
+#define IXGBE_DRV_VER_STR_LEN_E610 32
+
+struct ixgbe_driver_ver {
+ u8 major_ver;
+ u8 minor_ver;
+ u8 build_ver;
+ u8 subbuild_ver;
+ u8 driver_string[IXGBE_DRV_VER_STR_LEN_E610];
+};
+
+/* Send driver version (indirect 0x0002) */
+struct ixgbe_aci_cmd_driver_ver {
+ u8 major_ver;
+ u8 minor_ver;
+ u8 build_ver;
+ u8 subbuild_ver;
+ u8 reserved[4];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_driver_ver);
+
+/* Get Expanded Error Code (0x0005, direct) */
+struct ixgbe_aci_cmd_get_exp_err {
+ __le32 reason;
+#define IXGBE_ACI_EXPANDED_ERROR_NOT_PROVIDED 0xFFFFFFFF
+ __le32 identifier;
+ u8 rsvd[8];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_exp_err);
+
+/* FW update timeout definitions are in milliseconds */
+#define IXGBE_NVM_TIMEOUT 180000
+#define IXGBE_CHANGE_LOCK_TIMEOUT 1000
+#define IXGBE_GLOBAL_CFG_LOCK_TIMEOUT 3000
+
+enum ixgbe_aci_res_access_type {
+ IXGBE_RES_READ = 1,
+ IXGBE_RES_WRITE
+};
+
+enum ixgbe_aci_res_ids {
+ IXGBE_NVM_RES_ID = 1,
+ IXGBE_SPD_RES_ID,
+ IXGBE_CHANGE_LOCK_RES_ID,
+ IXGBE_GLOBAL_CFG_LOCK_RES_ID
+};
+
+/* Request resource ownership (direct 0x0008)
+ * Release resource ownership (direct 0x0009)
+ */
+struct ixgbe_aci_cmd_req_res {
+ __le16 res_id;
+#define IXGBE_ACI_RES_ID_NVM 1
+#define IXGBE_ACI_RES_ID_SDP 2
+#define IXGBE_ACI_RES_ID_CHNG_LOCK 3
+#define IXGBE_ACI_RES_ID_GLBL_LOCK 4
+ __le16 access_type;
+#define IXGBE_ACI_RES_ACCESS_READ 1
+#define IXGBE_ACI_RES_ACCESS_WRITE 2
+
+ /* Upon successful completion, FW writes this value and driver is
+ * expected to release resource before timeout. This value is provided
+ * in milliseconds.
+ */
+ __le32 timeout;
+#define IXGBE_ACI_RES_NVM_READ_DFLT_TIMEOUT_MS 3000
+#define IXGBE_ACI_RES_NVM_WRITE_DFLT_TIMEOUT_MS 180000
+#define IXGBE_ACI_RES_CHNG_LOCK_DFLT_TIMEOUT_MS 1000
+#define IXGBE_ACI_RES_GLBL_LOCK_DFLT_TIMEOUT_MS 3000
+ /* For SDP: pin ID of the SDP */
+ __le32 res_number;
+ /* Status is only used for IXGBE_ACI_RES_ID_GLBL_LOCK */
+ __le16 status;
+#define IXGBE_ACI_RES_GLBL_SUCCESS 0
+#define IXGBE_ACI_RES_GLBL_IN_PROG 1
+#define IXGBE_ACI_RES_GLBL_DONE 2
+ u8 reserved[2];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_req_res);
+
+/* Get function capabilities (indirect 0x000A)
+ * Get device capabilities (indirect 0x000B)
+ */
+struct ixgbe_aci_cmd_list_caps {
+ u8 cmd_flags;
+ u8 pf_index;
+ u8 reserved[2];
+ __le32 count;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_list_caps);
+
+/* Device/Function buffer entry, repeated per reported capability */
+struct ixgbe_aci_cmd_list_caps_elem {
+ __le16 cap;
+#define IXGBE_ACI_CAPS_VALID_FUNCTIONS 0x0005
+#define IXGBE_ACI_MAX_VALID_FUNCTIONS 0x8
+#define IXGBE_ACI_CAPS_SRIOV 0x0012
+#define IXGBE_ACI_CAPS_VF 0x0013
+#define IXGBE_ACI_CAPS_VMDQ 0x0014
+#define IXGBE_ACI_CAPS_VSI 0x0017
+#define IXGBE_ACI_CAPS_DCB 0x0018
+#define IXGBE_ACI_CAPS_RSS 0x0040
+#define IXGBE_ACI_CAPS_RXQS 0x0041
+#define IXGBE_ACI_CAPS_TXQS 0x0042
+#define IXGBE_ACI_CAPS_MSIX 0x0043
+#define IXGBE_ACI_CAPS_FD 0x0045
+#define IXGBE_ACI_CAPS_MAX_MTU 0x0047
+#define IXGBE_ACI_CAPS_NVM_VER 0x0048
+#define IXGBE_ACI_CAPS_INLINE_IPSEC 0x0070
+#define IXGBE_ACI_CAPS_NUM_ENABLED_PORTS 0x0072
+#define IXGBE_ACI_CAPS_PCIE_RESET_AVOIDANCE 0x0076
+#define IXGBE_ACI_CAPS_POST_UPDATE_RESET_RESTRICT 0x0077
+#define IXGBE_ACI_CAPS_NVM_MGMT 0x0080
+#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG0 0x0081
+#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG1 0x0082
+#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG2 0x0083
+#define IXGBE_ACI_CAPS_EXT_TOPO_DEV_IMG3 0x0084
+#define IXGBE_ACI_CAPS_OROM_RECOVERY_UPDATE 0x0090
+#define IXGBE_ACI_CAPS_NEXT_CLUSTER_ID 0x0096
+ u8 major_ver;
+ u8 minor_ver;
+ /* Number of resources described by this capability */
+ __le32 number;
+ /* Only meaningful for some types of resources */
+ __le32 logical_id;
+ /* Only meaningful for some types of resources */
+ __le32 phys_id;
+ __le64 rsvd1;
+ __le64 rsvd2;
+};
+
+IXGBE_CHECK_STRUCT_LEN(32, ixgbe_aci_cmd_list_caps_elem);
+
+/* Disable RXEN (direct 0x000C) */
+struct ixgbe_aci_cmd_disable_rxen {
+ u8 lport_num;
+ u8 reserved[15];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_disable_rxen);
+
+/* Get FW Event (indirect 0x0014) */
+struct ixgbe_aci_cmd_get_fw_event {
+ __le16 fw_buf_status;
+#define IXGBE_ACI_GET_FW_EVENT_STATUS_OBTAINED BIT(0)
+#define IXGBE_ACI_GET_FW_EVENT_STATUS_PENDING BIT(1)
+ u8 rsvd[14];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_fw_event);
+
+/* Get PHY capabilities (indirect 0x0600) */
+struct ixgbe_aci_cmd_get_phy_caps {
+ u8 lport_num;
+ u8 reserved;
+ __le16 param0;
+ /* 18.0 - Report qualified modules */
+#define IXGBE_ACI_GET_PHY_RQM BIT(0)
+ /* 18.1 - 18.3 : Report mode
+ * 000b - Report topology capabilities, without media
+ * 001b - Report topology capabilities, with media
+ * 010b - Report Active configuration
+ * 011b - Report PHY Type and FEC mode capabilities
+ * 100b - Report Default capabilities
+ */
+#define IXGBE_ACI_REPORT_MODE_S 1
+#define IXGBE_ACI_REPORT_MODE_M (7 << IXGBE_ACI_REPORT_MODE_S)
+#define IXGBE_ACI_REPORT_TOPO_CAP_NO_MEDIA 0
+#define IXGBE_ACI_REPORT_TOPO_CAP_MEDIA BIT(1)
+#define IXGBE_ACI_REPORT_ACTIVE_CFG BIT(2)
+#define IXGBE_ACI_REPORT_DFLT_CFG BIT(3)
+ __le32 reserved1;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_phy_caps);
+
+/* This is #define of PHY type (Extended):
+ * The first set of defines is for phy_type_low.
