Page MenuHomeFreeBSD
Files F149188583

D50468.1789646449.diff
No OneTemporary
Actions

Size
41 KB
Referenced Files
None
Subscribers
None

D50468.1789646449.diff
View Options

diff --git a/ObsoleteFiles.inc b/ObsoleteFiles.inc
--- a/ObsoleteFiles.inc
+++ b/ObsoleteFiles.inc
@@ -51,6 +51,12 @@
# xargs -n1 | sort | uniq -d;
# done
+# 20250522: share: Delete bitrotted make_*_driver.sh scripts
+OLD_FILES+=usr/share/examples/drivers/README
+OLD_FILES+=usr/share/examples/drivers/make_device_driver.sh
+OLD_FILES+=usr/share/examples/drivers/make_pseudo_driver.sh
+OLD_DIRS+=usr/share/examples/drivers
+
# 20250505: Remove audio(8) files after rename to sndctl(8)
OLD_FILES+=usr/sbin/audio
OLD_FILES+=usr/share/man/man8/audio.8.gz
diff --git a/share/examples/Makefile b/share/examples/Makefile
--- a/share/examples/Makefile
+++ b/share/examples/Makefile
@@ -10,7 +10,6 @@
FreeBSD_version \
bootforth \
csh \
- drivers \
etc \
find_interface \
flua \
@@ -73,12 +72,6 @@
SE_CSHPACKAGE= csh
SE_CSH= dot.cshrc
-SE_DIRS+= drivers
-SE_DRIVERS= \
- README \
- make_device_driver.sh \
- make_pseudo_driver.sh
-
SE_DIRS+= etc
SE_ETC= \
README.examples \
diff --git a/share/examples/drivers/README b/share/examples/drivers/README
deleted file mode 100644
--- a/share/examples/drivers/README
+++ /dev/null
@@ -1,42 +0,0 @@
-
-Author: Julian Elischer
-
-The files in this directory are shell scripts.
-
-They will, when run, create an example skeleton driver
-for you. You can use this driver as a starting point for
-writing drivers for your own devices. They have all the hooks needed
-for initialization, probing, attaching, as well as DEVFS
-node creation. They also create sample ioctl commands and a sample
-ioctl definition .h file in /sys/sys. In other words they are fully
-functional in a 'skeleton' sort of a way. They support multiple devices
-so that you may have several of your 'foobar' devices probed and attached
-at once.
-
-I expect that these scripts will improve with time.
-
-At present these scripts also link the newly created driver into
-the kernel sources in /sys. Possibly a better way would be
-to make them interactive. (and ask what kernel tree to use as well as
-a name for the driver.).
-
-There are presently two scripts.
-One for making a real device driver for ISA devices, and
-one for making a device driver for pseudo devices (e.g. /dev/null).
-Hopefully they will be joined by similar scripts for creating
-skeletons for PCI devices as well.
-
-Give them a single argument: the name of the driver.
-They will use this given name in many places within the driver,
-both in lower and upper case form. (conforming to normal usage).
-
-The skeleton driver should already link with the kernel
-and in fact the shell script will compile a kernel with the new
-drive linked in.. The new kernel should still be
-runnable and the new driver should be
-fully callable (once you get your device to probe).
-You should simply edit the driver and continue to use
-'make' (as done in the script) until your driver does what you want.
-
-The driver will end up in /sys/i386/isa for the device driver script,
-and in /sys/dev for the pseudo driver script.
diff --git a/share/examples/drivers/make_device_driver.sh b/share/examples/drivers/make_device_driver.sh
deleted file mode 100755
--- a/share/examples/drivers/make_device_driver.sh
+++ /dev/null
@@ -1,1005 +0,0 @@
-#!/bin/sh
-# This writes a skeleton driver and puts it into the kernel tree for you.
-# It also adds FOO and files.FOO configuration files so you can compile
-# a kernel with your FOO driver linked in.
-# To do so:
-# cd /usr/src; make buildkernel KERNCONF=FOO
-#
-# More interestingly, it creates a modules/foo directory
-# which it populates, to allow you to compile a FOO module
-# which can be linked with your presently running kernel (if you feel brave).
-# To do so:
-# cd /sys/modules/foo; make depend; make; make install; kldload foo
-#
-# arg1 to this script is expected to be lowercase "foo"
-# arg2 path to the kernel sources, "/sys" if omitted
-#
-# Trust me, RUN THIS SCRIPT :)
-#
-# TODO:
-# o generate foo_isa.c, foo_pci.c, foo_pccard.c, foo_cardbus.c, and foovar.h
-# o Put pccard stuff in here.
-#
-#
-#
-if [ "X${1}" = "X" ]; then
- echo "Hey, how about some help here... give me a device name!"
- exit 1
-fi
-if [ "X${2}" = "X" ]; then
- TOP=`cd /sys; pwd -P`
- echo "Using ${TOP} as the path to the kernel sources!"
-else
- TOP=${2}
-fi
-UPPER=`echo ${1} |tr "[:lower:]" "[:upper:]"`
-
-if [ -d ${TOP}/modules/${1} ]; then
- echo "There appears to already be a module called ${1}"
- echo -n "Should it be overwritten? [Y]"
- read VAL
- if [ "-z" "$VAL" ]; then
- VAL=YES
- fi
- case ${VAL} in
- [yY]*)
- echo "Cleaning up from prior runs"
- rm -rf ${TOP}/dev/${1}
- rm -rf ${TOP}/modules/${1}
- rm ${TOP}/conf/files.${UPPER}
- rm ${TOP}/i386/conf/${UPPER}
- rm ${TOP}/sys/${1}io.h
- ;;
- *)
- exit 1
- ;;
- esac
-fi
-
-echo "The following files will be created:"
-echo ${TOP}/modules/${1}
-echo ${TOP}/conf/files.${UPPER}
-echo ${TOP}/i386/conf/${UPPER}
-echo ${TOP}/dev/${1}
-echo ${TOP}/dev/${1}/${1}.c
-echo ${TOP}/sys/${1}io.h
-echo ${TOP}/modules/${1}
-echo ${TOP}/modules/${1}/Makefile
-
- mkdir ${TOP}/modules/${1}
-
-#######################################################################
-#######################################################################
-#
-# Create configuration information needed to create a kernel
-# containing this driver.
-#
-# Not really needed if we are going to do this as a module.
-#######################################################################
-# First add the file to a local file list.
-#######################################################################
-
-cat >${TOP}/conf/files.${UPPER} <<DONE
-dev/${1}/${1}.c optional ${1}
-DONE
-
-#######################################################################
-# Then create a configuration file for a kernel that contains this driver.
-#######################################################################
-cat >${TOP}/i386/conf/${UPPER} <<DONE
-# Configuration file for kernel type: ${UPPER}
-
-files "${TOP}/conf/files.${UPPER}"
-
-include GENERIC
-
-ident ${UPPER}
-
-DONE
-
-cat >>${TOP}/i386/conf/${UPPER} <<DONE
-# trust me, you'll need this
-options KDB
-options DDB
-device ${1}
-DONE
-
-if [ ! -d ${TOP}/dev/${1} ]; then
- mkdir -p ${TOP}/dev/${1}
-fi
-
-cat >${TOP}/dev/${1}/${1}.c <<DONE
-/*
- * Copyright (c) [year] [your name]
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-/*
- * http://www.daemonnews.org/200008/isa.html is required reading.
- * hopefully it will make it's way into the handbook.
- */
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/conf.h> /* cdevsw stuff */
-#include <sys/kernel.h> /* SYSINIT stuff */
-#include <sys/uio.h> /* SYSINIT stuff */
-#include <sys/malloc.h> /* malloc region definitions */
-#include <sys/module.h>
-#include <sys/bus.h>
-#include <sys/proc.h>
-#include <sys/time.h>
-#include <sys/${1}io.h> /* ${1} IOCTL definitions */
-
-#include <machine/bus.h>
-#include <machine/resource.h>
-#include <sys/rman.h>
-
-#include <dev/pci/pcireg.h>
-#include <dev/pci/pcivar.h>
-
-#include <isa/isavar.h>
-
-#include "isa_if.h"
-
-/* XXX These should be defined in terms of bus-space ops. */
-#define ${UPPER}_INB(port) inb(port_start)
-#define ${UPPER}_OUTB(port, val) ( port_start, (val))
-#define SOME_PORT 123
-#define EXPECTED_VALUE 0x42
-
-/*
- * The softc is automatically allocated by the parent bus using the
- * size specified in the driver_t declaration below.
- */
-#define DEV2SOFTC(dev) ((struct ${1}_softc *) (dev)->si_drv1)
-#define DEVICE2SOFTC(dev) ((struct ${1}_softc *) device_get_softc(dev))
-
-/*
- * Device specific misc defines.
- */
-#define BUFFERSIZE 1024
-#define NUMPORTS 4
-#define MEMSIZE (4 * 1024) /* Imaginable h/w buffer size. */
-
-/*
- * One of these per allocated device.
- */
-struct ${1}_softc {
- bus_space_tag_t bt;
- bus_space_handle_t bh;
- int rid_ioport;
- int rid_memory;
- int rid_irq;
- int rid_drq;
- struct resource* res_ioport; /* Resource for port range. */
- struct resource* res_memory; /* Resource for mem range. */
- struct resource* res_irq; /* Resource for irq range. */
- struct resource* res_drq; /* Resource for dma channel. */
- device_t device;
- struct cdev *dev;
- void *intr_cookie;
- void *vaddr; /* Virtual address of mem resource. */
- char buffer[BUFFERSIZE]; /* If we need to buffer something. */
-};
-
-/* Function prototypes (these should all be static). */
-static int ${1}_deallocate_resources(device_t device);
-static int ${1}_allocate_resources(device_t device);
-static int ${1}_attach(device_t device, struct ${1}_softc *scp);
-static int ${1}_detach(device_t device, struct ${1}_softc *scp);
-
-static d_open_t ${1}open;
-static d_close_t ${1}close;
-static d_read_t ${1}read;
-static d_write_t ${1}write;
-static d_ioctl_t ${1}ioctl;
-static d_mmap_t ${1}mmap;
-static d_poll_t ${1}poll;
-static void ${1}intr(void *arg);
-
-static struct cdevsw ${1}_cdevsw = {
- .d_version = D_VERSION,
- .d_open = ${1}open,
- .d_close = ${1}close,
- .d_read = ${1}read,
- .d_write = ${1}write,
- .d_ioctl = ${1}ioctl,
- .d_poll = ${1}poll,
- .d_mmap = ${1}mmap,
- .d_name = "${1}",
-};
-
-static devclass_t ${1}_devclass;
-
-/*
- ******************************************
- * ISA Attachment structures and functions.
- ******************************************
- */
-static void ${1}_isa_identify (driver_t *, device_t);
-static int ${1}_isa_probe (device_t);
-static int ${1}_isa_attach (device_t);
-static int ${1}_isa_detach (device_t);
-
-static struct isa_pnp_id ${1}_ids[] = {
- {0x12345678, "ABCco Widget"},
- {0xfedcba98, "shining moon Widget ripoff"},
- {0, NULL}
-};
-
-static device_method_t ${1}_methods[] = {
- DEVMETHOD(device_identify, ${1}_isa_identify),
- DEVMETHOD(device_probe, ${1}_isa_probe),
- DEVMETHOD(device_attach, ${1}_isa_attach),
- DEVMETHOD(device_detach, ${1}_isa_detach),
- DEVMETHOD_END
-};
-
-static driver_t ${1}_isa_driver = {
- "${1}",
- ${1}_methods,
- sizeof (struct ${1}_softc)
-};
-
-DRIVER_MODULE(${1}, isa, ${1}_isa_driver, ${1}_devclass, 0, 0);
-
-/*
- * Here list some port addresses we might expect our widget to appear at:
- * This list should only be used for cards that have some non-destructive
- * (to other cards) way of probing these address. Otherwise the driver
- * should not go looking for instances of itself, but instead rely on
- * the hints file. Strange failures for people with other cards might
- * result.