+ */
+#define IXGBE_PHY_TYPE_LOW_100BASE_TX BIT_ULL(0)
+#define IXGBE_PHY_TYPE_LOW_100M_SGMII BIT_ULL(1)
+#define IXGBE_PHY_TYPE_LOW_1000BASE_T BIT_ULL(2)
+#define IXGBE_PHY_TYPE_LOW_1000BASE_SX BIT_ULL(3)
+#define IXGBE_PHY_TYPE_LOW_1000BASE_LX BIT_ULL(4)
+#define IXGBE_PHY_TYPE_LOW_1000BASE_KX BIT_ULL(5)
+#define IXGBE_PHY_TYPE_LOW_1G_SGMII BIT_ULL(6)
+#define IXGBE_PHY_TYPE_LOW_2500BASE_T BIT_ULL(7)
+#define IXGBE_PHY_TYPE_LOW_2500BASE_X BIT_ULL(8)
+#define IXGBE_PHY_TYPE_LOW_2500BASE_KX BIT_ULL(9)
+#define IXGBE_PHY_TYPE_LOW_5GBASE_T BIT_ULL(10)
+#define IXGBE_PHY_TYPE_LOW_5GBASE_KR BIT_ULL(11)
+#define IXGBE_PHY_TYPE_LOW_10GBASE_T BIT_ULL(12)
+#define IXGBE_PHY_TYPE_LOW_10G_SFI_DA BIT_ULL(13)
+#define IXGBE_PHY_TYPE_LOW_10GBASE_SR BIT_ULL(14)
+#define IXGBE_PHY_TYPE_LOW_10GBASE_LR BIT_ULL(15)
+#define IXGBE_PHY_TYPE_LOW_10GBASE_KR_CR1 BIT_ULL(16)
+#define IXGBE_PHY_TYPE_LOW_10G_SFI_AOC_ACC BIT_ULL(17)
+#define IXGBE_PHY_TYPE_LOW_10G_SFI_C2C BIT_ULL(18)
+#define IXGBE_PHY_TYPE_LOW_MAX_INDEX 18
+/* The second set of defines is for phy_type_high. */
+#define IXGBE_PHY_TYPE_HIGH_10BASE_T BIT_ULL(1)
+#define IXGBE_PHY_TYPE_HIGH_10M_SGMII BIT_ULL(2)
+#define IXGBE_PHY_TYPE_HIGH_2500M_SGMII BIT_ULL(56)
+#define IXGBE_PHY_TYPE_HIGH_100M_USXGMII BIT_ULL(57)
+#define IXGBE_PHY_TYPE_HIGH_1G_USXGMII BIT_ULL(58)
+#define IXGBE_PHY_TYPE_HIGH_2500M_USXGMII BIT_ULL(59)
+#define IXGBE_PHY_TYPE_HIGH_5G_USXGMII BIT_ULL(60)
+#define IXGBE_PHY_TYPE_HIGH_10G_USXGMII BIT_ULL(61)
+#define IXGBE_PHY_TYPE_HIGH_MAX_INDEX 61
+
+struct ixgbe_aci_cmd_get_phy_caps_data {
+ __le64 phy_type_low; /* Use values from IXGBE_PHY_TYPE_LOW_* */
+ __le64 phy_type_high; /* Use values from IXGBE_PHY_TYPE_HIGH_* */
+ u8 caps;
+#define IXGBE_ACI_PHY_EN_TX_LINK_PAUSE BIT(0)
+#define IXGBE_ACI_PHY_EN_RX_LINK_PAUSE BIT(1)
+#define IXGBE_ACI_PHY_LOW_POWER_MODE BIT(2)
+#define IXGBE_ACI_PHY_EN_LINK BIT(3)
+#define IXGBE_ACI_PHY_AN_MODE BIT(4)
+#define IXGBE_ACI_PHY_EN_MOD_QUAL BIT(5)
+#define IXGBE_ACI_PHY_EN_LESM BIT(6)
+#define IXGBE_ACI_PHY_EN_AUTO_FEC BIT(7)
+#define IXGBE_ACI_PHY_CAPS_MASK MAKEMASK(0xff, 0)
+ u8 low_power_ctrl_an;
+#define IXGBE_ACI_PHY_EN_D3COLD_LOW_POWER_AUTONEG BIT(0)
+#define IXGBE_ACI_PHY_AN_EN_CLAUSE28 BIT(1)
+#define IXGBE_ACI_PHY_AN_EN_CLAUSE73 BIT(2)
+#define IXGBE_ACI_PHY_AN_EN_CLAUSE37 BIT(3)
+ __le16 eee_cap;
+#define IXGBE_ACI_PHY_EEE_EN_100BASE_TX BIT(0)
+#define IXGBE_ACI_PHY_EEE_EN_1000BASE_T BIT(1)
+#define IXGBE_ACI_PHY_EEE_EN_10GBASE_T BIT(2)
+#define IXGBE_ACI_PHY_EEE_EN_1000BASE_KX BIT(3)
+#define IXGBE_ACI_PHY_EEE_EN_10GBASE_KR BIT(4)
+#define IXGBE_ACI_PHY_EEE_EN_25GBASE_KR BIT(5)
+#define IXGBE_ACI_PHY_EEE_EN_10BASE_T BIT(11)
+ __le16 eeer_value;
+ u8 phy_id_oui[4]; /* PHY/Module ID connected on the port */
+ u8 phy_fw_ver[8];
+ u8 link_fec_options;
+#define IXGBE_ACI_PHY_FEC_10G_KR_40G_KR4_EN BIT(0)
+#define IXGBE_ACI_PHY_FEC_10G_KR_40G_KR4_REQ BIT(1)
+#define IXGBE_ACI_PHY_FEC_25G_RS_528_REQ BIT(2)
+#define IXGBE_ACI_PHY_FEC_25G_KR_REQ BIT(3)
+#define IXGBE_ACI_PHY_FEC_25G_RS_544_REQ BIT(4)
+#define IXGBE_ACI_PHY_FEC_25G_RS_CLAUSE91_EN BIT(6)
+#define IXGBE_ACI_PHY_FEC_25G_KR_CLAUSE74_EN BIT(7)
+#define IXGBE_ACI_PHY_FEC_MASK MAKEMASK(0xdf, 0)
+ u8 module_compliance_enforcement;
+#define IXGBE_ACI_MOD_ENFORCE_STRICT_MODE BIT(0)
+ u8 extended_compliance_code;
+#define IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE 3
+ u8 module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE];
+#define IXGBE_ACI_MOD_TYPE_BYTE0_SFP_PLUS 0xA0
+#define IXGBE_ACI_MOD_TYPE_BYTE0_QSFP_PLUS 0x80
+#define IXGBE_ACI_MOD_TYPE_IDENT 1
+#define IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_PASSIVE BIT(0)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_SFP_PLUS_CU_ACTIVE BIT(1)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_SR BIT(4)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_LR BIT(5)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_LRM BIT(6)
+#define IXGBE_ACI_MOD_TYPE_BYTE1_10G_BASE_ER BIT(7)
+#define IXGBE_ACI_MOD_TYPE_BYTE2_SFP_PLUS 0xA0
+#define IXGBE_ACI_MOD_TYPE_BYTE2_QSFP_PLUS 0x86
+ u8 qualified_module_count;
+ u8 rsvd2[7]; /* Bytes 47:41 reserved */
+#define IXGBE_ACI_QUAL_MOD_COUNT_MAX 16
+ struct {
+ u8 v_oui[3];
+ u8 rsvd3;
+ u8 v_part[16];
+ __le32 v_rev;
+ __le64 rsvd4;
+ } qual_modules[IXGBE_ACI_QUAL_MOD_COUNT_MAX];
+};
+
+IXGBE_CHECK_STRUCT_LEN(560, ixgbe_aci_cmd_get_phy_caps_data);
+
+/* Set PHY capabilities (direct 0x0601)
+ * NOTE: This command must be followed by setup link and restart auto-neg
+ */
+struct ixgbe_aci_cmd_set_phy_cfg {
+ u8 reserved[8];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_phy_cfg);
+
+/* Set PHY config command data structure */
+struct ixgbe_aci_cmd_set_phy_cfg_data {
+ __le64 phy_type_low; /* Use values from IXGBE_PHY_TYPE_LOW_* */
+ __le64 phy_type_high; /* Use values from IXGBE_PHY_TYPE_HIGH_* */
+ u8 caps;
+#define IXGBE_ACI_PHY_ENA_VALID_MASK MAKEMASK(0xef, 0)
+#define IXGBE_ACI_PHY_ENA_TX_PAUSE_ABILITY BIT(0)
+#define IXGBE_ACI_PHY_ENA_RX_PAUSE_ABILITY BIT(1)
+#define IXGBE_ACI_PHY_ENA_LOW_POWER BIT(2)
+#define IXGBE_ACI_PHY_ENA_LINK BIT(3)
+#define IXGBE_ACI_PHY_ENA_AUTO_LINK_UPDT BIT(5)
+#define IXGBE_ACI_PHY_ENA_LESM BIT(6)
+#define IXGBE_ACI_PHY_ENA_AUTO_FEC BIT(7)
+ u8 low_power_ctrl_an;
+ __le16 eee_cap; /* Value from ixgbe_aci_get_phy_caps */
+ __le16 eeer_value; /* Use defines from ixgbe_aci_get_phy_caps */
+ u8 link_fec_opt; /* Use defines from ixgbe_aci_get_phy_caps */
+ u8 module_compliance_enforcement;
+};
+
+IXGBE_CHECK_STRUCT_LEN(24, ixgbe_aci_cmd_set_phy_cfg_data);
+
+/* Restart AN command data structure (direct 0x0605)
+ * Also used for response, with only the lport_num field present.
+ */
+struct ixgbe_aci_cmd_restart_an {
+ u8 reserved[2];
+ u8 cmd_flags;
+#define IXGBE_ACI_RESTART_AN_LINK_RESTART BIT(1)
+#define IXGBE_ACI_RESTART_AN_LINK_ENABLE BIT(2)
+ u8 reserved2[13];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_restart_an);
+
+#pragma pack(1)
+/* Get link status (indirect 0x0607), also used for Link Status Event */
+struct ixgbe_aci_cmd_get_link_status {
+ u8 reserved[2];
+ u8 cmd_flags;
+#define IXGBE_ACI_LSE_M 0x3
+#define IXGBE_ACI_LSE_NOP 0x0
+#define IXGBE_ACI_LSE_DIS 0x2
+#define IXGBE_ACI_LSE_ENA 0x3
+ /* only response uses this flag */
+#define IXGBE_ACI_LSE_IS_ENABLED 0x1
+ u8 reserved2[5];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_link_status);
+
+/* Get link status response data structure, also used for Link Status Event */
+struct ixgbe_aci_cmd_get_link_status_data {
+ u8 topo_media_conflict;
+#define IXGBE_ACI_LINK_TOPO_CONFLICT BIT(0)
+#define IXGBE_ACI_LINK_MEDIA_CONFLICT BIT(1)
+#define IXGBE_ACI_LINK_TOPO_CORRUPT BIT(2)
+#define IXGBE_ACI_LINK_TOPO_UNREACH_PRT BIT(4)
+#define IXGBE_ACI_LINK_TOPO_UNDRUTIL_PRT BIT(5)
+#define IXGBE_ACI_LINK_TOPO_UNDRUTIL_MEDIA BIT(6)
+#define IXGBE_ACI_LINK_TOPO_UNSUPP_MEDIA BIT(7)
+ u8 link_cfg_err;
+#define IXGBE_ACI_LINK_CFG_ERR BIT(0)
+#define IXGBE_ACI_LINK_CFG_COMPLETED BIT(1)
+#define IXGBE_ACI_LINK_ACT_PORT_OPT_INVAL BIT(2)
+#define IXGBE_ACI_LINK_FEAT_ID_OR_CONFIG_ID_INVAL BIT(3)
+#define IXGBE_ACI_LINK_TOPO_CRITICAL_SDP_ERR BIT(4)
+#define IXGBE_ACI_LINK_MODULE_POWER_UNSUPPORTED BIT(5)
+#define IXGBE_ACI_LINK_EXTERNAL_PHY_LOAD_FAILURE BIT(6)
+#define IXGBE_ACI_LINK_INVAL_MAX_POWER_LIMIT BIT(7)
+ u8 link_info;
+#define IXGBE_ACI_LINK_UP BIT(0) /* Link Status */
+#define IXGBE_ACI_LINK_FAULT BIT(1)
+#define IXGBE_ACI_LINK_FAULT_TX BIT(2)
+#define IXGBE_ACI_LINK_FAULT_RX BIT(3)
+#define IXGBE_ACI_LINK_FAULT_REMOTE BIT(4)
+#define IXGBE_ACI_LINK_UP_PORT BIT(5) /* External Port Link Status */