- */
-static struct localhints {
- int ioport;
- int irq;
- int drq;
- int mem;
-} res[] = {
- { 0x210, 11, 2, 0xcd000},
- { 0x310, 12, 3, 0xdd000},
- { 0x320, 9, 6, 0xd4000},
- {0,0,0,0}
-};
-
-#define MAXHINTS 10 /* Just an arbitrary safety limit. */
-/*
- * Called once when the driver is somehow connected with the bus,
- * (Either linked in and the bus is started, or loaded as a module).
- *
- * The aim of this routine in an ISA driver is to add child entries to
- * the parent bus so that it looks as if the devices were detected by
- * some pnp-like method, or at least mentioned in the hints.
- *
- * For NON-PNP "dumb" devices:
- * Add entries into the bus's list of likely devices, so that
- * our 'probe routine' will be called for them.
- * This is similar to what the 'hints' code achieves, except this is
- * loadable with the driver.
- * In the 'dumb' case we end up with more children than needed but
- * some (or all) of them will fail probe() and only waste a little memory.
- *
- * For NON-PNP "Smart" devices:
- * If the device has a NON-PNP way of being detected and setting/sensing
- * the card, then do that here and add a child for each set of
- * hardware found.
- *
- * For PNP devices:
- * If the device is always PNP capable then this function can be removed.
- * The ISA PNP system will have automatically added it to the system and
- * so your identify routine needn't do anything.
- *
- * If the device is mentioned in the 'hints' file then this
- * function can be removed. All devices mentioned in the hints
- * file get added as children for probing, whether or not the
- * driver is linked in. So even as a module it MAY still be there.
- * See isa/isahint.c for hints being added in.
- */
-static void
-${1}_isa_identify (driver_t *driver, device_t parent)
-{
- u_int32_t irq=0;
- u_int32_t ioport;
- device_t child;
- int i;
-
- /*
- * If we've already got ${UPPER} attached somehow, don't try again.
- * Maybe it was in the hints file. or it was loaded before.
- */
- if (device_find_child(parent, "${1}", 0)) {
- printf("${UPPER}: already attached\n");
- return;
- }
-/* XXX Look at dev/acpica/acpi_isa.c for use of ISA_ADD_CONFIG() macro. */
-/* XXX What is ISA_SET_CONFIG_CALLBACK(parent, child, pnpbios_set_config, 0)? */
- for (i = 0; i < MAXHINTS; i++) {
-
- ioport = res[i].ioport;
- irq = res[i].irq;
- if ((ioport == 0) && (irq == 0))
- return; /* We've added all our local hints. */
-
- child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "${1}", -1);
- bus_set_resource(child, SYS_RES_IOPORT, 0, ioport, NUMPORTS);
- bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
- bus_set_resource(child, SYS_RES_DRQ, 0, res[i].drq, 1);
- bus_set_resource(child, SYS_RES_MEMORY, 0, res[i].mem, MEMSIZE);
-
-#if 0
- /*
- * If we wanted to pretend PNP found it
- * we could do this, and put matching entries
- * in the PNP table, but I think it's probably too hacky.
- * As you see, some people have done it though.
- * Basically EISA (remember that?) would do this I think.
- */
- isa_set_vendorid(child, PNP_EISAID("ESS1888"));
- isa_set_logicalid(child, PNP_EISAID("ESS1888"));
-#endif
- }
-#if 0
- /*
- * Do some smart probing (e.g. like the lnc driver)
- * and add a child for each one found.
- */
-#endif
-
- return;
-}
-/*
- * The ISA code calls this for each device it knows about,
- * whether via the PNP code or via the hints etc.
- * If the device nas no PNP capabilities, remove all the
- * PNP entries, but keep the call to ISA_PNP_PROBE()
- * As it will guard against accidentally recognising
- * foreign hardware. This is because we will be called to check against
- * ALL PNP hardware.
- */
-static int
-${1}_isa_probe (device_t device)
-{
- int error;
- device_t parent = device_get_parent(device);
- struct ${1}_softc *scp = DEVICE2SOFTC(device);
- u_long port_start, port_count;
-
- bzero(scp, sizeof(*scp));
- scp->device = device;
-
- /*
- * Check this device for a PNP match in our table.
- * There are several possible outcomes.
- * error == 0 We match a PNP.
- * error == ENXIO, It is a PNP device but not in our table.
- * error == ENOENT, It is not a PNP device.. try heuristic probes.
- * -- logic from if_ed_isa.c, added info from isa/isa_if.m:
- *
- * If we had a list of devices that we could handle really well,
- * and a list which we could handle only basic functions, then
- * we would call this twice, once for each list,
- * and return a value of '-2' or something if we could
- * only handle basic functions. This would allow a specific
- * Widgetplus driver to make a better offer if it knows how to
- * do all the extended functions. (See non-pnp part for more info).
- */
- error = ISA_PNP_PROBE(parent, device, ${1}_ids);
- switch (error) {
- case 0:
- /*
- * We found a PNP device.
- * Do nothing, as it's all done in attach().
- */
- break;
- case ENOENT:
- /*
- * Well it didn't show up in the PNP tables
- * so look directly at known ports (if we have any)
- * in case we are looking for an old pre-PNP card.
- *
- * Hopefully the 'identify' routine will have picked these
- * up for us first if they use some proprietary detection
- * method.
- *
- * The ports, irqs etc should come from a 'hints' section
- * which is read in by code in isa/isahint.c
- * and kern/subr_bus.c to create resource entries,
- * or have been added by the 'identify routine above.
- * Note that HINTS based resource requests have NO
- * SIZE for the memory or ports requests (just a base)
- * so we may need to 'correct' this before we
- * do any probing.
- */
- /*
- * Find out the values of any resources we
- * need for our dumb probe. Also check we have enough ports
- * in the request. (could be hints based).
- * Should probably do the same for memory regions too.
- */
- error = bus_get_resource(device, SYS_RES_IOPORT, 0,
- &port_start, &port_count);
- if (port_count != NUMPORTS) {
- bus_set_resource(device, SYS_RES_IOPORT, 0,
- port_start, NUMPORTS);
- }
-
- /*
- * Make a temporary resource reservation.
- * If we can't get the resources we need then
- * we need to abort. Possibly this indicates
- * the resources were used by another device
- * in which case the probe would have failed anyhow.
- */
- if ((error = (${1}_allocate_resources(device)))) {
- error = ENXIO;
- goto errexit;
- }
-
- /* Dummy heuristic type probe. */
- if (inb(port_start) != EXPECTED_VALUE) {
- /*
- * It isn't what we hoped, so quit looking for it.
- */
- error = ENXIO;
- } else {
- u_long membase = bus_get_resource_start(device,
- SYS_RES_MEMORY, 0 /*rid*/);
- u_long memsize;
- /*
- * If we discover in some way that the device has
- * XXX bytes of memory window, we can override
- * or set the memory size in the child resource list.
- */
- memsize = inb(port_start + 1) * 1024; /* for example */
- error = bus_set_resource(device, SYS_RES_MEMORY,
- /*rid*/0, membase, memsize);
- /*
- * We found one, return non-positive numbers..
- * Return -N if we can't handle it, but not well.
- * Return -2 if we would LIKE the device.
- * Return -1 if we want it a lot.
- * Return 0 if we MUST get the device.
- * This allows drivers to 'bid' for a device.
- */
- device_set_desc(device, "ACME Widget model 1234");
- error = -1; /* We want it but someone else
- may be even better. */
- }
- /*
- * Unreserve the resources for now because
- * another driver may bid for device too.
- * If we lose the bid, but still hold the resources, we will
- * effectively have disabled the other driver from getting them
- * which will result in neither driver getting the device.
- * We will ask for them again in attach if we win.
- */
- ${1}_deallocate_resources(device);
- break;
- case ENXIO:
- /* It was PNP but not ours, leave immediately. */
- default:
- error = ENXIO;
- }
-errexit:
- return (error);
-}
-
-/*
- * Called if the probe succeeded and our bid won the device.
- * We can be destructive here as we know we have the device.
- * This is the first place we can be sure we have a softc structure.
- * You would do ISA specific attach things here, but generically there aren't
- * any (yay new-bus!).
- */
-static int
-${1}_isa_attach (device_t device)
-{
- int error;
- struct ${1}_softc *scp = DEVICE2SOFTC(device);
-
- error = ${1}_attach(device, scp);
- if (error)
- ${1}_isa_detach(device);
- return (error);
-}
-
-/*
- * Detach the driver (e.g. module unload),
- * call the bus independent version
- * and undo anything we did in the ISA attach routine.
- */
-static int
-${1}_isa_detach (device_t device)
-{
- int error;
- struct ${1}_softc *scp = DEVICE2SOFTC(device);
-
- error = ${1}_detach(device, scp);
- return (error);
-}
-
-/*
- ***************************************
- * PCI Attachment structures and code
- ***************************************
- */
-
-static int ${1}_pci_probe(device_t);
-static int ${1}_pci_attach(device_t);
-static int ${1}_pci_detach(device_t);
-
-static device_method_t ${1}_pci_methods[] = {
- /* Device interface */
- DEVMETHOD(device_probe, ${1}_pci_probe),
- DEVMETHOD(device_attach, ${1}_pci_attach),
- DEVMETHOD(device_detach, ${1}_pci_detach),
- { 0, 0 }
-};
-
-static driver_t ${1}_pci_driver = {
- "${1}",
- ${1}_pci_methods,
- sizeof(struct ${1}_softc),
-};
-
-DRIVER_MODULE(${1}, pci, ${1}_pci_driver, ${1}_devclass, 0, 0);
-/*
- * Cardbus is a pci bus plus extra, so use the pci driver unless special
- * things need to be done only in the cardbus case.
- */
-DRIVER_MODULE(${1}, cardbus, ${1}_pci_driver, ${1}_devclass, 0, 0);
-
-static struct _pcsid
-{
- u_int32_t type;
- const char *desc;
-} pci_ids[] = {
- { 0x1234abcd, "ACME PCI Widgetplus" },
- { 0x1243fedc, "Happy moon brand RIPOFFplus" },
- { 0x00000000, NULL }
-};
-
-/*
- * See if this card is specifically mentioned in our list of known devices.
- * Theoretically we might also put in a weak bid for some devices that
- * report themselves to be some generic type of device if we can handle
- * that generic type. (other PCI_XXX calls give that info).
- * This would allow a specific driver to over-ride us.
- *
- * See the comments in the ISA section regarding returning non-positive
- * values from probe routines.
- */
-static int
-${1}_pci_probe (device_t device)
-{
- u_int32_t type = pci_get_devid(device);
- struct _pcsid *ep =pci_ids;
-
- while (ep->type && ep->type != type)
- ++ep;
- if (ep->desc) {
- device_set_desc(device, ep->desc);
- return 0; /* If there might be a better driver, return -2 */
- } else
- return ENXIO;
-}
-
-static int
-${1}_pci_attach(device_t device)
-{
- int error;
- struct ${1}_softc *scp = DEVICE2SOFTC(device);
-
- error = ${1}_attach(device, scp);
- if (error)
- ${1}_pci_detach(device);
- return (error);
-}
-
-static int
-${1}_pci_detach (device_t device)
-{
- int error;
- struct ${1}_softc *scp = DEVICE2SOFTC(device);
-
- error = ${1}_detach(device, scp);
- return (error);
-}
-
-/*
- ****************************************
- * Common Attachment sub-functions
- ****************************************
- */
-static int
-${1}_attach(device_t device, struct ${1}_softc * scp)
-{
- device_t parent = device_get_parent(device);
- int unit = device_get_unit(device);
-
- scp->dev = make_dev(&${1}_cdevsw, 0,
- UID_ROOT, GID_OPERATOR, 0600, "${1}%d", unit);
- scp->dev->si_drv1 = scp;
-
- if (${1}_allocate_resources(device))
- goto errexit;
-
- scp->bt = rman_get_bustag(scp->res_ioport);
- scp->bh = rman_get_bushandle(scp->res_ioport);
-
- /* Register the interrupt handler. */
- /*
- * The type should be one of:
- * INTR_TYPE_TTY
- * INTR_TYPE_BIO
- * INTR_TYPE_CAM
- * INTR_TYPE_NET
- * INTR_TYPE_MISC
- * This will probably change with SMPng. INTR_TYPE_FAST may be
- * OR'd into this type to mark the interrupt fast. However, fast
- * interrupts cannot be shared at all so special precautions are
- * necessary when coding fast interrupt routines.