+#define IXGBE_ACI_MEDIA_AVAILABLE BIT(6)
+#define IXGBE_ACI_SIGNAL_DETECT BIT(7)
+ u8 an_info;
+#define IXGBE_ACI_AN_COMPLETED BIT(0)
+#define IXGBE_ACI_LP_AN_ABILITY BIT(1)
+#define IXGBE_ACI_PD_FAULT BIT(2) /* Parallel Detection Fault */
+#define IXGBE_ACI_FEC_EN BIT(3)
+#define IXGBE_ACI_PHY_LOW_POWER BIT(4) /* Low Power State */
+#define IXGBE_ACI_LINK_PAUSE_TX BIT(5)
+#define IXGBE_ACI_LINK_PAUSE_RX BIT(6)
+#define IXGBE_ACI_QUALIFIED_MODULE BIT(7)
+ u8 ext_info;
+#define IXGBE_ACI_LINK_PHY_TEMP_ALARM BIT(0)
+#define IXGBE_ACI_LINK_EXCESSIVE_ERRORS BIT(1) /* Excessive Link Errors */
+ /* Port Tx Suspended */
+#define IXGBE_ACI_LINK_TX_S 2
+#define IXGBE_ACI_LINK_TX_M (0x03 << IXGBE_ACI_LINK_TX_S)
+#define IXGBE_ACI_LINK_TX_ACTIVE 0
+#define IXGBE_ACI_LINK_TX_DRAINED 1
+#define IXGBE_ACI_LINK_TX_FLUSHED 3
+ u8 lb_status;
+#define IXGBE_ACI_LINK_LB_PHY_LCL BIT(0)
+#define IXGBE_ACI_LINK_LB_PHY_RMT BIT(1)
+#define IXGBE_ACI_LINK_LB_MAC_LCL BIT(2)
+#define IXGBE_ACI_LINK_LB_PHY_IDX_S 3
+#define IXGBE_ACI_LINK_LB_PHY_IDX_M (0x7 << IXGBE_ACI_LB_PHY_IDX_S)
+ __le16 max_frame_size;
+ u8 cfg;
+#define IXGBE_ACI_LINK_25G_KR_FEC_EN BIT(0)
+#define IXGBE_ACI_LINK_25G_RS_528_FEC_EN BIT(1)
+#define IXGBE_ACI_LINK_25G_RS_544_FEC_EN BIT(2)
+#define IXGBE_ACI_FEC_MASK MAKEMASK(0x7, 0)
+ /* Pacing Config */
+#define IXGBE_ACI_CFG_PACING_S 3
+#define IXGBE_ACI_CFG_PACING_M (0xF << IXGBE_ACI_CFG_PACING_S)
+#define IXGBE_ACI_CFG_PACING_TYPE_M BIT(7)
+#define IXGBE_ACI_CFG_PACING_TYPE_AVG 0
+#define IXGBE_ACI_CFG_PACING_TYPE_FIXED IXGBE_ACI_CFG_PACING_TYPE_M
+ /* External Device Power Ability */
+ u8 power_desc;
+#define IXGBE_ACI_PWR_CLASS_M 0x3F
+#define IXGBE_ACI_LINK_PWR_BASET_LOW_HIGH 0
+#define IXGBE_ACI_LINK_PWR_BASET_HIGH 1
+#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_1 0
+#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_2 1
+#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_3 2
+#define IXGBE_ACI_LINK_PWR_QSFP_CLASS_4 3
+ __le16 link_speed;
+#define IXGBE_ACI_LINK_SPEED_M 0x7FF
+#define IXGBE_ACI_LINK_SPEED_10MB BIT(0)
+#define IXGBE_ACI_LINK_SPEED_100MB BIT(1)
+#define IXGBE_ACI_LINK_SPEED_1000MB BIT(2)
+#define IXGBE_ACI_LINK_SPEED_2500MB BIT(3)
+#define IXGBE_ACI_LINK_SPEED_5GB BIT(4)
+#define IXGBE_ACI_LINK_SPEED_10GB BIT(5)
+#define IXGBE_ACI_LINK_SPEED_20GB BIT(6)
+#define IXGBE_ACI_LINK_SPEED_25GB BIT(7)
+#define IXGBE_ACI_LINK_SPEED_40GB BIT(8)
+#define IXGBE_ACI_LINK_SPEED_50GB BIT(9)
+#define IXGBE_ACI_LINK_SPEED_100GB BIT(10)
+#define IXGBE_ACI_LINK_SPEED_200GB BIT(11)
+#define IXGBE_ACI_LINK_SPEED_UNKNOWN BIT(15)
+ __le16 reserved3; /* Aligns next field to 8-byte boundary */
+ u8 ext_fec_status;
+#define IXGBE_ACI_LINK_RS_272_FEC_EN BIT(0) /* RS 272 FEC enabled */
+ u8 reserved4;
+ __le64 phy_type_low; /* Use values from IXGBE_PHY_TYPE_LOW_* */
+ __le64 phy_type_high; /* Use values from IXGBE_PHY_TYPE_HIGH_* */
+ /* Get link status version 2 link partner data */
+ __le64 lp_phy_type_low; /* Use values from IXGBE_PHY_TYPE_LOW_* */
+ __le64 lp_phy_type_high; /* Use values from IXGBE_PHY_TYPE_HIGH_* */
+ u8 lp_fec_adv;
+#define IXGBE_ACI_LINK_LP_10G_KR_FEC_CAP BIT(0)
+#define IXGBE_ACI_LINK_LP_25G_KR_FEC_CAP BIT(1)
+#define IXGBE_ACI_LINK_LP_RS_528_FEC_CAP BIT(2)
+#define IXGBE_ACI_LINK_LP_50G_KR_272_FEC_CAP BIT(3)
+#define IXGBE_ACI_LINK_LP_100G_KR_272_FEC_CAP BIT(4)
+#define IXGBE_ACI_LINK_LP_200G_KR_272_FEC_CAP BIT(5)
+ u8 lp_fec_req;
+#define IXGBE_ACI_LINK_LP_10G_KR_FEC_REQ BIT(0)
+#define IXGBE_ACI_LINK_LP_25G_KR_FEC_REQ BIT(1)
+#define IXGBE_ACI_LINK_LP_RS_528_FEC_REQ BIT(2)
+#define IXGBE_ACI_LINK_LP_KR_272_FEC_REQ BIT(3)
+ u8 lp_flowcontrol;
+#define IXGBE_ACI_LINK_LP_PAUSE_ADV BIT(0)
+#define IXGBE_ACI_LINK_LP_ASM_DIR_ADV BIT(1)
+ u8 reserved5[5];
+};
+#pragma pack()
+
+IXGBE_CHECK_STRUCT_LEN(56, ixgbe_aci_cmd_get_link_status_data);
+
+/* Set event mask command (direct 0x0613) */
+struct ixgbe_aci_cmd_set_event_mask {
+ u8 reserved[8];
+ __le16 event_mask;
+#define IXGBE_ACI_LINK_EVENT_UPDOWN BIT(1)
+#define IXGBE_ACI_LINK_EVENT_MEDIA_NA BIT(2)
+#define IXGBE_ACI_LINK_EVENT_LINK_FAULT BIT(3)
+#define IXGBE_ACI_LINK_EVENT_PHY_TEMP_ALARM BIT(4)
+#define IXGBE_ACI_LINK_EVENT_EXCESSIVE_ERRORS BIT(5)
+#define IXGBE_ACI_LINK_EVENT_SIGNAL_DETECT BIT(6)
+#define IXGBE_ACI_LINK_EVENT_AN_COMPLETED BIT(7)
+#define IXGBE_ACI_LINK_EVENT_MODULE_QUAL_FAIL BIT(8)
+#define IXGBE_ACI_LINK_EVENT_PORT_TX_SUSPENDED BIT(9)
+#define IXGBE_ACI_LINK_EVENT_TOPO_CONFLICT BIT(10)
+#define IXGBE_ACI_LINK_EVENT_MEDIA_CONFLICT BIT(11)
+#define IXGBE_ACI_LINK_EVENT_PHY_FW_LOAD_FAIL BIT(12)
+ u8 reserved1[6];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_event_mask);
+
+struct ixgbe_aci_cmd_link_topo_params {
+ u8 lport_num;
+ u8 lport_num_valid;
+#define IXGBE_ACI_LINK_TOPO_PORT_NUM_VALID BIT(0)
+ u8 node_type_ctx;
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_S 0
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_M (0xF << IXGBE_ACI_LINK_TOPO_NODE_TYPE_S)
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_PHY 0
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_GPIO_CTRL 1
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_MUX_CTRL 2
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_LED_CTRL 3
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_LED 4
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_THERMAL 5
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_CAGE 6
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_MEZZ 7
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_ID_EEPROM 8
+#define IXGBE_ACI_LINK_TOPO_NODE_TYPE_GPS 11
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_S 4
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_M \
+ (0xF << IXGBE_ACI_LINK_TOPO_NODE_CTX_S)
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_GLOBAL 0
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_BOARD 1
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_PORT 2
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE 3
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE_HANDLE 4
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_DIRECT_BUS_ACCESS 5
+#define IXGBE_ACI_LINK_TOPO_NODE_CTX_NODE_HANDLE_BUS_ADDRESS 6
+ u8 index;
+};
+
+IXGBE_CHECK_STRUCT_LEN(4, ixgbe_aci_cmd_link_topo_params);
+
+struct ixgbe_aci_cmd_link_topo_addr {
+ struct ixgbe_aci_cmd_link_topo_params topo_params;
+ __le16 handle;
+#define IXGBE_ACI_LINK_TOPO_HANDLE_S 0
+#define IXGBE_ACI_LINK_TOPO_HANDLE_M (0x3FF << IXGBE_ACI_LINK_TOPO_HANDLE_S)
+/* Used to decode the handle field */
+#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_M BIT(9)
+#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_LOM BIT(9)
+#define IXGBE_ACI_LINK_TOPO_HANDLE_BRD_TYPE_MEZZ 0
+#define IXGBE_ACI_LINK_TOPO_HANDLE_NODE_S 0
+/* In case of a Mezzanine type */
+#define IXGBE_ACI_LINK_TOPO_HANDLE_MEZZ_NODE_M \
+ (0x3F << IXGBE_ACI_LINK_TOPO_HANDLE_NODE_S)
+#define IXGBE_ACI_LINK_TOPO_HANDLE_MEZZ_S 6
+#define IXGBE_ACI_LINK_TOPO_HANDLE_MEZZ_M \
+ (0x7 << IXGBE_ACI_LINK_TOPO_HANDLE_MEZZ_S)
+/* In case of a LOM type */
+#define IXGBE_ACI_LINK_TOPO_HANDLE_LOM_NODE_M \
+ (0x1FF << IXGBE_ACI_LINK_TOPO_HANDLE_NODE_S)
+};
+
+IXGBE_CHECK_STRUCT_LEN(6, ixgbe_aci_cmd_link_topo_addr);
+
+/* Get Link Topology Handle (direct, 0x06E0) */
+struct ixgbe_aci_cmd_get_link_topo {
+ struct ixgbe_aci_cmd_link_topo_addr addr;
+ u8 node_part_num;
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_PCA9575 0x21
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_GEN_GPS 0x48
+#define IXGBE_ACI_GET_LINK_TOPO_NODE_NR_E610_PTC 0x49
+ u8 rsvd[9];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_link_topo);