- */
- if (scp->res_irq) {
- /* Default to the tty mask for registration. */ /* XXX */
- if (BUS_SETUP_INTR(parent, device, scp->res_irq, INTR_TYPE_TTY,
- ${1}intr, scp, &scp->intr_cookie) == 0) {
- /* Do something if successful. */
- } else
- goto errexit;
- }
-
- /*
- * If we want to access the memory we will need
- * to know where it was mapped.
- *
- * Use of this function is discouraged, however. You should
- * be accessing the device with the bus_space API if at all
- * possible.
- */
- scp->vaddr = rman_get_virtual(scp->res_memory);
- return 0;
-
-errexit:
- /*
- * Undo anything we may have done.
- */
- ${1}_detach(device, scp);
- return (ENXIO);
-}
-
-static int
-${1}_detach(device_t device, struct ${1}_softc *scp)
-{
- device_t parent = device_get_parent(device);
-
- /*
- * At this point stick a strong piece of wood into the device
- * to make sure it is stopped safely. The alternative is to
- * simply REFUSE to detach if it's busy. What you do depends on
- * your specific situation.
- *
- * Sometimes the parent bus will detach you anyway, even if you
- * are busy. You must cope with that possibility. Your hardware
- * might even already be gone in the case of cardbus or pccard
- * devices.
- */
- /* ZAP some register */
-
- /*
- * Take our interrupt handler out of the list of handlers
- * that can handle this irq.
- */
- if (scp->intr_cookie != NULL) {
- if (BUS_TEARDOWN_INTR(parent, device,
- scp->res_irq, scp->intr_cookie) != 0)
- printf("intr teardown failed.. continuing\n");
- scp->intr_cookie = NULL;
- }
-
- /*
- * Deallocate any system resources we may have
- * allocated on behalf of this driver.
- */
- scp->vaddr = NULL;
- return ${1}_deallocate_resources(device);
-}
-
-static int
-${1}_allocate_resources(device_t device)
-{
- int error;
- struct ${1}_softc *scp = DEVICE2SOFTC(device);
- int size = 16; /* SIZE of port range used. */
-
- scp->res_ioport = bus_alloc_resource(device, SYS_RES_IOPORT,
- &scp->rid_ioport, 0ul, ~0ul, size, RF_ACTIVE);
- if (scp->res_ioport == NULL)
- goto errexit;
-
- scp->res_irq = bus_alloc_resource(device, SYS_RES_IRQ,
- &scp->rid_irq, 0ul, ~0ul, 1, RF_SHAREABLE|RF_ACTIVE);
- if (scp->res_irq == NULL)
- goto errexit;
-
- scp->res_drq = bus_alloc_resource(device, SYS_RES_DRQ,
- &scp->rid_drq, 0ul, ~0ul, 1, RF_ACTIVE);
- if (scp->res_drq == NULL)
- goto errexit;
-
- scp->res_memory = bus_alloc_resource(device, SYS_RES_MEMORY,
- &scp->rid_memory, 0ul, ~0ul, MSIZE, RF_ACTIVE);
- if (scp->res_memory == NULL)
- goto errexit;
- return (0);
-
-errexit:
- error = ENXIO;
- /* Cleanup anything we may have assigned. */
- ${1}_deallocate_resources(device);
- return (ENXIO); /* For want of a better idea. */
-}
-
-static int
-${1}_deallocate_resources(device_t device)
-{
- struct ${1}_softc *scp = DEVICE2SOFTC(device);
-
- if (scp->res_irq != 0) {
- bus_deactivate_resource(device, SYS_RES_IRQ,
- scp->rid_irq, scp->res_irq);
- bus_release_resource(device, SYS_RES_IRQ,
- scp->rid_irq, scp->res_irq);
- scp->res_irq = 0;
- }
- if (scp->res_ioport != 0) {
- bus_deactivate_resource(device, SYS_RES_IOPORT,
- scp->rid_ioport, scp->res_ioport);
- bus_release_resource(device, SYS_RES_IOPORT,
- scp->rid_ioport, scp->res_ioport);
- scp->res_ioport = 0;
- }
- if (scp->res_memory != 0) {
- bus_deactivate_resource(device, SYS_RES_MEMORY,
- scp->rid_memory, scp->res_memory);
- bus_release_resource(device, SYS_RES_MEMORY,
- scp->rid_memory, scp->res_memory);
- scp->res_memory = 0;
- }
- if (scp->res_drq != 0) {
- bus_deactivate_resource(device, SYS_RES_DRQ,
- scp->rid_drq, scp->res_drq);
- bus_release_resource(device, SYS_RES_DRQ,
- scp->rid_drq, scp->res_drq);
- scp->res_drq = 0;
- }
- if (scp->dev)
- destroy_dev(scp->dev);
- return (0);
-}
-
-static void
-${1}intr(void *arg)
-{
- struct ${1}_softc *scp = (struct ${1}_softc *) arg;
-
- /*
- * Well we got an interrupt, now what?
- *
- * Make sure that the interrupt routine will always terminate,
- * even in the face of "bogus" data from the card.
- */
- (void)scp; /* Delete this line after using scp. */
- return;
-}
-
-static int
-${1}ioctl (struct cdev *dev, u_long cmd, caddr_t data, int flag, struct thread *td)
-{
- struct ${1}_softc *scp = DEV2SOFTC(dev);
-
- (void)scp; /* Delete this line after using scp. */
- switch (cmd) {
- case DHIOCRESET:
- /* Whatever resets it. */
-#if 0
- ${UPPER}_OUTB(SOME_PORT, 0xff);
-#endif
- break;
- default:
- return ENXIO;
- }
- return (0);
-}
-/*
- * You also need read, write, open, close routines.
- * This should get you started.