+
+/* Read/Write I2C (direct, 0x06E2/0x06E3) */
+struct ixgbe_aci_cmd_i2c {
+ struct ixgbe_aci_cmd_link_topo_addr topo_addr;
+ __le16 i2c_addr;
+ u8 i2c_params;
+#define IXGBE_ACI_I2C_DATA_SIZE_S 0
+#define IXGBE_ACI_I2C_DATA_SIZE_M (0xF << IXGBE_ACI_I2C_DATA_SIZE_S)
+#define IXGBE_ACI_I2C_ADDR_TYPE_M BIT(4)
+#define IXGBE_ACI_I2C_ADDR_TYPE_7BIT 0
+#define IXGBE_ACI_I2C_ADDR_TYPE_10BIT IXGBE_ACI_I2C_ADDR_TYPE_M
+#define IXGBE_ACI_I2C_DATA_OFFSET_S 5
+#define IXGBE_ACI_I2C_DATA_OFFSET_M (0x3 << IXGBE_ACI_I2C_DATA_OFFSET_S)
+#define IXGBE_ACI_I2C_USE_REPEATED_START BIT(7)
+ u8 rsvd;
+ __le16 i2c_bus_addr;
+#define IXGBE_ACI_I2C_ADDR_7BIT_MASK 0x7F
+#define IXGBE_ACI_I2C_ADDR_10BIT_MASK 0x3FF
+ u8 i2c_data[4]; /* Used only by write command, reserved in read. */
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_i2c);
+
+/* Read I2C Response (direct, 0x06E2) */
+struct ixgbe_aci_cmd_read_i2c_resp {
+ u8 i2c_data[16];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_read_i2c_resp);
+
+/* Read/Write MDIO (direct, 0x06E4/0x06E5) */
+struct ixgbe_aci_cmd_mdio {
+ struct ixgbe_aci_cmd_link_topo_addr topo_addr;
+ u8 mdio_device_addr;
+#define IXGBE_ACI_MDIO_DEV_S 0
+#define IXGBE_ACI_MDIO_DEV_M (0x1F << IXGBE_ACI_MDIO_DEV_S)
+#define IXGBE_ACI_MDIO_CLAUSE_22 BIT(5)
+#define IXGBE_ACI_MDIO_CLAUSE_45 BIT(6)
+ u8 mdio_bus_address;
+#define IXGBE_ACI_MDIO_BUS_ADDR_S 0
+#define IXGBE_ACI_MDIO_BUS_ADDR_M (0x1F << IXGBE_ACI_MDIO_BUS_ADDR_S)
+ __le16 offset;
+ __le16 data; /* Input in write cmd, output in read cmd. */
+ u8 rsvd1[4];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_mdio);
+
+/* Set/Get GPIO By Function (direct, 0x06E6/0x06E7) */
+struct ixgbe_aci_cmd_gpio_by_func {
+ struct ixgbe_aci_cmd_link_topo_addr topo_addr;
+ u8 io_func_num;
+#define IXGBE_ACI_GPIO_FUNC_S 0
+#define IXGBE_ACI_GPIO_FUNC_M (0x1F << IXGBE_ACI_GPIO_IO_FUNC_NUM_S)
+ u8 io_value; /* Input in write cmd, output in read cmd. */
+#define IXGBE_ACI_GPIO_ON BIT(0)
+#define IXGBE_ACI_GPIO_OFF 0
+ u8 rsvd[8];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_gpio_by_func);
+
+/* Set Port Identification LED (direct, 0x06E9) */
+struct ixgbe_aci_cmd_set_port_id_led {
+ u8 lport_num;
+ u8 lport_num_valid;
+#define IXGBE_ACI_PORT_ID_PORT_NUM_VALID BIT(0)
+ u8 ident_mode;
+#define IXGBE_ACI_PORT_IDENT_LED_BLINK BIT(0)
+#define IXGBE_ACI_PORT_IDENT_LED_ORIG 0
+ u8 rsvd[13];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_port_id_led);
+
+/* Set/Get GPIO (direct, 0x06EC/0x06ED) */
+struct ixgbe_aci_cmd_gpio {
+ __le16 gpio_ctrl_handle;
+#define IXGBE_ACI_GPIO_HANDLE_S 0
+#define IXGBE_ACI_GPIO_HANDLE_M (0x3FF << IXGBE_ACI_GPIO_HANDLE_S)
+ u8 gpio_num;
+ u8 gpio_val;
+ u8 rsvd[12];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_gpio);
+
+/* Read/Write SFF EEPROM command (indirect 0x06EE) */
+struct ixgbe_aci_cmd_sff_eeprom {
+ u8 lport_num;
+ u8 lport_num_valid;
+#define IXGBE_ACI_SFF_PORT_NUM_VALID BIT(0)
+ __le16 i2c_bus_addr;
+#define IXGBE_ACI_SFF_I2CBUS_7BIT_M 0x7F
+#define IXGBE_ACI_SFF_I2CBUS_10BIT_M 0x3FF
+#define IXGBE_ACI_SFF_I2CBUS_TYPE_M BIT(10)
+#define IXGBE_ACI_SFF_I2CBUS_TYPE_7BIT 0
+#define IXGBE_ACI_SFF_I2CBUS_TYPE_10BIT IXGBE_ACI_SFF_I2CBUS_TYPE_M
+#define IXGBE_ACI_SFF_PAGE_BANK_CTRL_S 11
+#define IXGBE_ACI_SFF_PAGE_BANK_CTRL_M (0x3 << IXGBE_ACI_SFF_PAGE_BANK_CTRL_S)
+#define IXGBE_ACI_SFF_NO_PAGE_BANK_UPDATE 0
+#define IXGBE_ACI_SFF_UPDATE_PAGE 1
+#define IXGBE_ACI_SFF_UPDATE_BANK 2
+#define IXGBE_ACI_SFF_UPDATE_PAGE_BANK 3
+#define IXGBE_ACI_SFF_IS_WRITE BIT(15)
+ __le16 i2c_offset;
+ u8 module_bank;
+ u8 module_page;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_sff_eeprom);
+
+/* Program Topology Device NVM (direct, 0x06F2) */
+struct ixgbe_aci_cmd_prog_topo_dev_nvm {
+ struct ixgbe_aci_cmd_link_topo_params topo_params;
+ u8 rsvd[12];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_prog_topo_dev_nvm);
+
+/* Read Topology Device NVM (direct, 0x06F3) */
+struct ixgbe_aci_cmd_read_topo_dev_nvm {
+ struct ixgbe_aci_cmd_link_topo_params topo_params;
+ __le32 start_address;
+#define IXGBE_ACI_READ_TOPO_DEV_NVM_DATA_READ_SIZE 8
+ u8 data_read[IXGBE_ACI_READ_TOPO_DEV_NVM_DATA_READ_SIZE];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_read_topo_dev_nvm);
+
+/* NVM Read command (indirect 0x0701)
+ * NVM Erase commands (direct 0x0702)
+ * NVM Write commands (indirect 0x0703)
+ * NVM Write Activate commands (direct 0x0707)
+ * NVM Shadow RAM Dump commands (direct 0x0707)
+ */
+struct ixgbe_aci_cmd_nvm {
+#define IXGBE_ACI_NVM_MAX_OFFSET 0xFFFFFF
+ __le16 offset_low;
+ u8 offset_high; /* For Write Activate offset_high is used as flags2 */
+ u8 cmd_flags;
+#define IXGBE_ACI_NVM_LAST_CMD BIT(0)
+#define IXGBE_ACI_NVM_PCIR_REQ BIT(0) /* Used by NVM Write reply */
+#define IXGBE_ACI_NVM_PRESERVATION_S 1 /* Used by NVM Write Activate only */
+#define IXGBE_ACI_NVM_PRESERVATION_M (3 << IXGBE_ACI_NVM_PRESERVATION_S)
+#define IXGBE_ACI_NVM_NO_PRESERVATION (0 << IXGBE_ACI_NVM_PRESERVATION_S)
+#define IXGBE_ACI_NVM_PRESERVE_ALL BIT(1)
+#define IXGBE_ACI_NVM_FACTORY_DEFAULT (2 << IXGBE_ACI_NVM_PRESERVATION_S)
+#define IXGBE_ACI_NVM_PRESERVE_SELECTED (3 << IXGBE_ACI_NVM_PRESERVATION_S)
+#define IXGBE_ACI_NVM_ACTIV_SEL_NVM BIT(3) /* Write Activate/SR Dump only */
+#define IXGBE_ACI_NVM_ACTIV_SEL_OROM BIT(4)
+#define IXGBE_ACI_NVM_ACTIV_SEL_NETLIST BIT(5)
+#define IXGBE_ACI_NVM_SPECIAL_UPDATE BIT(6)
+#define IXGBE_ACI_NVM_REVERT_LAST_ACTIV BIT(6) /* Write Activate only */
+#define IXGBE_ACI_NVM_ACTIV_SEL_MASK MAKEMASK(0x7, 3)
+#define IXGBE_ACI_NVM_FLASH_ONLY BIT(7)
+#define IXGBE_ACI_NVM_RESET_LVL_M MAKEMASK(0x3, 0) /* Write reply only */
+#define IXGBE_ACI_NVM_POR_FLAG 0
+#define IXGBE_ACI_NVM_PERST_FLAG 1
+#define IXGBE_ACI_NVM_EMPR_FLAG 2
+#define IXGBE_ACI_NVM_EMPR_ENA BIT(0) /* Write Activate reply only */
+ /* For Write Activate, several flags are sent as part of a separate
+ * flags2 field using a separate byte. For simplicity of the software
+ * interface, we pass the flags as a 16 bit value so these flags are
+ * all offset by 8 bits
+ */
+#define IXGBE_ACI_NVM_ACTIV_REQ_EMPR BIT(8) /* NVM Write Activate only */
+ __le16 module_typeid;
+ __le16 length;
+#define IXGBE_ACI_NVM_ERASE_LEN 0xFFFF
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+/* NVM Module_Type ID, needed offset and read_len for struct ixgbe_aci_cmd_nvm. */
+#define IXGBE_ACI_NVM_SECTOR_UNIT 4096 /* In Bytes */
+#define IXGBE_ACI_NVM_WORD_UNIT 2 /* In Bytes */
+
+#define IXGBE_ACI_NVM_START_POINT 0
+#define IXGBE_ACI_NVM_EMP_SR_PTR_OFFSET 0x90
+#define IXGBE_ACI_NVM_EMP_SR_PTR_RD_LEN 2 /* In Bytes */
+#define IXGBE_ACI_NVM_EMP_SR_PTR_M MAKEMASK(0x7FFF, 0)
+#define IXGBE_ACI_NVM_EMP_SR_PTR_TYPE_S 15
+#define IXGBE_ACI_NVM_EMP_SR_PTR_TYPE_M BIT(15)
+#define IXGBE_ACI_NVM_EMP_SR_PTR_TYPE_SECTOR 1
+
+#define IXGBE_ACI_NVM_LLDP_CFG_PTR_OFFSET 0x46
+#define IXGBE_ACI_NVM_LLDP_CFG_HEADER_LEN 2 /* In Bytes */
+#define IXGBE_ACI_NVM_LLDP_CFG_PTR_RD_LEN 2 /* In Bytes */
+
+#define IXGBE_ACI_NVM_LLDP_PRESERVED_MOD_ID 0x129
+#define IXGBE_ACI_NVM_CUR_LLDP_PERSIST_RD_OFFSET 2 /* In Bytes */
+#define IXGBE_ACI_NVM_LLDP_STATUS_M MAKEMASK(0xF, 0)
+#define IXGBE_ACI_NVM_LLDP_STATUS_M_LEN 4 /* In Bits */
+#define IXGBE_ACI_NVM_LLDP_STATUS_RD_LEN 4 /* In Bytes */
+
+#define IXGBE_ACI_NVM_MINSREV_MOD_ID 0x130
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_nvm);
+
+/* Used for reading and writing MinSRev using 0x0701 and 0x0703. Note that the
+ * type field is excluded from the section when reading and writing from
+ * a module using the module_typeid field with these AQ commands.