- */
-static int
-${1}open(struct cdev *dev, int oflags, int devtype, struct thread *td)
-{
- struct ${1}_softc *scp = DEV2SOFTC(dev);
-
- /*
- * Do processing.
- */
- (void)scp; /* Delete this line after using scp. */
- return (0);
-}
-
-static int
-${1}close(struct cdev *dev, int fflag, int devtype, struct thread *td)
-{
- struct ${1}_softc *scp = DEV2SOFTC(dev);
-
- /*
- * Do processing.
- */
- (void)scp; /* Delete this line after using scp. */
- return (0);
-}
-
-static int
-${1}read(struct cdev *dev, struct uio *uio, int ioflag)
-{
- struct ${1}_softc *scp = DEV2SOFTC(dev);
- int toread;
-
- /*
- * Do processing.
- * Read from buffer.
- */
- (void)scp; /* Delete this line after using scp. */
- toread = (min(uio->uio_resid, sizeof(scp->buffer)));
- return(uiomove(scp->buffer, toread, uio));
-}
-
-static int
-${1}write(struct cdev *dev, struct uio *uio, int ioflag)
-{
- struct ${1}_softc *scp = DEV2SOFTC(dev);
- int towrite;
-
- /*
- * Do processing.
- * Write to buffer.
- */
- (void)scp; /* Delete this line after using scp. */
- towrite = (min(uio->uio_resid, sizeof(scp->buffer)));
- return(uiomove(scp->buffer, towrite, uio));
-}
-
-static int
-${1}mmap(struct cdev *dev, vm_offset_t offset, vm_paddr_t *paddr, int nprot)
-{
- struct ${1}_softc *scp = DEV2SOFTC(dev);
-
- /*
- * Given a byte offset into your device, return the PHYSICAL
- * page number that it would map to.
- */
- (void)scp; /* Delete this line after using scp. */
-#if 0 /* If we had a frame buffer or whatever... do this. */
- if (offset > FRAMEBUFFERSIZE - PAGE_SIZE)
- return (-1);
- return i386_btop((FRAMEBASE + offset));
-#else
- return (-1);
-#endif
-}
-
-static int
-${1}poll(struct cdev *dev, int which, struct thread *td)
-{
- struct ${1}_softc *scp = DEV2SOFTC(dev);
-
- /*
- * Do processing.
- */
- (void)scp; /* Delete this line after using scp. */
- return (0); /* This is the wrong value I'm sure. */
-}
-
-DONE
-
-cat >${TOP}/sys/${1}io.h <<DONE
-/*
- * Definitions needed to access the ${1} device (ioctls etc)
- * see mtio.h, ioctl.h as examples.
- */
-#ifndef SYS_DHIO_H
-#define SYS_DHIO_H
-
-#ifndef KERNEL
-#include <sys/types.h>
-#endif
-#include <sys/ioccom.h>
-
-/*
- * Define an ioctl here.
- */
-#define DHIOCRESET _IO('D', 0) /* Reset the ${1} device. */
-#endif
-DONE
-
-if [ ! -d ${TOP}/modules/${1} ]; then
- mkdir -p ${TOP}/modules/${1}
-fi
-
-cat >${TOP}/modules/${1}/Makefile <<DONE
-# ${UPPER} Loadable Kernel Module
-
-.PATH: \${.CURDIR}/../../dev/${1}
-KMOD = ${1}
-SRCS = ${1}.c
-SRCS += opt_inet.h device_if.h bus_if.h pci_if.h isa_if.h
-
-# You may need to do this is your device is an if_xxx driver.
-opt_inet.h:
- echo "#define INET 1" > opt_inet.h
-
-.include <bsd.kmod.mk>
-DONE
-
-echo -n "Do you want to build the '${1}' module? [Y]"
-read VAL
-if [ "-z" "$VAL" ]; then
- VAL=YES
-fi
-case ${VAL} in
-[yY]*)
- (cd ${TOP}/modules/${1}; make depend; make )
- ;;
-*)
-# exit
- ;;
-esac
-
-echo ""
-echo -n "Do you want to build the '${UPPER}' kernel? [Y]"
-read VAL
-if [ "-z" "$VAL" ]; then
- VAL=YES
-fi
-case ${VAL} in
-[yY]*)
- (
- cd ${TOP}/i386/conf; \
- config ${UPPER}; \
- cd ${TOP}/i386/compile/${UPPER}; \
- make depend; \
- make; \
- )
- ;;
-*)
-# exit
- ;;
-esac
-
-#--------------end of script---------------
-#
-# Edit to your taste...
-#
-#
diff --git a/share/examples/drivers/make_pseudo_driver.sh b/share/examples/drivers/make_pseudo_driver.sh
deleted file mode 100644
--- a/share/examples/drivers/make_pseudo_driver.sh
+++ /dev/null
@@ -1,435 +0,0 @@
-#!/bin/sh
-# This writes a skeleton driver and puts it into the kernel tree for you
-#
-# arg1 is lowercase "foo"
-# arg2 path to the kernel sources, "/sys" if omitted
-#
-# Trust me, RUN THIS SCRIPT :)
-#
-#
-#-------cut here------------------
-
-if [ "${1}X" = "X" ]
-then
- echo "Hey , how about some help here.. give me a device name!"
- exit 1
-fi
-if [ "X${2}" = "X" ]; then
- TOP=`cd /sys; pwd -P`
- echo "Using ${TOP} as the path to the kernel sources!"
-else
- TOP=${2}
-fi
-
-for i in "" "conf" "i386" "i386/conf" "dev" "sys" "modules"
-do
- if [ -d ${TOP}/${i} ]
- then
- continue
- fi
- echo "${TOP}/${i}: no such directory."
- echo "Please, correct the error and try again."