+ */
+struct ixgbe_aci_cmd_nvm_minsrev {
+ __le16 length;
+ __le16 validity;
+#define IXGBE_ACI_NVM_MINSREV_NVM_VALID BIT(0)
+#define IXGBE_ACI_NVM_MINSREV_OROM_VALID BIT(1)
+ __le16 nvm_minsrev_l;
+ __le16 nvm_minsrev_h;
+ __le16 orom_minsrev_l;
+ __le16 orom_minsrev_h;
+};
+
+IXGBE_CHECK_STRUCT_LEN(12, ixgbe_aci_cmd_nvm_minsrev);
+
+/* Used for 0x0704 as well as for 0x0705 commands */
+struct ixgbe_aci_cmd_nvm_cfg {
+ u8 cmd_flags;
+#define IXGBE_ACI_ANVM_MULTIPLE_ELEMS BIT(0)
+#define IXGBE_ACI_ANVM_IMMEDIATE_FIELD BIT(1)
+#define IXGBE_ACI_ANVM_NEW_CFG BIT(2)
+ u8 reserved;
+ __le16 count;
+ __le16 id;
+ u8 reserved1[2];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_nvm_cfg);
+
+struct ixgbe_aci_cmd_nvm_cfg_data {
+ __le16 field_id;
+ __le16 field_options;
+ __le16 field_value;
+};
+
+IXGBE_CHECK_STRUCT_LEN(6, ixgbe_aci_cmd_nvm_cfg_data);
+
+/* NVM Checksum Command (direct, 0x0706) */
+struct ixgbe_aci_cmd_nvm_checksum {
+ u8 flags;
+#define IXGBE_ACI_NVM_CHECKSUM_VERIFY BIT(0)
+#define IXGBE_ACI_NVM_CHECKSUM_RECALC BIT(1)
+ u8 rsvd;
+ __le16 checksum; /* Used only by response */
+#define IXGBE_ACI_NVM_CHECKSUM_CORRECT 0xBABA
+ u8 rsvd2[12];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_nvm_checksum);
+
+/* Used for NVM Sanitization command - 0x070C */
+struct ixgbe_aci_cmd_nvm_sanitization {
+ u8 cmd_flags;
+#define IXGBE_ACI_SANITIZE_REQ_READ 0
+#define IXGBE_ACI_SANITIZE_REQ_OPERATE BIT(0)
+
+#define IXGBE_ACI_SANITIZE_READ_SUBJECT_NVM_BITS 0
+#define IXGBE_ACI_SANITIZE_READ_SUBJECT_NVM_STATE BIT(1)
+#define IXGBE_ACI_SANITIZE_OPERATE_SUBJECT_CLEAR 0
+ u8 values;
+#define IXGBE_ACI_SANITIZE_NVM_BITS_HOST_CLEAN_SUPPORT BIT(0)
+#define IXGBE_ACI_SANITIZE_NVM_BITS_BMC_CLEAN_SUPPORT BIT(2)
+#define IXGBE_ACI_SANITIZE_NVM_STATE_HOST_CLEAN_DONE BIT(0)
+#define IXGBE_ACI_SANITIZE_NVM_STATE_HOST_CLEAN_SUCCESS BIT(1)
+#define IXGBE_ACI_SANITIZE_NVM_STATE_BMC_CLEAN_DONE BIT(2)
+#define IXGBE_ACI_SANITIZE_NVM_STATE_BMC_CLEAN_SUCCESS BIT(3)
+#define IXGBE_ACI_SANITIZE_OPERATE_HOST_CLEAN_DONE BIT(0)
+#define IXGBE_ACI_SANITIZE_OPERATE_HOST_CLEAN_SUCCESS BIT(1)
+#define IXGBE_ACI_SANITIZE_OPERATE_BMC_CLEAN_DONE BIT(2)
+#define IXGBE_ACI_SANITIZE_OPERATE_BMC_CLEAN_SUCCESS BIT(3)
+ u8 reserved[14];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_nvm_sanitization);
+
+/* Write/Read Alternate - Direct (direct 0x0900/0x0902) */
+struct ixgbe_aci_cmd_read_write_alt_direct {
+ __le32 dword0_addr;
+ __le32 dword0_value;
+ __le32 dword1_addr;
+ __le32 dword1_value;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_read_write_alt_direct);
+
+/* Write/Read Alternate - Indirect (indirect 0x0901/0x0903) */
+struct ixgbe_aci_cmd_read_write_alt_indirect {
+ __le32 base_dword_addr;
+ __le32 num_dwords;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_read_write_alt_indirect);
+
+/* Done Alternate Write (direct 0x0904) */
+struct ixgbe_aci_cmd_done_alt_write {
+ u8 flags;
+#define IXGBE_ACI_CMD_UEFI_BIOS_MODE BIT(0)
+#define IXGBE_ACI_RESP_RESET_NEEDED BIT(1)
+ u8 reserved[15];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_done_alt_write);
+
+/* Clear Port Alternate Write (direct 0x0906) */
+struct ixgbe_aci_cmd_clear_port_alt_write {
+ u8 reserved[16];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_clear_port_alt_write);
+
+/* Get CGU abilities command response data structure (indirect 0x0C61) */
+struct ixgbe_aci_cmd_get_cgu_abilities {
+ u8 num_inputs;
+ u8 num_outputs;
+ u8 pps_dpll_idx;
+ u8 synce_dpll_idx;
+ __le32 max_in_freq;
+ __le32 max_in_phase_adj;
+ __le32 max_out_freq;
+ __le32 max_out_phase_adj;
+ u8 cgu_part_num;
+ u8 rsvd[3];
+};
+
+IXGBE_CHECK_STRUCT_LEN(24, ixgbe_aci_cmd_get_cgu_abilities);
+
+#define IXGBE_ACI_NODE_HANDLE_VALID BIT(10)
+#define IXGBE_ACI_NODE_HANDLE MAKEMASK(0x3FF, 0)
+#define IXGBE_ACI_DRIVING_CLK_NUM_SHIFT 10
+#define IXGBE_ACI_DRIVING_CLK_NUM MAKEMASK(0x3F, IXGBE_ACI_DRIVING_CLK_NUM_SHIFT)
+
+/* Set CGU input config (direct 0x0C62) */
+struct ixgbe_aci_cmd_set_cgu_input_config {
+ u8 input_idx;
+ u8 flags1;
+#define IXGBE_ACI_SET_CGU_IN_CFG_FLG1_UPDATE_FREQ BIT(6)
+#define IXGBE_ACI_SET_CGU_IN_CFG_FLG1_UPDATE_DELAY BIT(7)
+ u8 flags2;
+#define IXGBE_ACI_SET_CGU_IN_CFG_FLG2_INPUT_EN BIT(5)
+#define IXGBE_ACI_SET_CGU_IN_CFG_FLG2_ESYNC_EN BIT(6)
+ u8 rsvd;
+ __le32 freq;
+ __le32 phase_delay;
+ u8 rsvd2[2];
+ __le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_cgu_input_config);
+
+/* Get CGU input config response descriptor structure (direct 0x0C63) */
+struct ixgbe_aci_cmd_get_cgu_input_config {
+ u8 input_idx;
+ u8 status;
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_LOS BIT(0)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_SCM_FAIL BIT(1)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_CFM_FAIL BIT(2)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_GST_FAIL BIT(3)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_PFM_FAIL BIT(4)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_ESYNC_FAIL BIT(6)
+#define IXGBE_ACI_GET_CGU_IN_CFG_STATUS_ESYNC_CAP BIT(7)
+ u8 type;
+#define IXGBE_ACI_GET_CGU_IN_CFG_TYPE_READ_ONLY BIT(0)
+#define IXGBE_ACI_GET_CGU_IN_CFG_TYPE_GPS BIT(4)
+#define IXGBE_ACI_GET_CGU_IN_CFG_TYPE_EXTERNAL BIT(5)
+#define IXGBE_ACI_GET_CGU_IN_CFG_TYPE_PHY BIT(6)
+ u8 flags1;
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG1_PHASE_DELAY_SUPP BIT(0)
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG1_1PPS_SUPP BIT(2)
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG1_10MHZ_SUPP BIT(3)
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG1_ANYFREQ BIT(7)
+ __le32 freq;
+ __le32 phase_delay;
+ u8 flags2;
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG2_INPUT_EN BIT(5)
+#define IXGBE_ACI_GET_CGU_IN_CFG_FLG2_ESYNC_EN BIT(6)
+ u8 rsvd[1];
+ __le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_input_config);
+
+/* Set CGU output config (direct 0x0C64) */
+struct ixgbe_aci_cmd_set_cgu_output_config {
+ u8 output_idx;
+ u8 flags;
+#define IXGBE_ACI_SET_CGU_OUT_CFG_OUT_EN BIT(0)
+#define IXGBE_ACI_SET_CGU_OUT_CFG_ESYNC_EN BIT(1)
+#define IXGBE_ACI_SET_CGU_OUT_CFG_UPDATE_FREQ BIT(2)
+#define IXGBE_ACI_SET_CGU_OUT_CFG_UPDATE_PHASE BIT(3)
+#define IXGBE_ACI_SET_CGU_OUT_CFG_UPDATE_SRC_SEL BIT(4)
+ u8 src_sel;
+#define IXGBE_ACI_SET_CGU_OUT_CFG_DPLL_SRC_SEL MAKEMASK(0x1F, 0)
+ u8 rsvd;
+ __le32 freq;
+ __le32 phase_delay;
+ u8 rsvd2[2];
+ __le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_cgu_output_config);
+
+/* Get CGU output config (direct 0x0C65) */
+struct ixgbe_aci_cmd_get_cgu_output_config {
+ u8 output_idx;
+ u8 flags;
+#define IXGBE_ACI_GET_CGU_OUT_CFG_OUT_EN BIT(0)
+#define IXGBE_ACI_GET_CGU_OUT_CFG_ESYNC_EN BIT(1)
+#define IXGBE_ACI_GET_CGU_OUT_CFG_ESYNC_ABILITY BIT(2)
+ u8 src_sel;
+#define IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_SRC_SEL_SHIFT 0
+#define IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_SRC_SEL \
+ MAKEMASK(0x1F, IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_SRC_SEL_SHIFT)
+#define IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_MODE_SHIFT 5
+#define IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_MODE \
+ MAKEMASK(0x7, IXGBE_ACI_GET_CGU_OUT_CFG_DPLL_MODE_SHIFT)
+ u8 rsvd;
+ __le32 freq;
+ __le32 src_freq;
+ u8 rsvd2[2];
+ __le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_output_config);
+
+/* Get CGU DPLL status (direct 0x0C66) */
+struct ixgbe_aci_cmd_get_cgu_dpll_status {
+ u8 dpll_num;
+ u8 ref_state;
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_LOS BIT(0)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_SCM BIT(1)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_CFM BIT(2)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_GST BIT(3)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_PFM BIT(4)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_FAST_LOCK_EN BIT(5)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_REF_SW_ESYNC BIT(6)
+ __le16 dpll_state;