- exit 1
-done
-
-UPPER=`echo ${1} |tr "[:lower:]" "[:upper:]"`
-
-if [ -d ${TOP}/modules/${1} ]; then
- echo "There appears to already be a module called ${1}"
- echo -n "Should it be overwritten? [Y]"
- read VAL
- if [ "-z" "$VAL" ]; then
- VAL=YES
- fi
- case ${VAL} in
- [yY]*)
- echo "Cleaning up from prior runs"
- rm -rf ${TOP}/dev/${1}
- rm -rf ${TOP}/modules/${1}
- rm ${TOP}/conf/files.${UPPER}
- rm ${TOP}/i386/conf/${UPPER}
- rm ${TOP}/sys/${1}io.h
- ;;
- *)
- exit 1
- ;;
- esac
-fi
-
-echo "The following files will be created:"
-echo ${TOP}/modules/${1}
-echo ${TOP}/conf/files.${UPPER}
-echo ${TOP}/i386/conf/${UPPER}
-echo ${TOP}/dev/${1}
-echo ${TOP}/dev/${1}/${1}.c
-echo ${TOP}/sys/${1}io.h
-echo ${TOP}/modules/${1}
-echo ${TOP}/modules/${1}/Makefile
-
-mkdir ${TOP}/modules/${1}
-
-cat >${TOP}/conf/files.${UPPER} <<DONE
-dev/${1}/${1}.c optional ${1}
-DONE
-
-cat >${TOP}/i386/conf/${UPPER} <<DONE
-# Configuration file for kernel type: ${UPPER}
-
-files "${TOP}/conf/files.${UPPER}"
-
-include GENERIC
-
-ident ${UPPER}
-
-# trust me, you'll need this
-options KDB
-options DDB
-device ${1}
-DONE
-
-if [ ! -d ${TOP}/dev/${1} ]; then
- mkdir -p ${TOP}/dev/${1}
-fi
-
-cat >${TOP}/dev/${1}/${1}.c <<DONE
-/*
- * Copyright (c) [year] [your name]
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * ${1} driver
- */
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/kernel.h> /* SYSINIT stuff */
-#include <sys/uio.h> /* SYSINIT stuff */
-#include <sys/conf.h> /* cdevsw stuff */
-#include <sys/malloc.h> /* malloc region definitions */
-#include <sys/proc.h>
-#include <sys/${1}io.h> /* ${1} IOCTL definitions */
-
-#include <machine/clock.h> /* DELAY() */
-
-#define N${UPPER} 3 /* defines number of instances */
-
-/* XXX These should be defined in terms of bus-space ops. */
-#define ${UPPER}_INB(port) inb(port)
-#define ${UPPER}_OUTB(port, val) (port, (val))
-
-/* Function prototypes (these should all be static) */
-static d_open_t ${1}open;
-static d_close_t ${1}close;
-static d_read_t ${1}read;
-static d_write_t ${1}write;
-static d_ioctl_t ${1}ioctl;
-static d_mmap_t ${1}mmap;
-static d_poll_t ${1}poll;
-
-#define CDEV_MAJOR 20
-static struct cdevsw ${1}_cdevsw = {
- .d_version = D_VERSION,
- .d_open = ${1}open,
- .d_close = ${1}close,
- .d_read = ${1}read,
- .d_write = ${1}write,
- .d_ioctl = ${1}ioctl,
- .d_poll = ${1}poll,
- .d_mmap = ${1}mmap,
- .d_name = "${1}",
-};
-
-/*
- * device specific Misc defines
- */
-#define BUFFERSIZE 1024
-#define UNIT(dev) dev2unit(dev) /* assume one minor number per unit */
-
-/*
- * One of these per allocated device
- */
-struct ${1}_softc {
- u_long iobase;
- char buffer[BUFFERSIZE];
- struct cdev *dev;
-};
-
-typedef struct ${1}_softc *sc_p;
-
-static sc_p sca[N${UPPER}];
-
-/*
- * Macro to check that the unit number is valid
- * Often this isn't needed as once the open() is performed,
- * the unit number is pretty much safe.. The exception would be if we
- * implemented devices that could "go away". in which case all these routines
- * would be wise to check the number, DIAGNOSTIC or not.
- */
-#define CHECKUNIT(RETVAL) \
-do { /* the do-while is a safe way to do this grouping */ \
- if (unit > N${UPPER}) { \
- printf("%s: bad unit %d\n", __func__, unit); \
- return (RETVAL); \
- } \
- if (scp == NULL) { \
- printf("%s: unit %d not attached\n", __func__, unit); \
- return (RETVAL); \
- } \
-} while (0)
-
-#ifdef DIAGNOSTIC
-#define CHECKUNIT_DIAG(RETVAL) CHECKUNIT(RETVAL)
-#else /* DIAGNOSTIC */
-#define CHECKUNIT_DIAG(RETVAL)
-#endif /* DIAGNOSTIC */
-
-static int
-${1}ioctl (struct cdev *dev, u_long cmd, caddr_t data, int flag, struct thread *td)
-{
- int unit = UNIT(dev);
- sc_p scp = sca[unit];
-
- CHECKUNIT_DIAG(ENXIO);
-
- switch (cmd) {
- case DHIOCRESET:
- /* whatever resets it */
- (void)scp; /* Delete this line after using scp. */
-#if 0
- ${UPPER}_OUTB(scp->iobase, 0xff);
-#endif
- break;
- default:
- return ENXIO;
- }
- return (0);
-}
-
-/*
- * You also need read, write, open, close routines.