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_LOCK BIT(0)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_HO BIT(1)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_HO_READY BIT(2)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_FLHIT BIT(5)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_PSLHIT BIT(7)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_CLK_REF_SHIFT 8
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_CLK_REF_SEL \
+ MAKEMASK(0x1F, IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_CLK_REF_SHIFT)
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_MODE_SHIFT 13
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_MODE \
+ MAKEMASK(0x7, IXGBE_ACI_GET_CGU_DPLL_STATUS_STATE_MODE_SHIFT)
+ __le32 phase_offset_h;
+ __le32 phase_offset_l;
+ u8 eec_mode;
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_EEC_MODE_1 0xA
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_EEC_MODE_2 0xB
+#define IXGBE_ACI_GET_CGU_DPLL_STATUS_EEC_MODE_UNKNOWN 0xF
+ u8 rsvd[1];
+ __le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_dpll_status);
+
+/* Set CGU DPLL config (direct 0x0C67) */
+struct ixgbe_aci_cmd_set_cgu_dpll_config {
+ u8 dpll_num;
+ u8 ref_state;
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_LOS BIT(0)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_SCM BIT(1)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_CFM BIT(2)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_GST BIT(3)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_PFM BIT(4)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_FLOCK_EN BIT(5)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_REF_SW_ESYNC BIT(6)
+ u8 rsvd;
+ u8 config;
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_CLK_REF_SEL MAKEMASK(0x1F, 0)
+#define IXGBE_ACI_SET_CGU_DPLL_CONFIG_MODE MAKEMASK(0x7, 5)
+ u8 rsvd2[8];
+ u8 eec_mode;
+ u8 rsvd3[1];
+ __le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_cgu_dpll_config);
+
+/* Set CGU reference priority (direct 0x0C68) */
+struct ixgbe_aci_cmd_set_cgu_ref_prio {
+ u8 dpll_num;
+ u8 ref_idx;
+ u8 ref_priority;
+ u8 rsvd[11];
+ __le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_cgu_ref_prio);
+
+/* Get CGU reference priority (direct 0x0C69) */
+struct ixgbe_aci_cmd_get_cgu_ref_prio {
+ u8 dpll_num;
+ u8 ref_idx;
+ u8 ref_priority; /* Valid only in response */
+ u8 rsvd[13];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_ref_prio);
+
+/* Get CGU info (direct 0x0C6A) */
+struct ixgbe_aci_cmd_get_cgu_info {
+ __le32 cgu_id;
+ __le32 cgu_cfg_ver;
+ __le32 cgu_fw_ver;
+ u8 node_part_num;
+ u8 dev_rev;
+ __le16 node_handle;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_cgu_info);
+
+struct ixgbe_aci_cmd_temp_tca_event {
+ u8 event_desc;
+#define IXGBE_TEMP_TCA_EVENT_DESC_SUBJ_SHIFT 0
+#define IXGBE_TEMP_TCA_EVENT_DESC_SUBJ_NVM 0
+#define IXGBE_TEMP_TCA_EVENT_DESC_SUBJ_EVENT_STATE 1
+#define IXGBE_TEMP_TCA_EVENT_DESC_SUBJ_ALL 2
+
+#define IXGBE_TEMP_TCA_EVENT_DESC_ALARM_SHIFT 2
+#define IXGBE_TEMP_TCA_EVENT_DESC_WARNING_CLEARED 0
+#define IXGBE_TEMP_TCA_EVENT_DESC_ALARM_CLEARED 1
+#define IXGBE_TEMP_TCA_EVENT_DESC_WARNING_RAISED 2
+#define IXGBE_TEMP_TCA_EVENT_DESC_ALARM_RAISED 3
+
+ u8 reserved;
+ __le16 temperature;
+ __le16 thermal_sensor_max_value;
+ __le16 thermal_sensor_min_value;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_temp_tca_event);
+
+/* Debug Dump Internal Data (indirect 0xFF08) */
+struct ixgbe_aci_cmd_debug_dump_internals {
+ __le16 cluster_id; /* Expresses next cluster ID in response */
+#define IXGBE_ACI_DBG_DUMP_CLUSTER_ID_LINK 0
+#define IXGBE_ACI_DBG_DUMP_CLUSTER_ID_FULL_CSR_SPACE 1
+ __le16 table_id; /* Used only for non-memory clusters */
+ __le32 idx; /* In table entries for tables, in bytes for memory */
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_debug_dump_internals);
+
+/* Set Health Status (direct 0xFF20) */
+struct ixgbe_aci_cmd_set_health_status_config {
+ u8 event_source;
+#define IXGBE_ACI_HEALTH_STATUS_SET_PF_SPECIFIC_MASK BIT(0)
+#define IXGBE_ACI_HEALTH_STATUS_SET_ALL_PF_MASK BIT(1)
+#define IXGBE_ACI_HEALTH_STATUS_SET_GLOBAL_MASK BIT(2)
+ u8 reserved[15];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_set_health_status_config);
+
+#define IXGBE_ACI_HEALTH_STATUS_ERR_UNKNOWN_MOD_STRICT 0x101
+#define IXGBE_ACI_HEALTH_STATUS_ERR_MOD_TYPE 0x102
+#define IXGBE_ACI_HEALTH_STATUS_ERR_MOD_QUAL 0x103
+#define IXGBE_ACI_HEALTH_STATUS_ERR_MOD_COMM 0x104
+#define IXGBE_ACI_HEALTH_STATUS_ERR_MOD_CONFLICT 0x105
+#define IXGBE_ACI_HEALTH_STATUS_ERR_MOD_NOT_PRESENT 0x106
+#define IXGBE_ACI_HEALTH_STATUS_INFO_MOD_UNDERUTILIZED 0x107
+#define IXGBE_ACI_HEALTH_STATUS_ERR_UNKNOWN_MOD_LENIENT 0x108
+#define IXGBE_ACI_HEALTH_STATUS_ERR_MOD_DIAGNOSTIC_FEATURE 0x109
+#define IXGBE_ACI_HEALTH_STATUS_ERR_INVALID_LINK_CFG 0x10B
+#define IXGBE_ACI_HEALTH_STATUS_ERR_PORT_ACCESS 0x10C
+#define IXGBE_ACI_HEALTH_STATUS_ERR_PORT_UNREACHABLE 0x10D
+#define IXGBE_ACI_HEALTH_STATUS_INFO_PORT_SPEED_MOD_LIMITED 0x10F
+#define IXGBE_ACI_HEALTH_STATUS_ERR_PARALLEL_FAULT 0x110
+#define IXGBE_ACI_HEALTH_STATUS_INFO_PORT_SPEED_PHY_LIMITED 0x111
+#define IXGBE_ACI_HEALTH_STATUS_ERR_NETLIST_TOPO 0x112
+#define IXGBE_ACI_HEALTH_STATUS_ERR_NETLIST 0x113
+#define IXGBE_ACI_HEALTH_STATUS_ERR_TOPO_CONFLICT 0x114
+#define IXGBE_ACI_HEALTH_STATUS_ERR_LINK_HW_ACCESS 0x115
+#define IXGBE_ACI_HEALTH_STATUS_ERR_LINK_RUNTIME 0x116
+#define IXGBE_ACI_HEALTH_STATUS_ERR_DNL_INIT 0x117
+#define IXGBE_ACI_HEALTH_STATUS_ERR_PHY_NVM_PROG 0x120
+#define IXGBE_ACI_HEALTH_STATUS_ERR_PHY_FW_LOAD 0x121
+#define IXGBE_ACI_HEALTH_STATUS_INFO_RECOVERY 0x500
+#define IXGBE_ACI_HEALTH_STATUS_ERR_FLASH_ACCESS 0x501
+#define IXGBE_ACI_HEALTH_STATUS_ERR_NVM_AUTH 0x502
+#define IXGBE_ACI_HEALTH_STATUS_ERR_OROM_AUTH 0x503
+#define IXGBE_ACI_HEALTH_STATUS_ERR_DDP_AUTH 0x504
+#define IXGBE_ACI_HEALTH_STATUS_ERR_NVM_COMPAT 0x505
+#define IXGBE_ACI_HEALTH_STATUS_ERR_OROM_COMPAT 0x506
+#define IXGBE_ACI_HEALTH_STATUS_ERR_NVM_SEC_VIOLATION 0x507
+#define IXGBE_ACI_HEALTH_STATUS_ERR_OROM_SEC_VIOLATION 0x508
+#define IXGBE_ACI_HEALTH_STATUS_ERR_DCB_MIB 0x509
+#define IXGBE_ACI_HEALTH_STATUS_ERR_MNG_TIMEOUT 0x50A
+#define IXGBE_ACI_HEALTH_STATUS_ERR_BMC_RESET 0x50B
+#define IXGBE_ACI_HEALTH_STATUS_ERR_LAST_MNG_FAIL 0x50C
+#define IXGBE_ACI_HEALTH_STATUS_ERR_RESOURCE_ALLOC_FAIL 0x50D
+#define IXGBE_ACI_HEALTH_STATUS_ERR_FW_LOOP 0x1000
+#define IXGBE_ACI_HEALTH_STATUS_ERR_FW_PFR_FAIL 0x1001
+#define IXGBE_ACI_HEALTH_STATUS_ERR_LAST_FAIL_AQ 0x1002
+
+/* Get Health Status codes (indirect 0xFF21) */
+struct ixgbe_aci_cmd_get_supported_health_status_codes {
+ __le16 health_code_count;
+ u8 reserved[6];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_supported_health_status_codes);
+
+/* Get Health Status (indirect 0xFF22) */
+struct ixgbe_aci_cmd_get_health_status {
+ __le16 health_status_count;
+ u8 reserved[6];
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_get_health_status);
+
+/* Get Health Status event buffer entry, (0xFF22)
+ * repeated per reported health status
+ */
+struct ixgbe_aci_cmd_health_status_elem {
+ __le16 health_status_code;
+ __le16 event_source;
+#define IXGBE_ACI_HEALTH_STATUS_PF (0x1)
+#define IXGBE_ACI_HEALTH_STATUS_PORT (0x2)
+#define IXGBE_ACI_HEALTH_STATUS_GLOBAL (0x3)
+ __le32 internal_data1;
+#define IXGBE_ACI_HEALTH_STATUS_UNDEFINED_DATA (0xDEADBEEF)
+ __le32 internal_data2;
+};
+
+IXGBE_CHECK_STRUCT_LEN(12, ixgbe_aci_cmd_health_status_elem);
+
+/* Clear Health Status (direct 0xFF23) */
+struct ixgbe_aci_cmd_clear_health_status {
+ __le32 reserved[4];
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_clear_health_status);
+
+enum ixgbe_aci_fw_logging_mod {
+ IXGBE_ACI_FW_LOG_ID_GENERAL = 0,
+ IXGBE_ACI_FW_LOG_ID_CTRL = 1,
+ IXGBE_ACI_FW_LOG_ID_LINK = 2,
+ IXGBE_ACI_FW_LOG_ID_LINK_TOPO = 3,
+ IXGBE_ACI_FW_LOG_ID_DNL = 4,
+ IXGBE_ACI_FW_LOG_ID_I2C = 5,
+ IXGBE_ACI_FW_LOG_ID_SDP = 6,
+ IXGBE_ACI_FW_LOG_ID_MDIO = 7,
+ IXGBE_ACI_FW_LOG_ID_ADMINQ = 8,
+ IXGBE_ACI_FW_LOG_ID_HDMA = 9,
+ IXGBE_ACI_FW_LOG_ID_LLDP = 10,
+ IXGBE_ACI_FW_LOG_ID_DCBX = 11,
+ IXGBE_ACI_FW_LOG_ID_DCB = 12,
+ IXGBE_ACI_FW_LOG_ID_XLR = 13,
+ IXGBE_ACI_FW_LOG_ID_NVM = 14,
+ IXGBE_ACI_FW_LOG_ID_AUTH = 15,
+ IXGBE_ACI_FW_LOG_ID_VPD = 16,
+ IXGBE_ACI_FW_LOG_ID_IOSF = 17,