- * This should get you started
- */
-static int
-${1}open(struct cdev *dev, int oflags, int devtype, struct thread *td)
-{
- int unit = UNIT(dev);
- sc_p scp = sca[unit];
-
- CHECKUNIT(ENXIO);
-
- (void)scp; /* Delete this line after using scp. */
- /*
- * Do processing
- */
- return (0);
-}
-
-static int
-${1}close(struct cdev *dev, int fflag, int devtype, struct thread *td)
-{
- int unit = UNIT(dev);
- sc_p scp = sca[unit];
-
- CHECKUNIT_DIAG(ENXIO);
-
- (void)scp; /* Delete this line after using scp. */
- /*
- * Do processing
- */
- return (0);
-}
-
-static int
-${1}read(struct cdev *dev, struct uio *uio, int ioflag)
-{
- int unit = UNIT(dev);
- sc_p scp = sca[unit];
- int toread;
-
-
- CHECKUNIT_DIAG(ENXIO);
-
- /*
- * Do processing
- * read from buffer
- */
- toread = (min(uio->uio_resid, sizeof(scp->buffer)));
- return(uiomove(scp->buffer, toread, uio));
-}
-
-static int
-${1}write(struct cdev *dev, struct uio *uio, int ioflag)
-{
- int unit = UNIT(dev);
- sc_p scp = sca[unit];
- int towrite;
-
- CHECKUNIT_DIAG(ENXIO);
-
- /*
- * Do processing
- * write to buffer
- */
- towrite = (min(uio->uio_resid, sizeof(scp->buffer)));
- return(uiomove(scp->buffer, towrite, uio));
-}
-
-static int
-${1}mmap(struct cdev *dev, vm_offset_t offset, vm_paddr_t *paddr, int nprot)
-{
- int unit = UNIT(dev);
- sc_p scp = sca[unit];
-
- CHECKUNIT_DIAG(-1);
-
- (void)scp; /* Delete this line after using scp. */
- /*
- * Do processing
- */
-#if 0 /* if we had a frame buffer or whatever.. do this */
- if (offset > FRAMEBUFFERSIZE - PAGE_SIZE) {
- return (-1);
- }
- return i386_btop((FRAMEBASE + offset));
-#else
- return (-1);
-#endif
-}
-
-static int
-${1}poll(struct cdev *dev, int which, struct thread *td)
-{
- int unit = UNIT(dev);
- sc_p scp = sca[unit];
-
- CHECKUNIT_DIAG(ENXIO);
-
- (void)scp; /* Delete this line after using scp. */
- /*
- * Do processing
- */
- return (0); /* this is the wrong value I'm sure */
-}
-
-/*
- * Now for some driver initialisation.
- * Occurs ONCE during boot (very early).
- */
-static void
-${1}_drvinit(void *unused)
-{
- int unit;
- sc_p scp;
-
- for (unit = 0; unit < N${UPPER}; unit++) {
- /*
- * Allocate storage for this instance .
- */
- scp = malloc(sizeof(*scp), M_DEVBUF, M_NOWAIT | M_ZERO);
- if( scp == NULL) {
- printf("${1}%d failed to allocate strorage\n", unit);
- return;
- }
- sca[unit] = scp;
- scp->dev = make_dev(&${1}_cdevsw, unit,
- UID_ROOT, GID_KMEM, 0640, "${1}%d", unit);
- }
-}
-
-SYSINIT(${1}dev, SI_SUB_DRIVERS, SI_ORDER_MIDDLE+CDEV_MAJOR,
- ${1}_drvinit, NULL);
-DONE
-
-cat >${TOP}/sys/${1}io.h <<DONE
-/*
- * Definitions needed to access the ${1} device (ioctls etc)
- * see mtio.h , ioctl.h as examples
- */
-#ifndef SYS_DHIO_H
-#define SYS_DHIO_H
-
-#ifndef KERNEL
-#include <sys/types.h>
-#endif
-#include <sys/ioccom.h>
-
-/*
- * define an ioctl here
- */
-#define DHIOCRESET _IO('D', 0) /* reset the ${1} device */
-#endif
-DONE
-
-if [ ! -d ${TOP}/modules/${1} ]; then
- mkdir -p ${TOP}/modules/${1}
-fi
-
-cat >${TOP}/modules/${1}/Makefile <<DONE
-# ${UPPER} Loadable Kernel Module
-
-.PATH: \${.CURDIR}/../../dev/${1}
-KMOD = ${1}
-SRCS = ${1}.c
-
-.include <bsd.kmod.mk>
-DONE
-
-echo -n "Do you want to build the '${1}' module? [Y]"
-read VAL
-if [ "-z" "$VAL" ]; then
- VAL=YES
-fi
-case ${VAL} in
-[yY]*)
- (cd ${TOP}/modules/${1}; make depend; make )
- ;;
-*)
-# exit
- ;;
-esac
-
-echo ""
-echo -n "Do you want to build the '${UPPER}' kernel? [Y]"
-read VAL
-if [ "-z" "$VAL" ]; then
- VAL=YES
-fi
-case ${VAL} in
-[yY]*)
- (
- cd ${TOP}/i386/conf; \
- config ${UPPER}; \
- cd ${TOP}/i386/compile/${UPPER}; \
- make depend; \
- make; \
- )
- ;;
-*)
-# exit
- ;;
-esac
-
-#--------------end of script---------------
-#
-#edit to your taste..
-#
-#
diff --git a/tools/build/mk/OptionalObsoleteFiles.inc b/tools/build/mk/OptionalObsoleteFiles.inc
--- a/tools/build/mk/OptionalObsoleteFiles.inc
+++ b/tools/build/mk/OptionalObsoleteFiles.inc
@@ -1684,9 +1684,6 @@
OLD_FILES+=usr/share/examples/diskless/README.TEMPLATING
OLD_FILES+=usr/share/examples/diskless/clone_root
OLD_FILES+=usr/share/examples/dma/mailer.conf
-OLD_FILES+=usr/share/examples/drivers/README
-OLD_FILES+=usr/share/examples/drivers/make_device_driver.sh
-OLD_FILES+=usr/share/examples/drivers/make_pseudo_driver.sh
OLD_FILES+=usr/share/examples/dwatch/profile_template
OLD_FILES+=usr/share/examples/etc/README.examples
OLD_FILES+=usr/share/examples/etc/bsd-style-copyright
@@ -1913,7 +1910,6 @@
OLD_DIRS+=usr/share/examples/csh
OLD_DIRS+=usr/share/examples/diskless
OLD_DIRS+=usr/share/examples/dma
-OLD_DIRS+=usr/share/examples/drivers
OLD_DIRS+=usr/share/examples/dwatch
OLD_DIRS+=usr/share/examples/etc
OLD_DIRS+=usr/share/examples/etc/defaults

File Metadata

Mime Type
text/plain
Expires
Thu, Sep 17, 12:00 PM (4 h, 48 m)
Storage Engine
blob
Storage Format
Raw Data
Storage Handle
29729888
Default Alt Text
D50468.1789646449.diff (41 KB)

Event Timeline