+ IXGBE_ACI_FW_LOG_ID_PARSER = 18,
+ IXGBE_ACI_FW_LOG_ID_SW = 19,
+ IXGBE_ACI_FW_LOG_ID_SCHEDULER = 20,
+ IXGBE_ACI_FW_LOG_ID_TXQ = 21,
+ IXGBE_ACI_FW_LOG_ID_ACL = 22,
+ IXGBE_ACI_FW_LOG_ID_POST = 23,
+ IXGBE_ACI_FW_LOG_ID_WATCHDOG = 24,
+ IXGBE_ACI_FW_LOG_ID_TASK_DISPATCH = 25,
+ IXGBE_ACI_FW_LOG_ID_MNG = 26,
+ IXGBE_ACI_FW_LOG_ID_SYNCE = 27,
+ IXGBE_ACI_FW_LOG_ID_HEALTH = 28,
+ IXGBE_ACI_FW_LOG_ID_TSDRV = 29,
+ IXGBE_ACI_FW_LOG_ID_PFREG = 30,
+ IXGBE_ACI_FW_LOG_ID_MDLVER = 31,
+ IXGBE_ACI_FW_LOG_ID_MAX = 32,
+};
+
+/* Only a single log level should be set and all log levels under the set value
+ * are enabled, e.g. if log level is set to IXGBE_FWLOG_LEVEL_VERBOSE, then all
+ * other log levels are included (except IXGBE_FWLOG_LEVEL_NONE)
+ */
+enum ixgbe_fwlog_level {
+ IXGBE_FWLOG_LEVEL_NONE = 0,
+ IXGBE_FWLOG_LEVEL_ERROR = 1,
+ IXGBE_FWLOG_LEVEL_WARNING = 2,
+ IXGBE_FWLOG_LEVEL_NORMAL = 3,
+ IXGBE_FWLOG_LEVEL_VERBOSE = 4,
+ IXGBE_FWLOG_LEVEL_INVALID, /* all values >= this entry are invalid */
+};
+
+struct ixgbe_fwlog_module_entry {
+ /* module ID for the corresponding firmware logging event */
+ u16 module_id;
+ /* verbosity level for the module_id */
+ u8 log_level;
+};
+
+struct ixgbe_fwlog_cfg {
+ /* list of modules for configuring log level */
+ struct ixgbe_fwlog_module_entry module_entries[IXGBE_ACI_FW_LOG_ID_MAX];
+#define IXGBE_FWLOG_OPTION_ARQ_ENA BIT(0)
+#define IXGBE_FWLOG_OPTION_UART_ENA BIT(1)
+ /* set before calling ixgbe_fwlog_init() so the PF registers for firmware
+ * logging on initialization
+ */
+#define IXGBE_FWLOG_OPTION_REGISTER_ON_INIT BIT(2)
+ /* set in the ixgbe_fwlog_get() response if the PF is registered for FW
+ * logging events over ARQ
+ */
+#define IXGBE_FWLOG_OPTION_IS_REGISTERED BIT(3)
+ /* options used to configure firmware logging */
+ u16 options;
+ /* minimum number of log events sent per Admin Receive Queue event */
+ u8 log_resolution;
+};
+
+struct ixgbe_fwlog_data {
+ u16 data_size;
+ u8 *data;
+};
+
+struct ixgbe_fwlog_ring {
+ struct ixgbe_fwlog_data *rings;
+ u16 size;
+ u16 head;
+ u16 tail;
+};
+
+#define IXGBE_FWLOG_RING_SIZE_DFLT 256
+#define IXGBE_FWLOG_RING_SIZE_MAX 512
+
+/* Set FW Logging configuration (indirect 0xFF30)
+ * Register for FW Logging (indirect 0xFF31)
+ * Query FW Logging (indirect 0xFF32)
+ * FW Log Event (indirect 0xFF33)
+ * Get FW Log (indirect 0xFF34)
+ * Clear FW Log (indirect 0xFF35)
+ */
+struct ixgbe_aci_cmd_fw_log {
+ u8 cmd_flags;
+#define IXGBE_ACI_FW_LOG_CONF_UART_EN BIT(0)
+#define IXGBE_ACI_FW_LOG_CONF_AQ_EN BIT(1)
+#define IXGBE_ACI_FW_LOG_QUERY_REGISTERED BIT(2)
+#define IXGBE_ACI_FW_LOG_CONF_SET_VALID BIT(3)
+#define IXGBE_ACI_FW_LOG_AQ_REGISTER BIT(0)
+#define IXGBE_ACI_FW_LOG_AQ_QUERY BIT(2)
+#define IXGBE_ACI_FW_LOG_PERSISTENT BIT(0)
+ u8 rsp_flag;
+#define IXGBE_ACI_FW_LOG_MORE_DATA BIT(1)
+ __le16 fw_rt_msb;
+ union {
+ struct {
+ __le32 fw_rt_lsb;
+ } sync;
+ struct {
+ __le16 log_resolution;
+#define IXGBE_ACI_FW_LOG_MIN_RESOLUTION (1)
+#define IXGBE_ACI_FW_LOG_MAX_RESOLUTION (128)
+ __le16 mdl_cnt;
+ } cfg;
+ } ops;
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
+IXGBE_CHECK_PARAM_LEN(ixgbe_aci_cmd_fw_log);
+
+/* Response Buffer for:
+ * Set Firmware Logging Configuration (0xFF30)
+ * Query FW Logging (0xFF32)
+ */
+struct ixgbe_aci_cmd_fw_log_cfg_resp {
+ __le16 module_identifier;
+ u8 log_level;
+ u8 rsvd0;
+};
+
+IXGBE_CHECK_STRUCT_LEN(4, ixgbe_aci_cmd_fw_log_cfg_resp);
+
+/**
+ * struct ixgbe_aq_desc - Admin Command (AC) descriptor
+ * @flags: IXGBE_ACI_FLAG_* flags
+ * @opcode: Admin command opcode
+ * @datalen: length in bytes of indirect/external data buffer
+ * @retval: return value from firmware
+ * @cookie_high: opaque data high-half
+ * @cookie_low: opaque data low-half
+ * @params: command-specific parameters
+ *
+ * Descriptor format for commands the driver posts via the Admin Command Interface
+ * (ACI). The firmware writes back onto the command descriptor and returns
+ * the result of the command. Asynchronous events that are not an immediate
+ * result of the command are written to the Admin Command Interface (ACI) using
+ * the same descriptor format. Descriptors are in little-endian notation with
+ * 32-bit words.
+ */
+struct ixgbe_aci_desc {
+ __le16 flags;
+ __le16 opcode;
+ __le16 datalen;
+ __le16 retval;
+ __le32 cookie_high;
+ __le32 cookie_low;
+ union {
+ u8 raw[16];
+ struct ixgbe_aci_cmd_generic generic;
+ struct ixgbe_aci_cmd_get_ver get_ver;
+ struct ixgbe_aci_cmd_driver_ver driver_ver;
+ struct ixgbe_aci_cmd_get_exp_err exp_err;
+ struct ixgbe_aci_cmd_req_res res_owner;
+ struct ixgbe_aci_cmd_list_caps get_cap;
+ struct ixgbe_aci_cmd_disable_rxen disable_rxen;
+ struct ixgbe_aci_cmd_get_fw_event get_fw_event;
+ struct ixgbe_aci_cmd_get_phy_caps get_phy;
+ struct ixgbe_aci_cmd_set_phy_cfg set_phy;
+ struct ixgbe_aci_cmd_restart_an restart_an;
+ struct ixgbe_aci_cmd_get_link_status get_link_status;
+ struct ixgbe_aci_cmd_set_event_mask set_event_mask;
+ struct ixgbe_aci_cmd_get_link_topo get_link_topo;
+ struct ixgbe_aci_cmd_i2c read_write_i2c;
+ struct ixgbe_aci_cmd_read_i2c_resp read_i2c_resp;
+ struct ixgbe_aci_cmd_mdio read_write_mdio;
+ struct ixgbe_aci_cmd_mdio read_mdio;
+ struct ixgbe_aci_cmd_mdio write_mdio;
+ struct ixgbe_aci_cmd_set_port_id_led set_port_id_led;
+ struct ixgbe_aci_cmd_gpio_by_func read_write_gpio_by_func;
+ struct ixgbe_aci_cmd_gpio read_write_gpio;
+ struct ixgbe_aci_cmd_sff_eeprom read_write_sff_param;
+ struct ixgbe_aci_cmd_prog_topo_dev_nvm prog_topo_dev_nvm;
+ struct ixgbe_aci_cmd_read_topo_dev_nvm read_topo_dev_nvm;
+ struct ixgbe_aci_cmd_nvm nvm;
+ struct ixgbe_aci_cmd_nvm_cfg nvm_cfg;
+ struct ixgbe_aci_cmd_nvm_checksum nvm_checksum;
+ struct ixgbe_aci_cmd_read_write_alt_direct read_write_alt_direct;
+ struct ixgbe_aci_cmd_read_write_alt_indirect read_write_alt_indirect;
+ struct ixgbe_aci_cmd_done_alt_write done_alt_write;
+ struct ixgbe_aci_cmd_clear_port_alt_write clear_port_alt_write;
+ struct ixgbe_aci_cmd_debug_dump_internals debug_dump;
+ struct ixgbe_aci_cmd_set_health_status_config
+ set_health_status_config;
+ struct ixgbe_aci_cmd_get_supported_health_status_codes
+ get_supported_health_status_codes;
+ struct ixgbe_aci_cmd_get_health_status get_health_status;
+ struct ixgbe_aci_cmd_clear_health_status clear_health_status;
+ struct ixgbe_aci_cmd_fw_log fw_log;
+ struct ixgbe_aci_cmd_nvm_sanitization nvm_sanitization;
+ } params;
+};
+
+/* LKV-specific adapter context structures */
+
+struct ixgbe_link_status {
+ /* Refer to ixgbe_aci_phy_type for bits definition */
+ u64 phy_type_low;
+ u64 phy_type_high;
+ u8 topo_media_conflict;
+ u16 max_frame_size;
+ u16 link_speed;
+ u16 req_speeds;
+ u8 link_cfg_err;
+ u8 lse_ena; /* Link Status Event notification */
+ u8 link_info;
+ u8 an_info;
+ u8 ext_info;
+ u8 fec_info;
+ u8 pacing;
+ /* Refer to #define from module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE] of
+ * ixgbe_aci_get_phy_caps structure
+ */
+ u8 module_type[IXGBE_ACI_MODULE_TYPE_TOTAL_BYTE];
+};
+
+/* Common HW capabilities for SW use */
+struct ixgbe_hw_common_caps {
+ /* Write CSR protection */
+ u64 wr_csr_prot;
+ u32 switching_mode;
+ /* switching mode supported - EVB switching (including cloud) */
+#define IXGBE_NVM_IMAGE_TYPE_EVB 0x0
+
+ /* Manageability mode & supported protocols over MCTP */
+ u32 mgmt_mode;
+#define IXGBE_MGMT_MODE_PASS_THRU_MODE_M 0xF
+#define IXGBE_MGMT_MODE_CTL_INTERFACE_M 0xF0
+#define IXGBE_MGMT_MODE_REDIR_SB_INTERFACE_M 0xF00
+
+ u32 mgmt_protocols_mctp;
+#define IXGBE_MGMT_MODE_PROTO_RSVD BIT(0)
+#define IXGBE_MGMT_MODE_PROTO_PLDM BIT(1)
+#define IXGBE_MGMT_MODE_PROTO_OEM BIT(2)
+#define IXGBE_MGMT_MODE_PROTO_NC_SI BIT(3)
+
+ u32 os2bmc;
+ u32 valid_functions;
+ /* DCB capabilities */
+ u32 active_tc_bitmap;
+ u32 maxtc;
+
+ /* RSS related capabilities */
+ u32 rss_table_size; /* 512 for PFs and 64 for VFs */
+ u32 rss_table_entry_width; /* RSS Entry width in bits */
+
+ /* Tx/Rx queues */
+ u32 num_rxq; /* Number/Total Rx queues */
+ u32 rxq_first_id; /* First queue ID for Rx queues */
+ u32 num_txq; /* Number/Total Tx queues */
+ u32 txq_first_id; /* First queue ID for Tx queues */
+
+ /* MSI-X vectors */
+ u32 num_msix_vectors;
+ u32 msix_vector_first_id;
+
+ /* Max MTU for function or device */
+ u32 max_mtu;
+
+ /* WOL related */
+ u32 num_wol_proxy_fltr;
+ u32 wol_proxy_vsi_seid;
+
+ /* LED/SDP pin count */
+ u32 led_pin_num;
+ u32 sdp_pin_num;
+
+ /* LED/SDP - Supports up to 12 LED pins and 8 SDP signals */
+#define IXGBE_MAX_SUPPORTED_GPIO_LED 12
+#define IXGBE_MAX_SUPPORTED_GPIO_SDP 8
+ u8 led[IXGBE_MAX_SUPPORTED_GPIO_LED];
+ u8 sdp[IXGBE_MAX_SUPPORTED_GPIO_SDP];
+ /* SR-IOV virtualization */
+ u8 sr_iov_1_1; /* SR-IOV enabled */
+ /* VMDQ */
+ u8 vmdq; /* VMDQ supported */
+
+ /* EVB capabilities */
+ u8 evb_802_1_qbg; /* Edge Virtual Bridging */
+ u8 evb_802_1_qbh; /* Bridge Port Extension */
+
+ u8 dcb;
+ u8 iscsi;
+ u8 mgmt_cem;
+
+ /* WoL and APM support */
+#define IXGBE_WOL_SUPPORT_M BIT(0)
+#define IXGBE_ACPI_PROG_MTHD_M BIT(1)
+#define IXGBE_PROXY_SUPPORT_M BIT(2)
+ u8 apm_wol_support;
+ u8 acpi_prog_mthd;
+ u8 proxy_support;
+ bool sec_rev_disabled;
+ bool update_disabled;
+ bool nvm_unified_update;
+ bool netlist_auth;
+#define IXGBE_NVM_MGMT_SEC_REV_DISABLED BIT(0)
+#define IXGBE_NVM_MGMT_UPDATE_DISABLED BIT(1)
+#define IXGBE_NVM_MGMT_UNIFIED_UPD_SUPPORT BIT(3)
+#define IXGBE_NVM_MGMT_NETLIST_AUTH_SUPPORT BIT(5)
+ bool no_drop_policy_support;
+ /* PCIe reset avoidance */
+ bool pcie_reset_avoidance; /* false: not supported, true: supported */
+ /* Post update reset restriction */
+ bool reset_restrict_support; /* false: not supported, true: supported */
+
+ /* External topology device images within the NVM */
+#define IXGBE_EXT_TOPO_DEV_IMG_COUNT 4
+ u32 ext_topo_dev_img_ver_high[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+ u32 ext_topo_dev_img_ver_low[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+ u8 ext_topo_dev_img_part_num[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+#define IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_S 8
+#define IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_M \
+ MAKEMASK(0xFF, IXGBE_EXT_TOPO_DEV_IMG_PART_NUM_S)
+ bool ext_topo_dev_img_load_en[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+#define IXGBE_EXT_TOPO_DEV_IMG_LOAD_EN BIT(0)
+ bool ext_topo_dev_img_prog_en[IXGBE_EXT_TOPO_DEV_IMG_COUNT];
+#define IXGBE_EXT_TOPO_DEV_IMG_PROG_EN BIT(1)
+ /* Support for OROM update in Recovery Mode. */
+ bool orom_recovery_update;
+ bool next_cluster_id_support;
+};
+
+#pragma pack(1)
+struct ixgbe_orom_civd_info {
+ u8 signature[4]; /* Must match ASCII '$CIV' characters */
+ u8 checksum; /* Simple modulo 256 sum of all structure bytes must equal 0 */
+ __le32 combo_ver; /* Combo Image Version number */
+ u8 combo_name_len; /* Length of the unicode combo image version string, max of 32 */
+ __le16 combo_name[32]; /* Unicode string representing the Combo Image version */
+};
+#pragma pack()
+
+/* Function specific capabilities */
+struct ixgbe_hw_func_caps {
+ struct ixgbe_hw_common_caps common_cap;
+ u32 num_allocd_vfs; /* Number of allocated VFs */
+ u32 vf_base_id; /* Logical ID of the first VF */
+ u32 guar_num_vsi;
+ bool no_drop_policy_ena;
+};
+
+/* Device wide capabilities */
+struct ixgbe_hw_dev_caps {
+ struct ixgbe_hw_common_caps common_cap;
+ u32 num_vfs_exposed; /* Total number of VFs exposed */
+ u32 num_vsi_allocd_to_host; /* Excluding EMP VSI */
+ u32 num_flow_director_fltr; /* Number of FD filters available */
+ u32 num_funcs;
+};
+
+/* ACI event information */
+struct ixgbe_aci_event {
+ struct ixgbe_aci_desc desc;
+ u16 msg_len;
+ u16 buf_len;
+ u8 *msg_buf;
+};
+
+struct ixgbe_aci_info {
+ enum ixgbe_aci_err last_status; /* last status of sent admin command */
+ struct ixgbe_lock lock; /* admin command interface lock */
+};
+
+/* Minimum Security Revision information */
+struct ixgbe_minsrev_info {
+ u32 nvm;
+ u32 orom;
+ u8 nvm_valid : 1;
+ u8 orom_valid : 1;
+};
+
+/* Enumeration of which flash bank is desired to read from, either the active
+ * bank or the inactive bank. Used to abstract 1st and 2nd bank notion from
+ * code which just wants to read the active or inactive flash bank.
+ */
+enum ixgbe_bank_select {
+ IXGBE_ACTIVE_FLASH_BANK,
+ IXGBE_INACTIVE_FLASH_BANK,
+};
+
+/* Option ROM version information */
+struct ixgbe_orom_info {
+ u8 major; /* Major version of OROM */
+ u8 patch; /* Patch version of OROM */
+ u16 build; /* Build version of OROM */
+ u32 srev; /* Security revision */
+};
+
+/* NVM version information */
+struct ixgbe_nvm_info {
+ u32 eetrack;
+ u32 srev;
+ u8 major;
+ u8 minor;
+};
+
+/* netlist version information */
+struct ixgbe_netlist_info {
+ u32 major; /* major high/low */
+ u32 minor; /* minor high/low */
+ u32 type; /* type high/low */
+ u32 rev; /* revision high/low */
+ u32 hash; /* SHA-1 hash word */
+ u16 cust_ver; /* customer version */
+};
+
+/* Enumeration of possible flash banks for the NVM, OROM, and Netlist modules
+ * of the flash image.
+ */
+enum ixgbe_flash_bank {
+ IXGBE_INVALID_FLASH_BANK,
+ IXGBE_1ST_FLASH_BANK,
+ IXGBE_2ND_FLASH_BANK,
+};
+
+/* information for accessing NVM, OROM, and Netlist flash banks */
+struct ixgbe_bank_info {
+ u32 nvm_ptr; /* Pointer to 1st NVM bank */
+ u32 nvm_size; /* Size of NVM bank */
+ u32 orom_ptr; /* Pointer to 1st OROM bank */
+ u32 orom_size; /* Size of OROM bank */
+ u32 netlist_ptr; /* Pointer to 1st Netlist bank */
+ u32 netlist_size; /* Size of Netlist bank */
+ enum ixgbe_flash_bank nvm_bank; /* Active NVM bank */
+ enum ixgbe_flash_bank orom_bank; /* Active OROM bank */
+ enum ixgbe_flash_bank netlist_bank; /* Active Netlist bank */
+};
+
+/* Flash Chip Information */
+struct ixgbe_flash_info {
+ struct ixgbe_orom_info orom; /* Option ROM version info */
+ struct ixgbe_nvm_info nvm; /* NVM version information */
+ struct ixgbe_netlist_info netlist; /* Netlist version info */
+ struct ixgbe_bank_info banks; /* Flash Bank information */
+ u16 sr_words; /* Shadow RAM size in words */
+ u32 flash_size; /* Size of available flash in bytes */
+ u8 blank_nvm_mode; /* is NVM empty (no FW present) */
+};
+
+#define IXGBE_NVM_CMD_READ 0x0000000B
+#define IXGBE_NVM_CMD_WRITE 0x0000000C
+
+/* NVM Access command */
+struct ixgbe_nvm_access_cmd {
+ u32 command; /* NVM command: READ or WRITE */
+ u32 offset; /* Offset to read/write, in bytes */
+ u32 data_size; /* Size of data field, in bytes */
+};
+
+/* NVM Access data */
+struct ixgbe_nvm_access_data {
+ u32 regval; /* Storage for register value */
+};
+
+#endif /* _IXGBE_TYPE_E610_H_ */
diff --git a/sys/dev/ixgbe/ixgbe_vf.c b/sys/dev/ixgbe/ixgbe_vf.c
--- a/sys/dev/ixgbe/ixgbe_vf.c
+++ b/sys/dev/ixgbe/ixgbe_vf.c
@@ -656,7 +656,8 @@
break;
case IXGBE_LINKS_SPEED_100_82599:
*speed = IXGBE_LINK_SPEED_100_FULL;
- if (hw->mac.type == ixgbe_mac_X550_vf) {
+ if (hw->mac.type == ixgbe_mac_X550_vf ||
+ hw->mac.type == ixgbe_mac_E610_vf) {
if (links_reg & IXGBE_LINKS_SPEED_NON_STD)
*speed = IXGBE_LINK_SPEED_5GB_FULL;
}
diff --git a/sys/modules/ix/Makefile b/sys/modules/ix/Makefile
--- a/sys/modules/ix/Makefile
+++ b/sys/modules/ix/Makefile
@@ -7,7 +7,7 @@
# Shared source
SRCS += ixgbe_common.c ixgbe_api.c ixgbe_phy.c ixgbe_mbx.c ixgbe_vf.c
SRCS += ixgbe_dcb.c ixgbe_dcb_82598.c ixgbe_dcb_82599.c
-SRCS += ixgbe_82598.c ixgbe_82599.c ixgbe_x540.c ixgbe_x550.c
+SRCS += ixgbe_82598.c ixgbe_82599.c ixgbe_x540.c ixgbe_x550.c ixgbe_e610.c
CFLAGS+= -I${SRCTOP}/sys/dev/ixgbe
.include <bsd.kmod.mk>
diff --git a/sys/modules/ixv/Makefile b/sys/modules/ixv/Makefile
--- a/sys/modules/ixv/Makefile
+++ b/sys/modules/ixv/Makefile
@@ -7,7 +7,7 @@
# Shared source
SRCS += ixgbe_common.c ixgbe_api.c ixgbe_phy.c ixgbe_mbx.c ixgbe_vf.c
SRCS += ixgbe_dcb.c ixgbe_dcb_82598.c ixgbe_dcb_82599.c
-SRCS += ixgbe_82598.c ixgbe_82599.c ixgbe_x540.c ixgbe_x550.c
+SRCS += ixgbe_82598.c ixgbe_82599.c ixgbe_x540.c ixgbe_x550.c ixgbe_e610.c
CFLAGS+= -I${SRCTOP}/sys/dev/ixgbe
.include <bsd.kmod.mk>

File Metadata

Mime Type
text/plain
Expires
Tue, Mar 31, 12:08 AM (17 h, 38 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
28232724
Default Alt Text
D50067.1774915708.diff (283 KB)

Event Timeline